INFINIX NOTE 10 PRO (X695/X695C/X695D) UBL, TWRP 3.6.1 & ROOT
- Thread starter rama982
- Start date
It's weird, I've unlocked several times and no problems. How did you unlock it?What commands did you write?
So the drivers are not installed, you need to install all the drivers, as you will find on the Internet
yang terbaru bisa gan... ane dah berhasil, mau root malah bootloop state oren.. bingung blm jadi2 di flash
i already tried it sir. but when i press vol up + power button it said no command. how to go to fastboot mode to install twrp?
That's right, when the inscription "no command" appears, you need to press and hold the power button, and press the volume plus. Sometimes it may not work out the first time. And in fastbооt, you need to press and hold the power button and the volume minus
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
3All steps is already done in my own phone, firmware version X695C_V513 with October security patch. and X695C_V531 with Desember security patch.
PREPARING
DOWNLOAD ATTACHED FILE
UNLOCKING BOOTLOADER
After unlocking the bootloader, your internal storage will be WIPED.
1. Unlock developer options, first go to Settings -> My Phone then tap Build Number 7 times.
2. Go to System -> Developer Option and enable OEM unlocking
3. On PC extract downloaded files then open DriverInstall.exe and install it
4. Plug your phone into PC and run "cmd-here.exe" on your PC.
5. Now type
there will be a confirmation popup, tap Allow.
2. Type
Wait until there is a USB logo with Fastboot text on your phone.
3. Type
Then press Volume UP on your phone to confirm.
After done, type
4. Your phone will reboot and you need to set up again
INSTALLING TWRP
Luckily this phone already has twrp with proper decryption support.
MAKE SURE YOU UNLOCKED BOOTLODER
NOTES: Please reade README.txt on the archive
1. Download and extract required files
2. Connect your phone into fastboot mode
3. Run "cmd-here.exe" from before on your PC.
4. Confirm if device is connected, type
5. Flash the patched boot.img
6. MUST disable vbmeta boot verification
7. Unplug and verify, do reboot to recovery with power + vol up combination.
FOR TWRP BETA_2 UPDATE:https://forum.xda-developers.com/t/infinix-note-10-pro-x695-x695c-x695d-ubl-twrp-3-6-0-root.4372489/post-86207893
FOR TWRP 3.6.1 UPDATE: https://forum.xda-developers.com/t/...95d-ubl-twrp-3-6-0-root.4372489/post-86913357
ROOTING
Just download Magisk-v23.apk and install inside twrp
ALSO IF YOU ENCOUNTER BOOTLOOP AFTER INSTALLING MAGISK DO FORMAT DATA IN TWRP THEN UPDATE GOOGLE PLAY SYSTEM TO LATEST PATCH FIRST AND AFTER THAT CONTINUE OPEN MAGISK MANAGER.
LINKS
TWRP source: https://github.com/rama982/twrp_device_infinix_x659c2
Guys it worked...for the first time able to root my MTK infinix note 10 pro device with the ease of rooting an Snapdragon device. Thank you very much!!
after installing magisk manager tried to install pixelify magisk module. It didnt work and got in to bootloop. So again falshed the boot_twrp boot imsage via twrp and phone again.
Planning to put pixel launcher in to system partition and see how it goes. Anyway to fully remove XOS launcher while retaining the recents functionality??2
great, but first of all i'll tell what Google radically changed for community
Flashed Successfully on v988 ! 
( STOCK ROM = X695-H854DEFGHI-R-GL-210927V988.zip )
Truly Great Work 'rama982' !!!
#
However, i can not see 'System' partition in Wipe section 
i tried mounting 'System' partition with command you shared above...
Then, 'System' partition was mounted Successfully.
it would be better if you could List All Partitions in Wipe section
#
Not able to Format Data ( from Wipe section )
After mounting Data partition from Mount section in TWRP Recovery,
i got error
View attachment 5485819
#
Not able to flash ZIP
When i tried to flash
orange_state_disabler_MTK Only.zip
i got error
View attachment 5485821
so Google introduces what is called dynamic partition in Android 10 and Dynamic Virtual A/B partition in Android 11.
check here: https://source.android.com/devices/tech/ota/dynamic_partitions/implement
and for answer for your question
#1
Its not a bug, because of dynamic partition changes from now on twrp can't wipe or flash system image directly.
#2
/data partition is automatically mounted from start so you don't need to mount it again unless you unmount it first
#3
I checked the file and it lack of A/B partition scheme detection for Android 11 MTK devices, so i make small changes on it, check the attached files.
2
And you also need new way for flashing GSIS in this devices.i am asking exactly same question to rama982 !
i need System patition option to flash GSi image.
i have flashed same GSi image in X650C ( infinix Hot 8 ) device Successfully using above same Steps ( i have mentioned above ).
P.S. i am moderately technical with android, apology in advance if mistake happen from my side.
in text
GSI Flashing Steps:
1. Download the GSI file, choose the ARM64 AB
2. Extract the GSI if it is still in rar/zip form
3. Move the GSI rom file (in the form of a .img file) into the platform tools
4. Open cmd in platform tools
5. Connect the device to your PC/laptop
6. Then boot the device into the bootloader by pressing the power and volume down buttons simultaneously or by using the command
adb reboot bootloader
7. After that check whether the device is connected to the pc/laptop by using the command
fastboot devices
8. Once detected, enter the command
fastboot reboot fastboot
to enter the fastbootd menu to flash the GSI rom
9. Enter the command
fastboot erase system
to wipe the system partition
fastboot delete-logical-partition system_ext
to increase system space
10. Flash the GSI rom by entering the command
fastboot flash system (filename of GSI rom).img
11. After flashing, reboot the device to the bootloader menu by giving the command
fastboot reboot bootloader
12. Clean user data by using the command
fastboot -w
13. Flash vbmeta using the command
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
14. Finally boot into the system
fastboot reboot
and the GSI rom is already installed on your device.
