most of the users are facing lost imei problem....
so here is the solution...
first of all go to the dial menu of your mtk device.
1. enter *#*#3646633#*#* (this will make u enter in engineer mode)
2. select CDS information.
3. select radio information.
4. nw select phone 1 or 2 whosesoever's imei no. you want to change or fix.
5. nw type - 1st imei - AT+EGMR=1,7,"IMEI"
2nd imei - AT+EGMR=1,10,"IMEI"
6. then hit send command and reboot
congratulation You have fixed the bug.
In some devices it shows an error like "cannot be used in user build"
1. so this condition.... the easiest solution is to Give space after "AT+"
like:- AT+ EGMR=1,7"987879678564556"
remember 1 thing EMEI no. must be of 15 letters.....
Thankyou
-Navneet Singh :laugh:
so here is the solution...
first of all go to the dial menu of your mtk device.
1. enter *#*#3646633#*#* (this will make u enter in engineer mode)
2. select CDS information.
3. select radio information.
4. nw select phone 1 or 2 whosesoever's imei no. you want to change or fix.
5. nw type - 1st imei - AT+EGMR=1,7,"IMEI"
2nd imei - AT+EGMR=1,10,"IMEI"
6. then hit send command and reboot
congratulation You have fixed the bug.
In some devices it shows an error like "cannot be used in user build"
1. so this condition.... the easiest solution is to Give space after "AT+"
like:- AT+ EGMR=1,7"987879678564556"
remember 1 thing EMEI no. must be of 15 letters.....
Thankyou
-Navneet Singh :laugh:
