[Info] [XOOM 2] MZ615 & MZ616 Pastuer Honeycomb fastboot xml availability

kent_lkc

Senior Member
Dec 2, 2007
208
125
0
www.mod2xtreme.com
General information for Motorola XOOM 2 owners. The availability of Honeycomb fastboot xml. See table below. :)

XOOM 2 MZ615 WiFi & MZ616 UMTS 16GB 32GB
It will take little while for me to upload due to slow internet connection.​


Don't ask me for download link as it is prohibited as mentioned by Moderator.
Google is your friend :D
 

Attachments

kent_lkc

Senior Member
Dec 2, 2007
208
125
0
www.mod2xtreme.com
update

file upload updates:-
1. MZ615 US Retail 3.2.2 Honeycomb fastboot - uploaded
2. MZ615 France Retail 3.2.2 Honeycomb's system_signed - uploaded

Also added fastboot for system version Blur_Version.0.281.8.MZ616.Retail.en.EU for the following countries
Retail Balkans
Retail CEE
Retail DACH
O2 Germany
 
Last edited:

Cosmox_

Senior Member
Aug 31, 2012
196
184
0
Hi
thanks for sharing
What can we do with these fastboot files? Flash a recovery for exemple?
Or may be update to ICS !!

Sent from my MB860 using xda app-developers app
 

Fieser-Kardinal

Senior Member
Nov 29, 2010
168
17
0
I've downloaded MZ615_1.6.0_278_1FF.xml Firmware. How do i flash this now on my MZ615? I tried via Fastboot to flash file after file it but i get a Preflash Validation Failure. :( So what to do now?

Now it wont boot, only Bootloader.
 

hongnguyenpro

Member
Aug 21, 2012
11
0
21
Turn off phone, then hold volume down + power on. Phone will enter fastboot mode, connect phone to pc. Extract the fastboot zip into folder then run rsd lite and open the .xml file then hit start button. After flashing completed, phone will fully reboot.

Caution: Backup everything in phone memory because the flashing process will erase everything
 

Fieser-Kardinal

Senior Member
Nov 29, 2010
168
17
0
Turn off phone, then hold volume down + power on. Phone will enter fastboot mode, connect phone to pc. Extract the fastboot zip into folder then run rsd lite and open the .xml file then hit start button. After flashing completed, phone will fully reboot.

Caution: Backup everything in phone memory because the flashing process will erase everything
Same with RSD Lite, motoboot.img sucessfully flashed, 1st reboot, boot.img fails with Preflash Validation Failure.
 

Da_nao_yan

Member
Nov 7, 2007
25
5
0
hi, do you have xoom 2 me 3g rom zip, mz608, 268.1 version?
I have rooted my device and change too much, need official rom to restore...
thank you very much!
 

Fieser-Kardinal

Senior Member
Nov 29, 2010
168
17
0
Anybody already downloaded 1.6.0M-281.8-PASTEM_UCATBLT1UMRTCOREEU fastboot File? I tried two times and once the download failed, the other time the zip file was corrupt :( Anybody with a mirror link as i'm not able to download anymore for today.
 

Cosmox_

Senior Member
Aug 31, 2012
196
184
0
Hi Kent,
this could be a noob question, but i have downloaded the french firmware for the mz615 tablet. The ZIP file contains a file named system_signed with no extension. I try to flash it using RSD lite 5.7 by adding XML or SBF extension but i have a "wrong image file" message un RSD. The firmware i downloaded ils the one for my tablet (same name...) so do you see what can be the problem here ?

Thanks

Sent from my MB860 using xda app-developers app