Idea to solve sim 2 and SD card

[baso2000]

I hope some one help me to get this Idea to whom care from any company of memories ( SanDisk or Kingston....etc ) or inside of hawuei company accessories Dept
....
Memory card same holder of sim card 2 .
This holder install director to mobile as same as old one ...
This holder build with memory card and space to install Sim card 2
This holder came with many size 64 GB or 32 GB or 128 GB
The face of holder came with many Color Gold , white , gray ......etc


This only way can work together Sim card and memory Card at same time

hope some one help me to reach this Idea

thanks
Can any one email me if have more idea .... [email protected]
or email me on private

 

[mensouille]

Hi,
it is already possible to do it (although I never tried) by modding your second sim as shown in this post: http://forum.xda-developers.com/showpost.php?p=56131654&postcount=68
Good luck!

 

[xphobic]

Hi,
it is already possible to do it (although I never tried) by modding your second sim as shown in this post: http://forum.xda-developers.com/showpost.php?p=56131654&postcount=68
Good luck!

Cannot be done. Wasted a good sim. The tray cant go in after the mod. Forcing it in will spoil the pin. I tried cannot work. Dont waste your time.

 

[WolwX]

Omg this mod is perfect, but how we can "take off" the copper from the plastic of the sim and be able to paste it again in the sd card ?

The problem is that, since it's impossible to simply paste the nano sim into the sd card, the width is to big and don't work in tray

How do you take of the copper from the plastic @getmobilephone ?

Dear ahmadcentral

Please ref to the attached photo. If you have further question, please post it here.

GetMobilePhone

 

[baso2000]

like this photo ....
the tray built with memory card and space to install SIM card 2

the question is does the Device working together sim 2 and SD same time ,... Its programming ?

 

[@ndrey]

Just make them slimmer nonprograming needed.
I made it with my sim and SD card.

 

[baso2000]

Just make them slimmer nonprograming needed.
I made it with my sim and SD card.

add photo to see

 

[@ndrey]

add photo to see

I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580

 

[baso2000]

I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580

I can not ready this Lang....
posted again here if would please

 

[hammody]

I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580

Hi Andrey,

I couldn't find your post in the link. could you please repost here in XDA.

Thanks

 

[@ndrey]

Hi Andrey,

I couldn't find your post in the link. could you please repost here in XDA.

Thanks

I used nailfile to make sim and microsd card thinner.
Sharpen it carefully step by step just to prevent them from becoming broken. Then put them together in the slot(it goes there not so smooth as before but now i have 2 simcards and sd operating together)
Results and rate of sharpening you can see on the photos.
Profit.
But be carefull - All that you do is your own risk.
Just for info I damaged one 64Gb card trying to do this.

 

[baso2000]

Sure are Using Mate 7 ??????
the holder not enough Sim Card and Memory Card together ,,,, if Make Thinner will Damage Sim Card or Memory >>
what tools did you Used it to Make Sim and memory more Thinner
Can please post hole this operation with Video link to Watch it
.....

 

[baso2000]

its impassible to do it that ... really ..
i tried sharpen memory card and sim card step by step demaging all of them . i tried after demaged to install them on trayer very high to inside them to solt not installing

 

[hammody]

I DID IT!

I used nailfile too

 

[stanlawren]

try the fire method

 

[tasar]

try the fire method

What is fire method?

 

[stanlawren]

What is fire method?

The fire method involves holding your Sim with a pair of pliers or scissors and heating the plastic part under the chip on a small flame ( matchstick, lighter, candle flame etc) to separate the gold chip from the plastic and gluing the chip to your SD card. Sounds weird but works 100% if you do it well

 

[tasar]

Thanx, i test it immediately and it seems to work Look at pictures. Now i need the Dual Mate 7

 

[stanlawren]

Thanx, i test it immediately and it seems to work Look at pictures. Now i need the Dual Mate 7

You're welcome

 

[hammody]

I tried the lighter method and it actually better than the nail file. The plastic and the glue will melt and you can easily take off the chip.