• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[I9100G] LineageOS 14.1 Pre-Alpha Discussion [20170517]

Sidebar
A

adxamg

Senior Member
Apr 10, 2014
362
807
0
Apr 27, 2017 at 12:54 PM
I9100G - LineageOS 14.1 - ROM
Testing Thread

Here you will find current status and latest lineage test builds for i9100g (SII G).

Builds posted in this thread are highly experimental and may not boot at all.

Current status of lineage 14.1 for i9100g:
- After successfully booting lineage 13.0 rom on i9100g, this will be base for lineage 14.1 test builds; device tree/kernel needs several modifications, which will be applied, once phone will boot lineage 14.1

Downloads (experimental):
Download LineageOS 14.1 Test build (currently not available)
OpenGapps ARM, 7.1, Nano or Pico

Installation:
Full wipe recommended; at least system, data, cache.

Bootlog of lineage 14.1 i9100g test build 201705:
Code: 
SA_PHOENIX_START_CONDITION = 0x2

SA_PH_CFG_VBATLOWV = 0x0
SA_PH_CFG_VBATLOWV = 0x87
PHOENIX_LAST_TURNOFF_STS = 0x1

Secondary Bootloader v3.1 version.
Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
Board: GT-I9100G REV 03-REAL / Jan 25 2013 22:48:33

booting code=0x7ea39fea
=================================
loke_init: j4fs_open..success
<start_checksum:310>CHECKSUM_HEADER_SECTOR :42
<start_checksum:313>offset:42, size:1024
Not Need Movinand Checksum
load_lfs_parameters valid magic code and version.
switch_sel_str='1'
switch_sel_int='1'
load_debug_level: read debug level successfully(0x574f4c44)...LOW
init_ddi_data: usable ddi data.
reading nps status file is successfully!.
nps status=0x504d4f43
save param.blk, size: 5268
save param.blk successfully.
save switch_sel(1)...ok
save param.blk, size: 5268
save param.blk successfully.
save switch_sel(1)...ok
MLO update check bit is 0xea000007 - continue booting.... .
*** ld9040_power_on ***
*** ld9040_ldi_init ***
ld9040_read_lcd_id, LCD ID[0] :a2 
ld9040_read_lcd_id, LCD ID[1] :12 
ld9040_read_lcd_id, LCD ID[2] :11 
*** ld9040_ldi_enable ***

Autoboot (1 seconds) in progress, press any key to stop .

boot_kernel: debug level low!
checkbit: find RECOVERY
checkbit (ffffffff)
kernel is non signed binary.
save param.blk, size: 5268
save param.blk successfully.
save switch_sel(1)...ok

Starting kernel at 0x81808000...

[    0.240539] C0 [        swapper] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
[    0.546447] C0 [        swapper] omap_rproc_get_pool: dsp - no carveout memory is available at all
[    0.570678] C0 [        swapper] twl_reg twl_reg.63: Failed to set supply vmmc
[    0.570800] C0 [        swapper] twl_reg twl_reg.63: can't register REGEN1, -16
[    0.702697] C0 [        swapper] Keyboard driver not present
[    0.724212] C0 [        swapper] could not allocate slot
[    0.728240] C0 [        swapper] ramoops: The memory size and the record size must be non-zero
[    0.806762] C0 [        swapper] No CPUfreq policy at this point.
[    1.182434] C0 [        swapper] family = 0x81, variant = 0x1, version = 0x10, build = 170
[    1.292480] C0 [        swapper] [TSP] calibration success!!!
[    1.724609] C0 [        swapper] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0!
[    1.900573] C0 [        swapper] Power Management for TI OMAP4.
[    3.174468] C0 [           init] init: /init.rc: 61: invalid command 'load_system_props'
[    3.174743] C0 [           init] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
[    3.175048] C0 [           init] init: could not import file '/init.recovery.t1.rc' from '/init.rc'
[    3.182952] C0 [        healthd] healthd: wakealarm_init: timerfd_create failed
[    3.186096] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[    3.371551] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[    3.378234] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[    3.380126] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[    3.531280] C0 [           init] init: /dev/hw_random not found
[    3.532684] C0 [           init] init: /dev/hw_random not found
[    3.541168] C0 [           init] android_usb: already disabled
[    3.541809] C0 [           init] init: Unable to open persistent property directory /data/property errno: 2
[    3.541900] C0 [           init] init: Unable to open persistent property directory /data/property errno: 2
[    3.545928] C0 [           init] init: Warning!  Service recovery needs a SELinux domain defined; please fix!
[    3.546661] C0 [           init] android_usb: already disabled
[   22.188110] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[   34.870758] C0 [irq/281-fsa9480] fsa9480 4-0025: entering over-current protection
[   34.870819] C0 [irq/281-fsa9480] fsa9480 4-0025: exiting protection mode
[   35.437988] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[   38.909973] C1 [           init] android_usb: already disabled
[   55.504791] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[   61.002716] C1 [firmware/ducati] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
[   75.567596] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[   80.552856] C0 [           init] android_usb: already disabled
[   95.613830] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  115.665771] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  135.734924] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  155.784759] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  175.835052] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  195.914916] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  215.976867] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  236.044219] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  256.105438] C0 [        healthd] healthd: Could not open '/sys/class/power_supply/battery/batt_current_now'
[  288.942077] C0 [           init] SysRq : Emergency Remount R/O
[  289.408081] C0 [           init] lcd panel: [LCD] ld9040_power => [4, 4] called
[  289.425231] C0 [           init] Restarting system with command ''.
[  289.425354] C0 [           init] Restarting Linux version 3.0.31-CM-gcda8188 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sun Nov 20 14:02:12 CET 2016
[  289.425384] C0 [           init] 
SA_PHOENIX_START_CONDITION = 0x2

SA_PH_CFG_VBATLOWV = 0x87
SA_PH_CFG_VBATLOWV = 0x87
PHOENIX_LAST_TURNOFF_STS = 0x1

------------------------------
Starting kernel at 0x81808000...

[    0.240875] C0 [        swapper] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
[    0.548828] C0 [        swapper] omap_rproc_get_pool: dsp - no carveout memory is available at all
[    0.573822] C0 [        swapper] twl_reg twl_reg.63: Failed to set supply vmmc
[    0.573944] C0 [        swapper] twl_reg twl_reg.63: can't register REGEN1, -16
[    0.715026] C0 [        swapper] Keyboard driver not present
[    0.736572] C0 [        swapper] could not allocate slot
[    0.740753] C0 [        swapper] ramoops: The memory size and the record size must be non-zero
[    0.814727] C0 [        swapper] No CPUfreq policy at this point.
[    1.190338] C0 [        swapper] family = 0x81, variant = 0x1, version = 0x10, build = 170
[    1.300415] C0 [        swapper] [TSP] calibration success!!!
[    1.735290] C0 [        swapper] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0!
[    1.915832] C0 [        swapper] Power Management for TI OMAP4.
[    2.380249] C0 [           init] SELinux: avtab: invalid type or class
[    2.383605] C0 [           init] init: SELinux:  Could not load policy:  Invalid argument
[    2.383880] C0 [           init] init: failed to load policy: Invalid argument
[    2.383941] C0 [           init] init: Security failure; rebooting into recovery mode...
[    2.384674] C0 [           init] SysRq : Emergency Remount R/O
[    2.682525] C0 [           init] lcd panel: [LCD] ld9040_power => [4, 4] called
[    2.699462] C0 [           init] Restarting system with command 'recovery'.
[    2.699615] C0 [           init] Restarting Linux version 3.0.31-lineage-gc0acdca-dirty ([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 17 10:54:15 CEST 2017
[    2.699645] C0 [           init] 
SA_PHOENIX_START_CONDITION = 0x2


Testing/To do/Errors:
  • Analyse boot process; post a bootlog; for example with these commands in recovery: "dmesg > /sdcard/dmesg.txt" or "cat /proc/last_kmsg > /sdcard/last_kmsg.txt"

Changelog:
  • 20170525: Posted bootlog
  • 20170525: new info: twrp 3.1 recovery image from official site can be used on i9100g device too. Flash it to recovery partition as isorec recovery. ROM files need to be modified in order to be accepted at the moment.
  • 20170517: New test build

This post will be updated, when new information or test builds are available.


