Thanks but this firmware is not the
hi, this one seems not to be the one you referred as
“8259P_宝马UI02v1920x720-国外_v64_20220516
I received this software from the seller”
Thanks but this firmware is not the
hi, this one seems not to be the one you referred as
Hi ozgursenol, how can I help. I think that you should enter in engineering mode by typing 8878 and then go to can settings. In that menu you have ti choose your MB model. I think this will help. Give it a try
Which one should I choose from this menu and how should I proceed?Hi ozgursenol, how can I help. I think that you should enter in engineering mode by typing 8878 and then go to can settings. In that menu you have ti choose your MB model. I think this will help. Give it a try
Choose CAN type, then click on All, you will find your car model associated with a number. After this check it and it will require reboot. After this you should play with the other tab which is RADIO. There you should try the type of radio depending on which area are you. Each time you select it will require reboot…if it is chosen correct you will hear you car radio station in all your radio system.. hope you understoodWhich one should I choose from this menu and how should I proceed?
my problem is throwing i can't login to installed apps. what you said is already workingChoose CAN type, then click on All, you will find your car model associated with a number. After this check it and it will require reboot. After this you should play with the other tab which is RADIO. There you should try the type of radio depending on which area are you. Each time you select it will require reboot…if it is chosen correct you will hear you car radio station in all your radio system.. hope you understood
Can you share the firmware pls if you got it from the seller?my problem is throwing i can't login to installed apps. what you said is already working
I understand what you are saying but I don't have any installation files I wanted to ask if anyone has an installation file for this deviceI meant the zip file so I install on my car to see what happens. Nevertheles check on RSNav wiki they mention smth like this when they do a firmware update
contact the seller, they'll have the right firmware fileHi everyone,
yesterday I did the firmware upgrade of my head unit on my BMW but I lost the graphic interface of the producer.
I tried to recover the previous firmware but i don't remember what version was. Can anyone help me please?
I extracted the APK from the latest firmware. I have no idea if it will work or not.Hi there, by mistake I removed the Autolink app. I can't find it in the Playstore. Has anyone an idea where I can download the latest APK file? And does anyone know how I can reboot the radio as there is no option available?
All the best
Basically your head unit is a Mtk825X unit and this would be the right thread.Hello
Can someone confirm me if im in right thread for my unit im looking for latest update with bmw UI
Unit is for e60 CCC 10.25” seller is not answering or if he answer then is total stupid
Here are some pictures of unit
In description from seller is
10.25”
MTK 8259
1024x480
But i dont think it is true what seller says on their Page
See here
Yes, in your case orange is REV (reverse detection input).Thank you a lot for replyng. Kust want to double check. Is that the orange color, third from lefthand side(as the ground I suppose is the big black one) wire from the pocture, don't want to mess something up.
Don't worry about the Android folder. I think your USB pen format is NTFS! Please, format with FAT32 filesystem and repeat the update!Hi
I'm trying to update my MTK8257 firmware from V63 to V107 (8259P_军灿UI02v1280x720-国外_v107_20230919) (because im insure if V113 has been already tested)
Then, when I put my USB Pen into the head unit, it prompts the Update popup, reboots with green "success" and below in red "Failed. Check usb and files"
I come back to my pc, Windows says my usb has a problem and to fix it, and when I open it up, it has the "Android" folder inside.
Could this be the reason why I'm unable to update?
Last time I updated, it was summer last year and I don't remember if the head unit was creating the folders and all that.
It was with this same pen drive, and everything went smooth back in the day.
If it helps troubleshooting, I have 2 explorer apps installed (in case they're messing with sth)
Any idea how to fix this? Thanks
Hi guys, I need a little help. I've bought arear cam, and connect to the Junsun V1 Pro, and also ocnnected the wire that gives signal to the radio to turn on the video app. But nothing happens. Did you experience something simillar? Is there any option that needs to be enabled in gidden settings? Thanks.
Thank you so muchIn this case you could also try another launcher like Agama. At least if the Junsun launcher doesn't provide a functionality you don't want to miss.
If I remember, you was reset the settings. You should set the CAN settings in the FACTORY menu (select your car!)the 1st works perfectly and looks amazing the interface, plus its the right resolution, still cant see the cars original menu luckily I have diagnose and don't bother me very much. Millions of thanks keep being awsome!!
I extracted the APK from the latest firmware. I have no idea if it will work or not.Hi there, by mistake I removed the Autolink app. I can't find it in the Playstore. Has anyone an idea where I can download the latest APK file? And does anyone know how I can reboot the radio as there is no option available?
All the best