Increase System Partition In A110Q

[email protected]

Senior Member
Aug 17, 2013
595
2,190
0
Mumbai
:)Increase System Partition Of MMX Canvas 2+:)


This why am posting because in many times we never get full Rom due to system partition less and many developer also decrease lots of system apps which are usefull.
Hence, I Thought lets increase system storage. So, here is the procedure to follow it.


FAQ

1. IS THIS SAFE FOR CANVAS 2+ ?

-> YES,IT'S TOTALLY SAFE.

2. IS THIS EFFECT TO INTERNAL STORAGE ?
->NO,THIS IS LIKE COMPUTER HARD DISK HOW WE CAN MANAGED IT'S PARTITION.

3. HOW TO REVERT IT BACK ?
->DOWNLOAD STOCK MMX ROM FROM http://www.a110q.in/2013/06/stock-rom-for-micromax-canvas-2-plus.html AND FLASH IT.​


REQUIREMENT

1. COMPUTER

2. SOME KNOWLEDGE ABT COMPUTER.

3. SP FLASH TOOL

4. ROOTED MMX CANVAS 2+ ( ONLY FOR BACKUP IMEI, U CAN ALSO USE MTK DROID TOOLS TOO BACKUP IMEI TOO. )

5. DRIVERS OF MMX CANVAS 2+


->DOWNLOAD LINK<-

1. SP FLASH TOOL LINK http://d-h.st/Q96

2. SYSTEM INCREASING FILE LINK http://d-h.st/kAL

3. DRIVERS LINKhttp://d-h.st/UDf


4. IF ABOVE DRIVERS NOT WORKED DOWNLOAD THIS DRIVER AND INSTALL LINK http://d-h.st/5or


NOTES

1. PLEASE BACKUP UR ALL DATA FILES ETC. FROM CELL BECAUSE IT'S GOING TO BE FORMAT.

2. YOU MAY LOOSE UR IMEI BUT DON'T PANIC SEE DOWN TO BACKUP IMEI.

3. DON'T NEED TO DOWNLOAD CWM RECOVERY I'VE INCLUDED IN IT.


-> IMPORTANT STEPS TO FOLLOW ( COMPULSORY ) <-


* IF U CELL ROOTED THEN DO THIS TO BACKUP UR IMEI AND WHENEVER U WILL GET INVALID IMEI U CAN USE FROM Ur CELL ONLY *

1. DOWNLOAD ROOT EXPLORER APPS OR ANY ROOT BROWSER U PREFER

2. GO TO THIS LOCATION DATA (IF ASK SU GRANT IT TO SEE THIS LOACTION )>ROOT>DATA>NVRAM>MD>NVRAM>NMD_IMEI>MP0B_001 ( COPY THIS FILE IN UR SD CARD OR IN PC AS THIS FILE U CAN USE UNLIMITED TIMES TO RESTORE IMEI WHENEVER U GET INVALID IMEI) ( MAKE SURE COPY THIS FILE WHEN U R NOT FACING INVALID IMEI).

3. TO RESTORE IMEI IN ANY ROM OR STOCK ROM ( SIMPLY ROOT THE ROM)

4. FROM STEP 2 COPY THAT FILE ( MP0B_001)

5. THEN GO TO THIS LOCATION USING ROOT EXPLORER DATA (IF ASK SU GRANT IT TO SEE THIS LOACTION )ROOT>DATA>NVRAM>MD>NVRAM>NMD_IMEI>PASTE IT HERE AND REPLACE WITH OTHER ONE (FROM STEP 4).

6. NOW SET PERMISSION TO
OWNER R-W-E( execute)
GROUP R-E-
OTHER R-E-


7. NOW REBOOT..

8. UR INVALID IMEI WAS SOLVED AND ENJOY...

* ALTERNATIVE METHOD IS USE MTK DROID TOOL SOFTWARE.*


************ PROCEDURE *************


1. INSTALL DRIVER ( WHICH WAS DOWNLOADED FROM DOWNLOAD LINK ABOVE)

Switch off your phone
Open device manager
Connect your phone in OFF state
There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files given above

THIS WILL NOT WORK ON WINDOWS 8, SO FOLLOW THIS:

Download files from above link
Hover pointer to Top Right corner of your screen, choose Settings from sidebar
Click last option "Change PC Settings"
Select "General"
Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
Once screen is back, select option "Troubleshoot"
Select "Advanced Options"
Select "Startup Settings"
Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.


2. MAKE A NEW FOLDER AND EXTRACT THE FILE MMX_SYSTEM_880.RAR USING WINRAR OR ANY OTHER ON NEW FOLDER.( WHICH WAS DOWNLOADED FROM ABOVE LINK)

3. NOW OPEN SP FLASH TOOL ( WHICH WAS DOWNLOADED FROM ABOVE LINK )


4. CLICK ON SCATTER LOADING AND BROWSE TO NEW FOLDER ( IN STEP 2) AND SELECT MT6589_ANDROID_SCATTER_EMMC.TXT


5. CLICK ON FORMAT AND SELECT FORMAT WHOLE FLASH AND CHECK VALIDATION AND CLICK OK


6. NOW CONNECT UR CELL ( WITHOUT BATTERY) IT WILL SHOW DARK GREEN AFTER UR CELL FORMATTED.


7. NOW REMOVE UR CELL FROM PC.

8. NOW CLICK ON DOWNLOAD IN SP FLASH TOOL and SELECT YES.


9. CONNECT UR CELL (WITHOUT BATTERY) AND CLICK ON DOWNLAOD TO COMPLETE THE PROCESS (MAKE SURE U INSTALLED DRIVER PROPERLY). DON'T INTERRUPT THE PROCESS .