XDA:DevDB Information
[I9100G] LineageOS 14.1 Pre-Alpha Discussion, ROM for the Samsung Galaxy S II

Contributors
adxamg
Source Code: https://www.github.com/xdaamg

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS

Version Information
Status: Testing

Created 2017-04-27
Last Updated 2017-06-12
 
  • Like
Reactions: netzjunge, mohmedxpmpa, AhmAdDev99 and 5 others
T

TanDeny

Member
Jan 10, 2017
6
0
0
Apr 29, 2017 at 11:17 AM
Stuck

I have install this ROM, but in installation progress there are "unknow command", but the installation complete.
I Restart my S2 G and just stuck at Samsung Galaxy SII GT-I9100G (boot), and no looping. I restart again and get same result -_-
 
toppits

toppits

Senior Member
May 15, 2012
403
157
0
Apr 29, 2017 at 11:48 AM
Well, that's what happens if you don't read ANYTHING at all. Not sure what to say, only maybe: I saw that coming and thought about writing about that, but decided against it ..

Why are you repeating what's already in the OP, literally just above your posts. I'd say you can't read, but obviously you can write, so you must be dumb, no offence.
In my opinion your posts are spam and should be deleted by mods, I wouldn't be a good mod, I know. And yeah, my post is also spam.

On another not, thx adxamg for all your work. Since I have a new Smartphone I'll be happy to do some testing when the time for normal testing is there and I find the time.
 
Last edited:
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 7, 2017 at 9:30 PM
To be sure for the analysing of boot: will I be able to get a lot from boot now via USB cable and PC? I wouldn't know how to obtain a log other than that...

Gesendet von meinem SM-G930F mit Tapatalk
 
A

adxamg

Senior Member
Apr 10, 2014
362
807
0
May 8, 2017 at 11:46 AM
You will not get a connection to the phone with a standard usb cable. Thats why i tried it with a uart-usb cable. But also no luck with it so far. I just get early boot messages of x-loader.
Maybe someone else has an idea how to get a log in this case?
 
  • Like
Reactions: ze7zez
Z

ze7zez

Elite Member
Aug 24, 2012
2,711
1,316
113
Kraków
nz.geoview.info
May 9, 2017 at 4:25 PM
adxamg said:
You will not get a connection to the phone with a standard usb cable. Thats why i tried it with a uart-usb cable. But also no luck with it so far. I just get early boot messages of x-loader.
Maybe someone else has an idea how to get a log in this case?
Click to expand...
Although the processor OMAP 4430 (OMAP 4 Mobile Applications Platform) is old, it is worth writing in the TI forum.
A forum for the OMAP 4 is closed (read-only), but you can ask the question in another thematically similar department.
There is always a chance that someone will suggest.
 
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 9, 2017 at 4:41 PM
adxamg said:
You will not get a connection to the phone with a standard usb cable. Thats why i tried it with a uart-usb cable. But also no luck with it so far. I just get early boot messages of x-loader.
Maybe someone else has an idea how to get a log in this case?
Click to expand...
So I take it @arnab did not come up to you with yet another miraculous cure for the problem yet... I was really hoping he could give some hint... Well let's not give up...

Gesendet von meinem SM-G930F mit Tapatalk
 
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 11, 2017 at 8:17 AM
ze7zez said:
Although the processor OMAP 4430 (OMAP 4 Mobile Applications Platform) is old, it is worth writing in the TI forum.
A forum for the OMAP 4 is closed (read-only), but you can ask the question in another thematically similar department.
There is always a chance that someone will suggest.
Click to expand...
You seem to know your way round there perhaps even have an account there. Would you mind asking the techies over there if they have a clue as what could cure or problem?

