**[JB][ICS][GB] Kernel Repository ***NEW: NX 1.4.2 // Asylum Kernel 01072013 (AOSP)

[Formhault]

So, AA is now admin of this topic?

If that is so... AA... Put NX kernel in the OP

Sent from hyperspace

 

[AA1973]

Thanks @chasmodo for your warm words, the trust and being a friend. Concerning the thread, your kernel thread, I will do my very best to keep it fresh and clean. It is an honour to inherit it, but a burden at the same time.
Thanks @all who posted a message due to the change. I will start adding some new kernels later tonight (NX kernel, the coh Kernel,...)
If a kernel gets posted in the N7000 forums, I won't post it here instantly, but ASAP. Which literally means as soon as possible.
Just a heads up, upfront - What I don't want to see here:

Does this XY kernel work with XY Rom?"
How to flush™ this?
Can I fly to the moon with it?
Does it support my USB microwave?

Those are questions for the corresponding kernel thread or your own thread in Q&A section.
I hope that this thread stays the same as when it got started by RC Chasmodo: a one-stop-shop.
That's it... Let's get started and enjoy chasmodo's kernel repository as it was meant to be.
Thanks :thumbup:

 

[beerbong]

Couldn't be in better hands. Thanks chas for creating the suppository and AA for getting the relay.

 

[AA1973]

Started updating the thread
Added crime of heart's Hello World kernel, renamed DH kernel to NX kernel, and added some changes.

TW>JB #Speedmod - CHANGELOG:
**
K5-5:
- Rebuilt using GCC 4.6 toolchain from Android NDK r8e
**
Thread: http://forum.xda-developers.com/showthread.php?t=2181599

TW>JB #c.o.h._Kernel - CHANGELOG:
**
v1.1.15:
Initial release with fixed modules and initramfs.
GPU steps set to : 133, 267 and 300MHz.
Speedmod K5-3 fixes included.
Hydracore sched and gov options.
Siyah Kernel GPU optimizations.
Includes PhilZ v4.93.6 touch recovery (with bootloop fix!) and root with busybox.
**
Thread: http://forum.xda-developers.com/showthread.php?p=40765028

CM10.1 #NX Kernel - CHANGELOG:
**
v1.1.5:
Attempt fixing recovery to avoid any data loss. This means recovery of v1.1.5.
Fixed alignment trap turning on automatically. It's off now.
Toolchain fixes for SMC architecture and GCC 4.6 compatibility
Added network tweak
Reverted back old voltage table
**
Thread http://forum.xda-developers.com/showthread.php?t=2192893

 

[AA1973]

Update 30/04:
CM10.1 #Asylum Kernel - CHANGELOG:
Asylum_Kernel_CM10.1_20130429_N8Mali_CWM.zip and Asylum_Kernel_CM10.1_20130430_N8Mali_TWRP.zip added.

Changelog:

[B]
CWMR bumped up to 6.0.3.1
TWRP upgraded to 2.5.0.0

[/B]

All the additional arnies™ are still the same.
This kernel is not overclocked or undervolted.
Additional governors:

Asswax
SmartAss2
LulzactiveQ
Adaptive
Interactive
SavagedZen
LagFree

DL Links in OP.

 

[toxicthunder]

congratulations and good work AA!

someone (maybe @chasmodo) please recommend AA for RC in the RC-specific forums. His contributions are highly appreciated and he is more than deserving, especially compared to several others with the same title.


edit: I just did from my side by dropping a message to the committee. Cheers!

Sent from my GT-N7000 using xda premium

 

[AndroidSlave]

congratulations and good work AA!

someone (maybe @chasmodo) please recommend AA for RC in the RC-specific forums. His contributions are highly appreciated and he is more than deserving, especially compared to several others with the same title.


edit: I just did from my side by dropping a message to the committee. Cheers!

