iMito MX1 Dual Core TV BOX RK3066 1.6GHz Cortex A9 1GB RAM 8G ROM HDMI

[AnacoN]

Hi Guys, i have a problem on my imito MX1.

I have this problem on last 2 weeks. When i try to open my mx1 i seen usualy this black screen... I did factory reset but didn't change anything. And when mx1 opening normal, i can do everything without any problem... I have stock rom with root. How can i fix this problem, do you have a idea?

 

[cac1031]

How to flash rom in already rooted device

Hi, I was looking at your instructions and I'm not sure if the bottom note applies. The seller sent me the imito already rooted and with Bob's rom 1.5 installed. I need to flash 1.7 to get the bluetooth working, I believe. Can I just download the rom and change the name as you indicated at the end, or do I need to install Rockusbdriver and flash tool? I would really appreciate it if you could direct me to some instructions for what I need to do.

Thanks.

 

[hidelinetr]

Hello fellow stick users. I have a small question I didn't see in the comments. I run out of room very quickly. How can I get the apps to install to the SD partition instead of the regular memory? I tried going to applications manager and moving to SD card but from what i remember being on the gs3, that feature is no longer supported.. I'm confused why it splits the memory up but installs everything to the smaller partition. I don't want to buy an SD card for this thing because all I use it for is streaming and light gaming when I'm bored so help a guy out please. I'm on 4.1.1 stock unrooted mx1

you can try Linktosd program. its working great on my xperia ray android phone. but you need to root your stick first.

 

[Afrika.Rasta]

Imito MX1 kasty-rom repack

Hi!
Really need you to help me repack current kasty rom 4.1.1 with new splash screen and bootanimation. I'm ready to pay, really need someone who can do it.
Thank you.

 

[Exlo]

iMito MX1/MX2 just got Android 4.2 update

http://blog.geekbuying.com/index.ph...get-android-4-2-updatefirmware-download-here/

 

[jjwalker2]

iMito MX1/MX2 just got Android 4.2 update

http://blog.geekbuying.com/index.ph...get-android-4-2-updatefirmware-download-here/

Awesome! Thanks for the heads up.

 

[2stardiver]

I have unrooted mx1 yet. but I was going to install finless rom 1.7, but now this 4.2. appeared. Do I have root somehow mx1 before installing 4.2 ?

Sent from my Nexus 7 using Tapatalk HD

 

[jjwalker2]

I have unrooted mx1 yet. but I was going to install finless rom 1.7, but now this 4.2. appeared. Do I have root somehow mx1 before installing 4.2 ?

Sent from my Nexus 7 using Tapatalk HD

I don't think so. Following the instructions on the website should get you there. You can root after installing it to gain those privileges again. I will try flashing the 4.2 rom tonight.

 

[2stardiver]

I don't think so. Following the instructions on the website should get you there. You can root after installing it to gain those privileges again. I will try flashing the 4.2 rom tonight.

How did your flashing went?

Sent from my Nexus 7 using Tapatalk HD

 

[jjwalker2]

How did your flashing went?

Sent from my Nexus 7 using Tapatalk HD

Went well. I was using a filess rom and did no unrooting or anything prior to flashing the 4.2 The only issue I had was windows 8. I had to use my win 7 pc to flash. Otherwise the instructions were good to follow. The rom itself seems to be working well. If I come across any issues I'll post them. If you need help or have any questions I'll answer what I can.

 

[theadb]

Went well. I was using a filess rom and did no unrooting or anything prior to flashing the 4.2 The only issue I had was windows 8. I had to use my win 7 pc to flash. Otherwise the instructions were good to follow. The rom itself seems to be working well. If I come across any issues I'll post them. If you need help or have any questions I'll answer what I can.

Did you root again after flashing? If so do you have a resource to follow?

 

[jjwalker2]

Did you root again after flashing? If so do you have a resource to follow?

Yes I did. The method I used was either here or on the freaktab forum. I'll check when I get home.

 

[2stardiver]

I cannot get install 4.2 or neither finless.
strange was that in reset button hole I didnt find any hard what to push. so I did open whole stick. and reset button is another side board than hole.
well I did try to push it and plug usb otg same time but nothing happened.

I did manage to root MX1 by this instruction
http://blog.geekbuying.com/index.php/2012/12/18/how-to-root-imito-mx1-imito-mx2/#.UYzBykkZW1E

edit: Success!
I disabled usb debugging and enabled USB \ connect PC now in batch tool number 1 turns to pink.
pressed switch button in batch tool, screen in mX1 went to blac,k and it didnt find any driver. searched driver from RKbatchtool directory and after install it turned to green.
then just find update.img and push restore.
And your done.

 

[jjwalker2]

I cannot get install 4.2 or neither finless.
strange was that in reset button hole I didnt find any hard what to push. so I did open whole stick. and reset button is another side board than hole.
well I did try to push it and plug usb otg same time but nothing happened.

I did manage to root MX1 by this instruction
http://blog.geekbuying.com/index.php/2012/12/18/how-to-root-imito-mx1-imito-mx2/#.UYzBykkZW1E

edit: Success!
I disabled usb debugging and enabled USB \ connect PC now in batch tool number 1 turns to pink.
pressed switch button in batch tool, screen in mX1 went to blac,k and it didnt find any driver. searched driver from RKbatchtool directory and after install it turned to green.
then just find update.img and push restore.
And your done.

Awesome. I was going to suggest that the swith button in the tool puts it into the same mode as holding the reset button. This is the same way I have done it before.

 

[johnakritidis]

gaming on imito mx1

hi guys i would to ask if anyone can play the games below on imito mx1, on some games as
Hills of Glory 3D
Wind-up Knight
temple run
and others i cannot even start the game the buttons are not active.
Also how can you boot the device using a wifi keyboard ?

Thanks in advance

Imito MX1 4.1.1.

 

[theadb]

Anyone looking for a cool boot ani: http://db.tt/2JW6Miiw

Original Thread: http://forum.xda-developers.com/showthread.php?t=2201408&page=14

 

[theadb]

PS - anyone having issues with Netflix after the update? I get various connection errors and when it does connect the video is scrambled. Every other video app is working fine.

Sent from my Nexus 10 using xda premium

 

[kruuth]

Is there a way to hide the controls at the bottom of the screen?

 

[shiny shoes]

Well, like a lot of questions in this thread, I dont know which one to buy.
Everybody recomends MK809 II or iMito. But I cant decide which one.

I really dont care about xbmc but Im going to be happy if it works. Im thinking of using a notebook HDD with a usb enclosure so I have no problem with wifi steaming at home.

Save me!

I guess iMito MX1 is "half a point" ahead. Ive read there is stock Android 4.2 and a bigger comunity maybe? Its the first media player im buying so I have no idea.
Is it true that 5.1 audio is not working? What if Im using a yamaha AV receiver? I watch .m2ts and .mkv movies.

 

[theadb]

I flashed Finless 2.0 as well as stock 4.2.2 on my MX1 and neither of them work with the Netflix app. The video is garbled (reminiscent of scribblies). Flashed back to stock 4.1.1 and it works fine. Guess I'll try Finless 1.5 since it's based on 4.1.1 to at least get root and some additional optimizations.

On a side note - What launchers/cool setups are you guys using? Would love to get some more ideas.