How To Guide Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

Search This thread

mightnare

Member
Jan 25, 2012
19
8
Samsung Galaxy M31
Lenovo P11
  • Like
Reactions: empty.cad

Carmanhan

New member
Jul 23, 2022
1
0
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

!!! ATTENTION !!!
WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).

I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.

The following requirements must be met:

* Unlocked Bootloader;
* Device with charged battery;
* USB cable working and of good quality (preferably the original cable of the device);
* Remove all devices connected to the computer's USB port to avoid failures;
* Download "Original ROM":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
https://qpsttool.com/qpst-tool-v2-7-496
* Download "Platform Tools SDK" (Command Line Tool):
https://developer.android.com/studio/releases/platform-tools
* Package without "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file

Installation:

1. Extract the "Original ROM"

* Create a folder on the desktop called "ROM"
* Extract the "Original ROM" inside the "ROM" folder created;

2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
* Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
* Install "QPST Tool.exe";
* Enter the "Driver" folder and install Qualcomm USB Drivers.

3. Enable Tablet USB Debugging "USB Debugging":
* Open the device's "Settings" settings;
* Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
* Go back to Settings "Settings" and go to General Settings "General Settings";
* Select the Developer Settings "Developer Options";
* Check the USB Debugging box "USB Debugging";

4. Start the Tablet in EDL Mode (Emergency Download Mode):

In EDL Mode the device screen remains off!
There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")


Mode1 (For Tablet powered off or unable to start)
* Turn off the Tablet;
* Press and hold the Volume Up (+) button;
* Connect USB cable to Tablet and computer.

Mode2 (By Command Line using "Platform Tools SDK")
* Turn on and start the Tablet;
* Connect USB cable to Tablet and computer.
* Extract the "Platform Tools SDK" on the desktop;
* Open the computer's CMD and navigate to the extracted folder (platform-tools);
* Use the adb command "adb reboot edl";
* Wait for the device to restart in EDL mode.

5. This should now appear in the Windows device manager:

View attachment 5618425

6. Configuration of the "QPST Tool (QFIL)":
* Start QFIL;
* The device port must be automatically recognized by QFIL (make sure the port is correct);
* Make the settings shown in the screenshot;
“Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;

View attachment 5618427

* In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
* In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file

View attachment 5618429

* Now click on Download Content "Download Content" and wait;
* The process takes about 2-5 minutes and your tablet will restart with "Original ROM".

View attachment 5618431

7. Blocking the "Bootloader" (OPTIONAL)

Bootloader blocking is optional!
After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!


The following requirements must be met:


* Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
* Download and install Lenovo USB drivers (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this tool (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Start your tablet normally on Android and connect to PC by USB cable;
* Extract the "LockUnlockBootloader.zip" file on the desktop;
* Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
* On the CMD screen, press “Enter” and then “1” and confirm again.

View attachment 5618433

* On your Tablet will ask if you want to lock the bootloader;
* Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.

View attachment 5618435

Okay, your bootloader is now locked.

7.2 Bootloader Locking Problems

Only for those who are getting "Your device is corrupted" message.


To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
Follow the tutorial again with the "Original ROM" and follow these steps:

The process for updating manually is the following:
All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"


1) Download the update;

2) Use a file explorer and move it to the root folder of your device;

3) Rename it to "update.zip"

4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'

Repeat these steps for each individual update

The order of updates are:
1) Stock ROM version (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device

Once you have done that you will have the Bootloader locked.

*Note this procedure works as of 25/5/22, it may change if there's a new update.

Credits to our friend "Rail-"

8. Unlock the "Bootloader" (OPTIONAL)

Bootloader unlocking is optional!
Only unlock if you intend to install "Custom ROM" or "ROOT" the device.

Before downgrading, make sure your current ROM is compatible!

The following requirements must be met:

* Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
* Download and install Lenovo "LenovoUsbDriver" USB drivers:
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this "LockUnlockBootloader" tool:
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
https://www.zui.com/iunlock

View attachment 5618437

It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";


8.1

* Now you place the file directly in the “LockUnlockBootloader” program folder;
* Start the process with the batch file “UnlockBootloader.bat”;

View attachment 5618439

* Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).