Gesendet von meinem SM-G930F mit Tapatalk
 
A

adxamg

Senior Member
Apr 10, 2014
362
807
0
May 15, 2017 at 8:57 AM
McConnor said:
So I take it @arnab did not come up to you with yet another miraculous cure for the problem yet... I was really hoping he could give some hint... Well let's not give up...
Click to expand...
Yes, i did not get any input.
I suspect twrp 2.8.7 is also too old to handle android 7 roms. I will try to build latest twrp recovery.
 
Last edited:
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 16, 2017 at 5:43 PM
Just searched for it in the above mentioned forum and the thread that came up pretty much matches the situation @adxamg is confronted with.
It is marked as answered and a whole lot information is given - might that help?

http://e2e.ti.com/support/omap/f/849/t/181644?tisearch=e2e-quicksearch&keymatch=Boot%20OMAP

http://omapedia.org/wiki/Android_eMMC_Booting

Also there has been the suggestion in the CM13 thread to use the boot.img from an similar device of the Unlegay Project. As presumably drivers are missing this might be difficult. But what about other bootloader files of unlegacy roms - are they suitable (MLO, u-boot.img....) as described in the above article?

Pretty heavy tech I cannot quite understand. Perhaps adxamg can...
 
A

adxamg

Senior Member
Apr 10, 2014
362
807
0
May 19, 2017 at 9:44 AM
I read on those sites before, can't say i found a solution. Without access to a bootlog i can't do anything.
I tried to build latest twrp 3 recovery for i9100g -> build errors
Latest lineage 14.1 without twrp is buildable, but bootlooping.

It would need a guru in android/omap4/linux/kernel/hardware/lineage here ;)
 
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 19, 2017 at 10:17 AM
adxamg said:
I read on those sites before, can't say i found a solution. Without access to a bootlog i can't do anything.
I tried to build latest twrp 3 recovery for i9100g -> build errors
Latest lineage 14.1 without twrp is buildable, but bootlooping.

It would need a guru in android/omap4/linux/kernel/hardware/lineage here ;)
Click to expand...
@arnab: is that you he is talking about? [emoji1] - did you have any success in figuring out what might be amiss here?

Gesendet von meinem SM-G930F mit Tapatalk
 
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 23, 2017 at 5:38 PM
Where did you get TWRP 3.0.2.1 for our device from? Very eager to hear from your results...

Gesendet von meinem SM-G930F mit Tapatalk
 
A

Adrian-66

Member
Dec 31, 2015
21
18
0
May 23, 2017 at 6:04 PM
Okay this is not for the I9100G is for I9100!
This is fine work and have no error.
The twrk say this is I9100 and the LineageOS 14.1 is for I9100G no install is run.

Have replay from Backup what have make.
 
  • Like
Reactions: ze7zez
M

McConnor

Senior Member
Mar 28, 2013
456
150
0
May 23, 2017 at 6:13 PM
So this means twrp 3.xxx for the i9100 runs on our i9100g but is locked for the installation of our lineage rom? Could that be enabled?

Gesendet von meinem SM-G930F mit Tapatalk
 
A

Adrian-66

Member
Dec 31, 2015
21
18
0
May 23, 2017 at 6:49 PM
i can not make this.
@adxamg Please change the I9100G LinageOS 14.1 to the I9100 LinageOS 14.1 for testing for me?

and can look for boot check whit the new TWRP what have on my I9100G. The TWRP for the I9100 say you can not install the LineageOS for the I9100G.

or you make self? Install the OFFICIAL TWRP APP and flash the 3.0.2-1 on your Phone. Is work on my Phone.
 
Last edited:
  • Like
Reactions: ze7zez
A

Adrian-66

Member
Dec 31, 2015
21
18
0
May 23, 2017 at 10:16 PM
Okay have time and have patch your rom for me. Ich have patch and install the last LinegeOS 14.1 after install is boot and after boot screen from Samsung is new boot screen from Samsung and go to the Recover Mode. Sorry is no running. can not say have all make correct. This is the Bootlog .... i hope i can help.

