Done... Everything goes perfect... Next step is to lock the bootloader.. This is under fastboot or EDL?
How To Guide Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
- Thread starter Tropaion
- Start date
Hi again!
I honestly don't know, since I heard that you shouldn't lock the bootloader when you modified it, unless it's the Stock ROM.
But there's another guide in the forums on how you can lock the bootloader.
Hi, on page 2 there is a great guide on how to lock bootloader and get L1 done by PHRS. It was working perfectly until there was a big update from ZUI 12 to ZUI 13, after which many people are facing problems when trying to lock bootloader with ZUI 12 stock rom.
Apparently the only way to do this process without getting corrupt errors is to install the latest ZUI 13:
1) download the file below.
2) use a file explorer and move it to the root folder of your device.
3) rename it to "update. zip" .
4) download the update.
5) lock the bootloader following the guide on page 2.
if you try the process, leave your feedback
Last edited:
Hello, how are you ?
Well, I saw that I was having the same problem with your lenovo p11 pro 2021, I haven't tested it yet, but I believe that the only way to lock the bootloader without getting corrupt errors is: unlock bootloader + flash with stock rom + update to the latest zui 13 + lock the bootloader.
below is the file of the last zui 13 I have, use a file explorer, put it in the root folder and rename it to "update.zip" . If you try this, please leave your feedback!
Guide 05/2022
I made a guide using the information in this post
Hope it helps people
Thanks to all collaborators
forum.xda-developers.com
I made a guide using the information in this post
Hope it helps people
Thanks to all collaborators
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F) !!! ATTENTION !!! WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE! AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE). I AM NOT RESPONSIBLE FOR...
forum.xda-developers.com
Great topic friend, I'm sure it will help a lot of people.
I saw that some forum users were getting corrupt error when trying to do a similar procedure. I believe it is necessary to download the updates manually after flashing the stock rom, can you tell me if it is really necessary?
Thank you very much
When installing Stock ROM and locking Bootloader, Tablet starts to receive OTA updates and Widevine is also restored to Widevine L1 for high resolution media.
When installing Stock ROM and locking Bootloader, Tablet starts to receive OTA updates and Widevine is also restored to Widevine L1 for high resolution media.
Last edited:
Thank you very much
When installing Stock ROM and locking Bootloader, Tablet starts to receive OTA updates and Widevine is also restored to Widevine L1 for high resolution media.
Hi
Try following this guide in (Part 4/Mode1) and putting the Tablet into forced EDL mode, and see if the PC can communicate with the PC via the USB port
Install all Qualcomm USB drivers from this tutorial and try to follow the tutorial.
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F) !!! ATTENTION !!! WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE! AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE). I AM NOT RESPONSIBLE FOR...
forum.xda-developers.com
Hi tried doing that doesn't work it just boot up to the android recovery with just 2 options like over hereHi
Try following this guide in (Part 4/Mode1) and putting the Tablet into forced EDL mode, and see if the PC can communicate with the PC via the USB port
Install all Qualcomm USB drivers from this tutorial and try to follow the tutorial.
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F) !!! ATTENTION !!! WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE! AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE). I AM NOT RESPONSIBLE FOR...
Attachments
Hello.
I saw your post here and I really appreciate your help and time making it. Could you help me with flashing? Accidently I've changed my slot A to B inside TWRP and now the tab doesn't make any sign of turning on. I think the firmware is still there, but I'll need to flash using QFIL. I think I've made successfully in entering EDL mode, Qualcomm drive appears in Control Pannel, but I'm getting Sahara error while trying to flash as below.
Could you help me to understand what I'm doing wrong?
I saw your post here and I really appreciate your help and time making it. Could you help me with flashing? Accidently I've changed my slot A to B inside TWRP and now the tab doesn't make any sign of turning on. I think the firmware is still there, but I'll need to flash using QFIL. I think I've made successfully in entering EDL mode, Qualcomm drive appears in Control Pannel, but I'm getting Sahara error while trying to flash as below.
Could you help me to understand what I'm doing wrong?
This is a guide for anyone that is trying to lock the bootloader and receiving a "Your device is corrupt" message.
