• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Infocus m810/m812 custom recovery, unlock, roms (only m810), tweaks.

Search This thread

heineken78

Senior Member
Mar 3, 2009
2,556
1,788
Kiev
www.mediafire.com
Infocus M810/T/U thread. (Also wth interesting things for m812 holders.)


Infocus m810 thread on facebook

Note:
All roms on this page are remade to use with Infocus m810 so don't flash on m812. MULTILANGUAGE

Bootloader unlock (m812/m812):
Custom recovery (m810/m812):


SUT flashable images (SUT Factory tool 3.0.8):
SUT 3.1.4 cracked.
Video tutorial SUT flashing on Android 6




ROMS M812(A/I) VN2/PHX:
Android 5.0.2 m812 OFFICAL sut. (Suitable for m810 too) to be used with SUT
cm13 for m812(a) http://forum.xda-developers.com/showpost.php?p=68355126&postcount=1110


ROMS M810(T/I/U):VNA
25/07/16 CM13 beta 2 (release) http://forum.xda-developers.com/showpost.php?p=67901403&postcount=1074
20/03/16 Android 6 custom ROM (ported from m812 ver 617A firmware)
23/02/16 Android 6 custom ROM (ported from m812 ver 6130 firmware)
27/12/15 Android 5.1.1 (internal version 511C(D updated)) (port from m812 ver 511C firmware)

Official Android Kitkat 4.4.2 (VNA-1640-0-00WW-A02)


Older roms


Older ROMs are designed for recovery installation and need some knowledge:

Before the installing of thiose ROMs you must be common with Adb/fastboot driver and installation. working fastboot.exe and adb.exe here
Im the author of this work. So feel free to ask and report.
All you install from here is on your responsibility.


m810.ROM Android 5.0.2: (October 2015) MULTILANGUAGE.


This ROM is full upgrade, so its able to install over Android 4.4.2 ROMS.
How tot install: Russian installation site
1. Put the zip file to sdcard.
2. Connect phone by USB cable. Press and hold volume down+power buttons
(10s), when phone restarts, release power button after vibrating and keep
holding volume down button until FASTBOOT message appear on screen.
3. Download boot recovery https://yadi.sk/d/v_LrtBVdk8pAj and place in fastboot/adb
folder
4. Run in cmd: fastboot boot tw101_recovery_repack_by_titovich.img
5. When recovery booted, Choose firmware UPDATE502_M810_v1.zip and
install.

In the end you should get this error: apply parsed perms lsetfilecon from
/cache to u_object_r:cache_file:s0 failed operation not supported on transport
endpoint set_metadta: some changes failed.
Ignore it. Its issue of recovery.

6 Besides, ROOT and Xposed for 5.0.X framework preinstall can be copied to
sdacard and installed same time after rom installed from boot recovery.
7. Hold power button 10 sec and reboot.

Enjoy.


5.0.2 DOWNLOAD




m810.ROM Android 5.1.1A 08/10/15 The beta version of Lollipop
5.1.1A
ROM from official 511A m812.

Same install instructions as above

Main changes
-Wifi reception better;
-GPS;
-Added buttons config, e-compass, g-sensor calibrations to display menu .



5.1.1 DOWNLOAD.

XPOSED for 5.1.1 . ROOT


Note Xposed from version 5.0 and 5.1 are different!


To flash via SUT:
ODEXED ROM Android 5.1.1B 11/15 The beta version of Lollipop
5.1.1B from official m812 511B update ROM. |For SUT installer. With
unbricking feature.

- ROM designed for odexed files so it contains resized partition for system
(by titovich). means one you install the partition table will remain - 2.5gb for
system. original system parttion is less 2gb. You will be able to install all
m810 roms but I noticed you.
-not for XPLOSED framework. The ROM is full odexed. So don't try Xposed it
will fail;
-minor changes from my side diff to previous ROM;
-fixes from Infocus to battery life.

bugs: haptics not working for hard buttons (to be fixed)

To be installed via SUT utility SUT 3.0.8: DOWNLOAD

-install SUT (drivers will be installed with SUT);
-download zip with nb0 image. Unzip.
-open nb0 image file in SUT.
-Check "Normal Download" and "Erase data".
-Download ignore warning messages.
-Flash will complete in less than 1 min.

