Thanks RealEngineer for the guide . Will post all details when successful love to help others.
[JIO STB] Guide to Enable ADB and Sideload apps on the updated version of JIO STB
- Thread starter RealEngineer
- Start date
Apps can only install before running system.img command, my usb is not detecting after 12th step we have to install apps in mi os and in that os usb is not able to detect kindly help if anyone know how to solve
Thank you RealEngineer I completed the process successfully..but I tried to uninstall Voot & some other apps but they keep installing themselves after few minutes and I did uninstall jio launcher and stuff through adb.
That is because of jio store you can uninstall/disable the jio store app. I haven't included it in the list as some people may need that.
After 3 days of trial and error finally things are working fine. Some recommendations from my side use good quality usb a to a cable, disable windows antivirus while working not sure but want to reduce interference from OS. My System.img was uploaded only 85% still everything is working fine.
Will my JioFiber subscriptions still be there? Also, can I rollback to original firmware?
Last edited:
Why do u want to go back to ****, just apply AC 220V supply from your mains to the DC power port at the back and fry your device out.
After this just call your Jio service care fellow and ask for replacement device. Use it for a day and cancel your subscription on the very next day. Jio won't be able to challenge you.
We the people of India need to stop this bullsh't which these big giants do and lock OUR devices. This has happened in all Countries who are leading us technologically by 30 Years like US, EU etc. There also these ISPs locked customer devices and this eventually led to electronic waste.
If Jio employees r reading this, pls learn from history and put your slightest contribution to keep our earth
beautiful.
If Jio employees r reading this, pls learn from history and put your slightest contribution to keep our earth
beautiful.
Though this contradicts my earlier reply, but statistically it's still positive enthalpy.We the people of India need to stop this bullsh't which these big giants do and lock OUR devices. This has happened in all Countries who are leading us technologically by 30 Years like US, EU etc. There also these ISPs locked customer devices and this eventually led to electronic waste.
If Jio employees r reading this, pls learn from history and put your slightest contribution to keep our earth
That's a genius idea TBHWhy do u want to go back to ****, just apply AC 220V supply from your mains to the DC power port at the back and fry your device out.
After this just call your Jio service care fellow and ask for replacement device. Use it for a day and cancel your subscription on the very next day. Jio won't be able to challenge you.
Attachments
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Please help.... I am getting this error "programm cannot start because libusb0.dll is missing from your computer." -
15Disclaimer :- We are not responsible for any type of damage,we are not responsible for literally anything, follow this guide at your own risk. This is only for educational purposes.
We need help from a developer for porting twrp and making the mi box firmware stable for the Jio STB, Anyone willing to help can DM. Thanks.
Follow the guide till the last step(19th step) for proper results, Don't stop somewhere in the middle
You need a PC, a usb male to male cable,any safety pin or sim ejector pin, and of course JIO STB
1)Download amlogic tools 5.5.0(Amlogic Tools). Install worldcup driver using AMLogic driver installer.exe.
2)Download system-aidan.img (Thanks to aidan for it, I have extracted it from his mi box port rom)
3)Download system.img of c200(if the model of your stb is c200),download d200 if the model of your stb is d200.
4)put the system-aidan.img in the amlogic tools/bin folder,put the system.img(Jio STB) also in the same folder.
5)Now disconnect the power plug of the box, and connect usb male to male cable from the box to the PC.
6)Open AMLBootloaderConsole.exe you will see a screen waiting for device.
7)press and hold the reset button of the box using a pin and simultaneously insert the power plug.
8)You should release the pin after connection is established(Windows will make a sound and you will also see a screen [email protected] in bootloader console).
9)Open a cmd in the bin folder of amlogic tools. (You can type the command 'update scan' to check if the device is connected or not.
10)Run the command
11)after it is success run,
and next
12)now remove usb cable, power plug and start the box normally and then complete the setup and don't forget to select skip at WIFI selection(otherwise device may get stuck there).
You can now install apps using file browser app by connecting pendrive, you can skip 13,14,15,19 steps If you don't need adb. (Don't forget to give unknown sources permission to apps like aptoide tv,File explorer etc.)
***OPTIONAL SECTION***(FOR ADB)
13)Now ensure that both pc and box are connected to same wifi and get the ipv4 address of the box(you will find it in about page of settings).
14)Enable usb debugging and then connect to the box using adb by running the command
15)Install settings database editor app (SetEdit)
and give it write_secure_settings permission with adb.
ADB Command:-
***OPTIONAL SECTION END***
16)now turn off the stb and get back to that [email protected] that we got to using bootloader console in the start.(do the 5,6,7,8,9 steps again)
17)now run,
(this will install jio system again).
18)after it is success run,
and next
now reboot and enjoy the apps.
***OPTIONAL SECTION***(FOR ADB)
19)Now you can see in global settings page of settings database editor app, the property adb_enabled is set to 0, make it 1 for enabling adb.
***OPTIONAL SECTION END***
TIP :- Uninstalling apps like rcu ota,tr069 client,jio remote care,jio settings and some other jio apps with ADB can prevent the box from updating/getting reset automatically in the future.
Uninstalling jio ads push app, jio stb launcher can remove the ads on the box and don't forget to install another launcher(ATV,Leanback etc.) before uninstalling the jio launcher.
Open settings app(This) can be used for opening the original android settings.
ADB commands to remove the jio apps (including jio settings ,jio launcher)
Note :- We don't use mi box firmware because it is not stable and has serious bugs like video's don't play.
We need help from a developer for porting twrp and making the mi box firmware stable for the Jio STB, Anyone willing to help can DM. Thanks.
Credits :-
Srikant(srikantnagar) for finding out that our jio box(both d200 and c200) supports treble, which is the reason for knowing mi box system.img works for our box.
Aidan(aidanmacgregor) for his mi box port to other amlogic boxes(Here).
Nishant Sharma(nishant6577) for his assistance with testing, debugging etc.
My part was finding the method to flash recovery, custom firmware and extracting the stock firmware of the box.4
nvm i fixed it with adb command here is the command if anyone faces same issue:
adb shell setprop persist.sys.timezone "Asia/Kolkata"
This will set time to IST as well as other units such as Metric system.2Some tips - Disable apps like jio store so that it don't reinstall stupid shilpa app and only enable it to update apps once a while.
Disable JioAds Push to avoid those loud startup ads
Button Mapper is a handy app. It allow you to use those color buttons for something that you desire. I changed Tv button to youtube.
Things to remember - Commands goes in "command prompt" and not Amlogic bootloader console and remember to allow unknown sources permission for aptoide, youtube next etc.
I uninstalled almost all apps listed by OP except launcher and store but I still got update which didn't really change anything.2akshay.ku
k0chiro And others
Take a look at my post for gapps, persistent adb, and giving unknown sources permission with adb
[JIO STB] Guide to Enable ADB and Sideload apps on the updated version of JIO STB
Disclaimer :- We are not responsible for any...
forum.xda-developers.com