View attachment 5618441

Source and Links used for this guide.





THANK YOU SO MUCH TO THE COLLABORATORS!


******************************************************************************************
******************************************************************************************
View attachment 5618337 VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)View attachment 5618339
******************************************************************************************
******************************************************************************************

Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)

!!! ATENÇÂO!!!
COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.


Os seguintes requisitos devem ser atendidos:

* Bootloader Desbloqueado;
* Aparelho com bateria carregada;
* Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
* Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
* Baixe "ROM Original":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
https://qpsttool.com/qpst-tool-v2-7-496
* Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
https://developer.android.com/studio/releases/platform-tools
* Pacote sem "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file

Instalação:

1. Extraia a "ROM Original"
* Crie uma pasta na área de trabalho chamada "ROM"
* Extraia a "ROM Original" dentro da pasta "ROM" criada;

2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
* Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
* Instale o "QPST Tool.exe";
* Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.

3. Ative a Depuração USB "USB Debugging" do Tablet:
* Abra as configurações "Settings" do aparelho;
* Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
* Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
* Selecione a Cofiguração de Desenvolvedor "Developer Options";
* Marque a caixa de Depuração USB "USB Debugging";

4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):

No Modo EDL a tela do aparelho permanece desligada!
Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")

Modo1 (Para Tablet desligado ou que não puder ser iniciado)
* Desligue o Tablet;
* Pressione e segure o botão Volume Cima (+);
* Conecte o cabo USB no Tablet e no computador.

Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
* Ligue e inicie o Tablet;
* Conecte o cabo USB no Tablet e no computador.
* Extraia o "SDK Plataform Tools" na área de trabalho;
* Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
* Use o comando adb "adb reboot edl";
* Espere o aparelho reiniciar no modo EDL.

5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:

View attachment 5615929

6. Configuração do "QPST Tool (QFIL)":
* Inicie o QFIL;
* A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
* Faça as configurações mostradas na captura de tela;
“Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;

View attachment 5615931

* Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
* Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"

View attachment 5615933

* Agora clique em Baixar Conteúdo "Download Content" e aguarde;
* O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".

View attachment 5615935

7. Bloqueio do "Bootloader" (OPCIONAL)

O bloqueio do Bootloader é opcional!
Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
* Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
* Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
* Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.

View attachment 5615937

* No seu Tablet vai perguntar se você deseja bloquear o bootloader;
* Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.

View attachment 5615941

Pronto, seu bootloader já está bloqueado.

7.2 Problemas de bloqueio do "BootLoader"

Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"


Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
Siga o tutorial novamente com a "ROM Original" e siga estes passos:

O processo de atualização manual é o seguinte:
Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"

1) Baixe a atualização;

2) Use um explorador de arquivos e mova-o para a pasta raiz do seu aparelho;

3) Renomeie para "update.zip"

4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"

Repita essas etapas para cada atualização individual

A ordem das atualizações é:

1) ROM Original versão (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"

Feito isso, você terá o Bootloader bloqueado.

*Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.

Créditos ao nosso amigo "Rail-"

8. Desbloquear o "Bootloader" (OPCIONAL)

O desbloqueio do Bootloader é opcional!
Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta "LockUnlockBootloader":
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
https://www.zui.com/iunlock

View attachment 5618321

É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";


8.1

* Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
* Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;

View attachment 5618323

* Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).

View attachment 5618325


Fonte e Links utilizados para esse guia.





MUITO OBRIGADO AOS COLABORADORES!
Can someone help me? I ****ed up and got the message "Your device is corrupt." But the service to recover the file directly on the Lenovo website is in maintenance and it says to send an email if I wanted to, but I don't know how I should send this email (if it's in English or Chinese, etc.)
1658593165969.png
 

Radicfazed

New member
Aug 2, 2022
1
0
Last edited:

LKMT

New member
Aug 21, 2022
3
1
hello, when should i lock my bootloader? first I apply the stock rom and then I can perform the blocking procedure? Or do I do something first?
 

rb25zed

Member
Feb 6, 2015
6
3
Hey guys I am one of the ones with the device is corrupt issue. But I foolishly did not get a sn.img and now I cannot get my IMEI. I only just got the tablet and it running for only a little while before I attempted this. Now all it does is boot into fastboot and the bootloader is locked. Is there any way for me to recover from this? :( I don't think I enabled OEM unlocking in developer options as well.
 