I just got my Xiaoxin Pad Pro 2021 [TB-J716F] which had the global rom and unlocked boot loader. I followed CleberJorge's amazing guide to put the original Chinese rom on which worked perfectly up until you have to lock the bootloader, which I then got the “Your device is corrupt…” message.
To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again. Once you have done this you will be able to do OTA updates and you will have widevine L1 support for HD Netflix etc.
CleberJorge's guide to flash to stock chinese rom is here https://forum.xda-developers.com/t/...n-p11-pro-2021-original-rom-tb-j716f.4446671/
The process for updating manually is the following:
1) download the update.
2) use a file explorer and move it to the root folder of your device.
3) rename it to "update.zip".
4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'
Repeat these steps for each individual update
The order of updates are (this is from the stock Chinese rom version of TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
1) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip - download link https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip - download link https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in settings => My Device
@CleberJorge you might want to add this to your guide.
Spent alot of time cracking this annoying issue, so hope it helps a few people out.
*Note this procedure works as of 25/5/22, it may change if there's a new update.
I just got my Xiaoxin Pad Pro 2021 [TB-J716F] which had the global rom and unlocked boot loader. I followed CleberJorge's amazing guide to put the original Chinese rom on which worked perfectly up until you have to lock the bootloader, which I then got the “Your device is corrupt…” message.
To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again. Once you have done this you will be able to do OTA updates and you will have widevine L1 support for HD Netflix etc.
CleberJorge's guide to flash to stock chinese rom is here https://forum.xda-developers.com/t/...n-p11-pro-2021-original-rom-tb-j716f.4446671/
The process for updating manually is the following:
1) download the update.
2) use a file explorer and move it to the root folder of your device.
3) rename it to "update.zip".
4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'
Repeat these steps for each individual update
The order of updates are (this is from the stock Chinese rom version of TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
1) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip - download link https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip - download link https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in settings => My Device
@CleberJorge you might want to add this to your guide.
Spent alot of time cracking this annoying issue, so hope it helps a few people out.
*Note this procedure works as of 25/5/22, it may change if there's a new update.
Last edited:
Just wanna add that in the Chinese Lenovo forum stated that for v13.1.555 you can't downgrade the firmware , also tried to root it also seems to have issues with regards of boot.img patched magisk not working.
did you try to update your tablet just after the 2nd update? I've followed another guide to update the tablet to ZUI 13.0.364 after the QFIL flash, but I got that corrupt message as well. I've bought it on AliExpress and it also went with unofficial global ROM running, bootloader unlocked then. now I've updated to 13.1.555, do you think this is going to work? if I got the message again, will need to flash and reinstall every app again + files.
I found if I hadn't updated to 13.1.555 I could not lock the bootloader successfully. I would always get the corrupt message.
Thank you so much for the compliments, that's how we can help each other!
I don't know if there is a difference from device to device, because in my case I did exactly what is in the tutorial..
1- Original ROM
2-Lock Bootloader
3-OTA Official Update
But I've seen reports here on the forum that there really are some people who have problems
Thank you so much for sharing your experiences and knowledge.
Looks like there's an update missing from the ZUI package from ZUI 12.6.211 to ZUI 12.6.238
I can confirm these:
- Even with unlocked bootloader, you still get all the ota update.
- You have to update to the latest version that the tablet has been, and then you’d be able to lock bootloader again.
- After the bootloader’s been locked, widevine’s still L3, nothing change.
- Even with unlocked bootloader, you still get all the ota update.
- You have to update to the latest version that the tablet has been, and then you’d be able to lock bootloader again.
- After the bootloader’s been locked, widevine’s still L3, nothing change.
No, with the bootloader unlocked you do not receive OTA updates
With the generic Global ROM, you only get an OTA update and nothing else, it's on ZUI 12
You need to go to ROM Stock and lock the bootloader or go to ROM Stock and do manual updates and lock the bootloader!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
111
this is weird, you can try watching something on netflix, you might be able to watch it in high resolution. If not, you can try the process again. but then you will have to unlock it. the bootloader, and manually install the versions, and then lock the bootloader. you can put here what will happen after trying to watch Netflix or other servicesLast time I tried to lock this tablet it says device corrupted i didn't do it in fastboot let me try your steps and let's see. Thanks.