5.1.1B for SUT DOWNLOAD LINK2



EOL
 
Last edited:

heineken78

Senior Member
Mar 3, 2009
2,556
1,788
Kiev
www.mediafire.com
Tweaks and enchantments :

M810 service manual
http://forum.xda-developers.com/showpost.php?p=68520451&postcount=1123

Edit boot logo m81X


Other party hears the noise durine the phone call

build.prop file
persist.audio.fluence.voicecall=false


Secret codes:

*#*#4636#*#*, *#*#653837#*#*, *#*#76278#*#* Settings.
Note, never tap "USA Band", otherwise you will need to reflash modem part or firmware to make phone back to work.
*#*#873#*#* Upload service
*#*#225#*#* Calendar
*#*#2324636#*#* , *#*#232#*#*, *#*#23273#*#* ,*#*#233#*#*, *#*#231#*#*, *#*#2324678#*#* CDA
*#*#278#*#* CPUDaemon
*#*#324#*#* DebugCfg
*#*#368#*#* Device manager
*#*#3721#*#*, *#*#6721#*#*, *#*#372#*#*, *#*#672#*#*, *#*#4867#*#* High Temperature Monitor
*#*#744#*#*, *#*#628#*#* Mobile Assistant
*#*#787#*#* PackageUsageTool
*#*#227#*#* Pandora Box
*#*#272#*#* Permission Control
*#*#33546#*#* Permission Detection
*#*#793#*#*, *#*#795795#*#* Power Detective
*#*#795#*#* power Monitor
*#*#277#*#*, *#*#3277#*#* Stability Monitor
*#*#28274663#*#* TeleService

Themes pack for 511B/C:


Disable buttons backlight. (pale blue led shine instead). ROOT needed.

Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.

Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too

Noise fix. When party on other side is claiming on noise above your voice.
This is typical issue of dual mic QUALCOMM devices on 5+ Androids. Edit built.prop

persist.audio.fluence.voicecall=true change to false


Enable DIAG port for QXDM (QPST). Rooted.

adb shell
su
setprop persist.sys.usb.config diag,serial,mass_storage,adb


Increase speaker volume

Sound volume mod working on m810


IMEI, Serial number, MEID, MAC, BT changer. Service tool (m810/m812) DANGEROUS!!!
https://drive.google.com/open?id=0B3Wy4Ok3qGszcmZlMDFCbGdwUjQ
 

Attachments

  • lights.msm8974.rar
    3.7 KB · Views: 1,092
Last edited:

sknipas

Member
Oct 19, 2015
12
7
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?

Thanks.
 

lolo9393

Senior Member
Dec 28, 2011
1,025
274
Chau Doc Vietnam
@ heineken78
Thanks for coming here at XDA
I am daily following your good works at 4PDA and I am actually with Titovich's 5.02 rooted and i feel more than satisfied.
I take the opportunity to send you my grateful Thanks.
I will install the new update and let comment as well. I hope and wish the system repartitioning will not give any issue ( I don't like playing with root partition!!).
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
 
Last edited:
  • Like
Reactions: [email protected]

heineken78

Senior Member
Mar 3, 2009
2,556
1,788
Kiev
www.mediafire.com
@ heineken78
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
Stock reserved place in m810 for system partition is ~1,6 gb. Making firmware less, won't bring any changes, unless repartitioning it to lets say 1,1 gb. This operation needs lot of system knowledge from people who will install it.. And profit of changes will be only 500 mb? is nothing.
m812 has partition of 3 gb, that's huge, but suitable for oxdexed roms.
repartition means- you need to change start sectors of emmc in order to set sizes of system, cache. Everything before those partitions remain the same.
 