__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 3.0.2-1 on Tue May 23 21:05:07 2017
(pid 115)
TW_NO_REBOOT_BOOTLOADER := true
I:CPU temperature file '/sys/devices/platform/s5p-tmu/temperature' not found, disabling CPU temp.
I:Lun file '/sys/class/android_usb/android0/f_mass_storage/lun0/file'
TW_HAS_DOWNLOAD_MODE := true
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/class/backlight/panel/brightness
I:Found brightness file at '/sys/class/backlight/panel/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:LANG: en
Starting the UI...setting DRM_FORMAT_RGB565 and GGL_PIXEL_FORMAT_RGB_565
Skipping drm graphics -- not present in build tree
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 16 .length = 8
vi.green.offset = 8 .length = 8
vi.blue.offset = 0 .length = 8
setting GGL_PIXEL_FORMAT_BGRA_8888
double buffered
framebuffer: 0 (480 x 800)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak
Moving /etc/twrp.fstab -> /etc/recovery.fstab
=> Processing recovery.fstab
I:processing '/boot'
I:processing '/recovery'
I:processing '/cache'
I:processing '/system'
I:processing '/data'
I:processing '/sdcard0'
I:Created '/sdcard0' folder.
I:processing '/sdcard1'
I:Created '/sdcard1' folder.
I:processing '/usbotg'
I:Created '/usbotg' folder.
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard0/.android_secure
I:mount -o bind '/sdcard0/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/sdcard0/TWRP/BACKUPS/cff19ae9c39863f'
I:Settings storage is '/sdcard0'
I:Decrypt adopted storage starting
I:pageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
I:failed to open ''
Updating partition details...
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...


Partition Logs:
/boot | /dev/block/mmcblk0p5 | Size: 8MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p5
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd

/recovery | /dev/block/mmcblk0p6 | Size: 8MB
Flags: IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd

/cache | /dev/block/mmcblk0p7 | Size: 98MB Used: 4MB Free: 94MB Backup Size: 4MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files

/system | /dev/block/mmcblk0p9 | Size: 1007MB Used: 525MB Free: 482MB Backup Size: 525MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p9
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files

/data | /dev/block/mmcblk0p10 | Size: 2015MB Used: 34MB Free: 1980MB Backup Size: 34MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk0p10
Length: -16384
Display_Name: Data
Storage_Name: Data
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files

/sdcard0 | /dev/block/mmcblk0p11 | Size: 11256MB Used: 3495MB Free: 7761MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage
Symlink_Path: /sdcard0/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: Internal-Storage
Storage_Name: Internal-Storage
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /sdcard0
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65537

/sdcard1 | /dev/block/mmcblk1p1 | Size: 15261MB Used: 6104MB Free: 9156MB Backup Size: 6104MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Display_Name: External-Storage
Storage_Name: External-Storage
Backup_Path: /sdcard1
Backup_Name: sdcard1
Backup_Display_Name: External-Storage
Storage_Path: /sdcard1
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538

/usbotg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usbotg
Backup_Name: usbotg
Backup_Display_Name: USB-OTG
Storage_Path: /usbotg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539

