How To Guide Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

Search This thread

opurarafael24

Member
Feb 14, 2017
33
7
maybe you can try right-click Lenovo Composite ADB Interface and left click Uninstall device

then disconnect your tablet, check tablet in fastboot, connect tablet to PC, check what appears in device manager
I tried it. It now only shows "Android" in other devices. Fastboot devices command can't also detect it
 

opurarafael24

Member
Feb 14, 2017
33
7

Attachments

  • IMG_20221005_162511.jpg
    IMG_20221005_162511.jpg
    2.2 MB · Views: 76

opurarafael24

Member
Feb 14, 2017
33
7
I am using same version as you. Lenovo 1.1.34.

If the device manager was different from the last time you tried to lock bootloader then I guess you can give it a try and lock with the batchfile
Just so you know last time i was able lock my bootloader at the latest zui 13.1.560 with no problem at all. i am only trying your method to see if will be able to lock at zui 13.1.550 like you did to see if will be able to restore my widevine to L1.
 

Vinkel

Senior Member
Hi, first of all thanks to all the guides and tips. I had Sahara error at first when trying to flash, but got it fixed. Now I have updated to 13.1.560 manually with all the update files, and locked the bootloader, but I'm only getting Widevine L3. Any tips on how to get Widevine L1?
 

Hertz_Silva

New member
Oct 16, 2022
2
1
Olá, pessoal! Sou do brasil. Seguir todos os passos. Antes bloquear o bootloader eu atualizei até a versão 13.1.560. Deu tudo certo, em 16/10/2022.
 
  • Like
Reactions: Gara-Sama BR

kmc77

New member
Oct 28, 2022
1
0
Olá, em primeiro lugar obrigado a todos os guias e dicas. Eu tive um erro do Sahara no começo ao tentar fazer o flash, mas o consertei. Agora eu atualizei para 13.1.560 manualmente com todos os arquivos de atualização e bloqueei o bootloader, mas só estou recebendo Widevine L3. Alguma dica sobre como obter Widevine L1?
como você conseguiu consertar o erro no Sahara ao fazer o flash?????
 

Vinkel

Senior Member
  • Like
Reactions: SeaH_

zxcv88

Member
Oct 4, 2021
40
42
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

!!! ATTENTION !!!
WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).

I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.

The following requirements must be met:

* Unlocked Bootloader;
* Device with charged battery;
* USB cable working and of good quality (preferably the original cable of the device);
* Remove all devices connected to the computer's USB port to avoid failures;
* Download "Original ROM":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
https://qpsttool.com/qpst-tool-v2-7-496
* Download "Platform Tools SDK" (Command Line Tool):
https://developer.android.com/studio/releases/platform-tools
* Package without "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file

Installation:

1. Extract the "Original ROM"

* Create a folder on the desktop called "ROM"
* Extract the "Original ROM" inside the "ROM" folder created;

2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
* Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
* Install "QPST Tool.exe";
* Enter the "Driver" folder and install Qualcomm USB Drivers.

3. Enable Tablet USB Debugging "USB Debugging":
* Open the device's "Settings" settings;
* Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
* Go back to Settings "Settings" and go to General Settings "General Settings";
* Select the Developer Settings "Developer Options";
* Check the USB Debugging box "USB Debugging";

4. Start the Tablet in EDL Mode (Emergency Download Mode):

In EDL Mode the device screen remains off!
There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")


Mode1 (For Tablet powered off or unable to start)
* Turn off the Tablet;
* Press and hold the Volume Up (+) button;
* Connect USB cable to Tablet and computer.

Mode2 (By Command Line using "Platform Tools SDK")
* Turn on and start the Tablet;
* Connect USB cable to Tablet and computer.
* Extract the "Platform Tools SDK" on the desktop;
* Open the computer's CMD and navigate to the extracted folder (platform-tools);
* Use the adb command "adb reboot edl";
* Wait for the device to restart in EDL mode.

5. This should now appear in the Windows device manager:

View attachment 5618425

6. Configuration of the "QPST Tool (QFIL)":
* Start QFIL;
* The device port must be automatically recognized by QFIL (make sure the port is correct);
* Make the settings shown in the screenshot;
“Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;

View attachment 5618427

* In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
* In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file

View attachment 5618429

* Now click on Download Content "Download Content" and wait;
* The process takes about 2-5 minutes and your tablet will restart with "Original ROM".

View attachment 5618431

7. Blocking the "Bootloader" (OPTIONAL)

Bootloader blocking is optional!
After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!