Last edited:
  • Like
Reactions: juliorcp

juliorcp

Member
Aug 25, 2022
8
7
Guys,

I bought the tablet with a global ROM and I tried to restore to the original ROM. I could restore but then I tried to lock the bootloader (to receive OTA updates) and I'm stuck at the fastboot mode.

I tried to reflash the original ROM but when the tablet is rebooted after the reflashing it came back to the fastboot mode and it is in a loop.

I'm desperate because it seems a bricked tablet.

Can you help me?

Thank you!
 
  • Like
Reactions: Neter_ and rb25zed

rb25zed

Member
Feb 6, 2015
6
3
Guys,

I bought the tablet with a global ROM and I tried to restore to the original ROM. I could restore but then I tried to lock the bootloader (to receive OTA updates) and I'm stuck at the fastboot mode.

I tried to reflash the original ROM but when the tablet is rebooted after the reflashing it came back to the fastboot mode and it is in a loop.

I'm desperate because it seems a bricked tablet.

Can you help me?

Thank you!
If you enabled OEM unlock in the developer settings before doing this you might be able to use fastboot to unlock the bootloader and that might let you get back into Android so you can do the OTA updates.

Check out this post:
 

juliorcp

Member
Aug 25, 2022
8
7
If you enabled OEM unlock in the developer settings before doing this you might be able to use fastboot to unlock the bootloader and that might let you get back into Android so you can do the OTA updates.

Check out this post:
And that is the problem, my friend. I didn't enable the OEM unlock and I can't boot the device into normal mode (it is in a fastboot mode loop). It is stuck. Is there another way to enable the OEM unlock? By the way, do I need the unlock image? I've already asked to Lenovo, but they haven't replied so far.
 

SalJR

Member
Oct 23, 2010
35
5
Piracicaba
Heys friend, a question (probably a noob one)... I bought my P11 with global rom... what would change if I install the original/CN rom? Does it have a better looking/interface? More apps? Is it more safe than the global rom?
 
Last edited:

Neter_

New member
Sep 5, 2022
3
0
Tipo,

Compré la tableta con una ROM global y traté de restaurar a la ROM original. Pude restaurar pero luego traté de bloquear el cargador de arranque (para recibir actualizaciones de OTA) y estoy atascado en el modo de arranque rápido.

Traté de actualizar la ROM original, pero cuando la tableta se reinicia después de la actualización, volvió al modo de inicio rápido y está en un bucle.

Estoy desesperado porque parece una tablet bricked.

¿Me puedes ayudar?

¡Gracias!
Hola pudiste solucionar el problema a mi me pasa lo mismo
 

Guanaboy

New member
Sep 7, 2022
2
1
Hello,

Does some one can tell me if official Chinese ROM has all the Google framework and works with google pay?

Second question, i have an alert message when i turn on my tablet with the global ROM. Does it means the bootloader is unlock or should i made something else?
 

David2342

Member
Nov 16, 2016
7
0
Hello friends, I have the 560 version, thanks for your help. Does anyone know how to root that version?
 

