Junsun v1 pro 8/128 360 camera

[k0k1t0]

Hello friends!
Did you managed to run 360 camera on Junsun V1 Pro 8gb/128gb 8667. The unit has 12pin connector, but when I choose cam type 360 the unit shows message "No Device ! Unsupport 360 view ! " and if I start the 360 view app it starts to loop the starting screen of the app.

My question is: Can the unit run 360 camera and did someone managed to run it?

 

[Makitaxgt]

Hi , I am having the same issue . I connected the 8 pin 360 harness to Junsun VI pro 64gb and no luck.

Did you get this fixed? Or find solution ?

There is also a video on YouTube on this issue.

 

[k0k1t0]

I get the same error as in the video when I choose these settings. I don’t have 360 camera set to connect in the 12pin connector to see if the error goes away when the cameras are connected. That’s why I asked this question because I don’t want to buy the camera set just to find out it doesn’t work.

 

[Makitaxgt]

I got the 12 pin plug connected and it’s still not working .

I am not sure if I have to connect the 360
Camera( orange/ white colour wires in back cables) plug in.

4 things I can see why it’s not working
1. Wrong camera type
2. There must be a wire we are not connecting or
3. There must be a setting we are not selection or
4. This head unit doesn’t come with the 360 view processor chip

 

[k0k1t0]

I got the 12 pin plug connected and it’s still not working .

I am not sure if I have to connect the 360
Camera( orange/ white colour wires in back cables) plug in.

4 things I can see why it’s not working
1. Wrong camera type
2. There must be a wire we are not connecting or
3. There must be a setting we are not selection or
4. This head unit doesn’t come with the 360 view processor chip

I think it's the 4th, it doesn't come with 360 view processor and that's why it is throwing the error No Device... Maybe I'll go with the back only camera option.

If you have the 360 camera set, you can try to connect all cameras as it is written in the camera diagram and see if it works. If you try it, please post the answer.