Internal Storage is Damaged on G6 U10

[SepehrAzureSky]

HI there I'm new here but this forum is very informative tnx.
Here is the problem:

Image URL: http://cld.persiangig.com/download/GsIv0k/dl
Do u have any solutions please?
I have tried Flashing and ROM ... but no results..
What about this: http://forum.xda-developers.com/showthread.php?t=1838204 ???

 

[anjumm98]

i have same problem will any body give answer ?

 

[omid.kurd]

i have same problem

 

[igor.smiljanic]

Solved?

HI there I'm new here but this forum is very informative tnx.
Here is the problem:

Image URL: http://cld.persiangig.com/download/GsIv0k/dl
Do u have any solutions please?
I have tried Flashing and ROM ... but no results..
What about this: http://forum.xda-developers.com/showthread.php?t=1838204 ???

Have you solved this problem?

 

[maxprono1]

may be hardware problem

 

[SepehrAzureSky]

Have you solved this problem?

No.. Not solved yet. Desperately looking for a solution.

 

[SepehrAzureSky]

may be hardware problem

Yes. It is a hardware problem. As far as I know there are two options, either changing the hardware nor mounting a apart of SD Card as Internal Memory. First one is useless as it is costly and results might not be conclusive. However, I think, the latter might be applicable. But I don't know how. I would appreciate any help regarding this. Thank you.

 

[valesquez]

This has happened to me too, I need help!

 

[waxyboon]

Please help

I do faced the same problem, anyone come out a solution please,appreciate!!

 

[washichi]

FOR EVERYBODY WITH THIS PROBLEM, TRY THESE STEPS:

(if you can/have your bootloader unlocked & you can unstall U10 or L11 roms then download the U10 slimstock, or L11 deodexed rom)

- download G6 knife (pinned post in the facebook group)
- open G6 knife > download offical U10 rom (if you had android 4.3 before your problem then download 4.3, if you had 4.4 download 4.4kitkat)
- format your sd, place the downloaded firmware on your sd:
SD/dload/update.zip (or SD:/HwOUC/update.zip depends if you are on android 4.3 or 4.4)
- insert sd and try to boot up your phone (without cable attached)
- if nothing happens open G6 knife again and boot your phone into fastboot and attach it to pc
- use G6 knife program to boot into recovery ( or do it with adb) (or hold vol+ power)
- select install zip from sd, select the update,

you can download g6 knife here:
https://www.facebook.com/groups/huawei.g6.development/permalink/462401503919107/

you can do all of this without G6 Knife, but this tool makes it alot easier cause you don't have to look for files or commands

 

[SepehrAzureSky]

FOR EVERYBODY WITH THIS PROBLEM, TRY THESE STEPS:

(if you can/have your bootloader unlocked & you can unstall U10 or L11 roms then download the U10 slimstock, or L11 deodexed rom)

- download G6 knife (pinned post in the facebook group)
- open G6 knife > download offical U10 rom (if you had android 4.3 before your problem then download 4.3, if you had 4.4 download 4.4kitkat)
- format your sd, place the downloaded firmware on your sd:
SD/dload/update.zip (or SD:/HwOUC/update.zip depends if you are on android 4.3 or 4.4)
- insert sd and try to boot up your phone (without cable attached)
- if nothing happens open G6 knife again and boot your phone into fastboot and attach it to pc
- use G6 knife program to boot into recovery ( or do it with adb) (or hold vol+ power)
- select install zip from sd, select the update,

you can download g6 knife here:
https://www.facebook.com/groups/huawei.g6.development/permalink/462401503919107/

you can do all of this without G6 Knife, but this tool makes it alot easier cause you don't have to look for files or commands

My device is not recognized by G6 knife.. even after using the f option, my phone does not ask for any USB debugging permission. Nothing happens.

 

[washichi]

My device is not recognized by G6 knife.. even after using the f option, my phone does not ask for any USB debugging permission. Nothing happens.

you can use g6knife to download firmware without attaching your phone,
you can use adb to boot into recovery and force it to update

 

[SepehrAzureSky]

you can use g6knife to download firmware without attaching your phone,
you can use adb to boot into recovery and force it to update

I had someone to install ROM before, but the problem did not resolve.
Do you think I can fix using this way? If yes, I would be thankful to tell me how. It is my first time. I am unfamiliar with the steps.
OK now, I installed the Knife; I plug my phone using USB cable; I run it, then I press 0 to verify the device. However, the program does not detect it.
Moreover, I have no access to my phone, and I cannot allow USB debugging through the phone.
I e-mailed HUAWEI they did not answer at all. It seems like no one can help God!

 

[mental torture]

i ve got the same problem..plz can anyone help...i hav tried asz much options like hard reset.upload sdk..bt it wont work..plz anyone there to help

 

[persona78]

Came to this Facebook page, there is a few things you can try:

https://www.facebook.com/#!/Huawei-...w-unavailable-1705571879711006/?ref=bookmarks

 

[anahit]

I have the same problem. Did anyone manage to solve it?