DanAcuna

Member
Jun 5, 2012
11
0
And that is the problem, my friend. I didn't enable the OEM unlock and I can't boot the device into normal mode (it is in a fastboot mode loop). It is stuck. Is there another way to enable the OEM unlock? By the way, do I need the unlock image? I've already asked to Lenovo, but they haven't replied so far.
did u maneged to get your tablet working? i'm in the same boat.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Hello! Has anyone ever encountered such a thing that after the bootloader was blocked, the message "Your device is corrupted" appeared, then what is in the picture, and if you click on the "Start" button, then the device reboots and this screen appears again? If so, please tell me how to fix it
    You need to follow the steps:

    1 - Unlock Bootloader again
    1.1. You need the sn.img file provided by Lenovo, but the website that provided this file is not working properly. Then you can try via the link (which is the easiest way, but it didn't work for me): http://cdn.zui.lenovomm.com/developer/tabletboot/ [your sn number]/sn.img
    or follow the steps of this other guide (it worked for me): https://forum.xda-developers.com/t/...t-proper-unlock-file-xiaoxin-pad-pro-2021-tb- j716f.4488343/#post-87420075
    1.2 After getting the sn.img file, just perform step 8 of this tutorial.
    2 - Now you install the original ROM
    3- Manually update until version 13.1.560
    4 - And now you can crash Bootloader again.

    Extra Tips: - Before starting the lockout procedure I made sure the Lenovo drivers were installed and uninstalled the Qualcomm Drivers. - After starting the lock procedure, when I got to the lock screen I removed the usb cable from the tablet and selected to lock it.
    2
    I was able to lock my bootloader using the 13.1.560
    it`s 22/11/2022 19:09
    Thank you all for your helps.
    1
    Em algum momento, lendo muito, descobri que espectro de 5ghz está reservado para a China. Não sei como isso afeta a conexão de banda de rede com o gerenciamento do dispositivo de localização e o dispositivo fora da China. 5ghz funcionam na versão 13.1.560. Aqui não há atualização OTA para fazer, e eu não vou mexer com o sistema de arquivos novamente. Apenas OTA
    Você atualizou o ZUI via atualização do sistema de arquivos ou OTA? Bloquear ou desbloquear o Bootloader?
    Em algum momento, lendo muito, descobri que espectro de 5ghz está reservado para a China. Não sei como isso afeta a conexão de banda de rede com o gerenciamento do dispositivo de localização e o dispositivo fora da China. 5ghz funcionam na versão 13.1.560. Aqui não há atualização OTA para fazer, e eu não vou mexer com o sistema de arquivos novamente. Apenas OTA
    Você atualizou o ZUI via atualização do sistema de arquivos ou OTA? Bloquear ou desbloquear o Bootloader?
    The zui 14 has two updates, the first I did manually and the second via ota. But to do this via ota you need to use Chinese VPN. But people who are on ZUI 13 can now upgrade to ZUI 14 with android 12 directly via ota with chinese VPN
    1
    still unlocked? If yes, install the stock rom +updates again and then lock .
    Confirmed activation tablet locking on version 13.1.560 and no OTA updates to do.
    Already relocked and upgraded to zui14
  • 10
    Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

    !!! ATTENTION !!!
    WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
    AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).

    I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.

    The following requirements must be met:

    * Unlocked Bootloader;
    * Device with charged battery;
    * USB cable working and of good quality (preferably the original cable of the device);
    * Remove all devices connected to the computer's USB port to avoid failures;
    * Download "Original ROM":
    https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
    * Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
    https://qpsttool.com/qpst-tool-v2-7-496
    * Download "Platform Tools SDK" (Command Line Tool):
    https://developer.android.com/studio/releases/platform-tools
    * Package without "ROM"
    https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file

    Installation:

    1. Extract the "Original ROM"

    * Create a folder on the desktop called "ROM"
    * Extract the "Original ROM" inside the "ROM" folder created;

    2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
    * Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
    * Install "QPST Tool.exe";
    * Enter the "Driver" folder and install Qualcomm USB Drivers.

    3. Enable Tablet USB Debugging "USB Debugging":
    * Open the device's "Settings" settings;
    * Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
    * Go back to Settings "Settings" and go to General Settings "General Settings";
    * Select the Developer Settings "Developer Options";
    * Check the USB Debugging box "USB Debugging";

    4. Start the Tablet in EDL Mode (Emergency Download Mode):

    In EDL Mode the device screen remains off!
    There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")


    Mode1 (For Tablet powered off or unable to start)
    * Turn off the Tablet;
    * Press and hold the Volume Up (+) button;
    * Connect USB cable to Tablet and computer.

