no will be trying it after some time. as soon as it will get change will surely give a post about it
[INDEX][Osprey][Merlin] Moto G Factory Firmware Images
- Thread starter lost101
- Start date
when i flash the partition it say Preflash validation failed.
Please help
Please help
when i flash the partition it say Preflash validation failed.
Please help
System is preventing you from downgrading firmware.. If U have twrp installed then clear everything excluding sd card and then install
I have already mentioned in above post.. If you are having partion problem then u must wipe data so that you can downgrade to older build from newer
Except extSdCard and OTG all other as per I know should be ticked
will it also lock the bootloader again? will i recieve updates again?? the official moto updates
I tried that but it still not installing the downgraded version
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
I tried doing that formating data but it is not getting installed
I never face such problem during downgrading.. I would recommend you to install any custom rom and then install downgrade build.. Not sure but may work
I tried that too but its of no use it showed the same prblm
Strange.... I have switched multiple times between these two and never ever faced such problem.. Don't know what's wrong with you... I don't have laptop with me right now to show you as a proof making official
Can you please elaborate me how you are downgrading
See as u said flashed the twrp after that get into wipe in that there is an option advance in that I select all the things except my sd card n then I swipe aftr that when I was going to reboot it showed that there is no os installed aftr that I switch off my phone n get to the fastboot mode then I simple used the procedure for installing stock rom
Preflash validation failure occurs when you have a newer bootloader over your old bootloader. In that case,what you have to do is,skip the commands:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Use the rest of the commands and you will be fine. Use this method only when you are trying to flash an older build and you have this 'preflash validation error' issue.
Last edited:
OK I will give it a try. Let's see what happensPreflash validation failure occurs when you have a newer bootloader over your old bootloader. In that case,what you have to do is,skip the commands:
fastboot flash partition gpt.bin
fastboot bootloader bootloader.img
Use the rest of the commands and you will be fine. Use this method only when you are trying to flash an older build and you have this 'preflash validation error' issue.
Okay.OK I will give it a try. Let's see what happens
Let me know the results. BTW,the second command to skip is: fastboot flash bootloader bootloader.img
I missed the 'flash' when I first commented it. My mistake.
for doing this i have to unlock the boatloader..???Okay.
BTW,the second command to skip is: fastboot flash bootloader bootloader.img
I missed the 'flash' when I first commented it. My mistake.
You do understand that even if you system status says official, your warranty is still void, right? So why are you trying to get back to official status so bad?
When you request an unlock code, your warranty is void, even if you don't actually unlock your phone... It is clearly spelled out in the T&C. The System Status is not relevant, your device's warrant is void if you got an unlock code from Motorola... Now, if you found a way to unlock without getting a code from Moto that would be different but there currently isn't a way to do that.
Sent from my MotoG3 using Tapatalk
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone