How To Guide Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

[CleberJorge]

Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

!!! ATTENTION !!!
WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.

The following requirements must be met:

* Unlocked Bootloader;
* Device with charged battery;
* USB cable working and of good quality (preferably the original cable of the device);
* Remove all devices connected to the computer's USB port to avoid failures;
* Download "Original ROM":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
https://qpsttool.com/qpst-tool-v2-7-496
* Download "Platform Tools SDK" (Command Line Tool):
https://developer.android.com/studio/releases/platform-tools
* Package without "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file

Installation:

1. Extract the "Original ROM"
* Create a folder on the desktop called "ROM"
* Extract the "Original ROM" inside the "ROM" folder created;

2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
* Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
* Install "QPST Tool.exe";
* Enter the "Driver" folder and install Qualcomm USB Drivers.

3. Enable Tablet USB Debugging "USB Debugging":
* Open the device's "Settings" settings;
* Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
* Go back to Settings "Settings" and go to General Settings "General Settings";
* Select the Developer Settings "Developer Options";
* Check the USB Debugging box "USB Debugging";

4. Start the Tablet in EDL Mode (Emergency Download Mode):

In EDL Mode the device screen remains off!
There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")

Mode1 (For Tablet powered off or unable to start)
* Turn off the Tablet;
* Press and hold the Volume Up (+) button;
* Connect USB cable to Tablet and computer.

Mode2 (By Command Line using "Platform Tools SDK")
* Turn on and start the Tablet;
* Connect USB cable to Tablet and computer.
* Extract the "Platform Tools SDK" on the desktop;
* Open the computer's CMD and navigate to the extracted folder (platform-tools);
* Use the adb command "adb reboot edl";
* Wait for the device to restart in EDL mode.

5. This should now appear in the Windows device manager:

6. Configuration of the "QPST Tool (QFIL)":
* Start QFIL;
* The device port must be automatically recognized by QFIL (make sure the port is correct);
* Make the settings shown in the screenshot;
“Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;

* In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
* In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file

* Now click on Download Content "Download Content" and wait;
* The process takes about 2-5 minutes and your tablet will restart with "Original ROM".

7. Blocking the "Bootloader" (OPTIONAL)

Bootloader blocking is optional!
After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!

The following requirements must be met:

* Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
* Download and install Lenovo USB drivers (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this tool (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Start your tablet normally on Android and connect to PC by USB cable;
* Extract the "LockUnlockBootloader.zip" file on the desktop;
* Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
* On the CMD screen, press “Enter” and then “1” and confirm again.

* On your Tablet will ask if you want to lock the bootloader;
* Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.

Okay, your bootloader is now locked.

7.2 Bootloader Locking Problems

Only for those who are getting "Your device is corrupted" message.

To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
Follow the tutorial again with the "Original ROM" and follow these steps:

The process for updating manually is the following:
All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"

1) Download the update;

2) Use a file explorer and move it to the root of your device;

3) Rename it to "update.zip"

4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'

Repeat these steps for each individual update

The order of updates are:
1) Stock ROM version (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device

Once you have done that you will have the Bootloader locked.

*Note this procedure works as of 25/5/22, it may change if there's a new update.

Credits to our friend "Rail-"

8. Unlock the "Bootloader" (OPTIONAL)

Bootloader unlocking is optional!
Only unlock if you intend to install "Custom ROM" or "ROOT" the device.
Before downgrading, make sure your current ROM is compatible!

The following requirements must be met:

* Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
* Download and install Lenovo "LenovoUsbDriver" USB drivers:
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this "LockUnlockBootloader" tool:
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
https://www.zui.com/iunlock

It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";


8.1

* Now you place the file directly in the “LockUnlockBootloader” program folder;
* Start the process with the batch file “UnlockBootloader.bat”;

* Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).

Source and Links used for this guide.

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/post-85825625

Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)

Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!

www.chinahandys.net

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/post-86941429

THANK YOU SO MUCH TO THE COLLABORATORS!


******************************************************************************************
******************************************************************************************

VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)

​

******************************************************************************************
******************************************************************************************

Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)

!!! ATENÇÂO!!!
COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.

Os seguintes requisitos devem ser atendidos:

* Bootloader Desbloqueado;
* Aparelho com bateria carregada;
* Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
* Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
* Baixe "ROM Original":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
https://qpsttool.com/qpst-tool-v2-7-496
* Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
https://developer.android.com/studio/releases/platform-tools
* Pacote sem "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file

Instalação:

1. Extraia a "ROM Original"
* Crie uma pasta na área de trabalho chamada "ROM"
* Extraia a "ROM Original" dentro da pasta "ROM" criada;

2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
* Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
* Instale o "QPST Tool.exe";
* Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.

3. Ative a Depuração USB "USB Debugging" do Tablet:
* Abra as configurações "Settings" do aparelho;
* Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
* Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
* Selecione a Cofiguração de Desenvolvedor "Developer Options";
* Marque a caixa de Depuração USB "USB Debugging";

4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):

No Modo EDL a tela do aparelho permanece desligada!
Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")

Modo1 (Para Tablet desligado ou que não puder ser iniciado)
* Desligue o Tablet;
* Pressione e segure o botão Volume Cima (+);
* Conecte o cabo USB no Tablet e no computador.

Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
* Ligue e inicie o Tablet;
* Conecte o cabo USB no Tablet e no computador.
* Extraia o "SDK Plataform Tools" na área de trabalho;
* Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
* Use o comando adb "adb reboot edl";
* Espere o aparelho reiniciar no modo EDL.

5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:

6. Configuração do "QPST Tool (QFIL)":
* Inicie o QFIL;
* A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
* Faça as configurações mostradas na captura de tela;
“Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;

* Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
* Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"

* Agora clique em Baixar Conteúdo "Download Content" e aguarde;
* O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".

7. Bloqueio do "Bootloader" (OPCIONAL)

O bloqueio do Bootloader é opcional!
Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
* Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
* Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
* Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.

* No seu Tablet vai perguntar se você deseja bloquear o bootloader;
* Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.

Pronto, seu bootloader já está bloqueado.

7.2 Problemas de bloqueio do "BootLoader"

Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"

Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
Siga o tutorial novamente com a "ROM Original" e siga estes passos:

O processo de atualização manual é o seguinte:
Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"

1) Baixe a atualização;

2) Use um explorador de arquivos e mova-o para a raiz do seu aparelho;

3) Renomeie para "update.zip"

4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"

Repita essas etapas para cada atualização individual

A ordem das atualizações é:

1) ROM Original versão (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"

Feito isso, você terá o Bootloader bloqueado.

*Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.

Créditos ao nosso amigo "Rail-"

8. Desbloquear o "Bootloader" (OPCIONAL)

O desbloqueio do Bootloader é opcional!
Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta "LockUnlockBootloader":
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
https://www.zui.com/iunlock

É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";


8.1

* Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
* Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;

* Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).

Fonte e Links utilizados para esse guia.

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/post-85825625

Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)

Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!

www.chinahandys.net

https://xdaforums.com/t/install-stock-rom-xiaoxin-pad-pro-2021-tb-j716f.4347951/post-86941429

MUITO OBRIGADO AOS COLABORADORES!

 

[duonglv]

Edit: I decided to do it anyway, but after QFIL flash is done, I got this “Your device is corrupt…” message.

 

[CleberJorge]

Did you follow this guide??
Explain to me better how you performed the process and the conditions your device was in... like:
-Bootloader was unlocked?
-Which ROM was the device?
-Did you do any Updates with the Bootloader unlocked?
Try to force EDL mode (part 4. Mode1 of this guide) and redo the guide !
I made this tutorial based on 3 topics, and for me it worked well

 

[duonglv]

Oh no I forgot to unlock bootloader, I never unlocked it, just want to reinstall original rom to get L1 back. So now it’s bricked?

 

[duonglv]

Is there any way to unlock bootloader at this stage?