    Mode2 (By Command Line using "Platform Tools SDK")
    * Turn on and start the Tablet;
    * Connect USB cable to Tablet and computer.
    * Extract the "Platform Tools SDK" on the desktop;
    * Open the computer's CMD and navigate to the extracted folder (platform-tools);
    * Use the adb command "adb reboot edl";
    * Wait for the device to restart in EDL mode.

    5. This should now appear in the Windows device manager:

    Foto01.png


    6. Configuration of the "QPST Tool (QFIL)":
    * Start QFIL;
    * The device port must be automatically recognized by QFIL (make sure the port is correct);
    * Make the settings shown in the screenshot;
    “Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;

    Foto2.png


    * In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
    Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
    * In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
    Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file

    Foto3.png


    * Now click on Download Content "Download Content" and wait;
    * The process takes about 2-5 minutes and your tablet will restart with "Original ROM".

    Foto4.jpg


    7. Blocking the "Bootloader" (OPTIONAL)

    Bootloader blocking is optional!
    After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!


    The following requirements must be met:


    * Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
    * Download and install Lenovo USB drivers (LenovoUsbDriver):
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Download this tool (LockUnlockBootloader):
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

    7.1
    * Start your tablet normally on Android and connect to PC by USB cable;
    * Extract the "LockUnlockBootloader.zip" file on the desktop;
    * Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
    * On the CMD screen, press “Enter” and then “1” and confirm again.

    LockBootloader1.jpg


    * On your Tablet will ask if you want to lock the bootloader;
    * Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.

    LockBootloader2.jpg


    Okay, your bootloader is now locked.

    7.2 Bootloader Locking Problems

    Only for those who are getting "Your device is corrupted" message.


    To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
    Follow the tutorial again with the "Original ROM" and follow these steps:

    The process for updating manually is the following:
    All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"


    1) Download the update;

    2) Use a file explorer and move it to the root folder of your device;

    3) Rename it to "update.zip"

    4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'

    Repeat these steps for each individual update

    The order of updates are:
    1) Stock ROM version (Chinês / Inglês)
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

    2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
    https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

    3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
    https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

    4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

    5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

    So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device

    Once you have done that you will have the Bootloader locked.

    *Note this procedure works as of 25/5/22, it may change if there's a new update.

    Credits to our friend "Rail-"

    8. Unlock the "Bootloader" (OPTIONAL)

    Bootloader unlocking is optional!
    Only unlock if you intend to install "Custom ROM" or "ROOT" the device.

    Before downgrading, make sure your current ROM is compatible!

    The following requirements must be met:

    * Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
    * Download and install Lenovo "LenovoUsbDriver" USB drivers:
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Download this "LockUnlockBootloader" tool:
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
    * Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
    https://www.zui.com/iunlock

    Foto UnlockBootloader4.png


    It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";


    8.1

    * Now you place the file directly in the “LockUnlockBootloader” program folder;
    * Start the process with the batch file “UnlockBootloader.bat”;

    Foto UnlockBootloader5.png


    * Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).

    Foto UnlockBootloader6.png


    Source and Links used for this guide.





    THANK YOU SO MUCH TO THE COLLABORATORS!


    ******************************************************************************************
    ******************************************************************************************
    Sem título.png
    VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)
    Sem título.png
    ******************************************************************************************
    ******************************************************************************************

    Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)

    !!! ATENÇÂO!!!
    COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
    APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
    NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.


    Os seguintes requisitos devem ser atendidos:

    * Bootloader Desbloqueado;
    * Aparelho com bateria carregada;
    * Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
    * Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
    * Baixe "ROM Original":
    https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
    * Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
    https://qpsttool.com/qpst-tool-v2-7-496
    * Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
    https://developer.android.com/studio/releases/platform-tools
    * Pacote sem "ROM"
    https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file

    Instalação:

    1. Extraia a "ROM Original"
    * Crie uma pasta na área de trabalho chamada "ROM"
    * Extraia a "ROM Original" dentro da pasta "ROM" criada;

    2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
    * Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
    * Instale o "QPST Tool.exe";
    * Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.