Last edited:
  • Like
Reactions: gsmyth and lolo9393

lolo9393

Senior Member
Dec 28, 2011
1,025
274
Chau Doc Vietnam
@ heineken78
I've just finished the new Rom install. I followed instructions and had no issue . Rebooted via recovery and installed my stuffs.
-Wifi reception is the same as before and always weaker than my other phones. (minus 8 db)
-GPS IS NOT GETTING ANY FIX. 25 SAT in view and no one fixed.
-New Rom is a HUGE bit of improvement and feel more pleasant and very fast.
-DISPLAY is vibrant and very well set. Automatic mode is perfect also at night reading. good
- Battery leak in stand by is impressively low. less 1% full night. very good
THANKS TO THE TEAM BUILDING FOR THIS REALIZATION.

Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...

---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------

Hi Guys!

I would like to ask that ROM by titovich, which languages contains?

Thanks
Indonesian/Deutch/ENGLISH/Espanol/Filipino/FRENCH/Portugues/VIET/Russian/chinese/ and 2 symbolic i can't know ....sorry may be Hebreu,
 

heineken78

Senior Member
Mar 3, 2009
2,556
1,788
Kiev
www.mediafire.com
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...

---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------

Yes Im trying that.
But for now, "adb reboot ftm" to reboot in ftm mode and enable qualcomm diag driver.
Then change nv's as written here and here. Uz mztool to calculate right entry's.
 
  • Like
Reactions: lolo9393

[email protected]

Senior Member
Oct 11, 2015
67
29
@heineken78
Thanks dude!
Its an official or unofficial translated ROM?
Im just ask the reason of hope, maybe put into some more languages too.
Im get this phone yesterday, it looks really great, but enter the recovery and fastboot mode its terrible.
Do you know TWRP or CWM recovery for this phone?
 

a1dahiya

Member
Nov 3, 2015
36
3
ilhi, i tried to disable backlight with .rar file you attached and it does work but i

TWEAKS:
1. Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.

Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too

ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
 

a1dahiya

Member
Nov 3, 2015
36
3
what should i do please help me

Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.

What should I do, please help me out

---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------

What should I do, please help me out

What drivers to change or any other change of value .....?
I'm on stock lollipop 5.0.2 rooted
I also tried to replace the patched file with original which I copied before replacing but nothing helped
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 21
    Infocus M810/T/U thread. (Also wth interesting things for m812 holders.)


    Infocus m810 thread on facebook

    Note:
    All roms on this page are remade to use with Infocus m810 so don't flash on m812. MULTILANGUAGE

    Bootloader unlock (m812/m812):
    Custom recovery (m810/m812):


    SUT flashable images (SUT Factory tool 3.0.8):
    SUT 3.1.4 cracked.
    Video tutorial SUT flashing on Android 6




    ROMS M812(A/I) VN2/PHX:
    Android 5.0.2 m812 OFFICAL sut. (Suitable for m810 too) to be used with SUT
    cm13 for m812(a) http://forum.xda-developers.com/showpost.php?p=68355126&postcount=1110


    ROMS M810(T/I/U):VNA
    25/07/16 CM13 beta 2 (release) http://forum.xda-developers.com/showpost.php?p=67901403&postcount=1074
    20/03/16 Android 6 custom ROM (ported from m812 ver 617A firmware)
    23/02/16 Android 6 custom ROM (ported from m812 ver 6130 firmware)
    27/12/15 Android 5.1.1 (internal version 511C(D updated)) (port from m812 ver 511C firmware)

    Official Android Kitkat 4.4.2 (VNA-1640-0-00WW-A02)


    Older roms


    Older ROMs are designed for recovery installation and need some knowledge:

    Before the installing of thiose ROMs you must be common with Adb/fastboot driver and installation. working fastboot.exe and adb.exe here
    Im the author of this work. So feel free to ask and report.
    All you install from here is on your responsibility.


    m810.ROM Android 5.0.2: (October 2015) MULTILANGUAGE.


    This ROM is full upgrade, so its able to install over Android 4.4.2 ROMS.
    How tot install: Russian installation site
    1. Put the zip file to sdcard.
    2. Connect phone by USB cable. Press and hold volume down+power buttons
    (10s), when phone restarts, release power button after vibrating and keep
    holding volume down button until FASTBOOT message appear on screen.
    3. Download boot recovery https://yadi.sk/d/v_LrtBVdk8pAj and place in fastboot/adb
    folder
    4. Run in cmd: fastboot boot tw101_recovery_repack_by_titovich.img
    5. When recovery booted, Choose firmware UPDATE502_M810_v1.zip and
    install.