Sent from my GT-N7000 using xda premium

All that is required is ANY moderator to give the title. I would recommend talking to zacthespack

Sent from my Samsung Galaxy SV using Tapatalk 3

 

[poochewer]

suppository

Couldn't be in better hands. Thanks chas for creating the suppository and AA for getting the relay.

I hope the "suppository" part is not compulsory!!!!! LOL :laugh:

 

[chandrus1983]

Superb thread!! One stop shop
Thanks!

 

[mcmaddcatt]

NX kernel current version is at 1.1.9. With santized ramdisk and wifi fixes. Get it while it's hot! Link @ OP.

 

[toddmikola]

Can you please share the link to the download for: Kernel_CM10.1_Official_20130403_n7

Looking for the download location, for file: Kernel_CM10.1_Official_20130403_n7000_N8Mali.zip
Can someone assist please?

Thank you!!!!!

Asylum_Kernel_CM10.1_20130403_N8Mali_CWM.zip and Asylum_Kernel_CM10.1_20130403_N8Mali_TWRP.zip published in the OP.

Asylum CM10.1 kernel differs from the official CM10.1 one inasmuch as it offers more governors.
Asylum kernel has parallel versions - CWM and TWRP - and the only thing different about them is the recoveries.
The kernel part is exactly the same in both of them.

This kernel is not overclocked or undervolted.

Additional governors:

Asswax
SmartAss2
LulzactiveQ
Adaptive
Interactive
SavagedZen
LagFree

 

[mcmaddcatt]

It's in the original post under cm10.1 kernels.

 

[AA1973]

They are hidden under a

Spoiler

 

[linhvng.2212]

I think c.o.h's kernel is @ v.1.3.7 mate

 

[AA1973]

Update NX Kernel & c.o.h. Kernel

TW>JB #c.o.h._Kernel - CHANGELOG:
**
Changelog v1.2.28 --> v1.3.7:

Used Linaro GCC 4.7.3 (Even faster now!)
Optimized GPU thresholds (Can really go to 400MHz in load now)
Enabled SWAP and ZRAM support (need to be configured manually, so just for experts)
Possible fix for MIUI TW based MIUI ROMs (all should work without problem now, not tested!)

It could be my last build, let's see if i can continue later...

v1.1.15 --> v1.2.28
Create from scratch, no more based on Hydracore. Less (maybe no) bugs.
Samsung video player no more force closes, it is fixed.
Added CPU Hotplug support from Speedmod kernel (only 1 core when not in load as it's in Speedmod kernel, bettery battery life)
Disabled logcat and dmesg and unnecessary Samsung debugging (from Speedmod kenel) See 2nd post on how to enable logcat.
Added UV capability (Please use with caution as it is very risky to change the CPU voltages).
Increased Touchscreen sensitivity even when charging (Best touch response to date in Note ).
Added FSYNC Control 1 (from Ezekeel's GLaDOS kernel for Nexus). See 2nd post to see how to disable FSYNC (not recommended nor explained for noobs).
Tweak GPU, it is now : 100-114, 267, 400 MHz (3 steps, first step dynamic)
Added HYPER cpu governor.
Defaults are noop-ondemand now (noop-pegasusq is still recommended for balance)
Fix for wifi drain on standby (disabled all multicast).
Use GCC 4.6 for optimum performance.
Some minor changes...

**
c.o.h. Kernel Thread: http://forum.xda-developers.com/showthread.php?p=40765028


CM10.1 #NX Kernel - CHANGELOG:
**
Changelog for v1.2.0:
GPU Control Interface added
mDNIe Screen Control Interface
Removed Sound Control Interface and changes
Experimental: Allow higher charging currents. Default is good. Dont change if you are unsure.
Attempt fixing soft reboot. NXTweaks app is not open source, so in case of app FC or freeze.. Please reboot.
Reduced logging and ftrace_init removal
Many upstream fixes and tweaks
A test version using CM's New MALI libraries[/QUOTE]
**
NX Kernel Thread: http://forum.xda-developers.com/showthread.php?t=2192893

 

[AA1973]

TW>JB #c.o.h._Kernel - CHANGELOG:
**
Changelog 1.37 ---> 1.37b

New version with less aggressive GPU thresholds to be more battery friendly is uploaded in the op. All rest is the same as v1.3.7.