The following requirements must be met:


* Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
* Download and install Lenovo USB drivers (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this tool (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Start your tablet normally on Android and connect to PC by USB cable;
* Extract the "LockUnlockBootloader.zip" file on the desktop;
* Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
* On the CMD screen, press “Enter” and then “1” and confirm again.

View attachment 5618433

* On your Tablet will ask if you want to lock the bootloader;
* Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.

View attachment 5618435

Okay, your bootloader is now locked.

7.2 Bootloader Locking Problems

Only for those who are getting "Your device is corrupted" message.


To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
Follow the tutorial again with the "Original ROM" and follow these steps:

The process for updating manually is the following:
All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"


1) Download the update;

2) Use a file explorer and move it to the root folder of your device;

3) Rename it to "update.zip"

4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'

Repeat these steps for each individual update

The order of updates are:
1) Stock ROM version (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device

Once you have done that you will have the Bootloader locked.

*Note this procedure works as of 25/5/22, it may change if there's a new update.

Credits to our friend "Rail-"

8. Unlock the "Bootloader" (OPTIONAL)

Bootloader unlocking is optional!
Only unlock if you intend to install "Custom ROM" or "ROOT" the device.

Before downgrading, make sure your current ROM is compatible!

The following requirements must be met:

* Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
* Download and install Lenovo "LenovoUsbDriver" USB drivers:
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this "LockUnlockBootloader" tool:
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
https://www.zui.com/iunlock

View attachment 5618437

It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";


8.1

* Now you place the file directly in the “LockUnlockBootloader” program folder;
* Start the process with the batch file “UnlockBootloader.bat”;

View attachment 5618439

* Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).

View attachment 5618441

Source and Links used for this guide.





THANK YOU SO MUCH TO THE COLLABORATORS!


******************************************************************************************
******************************************************************************************
View attachment 5618337 VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)View attachment 5618339
******************************************************************************************
******************************************************************************************

Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)

!!! ATENÇÂO!!!
COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.


Os seguintes requisitos devem ser atendidos:

* Bootloader Desbloqueado;
* Aparelho com bateria carregada;
* Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
* Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
* Baixe "ROM Original":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
https://qpsttool.com/qpst-tool-v2-7-496
* Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
https://developer.android.com/studio/releases/platform-tools
* Pacote sem "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file

Instalação:

1. Extraia a "ROM Original"
* Crie uma pasta na área de trabalho chamada "ROM"
* Extraia a "ROM Original" dentro da pasta "ROM" criada;

2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
* Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
* Instale o "QPST Tool.exe";
* Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.

3. Ative a Depuração USB "USB Debugging" do Tablet:
* Abra as configurações "Settings" do aparelho;
* Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
* Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
* Selecione a Cofiguração de Desenvolvedor "Developer Options";
* Marque a caixa de Depuração USB "USB Debugging";

4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):

No Modo EDL a tela do aparelho permanece desligada!
Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")

Modo1 (Para Tablet desligado ou que não puder ser iniciado)
* Desligue o Tablet;
* Pressione e segure o botão Volume Cima (+);
* Conecte o cabo USB no Tablet e no computador.

Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
* Ligue e inicie o Tablet;
* Conecte o cabo USB no Tablet e no computador.
* Extraia o "SDK Plataform Tools" na área de trabalho;
* Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
* Use o comando adb "adb reboot edl";
* Espere o aparelho reiniciar no modo EDL.

5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:

View attachment 5615929

6. Configuração do "QPST Tool (QFIL)":
* Inicie o QFIL;
* A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
* Faça as configurações mostradas na captura de tela;
“Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;

View attachment 5615931

* Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
* Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"

View attachment 5615933

* Agora clique em Baixar Conteúdo "Download Content" e aguarde;
* O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".

View attachment 5615935

7. Bloqueio do "Bootloader" (OPCIONAL)

O bloqueio do Bootloader é opcional!
Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

7.1
* Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
* Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
* Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
* Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.

View attachment 5615937

* No seu Tablet vai perguntar se você deseja bloquear o bootloader;
* Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.

View attachment 5615941

Pronto, seu bootloader já está bloqueado.

7.2 Problemas de bloqueio do "BootLoader"

Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"


Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
Siga o tutorial novamente com a "ROM Original" e siga estes passos:

O processo de atualização manual é o seguinte:
Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"

1) Baixe a atualização;

2) Use um explorador de arquivos e mova-o para a pasta raiz do seu aparelho;

3) Renomeie para "update.zip"

4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"

Repita essas etapas para cada atualização individual

A ordem das atualizações é:

1) ROM Original versão (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"

Feito isso, você terá o Bootloader bloqueado.

*Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.

Créditos ao nosso amigo "Rail-"

8. Desbloquear o "Bootloader" (OPCIONAL)

O desbloqueio do Bootloader é opcional!
Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !

Os seguintes requisitos devem ser atendidos:

* Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta "LockUnlockBootloader":
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
https://www.zui.com/iunlock

View attachment 5618321

É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";


8.1

* Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
* Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;

View attachment 5618323

* Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).

View attachment 5618325


Fonte e Links utilizados para esse guia.





MUITO OBRIGADO AOS COLABORADORES!
This is such a nice guide, thanks!
Just today I really messed something up with my partitions and had to revert to the stock ROM using QFIL. Only issue was that QFIL was throwing errors when I tried to flash. What ended up fixing it was to enter EDL, unplug the device, set up QFIL and then plug it in just before starting the download. So maybe you could add it in your guide.
Cheers!
 

DRdefaite1

New member
Jul 27, 2017
3
0
Hi everyone,

First thanks for this it worked for me, but after i get the chinese rom, i lost wifi 5ghz, does anyone ever saw this ?

thanks for reply
 

Gara-Sama BR

Member
Nov 8, 2022
6
0
Recife
I did everything step by step, but inffortunately the device still stuckl in fastboot mode. I made another procedure trough sn.img (another serial number) and i was able to unlock the bootloader. So Right now, im flashing e starting again. Thank you all!!

Portuguese

Eu fiz tudo, porém eu lockei uma global rom pra saber se ia pro l1, e nada deu certo. Flashei e nada. pra desbloquear tive que mudar o serial number e fazer o unlock com um arquivo sn.img de outro pra depois voltar o número orignal ( o que ainda vou fazer), mas já está desbloqueado. qualquer dúvida só mandar um email
 

carlosfla21

Member
Sep 26, 2022
31
13
Oi pessoal,

Primeiro obrigado por isso funcionou para mim, mas depois que eu peguei a rom chinesa, perdi wifi 5ghz, alguém já viu isso?

Obrigado pela resposta
Meu wifi de 5ghz também parou de funcionar, já fiz rect de fábrica, mas não voltou. Mas fui na casa de um parente e o wifi de 5ghz funcionava na casa dele. O que pode ser algum problema com o nosso wifi. Mas logo quando coloquei a primeira atualização do ZUI 14, o wifi 5ghz funcionou, na segunda atualização do zui 14 não funcionou mais.
 

Gara-Sama BR

Member
Nov 8, 2022
6
0
Recife
hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot

my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked

can someone guide me?

thanks!
still unlocked? If yes, install the stock rom +updates again and then lock .
Confirmed activation tablet locking on version 13.1.560 and no OTA updates to do.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)

    !!! ATTENTION !!!
    WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
    AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).

    I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.

    The following requirements must be met:

    * Unlocked Bootloader;
    * Device with charged battery;
    * USB cable working and of good quality (preferably the original cable of the device);
    * Remove all devices connected to the computer's USB port to avoid failures;
    * Download "Original ROM":
    https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
    * Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
    https://qpsttool.com/qpst-tool-v2-7-496
    * Download "Platform Tools SDK" (Command Line Tool):
    https://developer.android.com/studio/releases/platform-tools
    * Package without "ROM"
    https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file

    Installation:

    1. Extract the "Original ROM"

    * Create a folder on the desktop called "ROM"
    * Extract the "Original ROM" inside the "ROM" folder created;

    2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
    * Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
    * Install "QPST Tool.exe";
    * Enter the "Driver" folder and install Qualcomm USB Drivers.

    3. Enable Tablet USB Debugging "USB Debugging":
    * Open the device's "Settings" settings;
    * Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
    * Go back to Settings "Settings" and go to General Settings "General Settings";
    * Select the Developer Settings "Developer Options";
    * Check the USB Debugging box "USB Debugging";

    4. Start the Tablet in EDL Mode (Emergency Download Mode):

    In EDL Mode the device screen remains off!
    There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")


    Mode1 (For Tablet powered off or unable to start)
    * Turn off the Tablet;
    * Press and hold the Volume Up (+) button;
    * Connect USB cable to Tablet and computer.

    Mode2 (By Command Line using "Platform Tools SDK")
    * Turn on and start the Tablet;
    * Connect USB cable to Tablet and computer.
    * Extract the "Platform Tools SDK" on the desktop;
    * Open the computer's CMD and navigate to the extracted folder (platform-tools);
    * Use the adb command "adb reboot edl";
    * Wait for the device to restart in EDL mode.