    In the end you should get this error: apply parsed perms lsetfilecon from
    /cache to u_object_r:cache_file:s0 failed operation not supported on transport
    endpoint set_metadta: some changes failed.
    Ignore it. Its issue of recovery.

    6 Besides, ROOT and Xposed for 5.0.X framework preinstall can be copied to
    sdacard and installed same time after rom installed from boot recovery.
    7. Hold power button 10 sec and reboot.

    Enjoy.


    5.0.2 DOWNLOAD




    m810.ROM Android 5.1.1A 08/10/15 The beta version of Lollipop
    5.1.1A
    ROM from official 511A m812.

    Same install instructions as above

    Main changes
    -Wifi reception better;
    -GPS;
    -Added buttons config, e-compass, g-sensor calibrations to display menu .



    5.1.1 DOWNLOAD.

    XPOSED for 5.1.1 . ROOT


    Note Xposed from version 5.0 and 5.1 are different!


    To flash via SUT:
    ODEXED ROM Android 5.1.1B 11/15 The beta version of Lollipop
    5.1.1B from official m812 511B update ROM. |For SUT installer. With
    unbricking feature.

    - ROM designed for odexed files so it contains resized partition for system
    (by titovich). means one you install the partition table will remain - 2.5gb for
    system. original system parttion is less 2gb. You will be able to install all
    m810 roms but I noticed you.
    -not for XPLOSED framework. The ROM is full odexed. So don't try Xposed it
    will fail;
    -minor changes from my side diff to previous ROM;
    -fixes from Infocus to battery life.

    bugs: haptics not working for hard buttons (to be fixed)

    To be installed via SUT utility SUT 3.0.8: DOWNLOAD

    -install SUT (drivers will be installed with SUT);
    -download zip with nb0 image. Unzip.
    -open nb0 image file in SUT.
    -Check "Normal Download" and "Erase data".
    -Download ignore warning messages.
    -Flash will complete in less than 1 min.

    5.1.1B for SUT DOWNLOAD LINK2



    EOL
    16
    Marshmallow 6 ver.2 (6130) for m810

    23/02/16
    Marshmallow 6 update for m810 (ported from m812 update 6130) deodexed, Multilanguage.
    Based on default m810 partition and has 10,5 gb free space after fresh install.

    Flashing video tutorial by Vipul

    Description:

    Issues:
    -No NFC (issue. m810 NFC hardware application is not in system) ;
    -No SDCARD apk installation (security policy by Infocus);

    Improvements:
    -languages added. Supported: EN/DE/ES/CZ/RU/UA/BG/TR/VT/SUO/SL/PT/PL/NL/HU/LT/LV/IT/FR/FILL/INDONESIA/CN/TW/
    -button backlight is switched off when brightness is set to manual, also is automatically of in dimming (services.jar);
    -haptics feedback is working, also volume buttons causing vibration in standby removed (services.jar);
    -removed apk certification check (services.jar);
    -retuned autobacklight the way of m812 (framework-res.apk);
    -fixed battery value and power consumption data (framework-res.apk)
    -new sound db files for m810 found in m812 rom. Better sound and volumes for everything;
    -CPU governor is set to interactive and tuned for optimal performance. (you can control CPU settings in Kernel Adiutor);
    If you dont like current cpu tweaks (may seen to you too hungry for battery or too hot for temp)look for Donwload link for CPU fix
    -Thermal engine tuned (can be disabled in Kernel Adiutor);
    -Other system files tweaks and fixes,

    Software:
    -Removed unnecessary google software, that can be downloaded from market;
    -Audio Effects are back;
    -VIPER FX sound;
    -MX Player 1.8.3 for mm6 (for all video and HW enhancements supported);
    -Sony TrackID mm6;
    -Sony Keyboard 7.0 for mm6;
    -Greenify;
    -Kernel Adiutor;
    -Root Explorer 3.3.8;
    How to use built in screensaver during usb is connected: Display settings > Daydream (stand by) > When to dream option > tap on "While charging"

    Installation:
    (from readme.txt)
    Tools: factory flash tool SUT 3.0.8 (download)
    Notes: Rom isnt working without rooting, your phone will be automatically bootloader unlocked. if you want to lock it back for later look at "Unlock bootloader" section at first page.

