[KANG][ROM] Cherry Picks Un-official CM-7.2.0-RC0 Builds for Defy and Defy+

[woonaval]

I see that all the releases (yesterday, today...) are exactly the same size (99,44mb). Could it be that there haven't been any change on them, but still they are automatically generated? (sorry if it's a dumb question).

 

[plusplusplus]

Flashed this over the latest quarx build of cm9.

Working perfectly, fastest rom i've had so far & battery life seems good.

 

[nameite]

Flashed this over the latest quarx build of cm9.

Working perfectly, fastest rom i've had so far & battery life seems good.

I just flashed quarx's new CM7 rom over the Kang version.

The difference I found so far:
Quarx's version: better 3D (higher quadrant score 300+), smoother video recording, different boot animation, everything else the same

Kang: lockscreen home button activates flashlight(love this feature), seems like better battery life but could be due to my usage.

Stability-wise they are the same, no hanging or freezing etc.

 

[erpato]

I can´t donwload

 

[BlackBurn85]

I can´t donwload

just open link in new tab.

 

[Eramix3]

where is the build for Defy+

 

[blackwing182]

where is the build for Defy+

in the link, just download the one for defy (jordan) the build is made for the 2 defys and defy plus

 

[Viralata]

I dont get it, will this work with kernel 2.6 or not ? Only 2.2 ?

 

[uriel_zo]

post caps please

 

[blackwing182]

post caps please

dont need to upload screenshoots thy look exactly like cyanogenmod

 

[blackwing182]

Hey Blackwing,

how about battery and camera on defy+ with your builds? Is this fully working, I mean charging to 100% and camera not upside down?
If not, please add this as a known issue to your first post ....

boba

well i dont own a defy ATM, and this are not my builds, they are cangs from cm7, apparently they charge to 100% and camera works flawles! make a nandroid and try it

 

[LeopardSurd]

well i dont own a defy ATM, and this are not my builds, they are cangs from cm7, apparently they charge to 100% and camera works flawles! make a nandroid and try it

A confirmation would be great. Also, Defy+ users need some tutorial because of kernel. There are 3 kind of SBF for Defy: 2.3.4, 2.3.5 (CEE version) and 2.3.6.
Personally, I use the official 2.3.5 one and I want to go back to it with RDS Lite after flashing CM7.

By the way, have you seen the log?

NEW! cm : Prepare for 7.2.0-RC1

CM7 final is near!

 

[balika01]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GWK74
ro.build.display.id=GWK74
ro.build.version.incremental=20120130
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Mon Jan 30 01:33:17 JST 2012
ro.build.date.utc=0
ro.build.type=user
ro.build.user=fuzz
ro.build.host=fuzz
ro.build.tags=release-keys
ro.product.model=MB525
ro.product.brand=MOTO
ro.product.name=MB525_JOREM_U3
ro.product.device=umts_jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=umts_jordan
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=umts_jordan_emara-user 2.3.4 4.5.1-134_DFP-74 1313117579 release-keys
ro.build.fingerprint=MOTO/MB526_RTDACH/umts_jordan:2.3.4/4.5.1-134_DFP-74/1313117579:user/release-keys
ro.cm.device=jordan
# end build properties
#
# system.prop for jordan
#

rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-moto-umts-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-d /dev/ttyS0

ro.sf.lcd_density=240

# Default network type.
# 3 -> GSM/WCDMA (auto mode, according to PRL)
ro.telephony.default_network=3

# The interfaces to get DNS data from when using mobile data
# Comma-separated
mobiledata.interfaces=rmnet0,rmnet1,rmnet2,rmnet3,rmnet4,gannet0

wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 60

# Use TI hotspot code
wifi.hotspot.ti = 1

# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072

# Enable Jpeg HW decoder for images > 300 kb (disabled, buggy)
jpeg.libskiahw.decoder.enable=0
jpeg.libskiahw.decoder.thresh=300000

# Disable Jpeg HW encoder
jpeg.libskiahw.encoder.enable=0

# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=48m

# Forbid format of these partitions in mount menu :
ro.cwm.forbid_format=/misc,/devtree,/config,/boot,/recovery,/pds,/system

# LED charging indicator mode
# off = keep LED off during charging
# white = white LED for 'charging', green LED for 'charged'
# rgb = mixed yellowish LED for 'charging', green LED for 'charged'
persist.sys.charge_led=white

# Brightness scaling of the button backlight
persist.sys.button_brightness=100

# Tell UsbService that we're using Usb.apk
ro.usb.use_custom_service=1

# use 1% battery steps
ro.product.use_charge_counter=1

# use default multitouch configuration
persist.sys.multitouch=2

# Shutter sound enabled
persist.sys.camera-mute=0

# enable adbd during first boot (for dalvik cache problems)
persist.service.adb.enable=1


#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.media.capture.maxres=5m
ro.media.capture.flash=led
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.classification=classH
ro.media.capture.flip=horizontalandvertical
ro.com.google.locationfeatures=1
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=3000
ro.url.safetylegal=http://www.motorola.com/staticfiles/Support/legal/?model=MB525
ro.media.dec.jpeg.memcap=20000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-data-only=1
ro.vold.umsdirtyratio=20
keyguard.no_require_sim=true
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
persist.sys.themeId=Cyanbread
persist.sys.themePackageName=com.tmobile.theme.Cyanbread
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=CyanogenMod-7.2.0-RC0-Defy-KANG
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

this is the bulild.prop not the kernel... (gb / froyo)

 

[bone101]

the camers light very poor :-(
Other work great

Sent from my MB525 using XDA App

 

[ruphert]

update-cm-7.2.0-RC1-Defy-KANG-signed.02032012-1742.zip

* NEW! ADWLauncher : Added sortable apps list for catalog setup
* NEW! ADWLauncher : Added option to lock Action Buttons in main dock
* NEW! FM : Allow tuner to loop from upper back to lower and lower back to upper (frequency)
* NEW! Mms : Added a max SMS length option
* NEW! cm : Prepare for 7.2.0-RC1
* NEW! Added Ice Cream Sammich fonts

New ICS fonts are just awesome on Defy

 

[ahmedelhoseney]

nice build...working smoothly ...finally i decided to turn to it after stable CM 7.1.0
benchmark score was 2801 while the device full of running programs ..

 

[taruntyagi1981]

How to install this CM 7.2.0 RC0

Hi frenz
I am currently on WIUI 2.1.20.1 GB ver. Could anybody tell me how to install this CM7.2

Thanks

 

[premaca]

boot into stable recovery, wipe data/cache, wipe salvia cache, flash the zip and reboot. since both use group kennel we don't need to install kernel. if stuck in boot loop because of kernel mismatch just flash cm7 kennel. enjoy.

Sent from my MB526 using XDA App

 

[taruntyagi1981]

thx premaca. let me try .. if it works .. !!

Sent from my MB525 using XDA App

 

[taruntyagi1981]

by d way any idea which one is better rc0 or rc1
thanks

Sent from my MB525 using XDA App