 

[CleberJorge]

Is there any way to unlock bootloader at this stage?

Hi
At the end of this guide talks about locking and unlocking Bootloader, see if it works for you

Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)

Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!

www.chinahandys.net

 

[gabriel6891]

Awesome compilation.
I followed the steps and get all OTA and widevine L1.

Thank you very much.

 

[SRaviton]

Is there any way to unlock bootloader at this stage?

Hi #duonglv
I faced the same problem when I was trying to lock the bootloader. The reason was that I thought the USB driver installed on step 2 was the same required on step 7 but they are not. On step 2 we need to install QUALCOMM USB driver and on step 7 it is LENOVO USB driver. After I installed the LENOVO USB driver I could get the same screen showed by #CleberJorge asking if we would like to lock the bootloader. I hope this tip works for you.

​

 

[SRaviton]

Thanks man for this detailed guideline. It worked fantastically well!
Muito obrigado Jorge. São pessoas como vc que nos faz não perder a esperança na sociedade. O uso correto de uma rede social. Resolver problemas através do compartilhamento de conhecimento.

 

[blanket]

hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot

my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked

can someone guide me?

thanks!

 

[localbus]

hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot

my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked

can someone guide me?

thanks!

You have lock the bootloader without getting the latest ROM.

All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems

 

[blanket]

You have lock the bootloader without getting the latest ROM.

All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems

Yup you’re right on the cause

I tried flashing back the original rom but it didn’t fix it

However, an hour back, I tried unlocking my bootloader with sn.img and reflashed the original rom

My device works now. Thanks!

 

[Blokester]

i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?

 

[van40]

i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?

It sounds like your fpinfo partition got deleted. Try the guide here https://xdaforums.com/t/fixing-qfil...f-p11-pro-xiaoxin-2021.4448469/#post-86923725

 

[JobinFerreira]

Spoiler: Portuguese

@CleberJorge amigo, vc tem esse update em algum outro server ?

https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

pelo mega não estou conseguindo finalizar o download.

If someone have this update on another server, please let me know.

**Mod Edit: English translation provided**

friend, do you have this update on any other server?

2.77 GB file on MEGA

mega.nz

by mega I am not able to finish the download.

If someone has this update on another server, please let me know.

 

[gunalarix8]

@CleberJorge amigo, vc tem esse update em algum outro server ?

https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

pelo mega não estou conseguindo finalizar o download.

If someone have this update on another server, please let me know.

I attached the link for 2 qpst stock firmware:-
1) from zui 12

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip

drive.google.com

2) from zui 13

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar

drive.google.com

goodluck and happy try

 

[JobinFerreira]

I attached the link for 2 qpst stock firmware:-
1) from zui 12

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip

drive.google.com

2) from zui 13

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar

drive.google.com

goodluck and happy try

Thanks, but I think you sent me different ones, I nedd the update:

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip

Do you have the link ?

Edit: solved.

 

[CleberJorge]

@CleberJorge friend, do you have this update on any other server?

https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

pelo mega não estou conseguindo finalizar o download.

If someone have this update on another server, please let me know.

Spoiler: Portuguese

Bom dia!
Eu não tenho outros links, na verdade esse link é compartilhado entre o pessoal do forum.
Faz o seguinte se for por causa do limite de download do mega:
Baixe um gerenciador de download (Jdownloader por exemplo) e espere o tempo necessario para continuar o download.
flw

**Mod edit: Translation provided**

Good Morning! I don't have any other links, in fact this link is shared among the forum staff. Do the following if it is because of the mega download limit: Download a download manager (Jdownloader for example) and wait the necessary time to continue the download. bye

 

[GeraldoNeto3]

Spoiler: Portuguese

Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +

**Mod edit: Translation provided**

Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume

 

[GeraldoNeto3]

Spoiler: Portuguese

Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +

**Mod edit: Translation provided**

Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume

im sorry, i dont know i cant write in portuguese, my bad