I:Loading package: TWRP (/sdcard0/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:pageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
I:pageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Unable to open '/sdcard'
I:Unable to open '/sdcard'
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/sdcard0/TWRP/BACKUPS/cff19ae9c39863f'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
I:Not using /misc, not defined in fstab.
I:Not using /misc, not defined in fstab.
Startup Commands:
ro.bq.gpu_to_cpu_unsupported=1
ro.cm.build.version.plat.rev=0
ro.cm.build.version.plat.sdk=2
ro.cm.device=i9100
ro.cm.display.version=12.1-20160425-UNOFFICIAL-i9100
ro.cm.version=12.1-20160425-UNOFFICIAL-i9100
ro.cm.releasetype=UNOFFICIAL
ro.sf.lcd_density=240
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.ftm=0
ro.boot.mode=reboot_recovery
ro.boot.console=ttySAC2
ro.boot.selinux=permissive
ro.boot.hardware=t1
ro.boot.serialno=cff19ae9c39863f
ro.boot.debug_level=0x4f4c
ro.boot.emmc_checksum=3
ro.twrp.boot=1
ro.twrp.version=3.0.2-1
ro.vold.primary_physical=1
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=exynos4
ro.build.id=LVY48F
ro.build.date=Mon Apr 25 14:12:48 EDT 2016
ro.build.date.utc=1461607968
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.flavor=cm_i9100-eng
ro.build.display.id=cm_i9100-eng 5.1.1 LVY48F 39d683fefc test-keys
ro.build.product=GT-I9100
ro.build.selinux=1
ro.build.version.sdk=22
ro.build.version.release=5.1.1
ro.build.version.codename=REL
ro.build.version.incremental=39d683fefc
ro.build.version.all_codenames=REL
ro.build.description=GT-I9100-user 4.1.2 JZO54K I9100XWMS2 release-keys
ro.build.fingerprint=samsung/GT-I9100/GT-I9100:4.1.2/JZO54K/I9100XWMS2:user/release-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Helium.ogg
ro.config.notification_sound=Argon.ogg
ro.dalvik.vm.native.bridge=0
ro.kernel.android.checkjni=1
ro.secure=0
ro.zygote=zygote32
ro.zygote.disable_gl_preload=true
ro.carrier=unknown
ro.cmlegal.url=https://cyngn.com/legal/privacy-policy
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.name=GT-I9100
ro.product.board=smdk4210
ro.product.brand=Samsung
ro.product.model=GT-I9100
ro.product.device=GT-I9100
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=samsung
ro.baseband=unknown
ro.bootmode=reboot_recovery
ro.hardware=t1
ro.opengles.version=131072
ro.revision=7
ro.serialno=cff19ae9c39863f
ro.telephony.call_ring.delay=3000
ro.telephony.call_ring.multiple=false
ro.telephony.ril_class=SamsungExynos4RIL
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=12.1-20160425-UNOFFICIAL-i9100
ro.rommanager.developerid=cyanogenmod
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
net.tethering.noprovisioning=true
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
rild.libargs=-d /dev/ttyS0
rild.libpath=/system/lib/ril-wrapper.so
twrp.crash_counter=0
twrp.action_complete=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.hwui.render_dirty_regions=false
media.sf.omx-plugin=libffmpeg_omx.so
media.sf.extractor-plugin=libffmpeg_extractor.so
dalvik.vm.isa.arm.features=default
dalvik.vm.heapsize=128m
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.heapmaxfree=2m
dalvik.vm.heapminfree=512k
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapstartsize=5m
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.image-dex2oat-filter=verify-none
dalvik.vm.heaptargetutilization=0.75
persist.sys.dun.override=0
persist.sys.usb.config=mtp,adb
persist.sys.dalvik.vm.lib.2=libart.so
persist.sys.root_access=0
persist.sys.isUsbOtgEnabled=true
persist.sys.recovery_update=false
service.adb.root=1
keyguard.no_require_sim=true
mobiledata.interfaces=pdp0,gprs,ppp0,rmnet0,rmnet1

I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:InfoManager loading from '/sdcard0/TWRP/.twrps'.
I:Backup folder set to '/sdcard1/TWRP/BACKUPS/cff19ae9c39863f'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:pageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/sdcard1/TWRP/BACKUPS/cff19ae9c39863f'
I:Enabling MTP during startup
I:Starting MTP
Starting MTP
I:sending message to add 65537 '/sdcard0' 'Internal-Storage'
I:Message sent, add storage ID: 65537
I:sending message to add 65538 '/sdcard1' 'External-Storage'
I:Message sent, add storage ID: 65538
MTP Enabled
I:Check_Lifetime_Writes result: '6212'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
created new mtpserver object
MtpServer::run fd: 19
mtppipe add storage 65537 '/sdcard0'
MtpStorage id: 65537 path: /sdcard0
mtppipe add storage 65538 '/sdcard1'
MtpStorage id: 65538 path: /sdcard1
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:eek:peration_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /sdcard1/recovery.log
Click to expand...
 
  • Like
Reactions: ze7zez and McConnor
You must log in or register to reply here.

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone