Can you send a Screenshot of the selection availeble. If it is similar to for example a ts10 there is no special selection for the 207. In my 207 i had to select Other(No AC) for it to work. It should be number 127. Regarding the fitting, what did they send you (out of pure curiosity, i have a junsun and my mothers 207cc has a topway unit, even tough the mounts look identical the junsun one is utter crap).
I'll try to help if i can.
Greets from Germany
Hi mate,
I saw some video in youtube where a guy selected 207 and works like charm, I will try that and if not I will go with Other(no AC) as you tell me:
About the fitting there are some pics, to be honest is embarrasing:
The one in the video should work fine too. Interesting that the car choosing between the 2+32 and the 4+64 is that different. However I allways had better luck with the System the 2+32 uses (Topway headunits work the same way, and there are even updates from time to time). My mount looks identical, but your cutout seems to be bigger. However it should latch in on the side of your front window. but i can be really tricky to get all the wires in the right position, especially the quadlock one. To get it to fit correctly you should make sure that the removable air vent unit is seated correctly and there is no wire in the way (easier said then done, however longer wires seem to help here. The room in the 207 is not the best for this type of fitting.
hi people I also bought a junsun but my steering wheel controls do not work, everything else that goes via the CANbus does. I have an Opel insignia and the CANbus is 210 GM, Opel. anyone here with the same problem?
problem has been resolved. I left the old cable from the old radio in front of the ignition lock on the steering wheel. this caused the steering wheel controls to not work. Unfortunately I can't program them right now. they have the standard features
Also have a problem with CAN BUS configuration in Toyota
A/C control and Steering wheel control doesn't work well
After choosing correct CAN system (according to seller info) in factory options (8888 and 123456).
Temperature control is working but fan control and steering wheel is still a problem.
I noticed that in factory options everything seems fine but in device info the MCU still shows "LEXUS IS 2006"
When I changed CANBUS to “GENERAL” in device info it also change to “GENERAL” but any other CANBUS configuration appears in info as “Lexus IS”
Maybe there is some software problem, or wrong can system choice?
Anyone got a solution?
A/C control and Steering wheel control doesn't work well
After choosing correct CAN system (according to seller info) in factory options (8888 and 123456).
Temperature control is working but fan control and steering wheel is still a problem.
I noticed that in factory options everything seems fine but in device info the MCU still shows "LEXUS IS 2006"
When I changed CANBUS to “GENERAL” in device info it also change to “GENERAL” but any other CANBUS configuration appears in info as “Lexus IS”
Maybe there is some software problem, or wrong can system choice?
Anyone got a solution?
Attachments
Last edited:
Good evening, I have a renault captur everything works except the car's original park sensors. Is it possible to import new data from the car to the canbus?
resil.serviser mi ni zvezal can bus konektorja.resil sem sam.dela vse brez da bi kaj nastavljal.edino kar me moti je dolzina stand baya.samo 60 min max.lp tomas
Mod translation: I solved it. The repairman didn't connect the can bus connector. I solved it myself. It works without setting anything. The only thing that bothers me is the length of the stand bay. Only 60 min max. lp tomas
Mod translation: I solved it. The repairman didn't connect the can bus connector. I solved it myself. It works without setting anything. The only thing that bothers me is the length of the stand bay. Only 60 min max. lp tomas
Last edited by a moderator:
@T OMAS A friendly reminder about XDA Rule #4:
Your cooperation is greatly appreciated. Thank you.
-Regards: Badger50
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation is greatly appreciated. Thank you.
-Regards: Badger50
Hallo Leute ich habe einen opel astra k bj2017 und bei mir funktioniert die Lenkradsteuerung auch nicht. Kann mir einer helfen?
Mod translation: Hello guys, I have an opel astra k bj2017 and the steering wheel control doesn't work for me either. Can someone help me?
Mod translation: Hello guys, I have an opel astra k bj2017 and the steering wheel control doesn't work for me either. Can someone help me?
Last edited by a moderator:
Got a similar issue but rear camera not working and not detected... Could i solve this with some trick or canbus? got the v1 pro 8 gb 128
thanks and happy new year
thanks and happy new year
Hello, I have installed Junsun V1 PRO in my VW T5 Multivan (2009). Does anybody know correct CAN TYPE number? For now best is nr.2, but only wheel drive buttons are working. Other informations from CAN BUS (speed, rpm, ...) are not avaliable. If I insert something else (for example 1), after reboot appears screen with car in the middle and informations (not correct) around it and it cannot be changed to different screen. Thank you for help.
Hi, I'm a new member, I bought a unit from Xonrich for my BMW X5 F15. The problem is when I switch into original car menu, the sound from the unit stops. Also the steering wheel controls of the phone 
does not work when I use the android interface. It seems to be a problem with the factory setting for this model.. Thanks
does not work when I use the android interface. It seems to be a problem with the factory setting for this model.. ThanksSimilar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
the problem was solved by updating the system.
Now I can select the car type and the steering wheel buttons work!
-
1
Issue resolved. Speaker inputs needed to be reversed. Thanks for the help!!1
Hello bro! I have the same problem with my Mini Cooper
I have problem to set the Can Type N 65, how can i solve please? Is impossible to set the right CANbus, and when set another Mini Canbus protocol, dosen't work! Please how can help me?
Thank's to all!1
As I am aware:
Android 10 versions are V20 - V31 - most current
Android 11 versions are V1 - V3 - which is most current
it has something to do with installed API level more than with actual Android version, I highly doubt any of those firmwares are 10 or 11 based on the settings UI it is more like 8.1....
You can safely install any of the firmware marked as 8259 as this describes your porcesor...1