    5. This should now appear in the Windows device manager:

    Foto01.png


    6. Configuration of the "QPST Tool (QFIL)":
    * Start QFIL;
    * The device port must be automatically recognized by QFIL (make sure the port is correct);
    * Make the settings shown in the screenshot;
    “Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;

    Foto2.png


    * In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
    Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
    * In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
    Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file

    Foto3.png


    * Now click on Download Content "Download Content" and wait;
    * The process takes about 2-5 minutes and your tablet will restart with "Original ROM".

    Foto4.jpg


    7. Blocking the "Bootloader" (OPTIONAL)

    Bootloader blocking is optional!
    After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!


    The following requirements must be met:


    * Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
    * Download and install Lenovo USB drivers (LenovoUsbDriver):
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Download this tool (LockUnlockBootloader):
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

    7.1
    * Start your tablet normally on Android and connect to PC by USB cable;
    * Extract the "LockUnlockBootloader.zip" file on the desktop;
    * Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
    * On the CMD screen, press “Enter” and then “1” and confirm again.

    LockBootloader1.jpg


    * On your Tablet will ask if you want to lock the bootloader;
    * Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.

    LockBootloader2.jpg


    Okay, your bootloader is now locked.

    7.2 Bootloader Locking Problems

    Only for those who are getting "Your device is corrupted" message.


    To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
    Follow the tutorial again with the "Original ROM" and follow these steps:

    The process for updating manually is the following:
    All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"


    1) Download the update;

    2) Use a file explorer and move it to the root of your device;

    3) Rename it to "update.zip"

    4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'

    Repeat these steps for each individual update

    The order of updates are:
    1) Stock ROM version (Chinês / Inglês)
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

    2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
    https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

    3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
    https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

    4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

    5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

    So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device

    Once you have done that you will have the Bootloader locked.

    *Note this procedure works as of 25/5/22, it may change if there's a new update.

    Credits to our friend "Rail-"

    8. Unlock the "Bootloader" (OPTIONAL)

    Bootloader unlocking is optional!
    Only unlock if you intend to install "Custom ROM" or "ROOT" the device.

    Before downgrading, make sure your current ROM is compatible!

    The following requirements must be met:

    * Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
    * Download and install Lenovo "LenovoUsbDriver" USB drivers:
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Download this "LockUnlockBootloader" tool:
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
    * Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
    https://www.zui.com/iunlock

    Foto UnlockBootloader4.png


    It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";


    8.1

    * Now you place the file directly in the “LockUnlockBootloader” program folder;
    * Start the process with the batch file “UnlockBootloader.bat”;

    Foto UnlockBootloader5.png


    * Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).

    Foto UnlockBootloader6.png


    Source and Links used for this guide.





    THANK YOU SO MUCH TO THE COLLABORATORS!


    ******************************************************************************************
    ******************************************************************************************
    Sem título.png
    VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)
    Sem título.png
    ******************************************************************************************
    ******************************************************************************************

    Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)

    !!! ATENÇÂO!!!
    COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
    APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
    NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.


    Os seguintes requisitos devem ser atendidos:

    * Bootloader Desbloqueado;
    * Aparelho com bateria carregada;
    * Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
    * Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
    * Baixe "ROM Original":
    https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
    * Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
    https://qpsttool.com/qpst-tool-v2-7-496
    * Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
    https://developer.android.com/studio/releases/platform-tools
    * Pacote sem "ROM"
    https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file

    Instalação:

    1. Extraia a "ROM Original"
    * Crie uma pasta na área de trabalho chamada "ROM"
    * Extraia a "ROM Original" dentro da pasta "ROM" criada;

    2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
    * Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
    * Instale o "QPST Tool.exe";
    * Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.

    3. Ative a Depuração USB "USB Debugging" do Tablet:
    * Abra as configurações "Settings" do aparelho;
    * Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
    * Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
    * Selecione a Cofiguração de Desenvolvedor "Developer Options";
    * Marque a caixa de Depuração USB "USB Debugging";

    4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):

    No Modo EDL a tela do aparelho permanece desligada!
    Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")

    Modo1 (Para Tablet desligado ou que não puder ser iniciado)
    * Desligue o Tablet;
    * Pressione e segure o botão Volume Cima (+);
    * Conecte o cabo USB no Tablet e no computador.

    Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
    * Ligue e inicie o Tablet;
    * Conecte o cabo USB no Tablet e no computador.
    * Extraia o "SDK Plataform Tools" na área de trabalho;
    * Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
    * Use o comando adb "adb reboot edl";
    * Espere o aparelho reiniciar no modo EDL.

