Junsun V1 PRO 2GB+32GB UI3 Firmware

[Mad Mack]

Many Thanks djjoan01 for sharing. Works perfectly on my Head Unit.

 

[tihodimitrov]

Hello, today I was digging in the settings vein, it is entered with code 8888, and I changed some settings and the media stopped keeping the settings after I turned off the car and it stood for about 3-4 hours after starting, all settings are reset and the original view of the media appears, I do not remember the language in which it was set, the exchanged icons, does anyone have a picture of the original settings of this menu which opens with code 8888?This is the menu.

 

[IAmNotMe01]

Hello, today I was digging in the settings vein, it is entered with code 8888, and I changed some settings and the media stopped keeping the settings after I turned off the car and it stood for about 3-4 hours after starting, all settings are reset and the original view of the media appears, I do not remember the language in which it was set, the exchanged icons, does anyone have a picture of the original settings of this menu which opens with code 8888?This is the menu.

check last memory to Remember and save than reboot

 

[tihodimitrov]

check last memory to Remember and save than reboot

Thank you very much!

 

[tihodimitrov]

check last memory to Remember and save than reboot

Today I made the changes as you wrote, the problem is that when I press the "save" button and restart the media, then I go again to check the setup menu, again the check mark is on the last memory of unremember, I repeated the procedure several times, but each time does not save the new setting. Any ideas?

 

[Rydyn]

Many Thanks djjoan01 for sharing. Works perfectly on my Head Unit.

Mad Mack,
Do you have the V1 (non-Pro) or the V1 Pro? Thanks!

 

[Mad Mack]

Mad Mack,
Do you have the V1 (non-Pro) or the V1 Pro? Thanks!

Normal V1

 

[vendo232]

it would be great if we can get Junsun`s repository to latest and greatest FW when they publish new one.

Push instead of Pull it from them all the time.

 

[Mad Mack]

Yeah,that would be great.
But Junsun will only give the Firmware to you if you request it from them ,they dont publish unless you ask for it.
I agree,they should have a downloads page.

 

[vendo232]

I`m a new owner, so apology for many questions. I noticed that pin 60 on the back is dedicated to WIFI antenna. I can not find after market antenna on aliexpress with such a pin.

My Junsun has very weak WIFI reception. I have AP in garage. when parking in front ot garage e.g. 5m from AP I can`t connect.

Has anyone managed / improved WIFI reception using external antenna?

btw: I installed FM antenna on windshield + GPS and it works very well now. Radio reception is basically better than original car one.

 

[Mad Mack]

I`m a new owner, so apology for many questions. I noticed that pin 60 on the back is dedicated to WIFI antenna. I can not find after market antenna on aliexpress with such a pin.

My Junsun has very weak WIFI reception. I have AP in garage. when parking in front ot garage e.g. 5m from AP I can`t connect.

Has anyone managed / improved WIFI reception using external antenna?

btw: I installed FM antenna on windshield + GPS and it works very well now. Radio reception is basically better than original car one.

View attachment 5532847

Hi Vendo ,hope firmware flash went Ok.
As far a Wifi Antenna ,mines weak too ,i just live with it ,keep my phone close to Unit.

 

[vendo232]

Hi Vendo ,hope firmware flash went Ok.
As far a Wifi Antenna ,mines weak too ,i just live with it ,keep my phone close to Unit.

@Mad Mack have you tried USB WIFI dongle? I have few will try them out, might be a quick fix.

 

[Mad Mack]

@Mad Mack have you tried USB WIFI dongle? I have few will try them out, might be a quick fix.

Not tried one.

 

[david74000]

Here's the November update. ui 3.0 november

Hello, I'm new here, I have a question, I can take this update ?
A lot of difficulty a found and witson its very long to answer....
I have a witson with this mcu and cpu :
Thank

 

[FORZA/ITALIA]

My model is ZQ8003, ZQMTK8007.
I wonder if it can be updated
If not. Does anyone here know what version it can update

 

[Tuiranac]

Hello, I'm new here, I have a question, I can take this update ?
A lot of difficulty a found and witson its very long to answer....
I have a witson with this mcu and cpu :
Thank

Yes, you can

 

[david74000]

thank you, I just got the answer from witson he tells me this:
2+16G does not support.
Different UI design only for 2+32G and above versions.
is this true or is it because they don't want to share for the previous version?

 

[Rydyn]

I`m a new owner, so apology for many questions. I noticed that pin 60 on the back is dedicated to WIFI antenna. I can not find after market antenna on aliexpress with such a pin.

My Junsun has very weak WIFI reception. I have AP in garage. when parking in front ot garage e.g. 5m from AP I can`t connect.

Has anyone managed / improved WIFI reception using external antenna?

btw: I installed FM antenna on windshield + GPS and it works very well now. Radio reception is basically better than original car one.

The WiFi and BT antennae are just the two wires on the Camera Video dongle. Make sure that you have that plugged in (and haven't cut those little wire stubs) even if you aren't using the Camera input.

 

[silva_acc]

Hello i have one junsu radio too...
Quad core , 2gb ram, 32 gb rom.
I was trieing to install a 3rd party launcher but when i do some apps dont show up like radio and etc..
Can you help me ?

 

[TorstenH]

Hello i have one junsu radio too...
Quad core , 2gb ram, 32 gb rom.
I was trieing to install a 3rd party launcher but when i do some apps dont show up like radio and etc..
Can you help me ?

Junsun V1 - start equalizer/AUX/BT music/... from launcher

The app equalizer.apk starts the equalizer (activity com.ts.main.Media.ADASMainActivity): EqualizerShell.apk starts the equalizer (activity com.ts.MainUI/com.ts.set.dsp.SetDspMainActivity) via su shell command. See post below for further...

forum.xda-developers.com

Watch not only the first message of the thread.