[IM NOT RESPONSABLE BOUT PROBLEMS OR DAMAGES IN YOUR DEVICE USING THIS PROCEDURES!]
Im a photo enthusiast and i take a lot of care about my Nikon camera and its lenses to ensure its exelent quality and functionality. With my SGS I9000B isn't different!
I saw some dust inside my lenses and decided to clean it up because it interfere directly on the image quality.
In the cleaning process i scratched my SGS lenses from inside! (yes, using twizzers+loose cotton). Was a bad idea.
Thinking bout a replacement of entire housing, didnt find it at eBay because I9000B has a Digital TV antenna and a hole for it. Its a special housing.
Decided then to buy another international housing to take only the lenses, but no money at my paypal account :-(.
Without money, finally decided to take apart my dead Nokia N95-1 and use its CarlZeiss Vario Tessar lenses!!!!!
After opening the SGS again, take that steel frame that protects and decorates the camera lens was a boring process. Three bent fins through the housing, which are hidden by a plastic cover:
After removing this frame, I saw the lens is very well glued to the plastic. Which requires some work with tweezers to avoid damaging the substrate that has outline (it was used as a guide to the size of the new lens).
After that, I put a lens on the other (the N95 but is wider, same thickness) and made the cuts using a sharp scissors.
So now just put everything in place, clean the lens again, polishing and close the device.
Not intend to leave this lens for a long time. Only until i can buy the official Samsung (taken from a new housing).
This Nokia does not have enough glue to adhere to the plastic housing. This little space between the lens and the plastic inferfere directly in autofocus and the inhibition of reflexes = photo as ****!
The results:
Photo taken with SGS I9000B with my new lenses:
Hope this helps people that as me didnt found anything bout Samsung Galaxy I9000/I9000B camera glasses/lenses replace.
You liked? Plz click on Thanks button
Im a photo enthusiast and i take a lot of care about my Nikon camera and its lenses to ensure its exelent quality and functionality. With my SGS I9000B isn't different!
I saw some dust inside my lenses and decided to clean it up because it interfere directly on the image quality.
In the cleaning process i scratched my SGS lenses from inside! (yes, using twizzers+loose cotton). Was a bad idea.
Thinking bout a replacement of entire housing, didnt find it at eBay because I9000B has a Digital TV antenna and a hole for it. Its a special housing.
Decided then to buy another international housing to take only the lenses, but no money at my paypal account :-(.
Without money, finally decided to take apart my dead Nokia N95-1 and use its CarlZeiss Vario Tessar lenses!!!!!
After opening the SGS again, take that steel frame that protects and decorates the camera lens was a boring process. Three bent fins through the housing, which are hidden by a plastic cover:
After removing this frame, I saw the lens is very well glued to the plastic. Which requires some work with tweezers to avoid damaging the substrate that has outline (it was used as a guide to the size of the new lens).
After that, I put a lens on the other (the N95 but is wider, same thickness) and made the cuts using a sharp scissors.
So now just put everything in place, clean the lens again, polishing and close the device.
Not intend to leave this lens for a long time. Only until i can buy the official Samsung (taken from a new housing).
This Nokia does not have enough glue to adhere to the plastic housing. This little space between the lens and the plastic inferfere directly in autofocus and the inhibition of reflexes = photo as ****!
The results:
Photo taken with SGS I9000B with my new lenses:
Hope this helps people that as me didnt found anything bout Samsung Galaxy I9000/I9000B camera glasses/lenses replace.
You liked? Plz click on Thanks button