10. AFTER FINISH FLASHING GREEN CIRCLE WILL SHOW.


11. NOW REMOVE UR CELL.

12. GO TO RECOVERY BY PRESSING VOLUME( -) WITH VOLUME ( + ) AND PRESS POWER KEY

13. SELECT RECOVERY MODE BY PRESSING POWER KEY

14. AGAIN 3 OPTION WILL SHOW SELECT 1 (RECOVERY )

15. NOW U CAN GO TO CWM AND FLASH UR CUSTOM OR STOCK ROM ( DON'T RESTORE UR ANY BACKUPED ROM )

16. NOW REBOOT AFTER INSTALLATION AND ENJOY UR ROM WITH INCREASES SYSTEM PARTITION UPTO 880MB...

17. IF ANYONE GOT INVALID IMEI USE (IMPORTANT STEPS TO FOLLOW STEP FROM ABOVE) OR MTK DOID TOOL.

18. NOW ENJOY.....




IMPORTANT LINKS
1) Make Your Own Imei Patch : http://forum.xda-developers.com/micromax-canvas-2/general/guide-make-imei-patch-t2649354
2) Download this Stock V1 rooted apps with removed all firmware and install it : http://d-h.st/mZO
3) http://forum.xda-developers.com/mic...permanent-solution-imei-t2579994/post48715948

AM NOT RESPONSIBLE OF ANY MOBILE DAMAGED OR ANY WAR BEGIN....
 

Attachments

Last edited:

YPG70

Senior Member
Apr 2, 2013
335
33
0
Please Help me, phone not booting the ROM, or Recovery Mode. I did all the steps correctly. The green circle also came up, but Phone not booting.
 

djkrish5610

Senior Member
Nov 18, 2011
132
28
0
Mumbai
i Tried this procedure
After formatting when i started re plugged d device n clicked on download & its searchng device after dat it detected device as Single Port Use instead of Vcom driver
& i stuck at 100% downloading in red bar for 30mins i left still is same no response at all.....

Device Soft Bricked Can Sumone help me where i got wronggg

I checked my CanvasHD whether Drivers are Correct its working fine
CanvasHD detecting as Vcom [ com7 ] but
Canvas 2plus detecting as Single port [ com7 ]

HELP NEEDED PLZZZZZZZZZ
 

vijayar

Senior Member
Oct 2, 2011
294
80
0
Bangalore
Hi Manish,

Thanks for the method can you guide as to how you created re partition file in the first place ? I would like to replicate this for my MTK6577 phone, guess your file will not work since it is MMx specific. Thanks
 

[email protected]

Senior Member
Aug 17, 2013
595
2,190
0
Mumbai
Hi Manish,

Thanks for the method can you guide as to how you created re partition file in the first place ? I would like to replicate this for my MTK6577 phone, guess your file will not work since it is MMx specific. Thanks
provide me ur stock rom link and which cell u using

Sent from my Nexus 4 using XDA Premium 4 mobile app
 

vijkap

Senior Member
Mar 14, 2011
79
6
0
Please Help...

I tried this procedure

After formatting, I clicked on download & plugged in the device. It remained stuck at 100% downloading with red for sometime and then opened a window with some error suggesting pressing some key combination and to look at error log.

I am stuck, please help...

BTW my phone had ..._MMX_16_flasher_user as build number. I believe it stock ROM v2 and this method is meant for on my phone.
 
Last edited:

rkharat98

Senior Member
Sep 28, 2013
165
13
0
22
Pune, Maharashtra, India
Will this work on Canvas HD A116 MT6589…… running Stock AOSP 4.2.1 JB..
or i have to replace the Userdata, sec_ro, recovery, boot.img, uboot, etc of my stock ROM....
Or just by flashing those EBR1 & EBR2 files will work....
Plz reply...
 

nice_guy75

Senior Member
Mar 29, 2012
297
73
0
OP, please inform members to take backup of their MAC IDs and Bar code as well. After formatting with SP Flash tool, all their MAC IDs and Bar code would be erased as well. but I guess you have forgotten to mention anything about MAC IDs and bar code.
 

[email protected]

Senior Member
Aug 17, 2013
595
2,190
0
Mumbai
OP, please inform members to take backup of their MAC IDs and Bar code as well. After formatting with SP Flash tool, all their MAC IDs and Bar code would be erased as well. but I guess you have forgotten to mention anything about MAC IDs and bar code.
Thanks for ur remember i will edit the thread tommorrow

Sent from my A110Q using XDA Premium 4 mobile app
 

rkharat98

Senior Member
Sep 28, 2013
165
13
0
22
Pune, Maharashtra, India
make a zip of A116 stock rom (sp tool) of all file except android.img and give me i will post this for a116

Sent from my A110Q using XDA Premium 4 mobile app
Okay.. I wil do it...

Sent from my Micromax A116 using XDA Premium 4 mobile app

---------- Post added at 08:16 AM ---------- Previous post was at 07:18 AM ----------

make a zip of A116 stock rom (sp tool) of all file except android.img and give me i will post this for a116

Sent from my A110Q using XDA Premium 4 mobile app
Yes..
https://docs.google.com/file/d/0B7B3CRNZZhiQZVNRbUFodW12VHc/edit?usp=docslist_api
This is it.. No system.img included...

Sent from my Micromax A116 using XDA Premium 4 mobile app