    0. Copy SuperSU-v2.67.zip to sdcard.
    1. Flash image VNA-6130-0-00WW-NOROOT.nb0 via SUT factory tool,
    2. Options in SUT for flashing: Normal download, Erase user data, erase error data, Switch SKUID
    3. When flashing starts you will prompted for SKUID choise:
    "100A0" for WW : EN/DE/ES/CEZ/RU/UA/BG/TR/VIET/SUO/SLO/PT/PL/NL/HU/LT/LAIT/FR/FILL/INDONESIA/CN/TW/
    "100IN" for India :EN/HI/RU
    4. After download is finished, phone will be restarted to custom recovery (bootloader will be automatically unlocked)
    5. In custom recovery go:
    Wipe > Format data > Type "yes".
    Return back to Install option in recovery, install Super SU 2.67 SuperSU-v2.67.zip. (you have to install Super SU otherwise rom will not work)
    Now go Reboot > System
    6. Phone will restart several times, be patient for 10 min and wait for first boot.
    7. In Android accept all permissions popped up.


    Because SUPERSu is systemless, each time when you will make hardreset (clear data), you have to return to step 5 and install Supersu root via recovery (how to get into recovery manually you can read here).

    Download link: gdrive (compressed by 7zip) (incl. SuperSU 2.67, xposed-v80-sdk23-arm.zip, XposedInstaller_3.0_alpha4.apk)
    Download patch: (default CPU governor if needed)

    Extra
    Xposed framework supported:
    - xposed-v80-sdk23-arm.zip to be installed from custom recovery (in download archive above)
    - XposedInstaller_3.0_alpha4.apk to be installed in Android when zip is installed. (in download archive above)
    15
    20/03/16
    Marshmallow 6 update 3 for m810i/t (ported from m812 update 617A) deodexed, Multilanguage.
    including latest fixes
    Based on default m810 partition and has 10,5 gb free space after fresh install.

    Flashing video tutorial by Vipul for previous version.

    Description:

    Issues:
    -Custom recovery doesn't work when SD card formatted as internal storage is inside the phone;

    Changes to previous version:
    -Android update 617A;
    -Sdcard support as internal storage;
    -NFC fix;
    -Sound fixes;(incoming call volume, sound library's from Meizu Pro 5)
    -Home button double tap fix;
    -Sensor fixes;
    -Permission fixes;
    -On demand governor tuned;
    -SU Root is not required.


    Installation:

    Tools: factory flash tool SUT 3.0.8 (download)
    Notes: Your phone will be automatically bootloader unlocked. if you want to lock it back for later look at "Unlock bootloader" section at first page.


    1. Flash image VNA-617A-0-00WW-NOROOT.nb0 via SUT factory tool,
    2. Options in SUT for flashing:
    a) Updating from previous mm6 6130 without loosing any data: tick on "Normal download" only
    b) Fresh update with erasing of data (recommended)" Tick on "Normal download", "Erase user data", "erase error data", "Switch SKUID".
    3. (Only for b) case) When flashing starts you will prompted for SKUID choise:
    "100A0" for WW : EN/DE/ES/CEZ/RU/UA/BG/TR/VIET/SUO/SLO/PT/PL/NL/HU/LT/LAIT/FR/FILL/INDONESIA/CN/TW/
    "100IN" for India :EN/HI/RU
    100AO and 100IN using different theme, bootlogo and icons, also some operator setting. You may try both.

    4. After download is finished, phone will be restarted to custom recovery (bootloader will be automatically unlocked)
    5. In custom recovery go:
    a) If you made fresh install and don't want to root or updated from previous mm 6130 version.
    Install fix2.zip and press "Reboot to System"
    b) If you made a fresh install and want to root system. Press Wipe > Format data > Type "yes".
    Return back to Install option in recovery, install Super SU 2.68 zip. (included in firmware file)
    Install fix2.zip
    Now go Reboot > System

    6. Be patient for 10 min and wait for first boot.
    7. In Android accept all permissions popped up.


    (how to get into recovery manually you can read here).

