You may want to post a small video so we understand at least the basics, e.g. if a reverse camera is installed.
Do you have a Junsun V1 pro or Junsun V1?
Do you have a MTK825X or MT8667 unit?
Additonally I don't think it's code related.
Junsun V1 - Codes
- Thread starter TorstenH
- Start date
Do you have a Junsun V1 pro or Junsun V1?
Do you have a MTK825X or MT8667 unit?
Additonally I don't think it's code related.
Good morning. i have v1 and i have this problem that bothers me. every time I put the ignition key off and the radio goes to sleep all the open apps installed for example mapps ... YouTube .. close and every time I have to set them up again such as Maps. Is it possible to set that it shouldn't close open apps?
Understand me ?
Understand me ?
Give it a try if you have a MTK825X based device
JunsunSleepConfigurator
JunsunSleepConfigurator On Junsun V1 (pro) devices apps get killed before head unit enters sleep mode. So you have to restart the apps every time you continue your ride. The file /vendor/etc/qb_list.xml defines which apps should be just...
forum.xda-developers.com
HIGive it a try if you have a MTK825X based device
JunsunSleepConfigurator
JunsunSleepConfigurator On Junsun V1 (pro) devices apps get killed before head unit enters sleep mode. So you have to restart the apps every time you continue your ride. The file /vendor/etc/qb_list.xml defines which apps should be just...
Thanks for the reply. I tried but it doesn't solve anything.
only system apps remain open. I think I should disable accelerator apps, I think that every time I start them, they are closed as if I did it manually. Does it only happen to me or to others too?
If you have a MTK825X device you can disable Duraspeed. AppSwitcher has an option to do that.
[Discontinued] AppSwitcher - smart SWC launcher (for Junsun, Xtrons and similar devices) incl. autostart
AppSwitcher SWC (Steering Wheel Control) app launcher This thread gets continued here Stay focused on the street and don't touch the head units display to switch between apps. Support the development of this free app via...
forum.xda-developers.com
GrazieSe hai un dispositivo MTK825X puoi disabilitare Duraspeed. AppSwitcher ha un'opzione per farlo.
[Discontinued] AppSwitcher - smart SWC launcher (for Junsun, Xtrons and similar devices) incl. autostart
AppSwitcher SWC (Steering Wheel Control) app launcher This thread gets continued here Stay focused on the street and don't touch the head units display to switch between apps. Support the development of this free app via...
tnk now i try
my real problem is that i use google maps very often and every time i make a stop, even a small one, when i leave i find maps closed and the destination cancelled. I always have to set up again. unfortunately I have to make several stops and it creates problems for me. I'm thinking of connecting the yellow wire and the red wire always connected to the battery so that it doesn't turn off anymore.
I'm also willing to change units, do you know if there is a similar unit that doesn't have this problem?
Last edited:
The first question is, if sleep mode works for 3rd party apps on your head unit. E.g. you could try the following way:
- install AppSwitcher and do the basic configuration by selecting some apps so you can start it via the AppSwitcher logo on top of the config menu and see the notification in status bar
- put AppSwitcher on the white list with JunsunSleepConfigurator.
- Reboot the head unit and start AppSwitcher
- Turn off ignition and turn it on. If the AppSwitcher icon is directly visible and you see the message "Wake up AppSwitcher" sleep mode works for 3rd party apps.
Tried my suggestions regarding Duraspeed and initial test of sleep mode with AppSwitcher?
Hello friends! I have a Jansun V1 head unit based on Allwinner quad-core t3 p1, 2/32 gb on Android 11
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
Last edited:
Hi All. I have just received my Junsun V1Pro 6G. In the New UI, menu system how can I step in to the developer menu. I find such menu (elsewhere compared to the videos) but I do not know the code, the ones written here does not work.
My problem is that my reverse camera gives no pics. It is in PAL and it turnes on in reverse bit only black.
My problem is that my reverse camera gives no pics. It is in PAL and it turnes on in reverse bit only black.
I don't know the correct one for your car, but these options have a relation TO BMW:
42, 85, 138, 163, 176, 274, 277, 309, 326, 333
The option 274 worked for my e46. You will have to trial and error what works for you.
