Kali Nethunter for d2att

[dank101]

Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, catches fire, you get fired because the alarm failed, and global thermonuclear war

Kali Nethunter ported to the Samsung Galaxy S3​

REQUIREMENTS:
A Samsung Galaxy S3 USA CURRENTLY RUNNING CM11 failure to have this will result in a brick and possibly even a HARD BRICK
A functioning brain
A working recovery
Basic instruction following skills

STEPS:
Download the two zips and copy them to your phone
Link for file 1: https://drive.google.com/open?id=0B5BIHhwzM7wWdDhnbW9xR0E3d2M
Line for file 2: https://drive.google.com/file/d/0B5BIHhwzM7wWSDA5MmZmMjN1TFE/view?usp=sharing
Reboot into recovery
Flash the zips in either order.
Reboot the device and set up, setup however is NOT finished.
Download: https://drive.google.com/file/d/0B5BIHhwzM7wWaHJrUzByb20yWVk/view?usp=sharing and put it on your SDCARD
You now have 2 choices:
ADB METHOD:

1. run adb root
2. run adb shell mount -o remount,rw /system
3. run sh fixkaliterm.sh

MOBILE TERMINAL METHOD:

1. run su
2. accept the superuser prompt.
3. run mount -o remount,rw /system
4. run fixkaliterm.sh

The last part is to fix permissions and fix a strange CyanogenMod "feature" that breaks mobileterminal.

Use make kali_defconfig to make the Kali Kernel correctly if compiling

Please post flash time and results below, this should work on ALL d2 devices under the d2lte label CM uses.


XDA:DevDB Information
Kali Nethunter for d2lte , ROM for the AT&T Samsung Galaxy S III

Contributors
dank101
Source Code: https://bitbucket.org/dank101/android_kernel_samsung_d2_kali

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CM11
Based On: CyanogenMod

Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-06-09

Created 2015-06-10
Last Updated 2015-07-08

 

[linxcaesar]

First link down, please check

Awesome was hoping someone would port nethunter to our sgs3.
Kali is running without problems but am curious about this features.

Pls fix the first link and ill get right away to test it. Thx

 

[dank101]

Awesome was hoping someone would port nethunter to our sgs3.
Kali is running without problems but am curious about this features.

Pls fix the first link and ill get right away to test it. Thx

Fixed.

 

[linxcaesar]

Downloading atm will let you know how it worked out.

Sent from my GT-I9300 using Tapatalk

 

[linxcaesar]

Hmm the rom part flashes without issues but kernel fails with an error. Just realised this is for the lte version, so its my fault for not reading carefully. Any chance for a modified kernel for the I9300 SGS3 International? If needed ill pull out the logs with the exact error but I think you might already know what the issue could be.

Sent from my GT-I9300 using Tapatalk

---------- Post added at 03:25 PM ---------- Previous post was at 03:21 PM ----------

Btw the flash time for the rom was under 10min

Sent from my GT-I9300 using Tapatalk

 

[metalfangs]

When running fixkaliterm.sh I'm getting thrown a few errors. Am I missing something?

 

[dank101]

When running fixkaliterm.sh I'm getting thrown a few errors. Am I missing something?

Try as SU.

 

[dank101]

Hmm the rom part flashes without issues but kernel fails with an error. Just realised this is for the lte version, so its my fault for not reading carefully. Any chance for a modified kernel for the I9300 SGS3 International? If needed ill pull out the logs with the exact error but I think you might already know what the issue could be.

Sent from my GT-I9300 using Tapatalk

---------- Post added at 03:25 PM ---------- Previous post was at 03:21 PM ----------

Btw the flash time for the rom was under 10min

Sent from my GT-I9300 using Tapatalk

Maybe.

 

[metalfangs]

Clean flash followed the steps but selecting any option in Kali launcher just opens a terminal window that displays this

 

[dank101]

Clean flash followed the steps but selecting any option in Kali launcher just opens a terminal window that displays this

You didn't read the entire thread.

 

[metalfangs]

You didn't read the entire thread.

Actually I did. As stated in my post above I followed the steps directly. Multiple times all yield same results.

 

[dank101]

Actually I did. As stated in my post above I followed the steps directly. Multiple times all yield same results.

The SH file fixes it, run with su -c.

 

[rjhingoor]

Android Terminal Commands

MOBILE TERMINAL METHOD:
run su
accept the superuser prompt.
run mount -o remount,rw /system
run fixkaliterm.sh

Do I just enter these commands verbatim? I know to run su you simply type su, but what about the other two commands? Any help would be nice, not that familiar with terminal on droid. Regardless I am currently working towards getting this to run, I still have to put cm11 on and install the other zips as well. Hopefully I can figure out the terminal stuff.

 

[WaydeUltima]

Followed the instructions to the letter, as far as I can tell, and I was getting the same errors with fixkaliterm.sh. Started over and noticed that when I try to install the first zip (kernel installs fine), it runs into an error "set_perm: some changes failed, E: Error in <filename>, (Status 7), Installation Aborted."

Not sure how to proceed at this point. Any ideas?

 

[dank101]

Followed the instructions to the letter, as far as I can tell, and I was getting the same errors with fixkaliterm.sh. Started over and noticed that when I try to install the first zip (kernel installs fine), it runs into an error "set_perm: some changes failed, E: Error in <filename>, (Status 7), Installation Aborted."

Not sure how to proceed at this point. Any ideas?

Development is halted. can't help you, I don't own a S3.

 

[Remoo]

Awesome!!

Will flash when I get home in a couple of hours, glad to see people still making things for the GS3.

Sad to leave Lollipop but this is so worth it

Ill keep you updated

 

[WaydeUltima]

So I did some research, and what ultimately worked was switching my recovery from Clockworkmod to TWRP.

After that, flashed both zips without a hitch and the software works great. Thanks for the port!

Note: to anyone receiving the "not found" error (I haven't seen any in this thread but the threads for other S3 versions had a few), go back and try to flash the zip again, and make sure it doesn't fail the installation. It's easy to overlook if you aren't paying attention.

 

[Ansaribro]

Not Working ON Galaxy s3 LTE GT-I9305

 

[dank101]

Not Working ON Galaxy s3 LTE GT-I9305

Hence why this is in the AT&T section and note the I9300/I9305 section.

 

[nlw93]

I'm excited to try this, but the first link give me a 404 error.