    3. Ative a Depuração USB "USB Debugging" do Tablet:
    * Abra as configurações "Settings" do aparelho;
    * Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
    * Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
    * Selecione a Cofiguração de Desenvolvedor "Developer Options";
    * Marque a caixa de Depuração USB "USB Debugging";

    4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):

    No Modo EDL a tela do aparelho permanece desligada!
    Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")

    Modo1 (Para Tablet desligado ou que não puder ser iniciado)
    * Desligue o Tablet;
    * Pressione e segure o botão Volume Cima (+);
    * Conecte o cabo USB no Tablet e no computador.

    Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
    * Ligue e inicie o Tablet;
    * Conecte o cabo USB no Tablet e no computador.
    * Extraia o "SDK Plataform Tools" na área de trabalho;
    * Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
    * Use o comando adb "adb reboot edl";
    * Espere o aparelho reiniciar no modo EDL.

    5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:

    Foto01.png


    6. Configuração do "QPST Tool (QFIL)":
    * Inicie o QFIL;
    * A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
    * Faça as configurações mostradas na captura de tela;
    “Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;

    Foto2.png


    * Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
    Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
    * Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
    Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"

    Foto3.png


    * Agora clique em Baixar Conteúdo "Download Content" e aguarde;
    * O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".

    Foto4.jpg


    7. Bloqueio do "Bootloader" (OPCIONAL)

    O bloqueio do Bootloader é opcional!
    Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!

    Os seguintes requisitos devem ser atendidos:

    * Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
    * Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Baixe esta ferramenta (LockUnlockBootloader):
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

    7.1
    * Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
    * Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
    * Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
    * Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.

    LockBootloader1.png


    * No seu Tablet vai perguntar se você deseja bloquear o bootloader;
    * Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.

    LockBootloader2.jpg


    Pronto, seu bootloader já está bloqueado.

    7.2 Problemas de bloqueio do "BootLoader"

    Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"


    Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
    Siga o tutorial novamente com a "ROM Original" e siga estes passos:

    O processo de atualização manual é o seguinte:
    Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"

    1) Baixe a atualização;

    2) Use um explorador de arquivos e mova-o para a pasta raiz do seu aparelho;

    3) Renomeie para "update.zip"

    4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"

    Repita essas etapas para cada atualização individual

    A ordem das atualizações é:

    1) ROM Original versão (Chinês / Inglês)
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

    2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
    https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

    3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
    https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

    4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

    5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

    Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"

    Feito isso, você terá o Bootloader bloqueado.

    *Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.

    Créditos ao nosso amigo "Rail-"

    8. Desbloquear o "Bootloader" (OPCIONAL)

    O desbloqueio do Bootloader é opcional!
    Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
    Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !

    Os seguintes requisitos devem ser atendidos:

    * Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
    * Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Baixe esta ferramenta "LockUnlockBootloader":
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
    * Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
    https://www.zui.com/iunlock

    Foto UnlockBootloader4.png


    É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";


    8.1

    * Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
    * Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;

    Foto UnlockBootloader5.png


    * Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).

    Foto UnlockBootloader6.png



    Fonte e Links utilizados para esse guia.





    MUITO OBRIGADO AOS COLABORADORES!
    3
    Como vc conseguiu instalar a versão 13.1.560? Eu estou na 13.1.555 ST e não consigo para poder bloquear o bootloader.
    2
    I was able to lock my bootloader using the 13.1.560
    it`s 22/11/2022 19:09
    Thank you all for your helps.
    2
    Guys,

    I bought the tablet with a global ROM and I tried to restore to the original ROM. I could restore but then I tried to lock the bootloader (to receive OTA updates) and I'm stuck at the fastboot mode.

    I tried to reflash the original ROM but when the tablet is rebooted after the reflashing it came back to the fastboot mode and it is in a loop.

    I'm desperate because it seems a bricked tablet.

    Can you help me?

    Thank you!
    2
    Muito obrigado, fiquei procurando nas mensagens mas não tava achando. Valeu mesmo!