Junsun V1 - Codes

[Joaquintcu]

I think you should open a new thread for your topic after you checked if you can find an existing one dealing the topic Junsun V1s Pro with MT8227L CPU.
Additionally you should provide a picture of the password prompt to make clear what you're taking about.

Perfect, I'll do that, thank you very much for everything

 

[iulianx2000]

Hello, although it was warned here at the beginning not to access code 9191, someone entered the code and even asked the question "If you access Code 9191, what is the solution to the problem" Now "Device No Activated" appears on the tablet display. Personally, I hadn't had time to read this warning and I didn't remember the access code 8878, so I put what came into my head. And yes, this very 9191 and 1515 (it was not listed in the table) I think because, as you can see in the photo, every time I turn on the device, those two options appear in Chinese. I used the translation and it says on the left "System Hint - No file was found - Try again", and on the right the option "Return". If I access the left option "System Hint" nothing happens. If the option on the Right is accessed, the device enters normal operation mode, but be careful, "Device No Activated" is permanently displayed and from time to time the two Options appear again in Chinese. As Torsten also said, I think the device needs a certain file. He says this is called "file called license.dat" Now I ask once again: Has anyone else gone through the same problem? If so, can you explain or post the solution or better that missing file "File called license.dat"?

If someone used Code 9191 and got the red message on the screen "Device Is No Activation", maybe the post is useful.



- This is the code for my variant Jusun 8259 , V1Pro 4GB\64GB\WiFi .

- dmZERXpiS3BJMHBPUWs4PSMyMDIwMTEzMDEwMjQxNyM=##*10000

The Chinese technician asked me for a picture of the back of my device. Probably to make sure of the version I have. I posted the picture for those interested. I warn that the code should be written in Notepad format and the stick should be FAT32 formatted. I have also posted the film sent from China as well as the video I took unfortunately after the procedure. For me, things went more simply than what is seen in the Chinese one, that is, I proceeded exactly like this: After Fat32 formatting the stick and copying the code, with the device turned off, I inserted the memory stick into the USB 1 port, then I turned on the device, it opened (in my case) the loucher AGAMA and the window with options in Chinese appeared. I left it waiting without giving any command, and after 10-20 seconds another window appeared automatically with another inscription in Chinese, then the device turned off by itself and reopened and I found that I got rid of Device is No Activation. I want to point out that I have 4G with a SIM card, so the internet is permanent. In order for the procedure to succeed, you must have the device connected to the Internet, have a Hot Spot or Wifi. Otherwise, the procedure will not be successfully completed. I wish you patience and success.

 

[iulianx2000]

files

 

[iulianx2000]

In arhive is Licence DAT. Unzip and copy to a Fat 32 formatted stick.

 

[RP_12]

In arhive is Licence DAT. Unzip and copy to a Fat 32 formatted stick.

Thank you very much. It worked

 

[iulianx2000]

I'm glad you solved the problem.

 

[darkiron]

hi everyone, someone could give me the code for advanced network settings

 

[Wotaisalive]

Junsun V1 2GB+32GB - WIFI - CPU MT8227L - MCU: T3(L) // (NOT PRO, NO 4G)​

https://forum.xda-developers.com/t/...i-cpu-mt8227l-mcu-t3-l-not-pro-no-4g.4519201/

 

[aginko]

8877 na mojej jednotke Android otvorí denník atc.
Mám problém s nastavením ekvalizéra... pri každom novom spustení sa všetky nastavenia vrátia na predvolené hodnoty.
Mám ff_866x so 6gb ram a 128gb Rom.
Mohol by mi niekto pomôcť?
Ďakujem

Dobrý deň, skúste po nastavení ekvalizéra vytiahnuť všetky USB kľúče, potom vypnite kľúč zapaľovania, chvíľu počkajte a potom skontrolujte, či zostal v pamäti.

Mod translation: Hello, after setting the equalizer, try pulling out all the USB sticks, then turn off the ignition key, wait a while and then check if it remains in memory.

 

[TorstenH]

Dobrý deň, skúste po nastavení ekvalizéra vytiahnuť všetky USB kľúče, potom vypnite kľúč zapaľovania, chvíľu počkajte a potom skontrolujte, či zostal v pamäti.

It may help to write in English according to the forum rules.

 

[kiscsipas]

Szia! Vettem egy Junsun v1 fejegységet az autómhoz. De sajnos nem tudom beállítani a boot logót. A menüből kiválasztom a Ford emblémát. De indításkor nem jelenik meg. A rádió azonnal indul! Köszönöm a segítséget!!!

Mod translation: Hi! I bought a Junsun v1 head unit for my car. But unfortunately I can't set the boot logo. I select the Ford emblem from the menu. But it doesn't appear on startup. The radio starts immediately! Thanks for the help!!!

 

[Badger50]

@aginko & @kiscsipas

Please, a friendly reminder about XDA Rule #4:

4. Use the English language.

We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.

Thank you: Badger50

 

[kiscsipas]

Hi! I bought a Junsun v1 head unit for my car. But unfortunately I can't set the boot logo. I select the Ford emblem from the menu. But it doesn't detect it at startup. The radio will start immediately! Thanks for the help!!!

 

[didko84]

When turn on rear camera tap and hold and will open settings for rear camera.
Code 1111 and 0000 are settings for lines and for picture

 

[Robin1896HSV]

I dont have "settings" or "car infotainment" on my 1 Pro.
Can someone help me?

 

[Paulo Regalado]

Hello I nead help.
Is it possible to have junsun connected with ingnition off? My car is a Nissan qashqai 2015

 

[carmela67]

I have a question that helps me understand:
on my junsun v1, set code 8888 to enable autolink,
I noticed the RADIO IC flag, 3702, but I don't remember whether to set the flag in the DSP as well. and what would it be?
I attach a photo.
thank you

 

[TorstenH]

Ho un dubbio che mi aiuta a capire:
sul mio junsun v1, imposta il codice 8888 per abilitare il collegamento autolink,
Ho notato il flag RADIO IC, 3702, ma non ricordo se mettere il flag anche nel DSP. e cosa sarebbe?
Allego una foto.
grazie

According to the forum rules you have to write in English! If needed use an online translator.

 

[mammo7788]

Szia! Hogyan kapcsolhatom ki a kamera ikont a Junsun V1 fejegységen?

 

[iulianx2000]

in English please