    Download link: gdrive (compressed by 7zip) (incl. SuperSU 2.68, xposed-v80-sdk23-arm.zip, XposedInstaller_3.0_alpha4.apk, Rootexplorer.apk)

    Hot fixes (to apply via recovery) FIXES!!!

    Extra
    Xposed framework supported:
    - xposed-v80-sdk23-arm.zip to be installed from custom recovery (in download archive above)
    - XposedInstaller_3.0_alpha4.apk to be installed in Android when zip is installed. (in download archive above)
    10
    Tweaks and enchantments :

    M810 service manual
    http://forum.xda-developers.com/showpost.php?p=68520451&postcount=1123

    Edit boot logo m81X


    Other party hears the noise durine the phone call

    build.prop file
    persist.audio.fluence.voicecall=false


    Secret codes:

    *#*#4636#*#*, *#*#653837#*#*, *#*#76278#*#* Settings.
    Note, never tap "USA Band", otherwise you will need to reflash modem part or firmware to make phone back to work.
    *#*#873#*#* Upload service
    *#*#225#*#* Calendar
    *#*#2324636#*#* , *#*#232#*#*, *#*#23273#*#* ,*#*#233#*#*, *#*#231#*#*, *#*#2324678#*#* CDA
    *#*#278#*#* CPUDaemon
    *#*#324#*#* DebugCfg
    *#*#368#*#* Device manager
    *#*#3721#*#*, *#*#6721#*#*, *#*#372#*#*, *#*#672#*#*, *#*#4867#*#* High Temperature Monitor
    *#*#744#*#*, *#*#628#*#* Mobile Assistant
    *#*#787#*#* PackageUsageTool
    *#*#227#*#* Pandora Box
    *#*#272#*#* Permission Control
    *#*#33546#*#* Permission Detection
    *#*#793#*#*, *#*#795795#*#* Power Detective
    *#*#795#*#* power Monitor
    *#*#277#*#*, *#*#3277#*#* Stability Monitor
    *#*#28274663#*#* TeleService

    Themes pack for 511B/C:


    Disable buttons backlight. (pale blue led shine instead). ROOT needed.

    Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
    Don't forget to backup the original file.

    Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
    There is no any other control to disable or enable it.
    XPOSED framework can't do anything too

    Noise fix. When party on other side is claiming on noise above your voice.
    This is typical issue of dual mic QUALCOMM devices on 5+ Androids. Edit built.prop

    persist.audio.fluence.voicecall=true change to false


    Enable DIAG port for QXDM (QPST). Rooted.

    adb shell
    su
    setprop persist.sys.usb.config diag,serial,mass_storage,adb


    Increase speaker volume

    Sound volume mod working on m810


    IMEI, Serial number, MEID, MAC, BT changer. Service tool (m810/m812) DANGEROUS!!!
    https://drive.google.com/open?id=0B3Wy4Ok3qGszcmZlMDFCbGdwUjQ
    9
    Lollipop 5.1.1C update.

    -deodexed stock room with root;
    -standart recovery;
    -standart partition table;
    -keyboard replaced by Xperia's;

    Diff's from 5.1.1B:
    -update 5.1.1C;
    -deodexed. can be xposed. check for zip at first page (ver22);
    -improvements of perfomace in games;
    -faster than 511B;
    -haptics fix;
    -unlocked vibration settings;
    -better proximity in phone calls.


    Everything else find yourself

    Note: the recovery will be replaced by the original one.

    Installation Lollipop 5.1.1C via SUT.
    User Erase data is necessary.
    STOP! Im not responsible for curve hands and damaged phones.
    DOWNLOAD @ GDRIVE

    Update!!! PATCH 511D


    TWM recovery with bootloader autounlock for SUT now:
    Note: flashing of custom recovery will cause erasing of userdata.
    DOWNLOAD @ GDRIVE