    5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:

    Foto01.png


    6. Configuração do "QPST Tool (QFIL)":
    * Inicie o QFIL;
    * A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
    * Faça as configurações mostradas na captura de tela;
    “Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;

    Foto2.png


    * Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
    Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
    * Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
    Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"

    Foto3.png


    * Agora clique em Baixar Conteúdo "Download Content" e aguarde;
    * O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".

    Foto4.jpg


    7. Bloqueio do "Bootloader" (OPCIONAL)

    O bloqueio do Bootloader é opcional!
    Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!

    Os seguintes requisitos devem ser atendidos:

    * Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
    * Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Baixe esta ferramenta (LockUnlockBootloader):
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file

    7.1
    * Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
    * Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
    * Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
    * Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.

    LockBootloader1.png


    * No seu Tablet vai perguntar se você deseja bloquear o bootloader;
    * Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.

    LockBootloader2.jpg


    Pronto, seu bootloader já está bloqueado.

    7.2 Problemas de bloqueio do "BootLoader"

    Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"


    Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
    Siga o tutorial novamente com a "ROM Original" e siga estes passos:

    O processo de atualização manual é o seguinte:
    Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"

    1) Baixe a atualização;

    2) Use um explorador de arquivos e mova-o para a raiz do seu aparelho;

    3) Renomeie para "update.zip"

    4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"

    Repita essas etapas para cada atualização individual

    A ordem das atualizações é:

    1) ROM Original versão (Chinês / Inglês)
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

    2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
    https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8

    3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
    https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs

    4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/

    5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
    para
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
    https://xdaforums.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/

    Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"

    Feito isso, você terá o Bootloader bloqueado.

    *Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.

    Créditos ao nosso amigo "Rail-"

    8. Desbloquear o "Bootloader" (OPCIONAL)

    O desbloqueio do Bootloader é opcional!
    Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
    Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !

    Os seguintes requisitos devem ser atendidos:

    * Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
    * Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
    https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
    * Baixe esta ferramenta "LockUnlockBootloader":
    https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
    * Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
    https://www.zui.com/iunlock

    Foto UnlockBootloader4.png


    É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";


    8.1

    * Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
    * Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;

    Foto UnlockBootloader5.png


    * Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).

    Foto UnlockBootloader6.png



    Fonte e Links utilizados para esse guia.





    MUITO OBRIGADO AOS COLABORADORES!
    3
    Como vc conseguiu instalar a versão 13.1.560? Eu estou na 13.1.555 ST e não consigo para poder bloquear o bootloader.
    3
    The order of updates are:
    1) Stock ROM version (Chinês / Inglês)
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst

    2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
    to
    TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
    https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
    My bootloader is currently unlocked, managed to install stock rom version 12.6.211. however I am unable to get OTA to update to 12.6.238 because system update says I have an unlocked device. I can't relock because I will get stuck in bootloader if I lock it now.

    Already had to do the HAHAHA sn edit once so I am unsure how to proceed to get to 12.6.238 from stock 12.6.211.

    Am I correct to assume that
    1. I have to use magiskhide to hide unlocked bootloader status,and then

    2. attempt OTA to 12.6.238, then

    3. manual update onwards until 13.1.555, and then

    4. try lock bootloader again?


    *EDIT*

    after switching off the tablet and turning it on a few hours later, I checked system update and was surprised to see there is option to update to 12.6.238. managed to update to 12.6.238 successfully.

    repeat steps of checking for update, waiting 5min, reboot, check Settings>My device to see if new system update available.

    managed to update to 13.1.555.

    uninstalled Qualcomm driver from my pc, put tablet into bootloader, (my device appears as Other devices>Xiaoxin Pad Pro 2021 in Device Manager) then ran LockBootloader.bat as per here

    Device booted up, automatically resetted

    downloaded DRM Info and got Widevine L1

    Thanks for instructions

    *UPDATE*
    managed to get OTA for 13.1.560. updated successfully and widevine remains at L1
    2
    Guys,

    I bought the tablet with a global ROM and I tried to restore to the original ROM. I could restore but then I tried to lock the bootloader (to receive OTA updates) and I'm stuck at the fastboot mode.

    I tried to reflash the original ROM but when the tablet is rebooted after the reflashing it came back to the fastboot mode and it is in a loop.

    I'm desperate because it seems a bricked tablet.

    Can you help me?

    Thank you!
    2
    Awesome compilation.
    I followed the steps and get all OTA and widevine L1.

    Thank you very much.