It worked!! Thanks a lot for sharing info here!
Device is showing certified in Play store but still L3 not L1. That's fine as long as it is locked now. -
18How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve.
So I tried to restore the Stock ROM in the meantime and will share my experience.
Your data will be deleted, try it at your own risk.
Requirements:
- Download Stock-ROM and unpack it
- Download and install QFIL-Tool + Driver
- PC with ADB-Tool
- Boot tablet in EDL-Mode, there are two ways (in EDL-Mode screen always remains off):
- If tablet is fully booted: use adb command "adb reboot edl"
- If tablet is off or can't be booted: press the volume up button and hold, plug the usb cable into the tablet and PC and wait a few seconds
- Now this should appear in your device manager:
- Start the QFIL-Programm, it should detect the port with the same name.
- Go to "Configuration" -> "FireHose Configuration". At device type select "ufs" and tick "Reset After Download" then press ok:
- Back in the main window select "Programmer Path" and browse to the ROM-Folder, select the file "prog_firehose_ddr.elf".
- Select "Content XML" and browse to the ROM-Folder, select the file "contents.xml"
- Click "Download Content" and wait, may take a few minutes
- After its done, this status message should a appear and the tablet should reboot.
Done, Stock-ROM should boot now.10Hi guys, I'll leave my contribution here. I was forced to reinstall the ROM as I had the excellent idea to lock Bootloader with the 'Global' ROM installed. Everything went wrong and my tablet didn't start anymore, it was just on the Fastboot screen. The “Tropaion” tutorial helped me a lot.
I was using Windows 11, and it didn't recognize the tablet at all and when it did, it gave an error at the time of “download content” in QFIL, the famous error of “sahara fail”. At least in my case, I had to do the procedures for Windows 10 newly installed on the machine.
Starting from the beginning
- I used the QFIL that comes with QPST_2.7.496. Qualcomm's driver installer came with it as well. (https://qpsttool.com/)
- After installing QPST I put the ROM folder inside the bin folder. Example: "C:\Program Files (x86)\Qualcomm\QPST\bin\TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qps"
- I started QFIL and configured it according to what “Tropaion” taught.
The EDL Dilemma
- As my tablet was already stuck on the Fastboot screen, so I turned it off and pressed the volume up button, connected the cable to the PC and tablet, waited a few seconds and released the button.
- Soon it went into EDL mode (It stays with the screen off, but connected to the PC) and I continued the procedure in QFIL. (If there is any error and you want to exit this mode just press the volume up & Power On/Off button together for ~30s, but if everything works out you won't need to)
- Then he did the installation and the Lenovo Xiaoxin Pad Pro 2021 worked perfectly. But with the bootloader unlocked.
Locking Bootloader with Chinese ROM installed
- I downloaded platform-tools_r31.0.3 (https://developer.android.com/studio/releases/platform-tools)
- I unzipped it into Disk C. Example: “C:\platform-tools”
- I started CMD in the folder
- Again I turned off the tablet, started fastboot (low volume button & Power On/Off together for ~30s) and connected to PC.
- I downloaded Drive ADB (https://developer.android.com/studio/run/win-usb?hl=pt-br)
- I went to Device Manager and updated the drive (https://androidmtk.com/install-google-adb-driver-manually)
- I went back to CMD, and typed in the following commands:
- fastboot devices (To check if the Lenovo Tablet really was there)
- fastboot flashing lock (To lock Bootloader)
- Then the tablet asked me to confirm if I was sure I wanted to lock the bootloader (Just use the volume button to navigate and Power On/Off to confirm)
- That's it. Bootloader locked!!
- When I turned on the Xiaoxin Pad it already had an update from Lenovo. And it was updated successfully!
- I installed the Play Store through the lenovo store, and even the tablet is with the Play Protect Certificate activated and Widevine L1 everything ok.
Important: This method worked for me, but it doesn't mean it will work for you. Unforeseen events can happen during the procedure. As I've never installed a ROM in my life, it took me quite a while to fix my error and get my Tablet back up and running
. So do it at your own risk.
Hope this helps
New update Lenovo
DRM Info
[Update] ZUI 13.0.364 is now available!!
