I give you another cent: Use ext2/ext3/ext4. Also no 4GB limitation and in addition it is much faster than ms's ntfs!
[JB] CM10 Android 4.1.2 for the Defy(+)
- Thread starter Quarx
- Start date
-
- Tags
- android 4.1 cm10 cyanogen 10 for defy defy cm10 defy rajnikant defy+ mb526 eppy+quarkx= motorola rolled future is here god jellybean nicholas omsk quarx > chuck norris quarx for world emperor quarx gooood quarx myth of defy! quarx our defy deity quarx rlz quarx the chosen one quarx thou...areth...god quarxorola singapore take that motorola winged doom zee defy is the best
M
mariosanoguera
Guest
ive been reading about this new partition stuff, we are talking about changing the file system of the memorys internal space or the microsd card? if its from the microsd card, it increases overall performance? ty
It's a lot better. Unfortunately, it doesn't mount on Windows machines by default. I use Linux but if I need to transfer files b/w someone else's computer I'll need to install an application first.
SD card r/w speed should improve. Also, as mentioned earlier NTFS allows a single file to be larger than 4GB in size.
Thanks, but SD tools had once shown 8.2MB/s write speeds, at the time the card was formatted by the Defy itself (fat32?). Now the transfer of a 14.2GB file to the card (always inserted on my phone) was done at 10.5MB/s (as shown by my notebook's Win7 monitor). Besides, NTFS, although old, is widely accepted everywhere...
just installed the latest build
its just so smooth
no lags till now
its just so smooth
no lags till now
Installed 02.11 zip.
It's marginally faster than v4, but still not as fast as v3.
Everything's running great, with just 2 issues:
1. Phone heats up a LOT if I use it while charging. Even rebooted once, without any specific reason.
2. TWRP (which worked with 18.10, v3 and v4) doesn't get installed now.
It's marginally faster than v4, but still not as fast as v3.
Everything's running great, with just 2 issues:
1. Phone heats up a LOT if I use it while charging. Even rebooted once, without any specific reason.
2. TWRP (which worked with 18.10, v3 and v4) doesn't get installed now.
I have updated to the latest version, and installed the back-light FIX.zip from a few pages back but still cannot keep the buttons lit. I am using manual screen brightness and when I try to set button brightness, the buttons glow but turn off immediately after I click OK. Afterwards, if I try to change the the screen brightness level, they glow till the screen is awake but turn off again when switch off the screen. This time waking up the screen does not make the buttons glow and I need to change brightness all over again. Is there any fix to this? Thanks.
I wanted to get my battery down to 0 fast so I got a app from the play store and look at the magic 
My battery gets to 0.4 when in sleep but goes very fast when WiFi is on......
My battery gets to 0.4 when in sleep but goes very fast when WiFi is on......
Attachments
hi, i live in italy and wind is my carrier. I still have network problems, but semms that everyone else solved this problem with 18/10 update, isn't it?
Check your baseband, the default one wasn't optimized for me. You can find it in advanced settings.
Sent from my MB526 using xda app-developers app
Italy too here.. do you use default central europe or italy baseband? Thanks
I am having a drain of 1% every 3 mins.I am just browsing xda.I just upgraded to 02 11 and cleared dalvik cache.
Sent from my MB526 using xda app-developers app
OK and what is your conclusion ?
Sent from my Defy green lens running last cm10 Quarx build
I jus want to know ,am I missing something or this drain is normal?
Sent from my MB526 using xda app-developers app
Having problems with WiFi it keeps disconnects every sec in latest build
Sent from my MB526 using xda premium
Sent from my MB526 using xda premium
I think It's just a too short and incomplete test to have an idea...
It depends on so many things that we can't say like this.
Sent from my Defy green lens running last cm10 Quarx build
Running 02/11 build and in this build File manager is not working when clicking on the icon the following message appears "unable to run in root access mode changing to safe mode apply the change" I have cleared the data and still does not work. Please advise if this is a big with the app.
---------- Post added at 08:32 PM ---------- Previous post was at 08:27 PM ----------
The battery drain on 02/11 build gives me only 24 hrs or so before it gets to 5% plus it drops suddenly from 60% to 50% and again from 30% to 20% anyone else notice this with their battery?
---------- Post added at 08:32 PM ---------- Previous post was at 08:27 PM ----------
The battery drain on 02/11 build gives me only 24 hrs or so before it gets to 5% plus it drops suddenly from 60% to 50% and again from 30% to 20% anyone else notice this with their battery?
it's not normal, cause i've the same build installed and a drain of 15 to 20% within 6 hours (normal standby, wifi off). mb525 green lense and battery now more than 2 years old and with a lot of charging cycles (because i used it too as an ebook reader).
---------- Post added at 08:01 PM ---------- Previous post was at 07:48 PM ----------
as far as i know the controller of the defy is very simple, sees only 0 30 50 70 and 100% other values are some how calculated, you can install a battery wdiget https://play.google.com/store/apps/...1bGwsMSwyLDEsImNvbS5wancuYmF0dGVyeXdpZGdldCJd that also shows graphs off battery %, voltage and temperature, maybe so you can get an idea what app or configuration makes your battery drain.
the cm file manager don't work here for me too, maybe works in the next build.
Last edited:
I'm still @ 18/10v4.
- Car Dock doesn't work
- Phone goes in Standby when connected to power
In summary i can't use my phone for navigation in my car.
Finaly i don't find the setting to disable standby with power connected. :-\ Can someone point me to the right direction??
- Car Dock doesn't work
- Phone goes in Standby when connected to power
In summary i can't use my phone for navigation in my car.
Finaly i don't find the setting to disable standby with power connected. :-\ Can someone point me to the right direction??