ivoler Screen Protector Great Fit!! Much better than any other brands I tried.

[david870325]

I got mine in the mail yesterday,and bought the ivoer screen protector on Amazon.Carefully packaged with a nice little kit, including a dust removing tape, alcohol wipe and screen cleaning cloth. Instructions were clear and direct and installation was a snap. None of the stupid bubbles that you get from the screen protectors. Tactile feel is perfect, and response from the phone after installation is unchanged and very responsive. The screen itself is high quality and flawlessly clear, the cutouts fit the phone (around the camera, speaker, etc) perfectly. Due to the phone having a slight curve towards the edge, there is no way to make glass bend that way so you will have a small (appx 1/8th inch) space where the protector ends and the phone continues. If you have a case on the phone, you will barely notice. I paid $35 to have one of these installed at Verizon on a G3, and if anything I think this $12 beauty looks even better. Just take your time to install it, and make sure you wash your hands clean of any oils before beginning. I installed it in about 60 seconds. Adhesive will not fully grip until you press it down firmly and really make sure it is on there, so you can adjust the fit if your aim is off.
Here I share the picture that have installed the screen protector, it shows very smooth and clear,It's all perfect!!

 

[zathus]

Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.

Example.. The first one is your ivoer.

The second is one of the mime protector someone posted in the other thread.

You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)

It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself

 

[wadamean]

I ended up pulling the trigger for the mime ghost glass and just saw this post. I guess I will stick with it and see.

 

[david870325]

Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.

Example.. The first one is your ivoer.

The second is one of the mime protector someone posted in the other thread.

You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)

It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself

Yse, I have never had a screen protector as easy to apply and without bubbles.It fit the phone very well,this is the best source for for protecting the face of a cell phone.

 

[makavelisk]

I'm going to pull the trigger but Did you get the .2 or the .3 thickness?

 

[makavelisk]

Well got the .2 ivoler one for 12 bucks and what a freaking turd it is. It's no where cut right and is way to big for the phone. It not only hangs off the bottom but the top as well. Send them an email to see what they are going to do about it.

 

[wadamean]

Well got the .2 ivoler one for 12 bucks and what a freaking turd it is. It's no where cut right and is way to big for the phone. It not only hangs off the bottom but the top as well. Send them an email to see what they are going to do about it.

You should have stuck with the mime. It's such a breeze to install. Plus its case friendly too. The adhesive sticks automatically to the screen as much as possible.

 

[makavelisk]

You should have stuck with the mime. It's such a breeze to install. Plus its case friendly too. The adhesive sticks automatically to the screen as much as possible.

I agreed. Got this response from ivoler:

Hello

Based on the photo you sent is, you fit is correct. Please be reminded that the Droid Turbo does have curved edges on all four edges, and as the tempered glass screen protector is flat therefore it is designed to only able to cover the flat part of the screen.

Thank you


So clearly they think it is supposed to be lifted off the screen to help collect dust. Lol. I am going to take it off and send it back to Amazon and buy the mime. What a waste and a crappy company.

 

[makavelisk]

These are the pictures I even sent them that they state is correct fitment. The best part is that they claim it is rounded edges but they are sharp as hell. I guess you get what you pay for. Mime here I come.

 

[verve50]

Just received the .2 went on perfect adhered good all over. Within 20 minutes after it was installed I dropped my glassed they hit the Side of the screen and chipped the screen protector. You can't see it from the pic but it is starting to hairline crack...

 

[david870325]

Highly recommend iVoler screen protector for Nexus 6!!

Highly recommend iVoler screen protector for Motorola Droid Turbo!!

Installation was very easy and there is not bubble at all. It only takes me two times to install it properly. You'll just need to follow the instruction and use the tools provided with the packaging.all the cutouts are accurate and I like the fact that it does not covers the front facing camera and also the proximity sensor. The screen is HD clear and super smooth as if there is nothing on it!I'll never go back to those cheap plastic screen protectors again.

 

[wadamean]

I ended up getting three replacements for from ivoler for the glue lasted only for a little while on the edges and the lint/dirt would get in there. I got fed up and got Mime and have had it on for a month with no problems whatsoever.

 

[lloydapalooza]

I can confirm that the ivoler glass screen protector fits and that the edges stick to the screen, at least for me. I don't know why some people are having the opposite experience.

 

[Claps1775]

I bought mine off Amazon for $6.95 for a 2 pack. I got the .2m. Ivoler screen protectors are a dust magnet. Put mine on it the bathroom as it is the best light to see if the screen is clean. Washed my hands and cleaned the screen with the provided tools. Installed it between the bevel edges. Later had ghosting. Took it off and installed the 2nd. Washed hands, cleaned screen, and when I removed the cover on the screen protector. All I heard was static electricity. Dust stuck to it as soon as I pulled the cover off. Installed of my phone and it was bad. Took its off and clean my outterbox defender case and put my turbo back in. The heck with that. Sent them a email will all my info. No picture as I do not have a camera another phone to take a picture. What good can that do. Most know that trying to get a picture if you could, would not show it well as it does in person. Got a email back and they asked for my order id and a picture. They must have not even read my email. I had my Amazon order id in the email, 2 sentence. I explained to them that I do not have a camera or another to take a picture. Also that I do not have the screen protectors on my turbo anymore. I miss Zagg screen protectors. Never had a problem like I did with ivoler. At lest I am out $6.95 vs 19.99 if you bought it from there site and that is 1 not 2 from Amazon. I doubt I will get 2 replacement or my money back. Can never go wrong with my outterbox. If the ivoler was a success install like most here had. I would have removed the screen protector in the outterbox. O well.

 

[jay.whit[email protected]]

Got the .3 for my Droid Turbo. It's saved my screen twice in two years. Getting ready to put on the second one, as the first is all cracked up now. Very scratch resistant. Put this on somewhere super clean. I have dogs and cats with super fine fur. A hair you can't even see will make you curse.

 

[rick302]

Is this the Droid turbo or the droid 2 ?

Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.

Example.. The first one is your ivoer.

The second is one of the mime protector someone posted in the other thread.

You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)

It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself

 

[ChazzMatt]

Is this the Droid turbo or the droid 2?

Pictures clearly show both are Droid Turbo (Quark).

 

[rick302]

Pictures clearly show both are Droid Turbo (Quark).

Like the looks of the fit... even though it falls slightly short of the full screen that's probably why it fits so well. Also I have not seen the ivoler in the .3 VERSION for the turbo (all the ivoler .3 screen protectors I have found say the are for the turbo 2) in any case I have ordered the .2 version for my phone.

---------- Post added at 01:16 PM ---------- Previous post was at 12:32 PM ----------

Like the looks of the fit... even though it falls slightly short of the full screen that's probably why it fits so well. Also I have not seen the ivoler in the .3 VERSION for the turbo (all the ivoler .3 screen protectors I have found say the are for the turbo 2) in any case I have ordered the .2 version for my phone.

Update after a little more searching I found the .3 version on Amazon ... so I will give it a go as well... should have plenty of spares . I currently have a Otckicks on my Droid Turbo but it does not seal well around the edges. Also I am using the Otterbox commuter case which is less bulky than the defender and the Lifeproof base as well, both of which are good but bulky... however the Lifeproof case really muffled the sound on the Turbo.