8Finally managed to install China ROM. I started with unlocked bootloader and Banggood tablet with global ROM.
Everything OK, finally got Widevine L1, OTA. Only English and Chineze languages. Netfix works in FullHD.
I have run into sahara fail issue on windows 11. To resolve this, I followed @PHRS and @Tropaion guides. USB debugging has to be enabled first in the tablet menu.
1. Install Qualcomm USB Driver v1.0 and restart computer
2. Install QPST Tool in default path ProgramFiles(x86) https://qpsttool.com/qpst-tool-v2-7-496
3. Extract ROM content in C:\Program Files (x86)\Qualcomm\QPST\bin\TB-J716F_CN_OPEN_USER; I guess this is important, because if I left the ROM in a Desktop folder, I got Sahara fail. May be due to windows 11 security implementation and ProgramFiles file access stuff...
4. Connect tablet in EDL mode - I did it with with adb command "adb reboot edl"
5. Check if the tablet is visible in Device manager, under Ports (COM&LPT); note the port number. Tablet screen is black.
6. Execute as Administrator "C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe"; the port number from step 5 should be visible in QFIL.
7. Setup QFIL / FireHose Configuration as indicated in Opening post (0-Sahara, ufs, reset after download)
8. Browse Programmer path with "C:\Program Files (x86)\Qualcomm\QPST\bin\TB-J716F_CN_OPEN_USER\prog_firehose_ddr.elf" and Content XML with "C:\Program Files (x86)\Qualcomm\QPST\bin\TB-J716F_CN_OPEN_USER\contents.xml"
9. Click download content. For me it worked fast, the log showed the processes running in a few steps. I had a USB3 connection, maybe this is why it went very fast (~20-30 seconds).
10. Tablet can be rebooted with the new ROM, but still Widevine L3
11. To lock the bootloader, first install LenovoUsbDriver_v1.1.47
12. Use @Tropaion lock batchscript https://forum.xda-developers.com/t/...n-pad-pro-2021-tb-j716f.4347321/post-85775623
13. The bootloader is locked and the tablet is reset. Widevine L1 and OTA after this.
14. A bit weird boot with all the Chineze, but embedded apps can be easily uninstalled. I installed Aptoide, then Google Play, Netflix, Swiftkey instead of the chinese one, etc.
Thank you @Tropaion, @PHRS and the rest of XDA community. All the best!
LE. By the way, when I first got the tablet I thought the wifi module is broken or something, because it connected my wifi, but with limited connection. I finally realized that the date/time was wrong (because of the empty battery I guess), and after I manually adjusted the date, internet connection was established.4
Hello @sabaku_chris! Your tablet has unofficial Chinese ROM.
The official Chinese ROM does not come with the Google Play Store pre-installed and only comes in two languages, English and Chinese. It comes with firmware upgrade option (via OTA), with Widevine L1 and, if you install Google Play Store, comes with Play Protect Certificate.
An advice: But if you don't need these features, continue with the version that was already installed on it. In case of doubt, do not change the ROM.4This is a guide for anyone that is trying to lock the bootloader and receiving a "Your device is corrupt" message.
I just got my Xiaoxin Pad Pro 2021 [TB-J716F] which had the global rom and unlocked boot loader. I followed CleberJorge's amazing guide to put the original Chinese rom on which worked perfectly up until you have to lock the bootloader, which I then got the “Your device is corrupt…” message.
To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again. Once you have done this you will be able to do OTA updates and you will have widevine L1 support for HD Netflix etc.
CleberJorge's guide to flash to stock chinese rom is here https://forum.xda-developers.com/t/...n-p11-pro-2021-original-rom-tb-j716f.4446671/
The process for updating manually is the following:
1) download the update.
2) use a file explorer and move it to the root folder of your device.
3) rename it to "update.zip".
4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'
Repeat these steps for each individual update
The order of updates are (this is from the stock Chinese rom version of TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
1) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip - download link https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip - download link https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip - download link https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in settings => My Device
@CleberJorge you might want to add this to your guide.
Spent alot of time cracking this annoying issue, so hope it helps a few people out.
*Note this procedure works as of 25/5/22, it may change if there's a new update.