42, 85, 138, 163, 176, 274, 277, 309, 326, 333
The option 274 worked for my e46. You will have to trial and error what works for you.
Hello all, I just bought a Junsun v1 pro to upgrade from my old 2016 Wiki s160 android HU. Withe the old HU I had a rear camera CVBS fitted whick looked fine. Now on the V1 pro the image looks cropped zoomed. I can only see the lower part of the image. Is there a way to change the resolution and use the full camera sensor? Thanks!
I have the same problem and this code is not working with my unit and i can't contact the seller....any ideas what can I do
Extract the attached archive and put it on an USB drive.I have the same problem and this code is not working with my unit and i can't contact the seller....any ideas what can I do
I re-downloaded the file and I was able to extract it without issues. Please try on another device or use another tool to extract the archive.
Md5 checksum of the zip file is
d2fda9e42438b674d11b5684997fa838
It says activation code doesn't match
Attachments
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
111
-
3Code description from {Mod edit}
Please note: Don't just try a code without to know what happens. E.g. 9191 will lead to the message "device not activated" and you need a file called license.dat.
8888 - restricted settings menu
8878 - full settings menu. Mostly what you're looking for.
Additional info can be found here: https://forum.xda-developers.com/t/junsun-v1-factory-settings.4282295/
1111 - load monitoring
0 - update (mcuupdate_num)
1 - some menu (csudy_num)
2 - barcode
3 - another barcode 8938003992756585897
4 - reboot
5 - color setting
6 - set a new random Bluetooth name
7 -
8 - gis whitelist reset
9 - system notification: device activated (in Chinese)
0129 - CAN DATA
5555 - save settings
1912 - factory setup
1812 - shop setup
12345678 - update_apk update MainUI
3699 - update_apk2
5699 - update_apk3
7788 - atc_log (engineering menu of the 4G modem)
8877 - atc_factory
Menu for changing the cutoff (filter) frequencies for the sub and line outputs (relevant for those who use external amplification):
Code 8877 ---> Audio ---> Scroll to Sound Effect ---> Bass (or Alto (Middle), Treble).
And also there is a setting and the ability to completely disable Loudness.
USB mode can be changed here if required, too.
7758258 - obligatory mode !! do not enter !!! Complete crap going on
5678 - changing the menu code logo
3234 - apk_install_pwd
Alternatively (untested!) restore the engineering menu settings to the factory settings.
2134 - appinfo_id_num
6666 - install_id_num
7777 - install2_id_num
1616 - display_id_num brightness
2064 - testmode_id_num
1414 - reboot_id_num
9191 - destroy_id_root_num
9090 - destroy_id_num
1313 - radio_reset_num
1101 - screenshot_num
4321 - filedelete_num
1234 - filecopy_num
Boot logos for code 5678: here
Instruction to change logo: here222
If someone used Code 9191 and got the red message on the screen "Device Is No Activation", maybe the post is useful.
- This is the code for my variant Jusun 8259 , V1Pro 4GB\64GB\WiFi .
- dmZERXpiS3BJMHBPUWs4PSMyMDIwMTEzMDEwMjQxNyM=##*10000
The Chinese technician asked me for a picture of the back of my device. Probably to make sure of the version I have. I posted the picture for those interested. I warn that the code should be written in Notepad format and the stick should be FAT32 formatted. I have also posted the film sent from China as well as the video I took unfortunately after the procedure. For me, things went more simply than what is seen in the Chinese one, that is, I proceeded exactly like this: After Fat32 formatting the stick and copying the code, with the device turned off, I inserted the memory stick into the USB 1 port, then I turned on the device, it opened (in my case) the loucher AGAMA and the window with options in Chinese appeared. I left it waiting without giving any command, and after 10-20 seconds another window appeared automatically with another inscription in Chinese, then the device turned off by itself and reopened and I found that I got rid of Device is No Activation. I want to point out that I have 4G with a SIM card, so the internet is permanent. In order for the procedure to succeed, you must have the device connected to the Internet, have a Hot Spot or Wifi. Otherwise, the procedure will not be successfully completed. I wish you patience and success.