Enjoy...

**
c.o.h. Kernel Thread: http://forum.xda-developers.com/showthread.php?p=40765028


CM10.1 #NX Kernel - CHANGELOG:
Changelog for v1.2.1:

Recovery updated and little fixes
Init binaries GCC 4.6 compiled
Introduce new advanced "Cortex Brain" which gives dynamic tweaks on screen on/off
Introduce CRON Jobs for maintenance
Introduce extra Modules which can be loaded optionally on boot (EDS, XPAD, USBtoSerial, USBNet, etc)
NX Init.d Scripts removed and functionality coded into NXTweaks
Init.d scripts execution can be controlled
ZRam can be turned on/off or increased on-the-fly via NXTweaks
USB Mode - Mass Storage or MTP can be controlled by NXTweaks
Lots of new tweaks and customization[/QUOTE]
**
NX Kernel Thread: http://forum.xda-developers.com/showthread.php?t=2192893

 

[AA1973]

CM10.1 #NX Kernel - CHANGELOG:
Changelog forv1.2.2: [23/05]

Kernel Linux version upgraded to 3.0.79
Linaro Toolchain updated to GCC 4.7 2013.04
Experimental Tweak to increase touch sensitivity / smoothness (as requested, need feedback)
Fixes for wifi toggle delay
CortexBrain retuned
Added new experimental Ram-Clean on Screen off cortexbrain option
Fixed external module loading and added option to force load
Minor fixes
**
NX Kernel Thread: http://forum.xda-developers.com/showthread.php?t=2192893

 

[Formhault]

Hey AA, I have a suggestion. In the event that this is not taken well... *raises shields*

 

[AA1973]

For the moment being I enjoy my little "CC" - "Colonel Catalogue"
Just putting a one-liner like "NX Kernel has been updated to 1.2.2" is pretty useless in my eyes.
No need for discussing this further here in this thread.
Thanks

 

[AA1973]

CM10.1 #NX Kernel - CHANGELOG:
***
Changelog for v1.3.0 (exynos4):
NX-Kernel fully merged with and compiled from new Exynos4 Tree of codeworkx
Kernel Linux version upgraded to 3.0.80
Ramdisk: Fixes for WiFi toggle, Radio, Module Loading
Frandom is now compiled as module (More usage of this maybe exploited later)
Added missing Samsung J4FS module support to exynos4 merged tree
Replaced broken video driver of exynos4 tree with one from smdk4210
Entropy tweaked and tuned
WiFi wakelock disabled in Suspend mode
Tweaks for WiFi driver - Disable GAN_LITE_NAT_KEEPALIVE_FILTER and allow to change WIFI MAC address
New touchscreen kernel sensitivity tuning
Default touch screen sensitivity in NXTweaks is now 30 (Touch sensitivity is perfectly tuned now!)
Use journal writeback i/o tweak instead of ordered
Little OOM tuning for cortex brain
Minimum GPU voltage allowed 900mV
******

New version is v1.3.0 as we are switching base device tree.
It is uploaded and running better than ever.
Test out if all features that were working in previous versions are working here or not!

**
NX Kernel Thread: http://forum.xda-developers.com/showthread.php?t=2192893

******
Explanation of "exynos4" - Quoting codeworkx:
"This build comes with a new kernel which is based on our galaxy s3 / galaxy note 2 sourcetree.
The wifi driver is ported over from galaxy s4 sources and should fix the tethering issues."

Sources:
https://github.com/codeworkx/android_kernel_samsung_exynos4
http://review.cyanogenmod.org/38146
http://review.cyanogenmod.org/38147
http://review.cyanogenmod.org/38148
http://review.cyanogenmod.org/38149

Found here:
http://forum.xda-developers.com/showpost.php?p=41682716&postcount=13622