Development [Kernel][02.07.2022][Android 12] Kirisakura 2.0.0 for Sony Xperia 1 III aka "Sagami"

Search This thread

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Kirisakura-Kernel for the Sony Xperia 1 III

Hello everyone,

To keep it short: Here is Kirisakura - Kernel for the Sony Xperia 1 III aka Sagami. Sagami is the internal codename for this years development platform of Sony Mark III devices. Please note this kernel is made to run only on Xperia 1 III.
I would appreciate if everybody that flashes the kernel, reads at least once through this opening post and the following ones.

Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
If you expect a custom kernel to magically improve your devices battery life manifold and this is your only priority then this might not be the right place for you.
However the kernel is built to keep battery life close to the same as you would experience the on stock kernel while being tuned to perform better in various UI related benchmarks. The same benches are used by google to verify and ensure UI smoothness on the Pixel devices.
There´s also a cpu-battery saver mode that cuts back the CPU max- freqs, but without the disadvantages like delayed notifications from built into the system user-space power-saving modes.
If that got your curious, I welcome you to continue reading if you´re still interested!

The kernel includes a lot of improvements and contributions from other developers as well. Without this kernel would not exist.
A big part of improvements originate from @arter97´s, @kdrag0n´s and @Sultanxda´s work. Many others contributed in some way or another to this kernel.
A big thanks to all of them at this place!

Now lets continue with a list of features in the next paragraph!


Main Features:
- Based on latest kernel sources from Sony for Android 12 and intended to be used on the latest Stock-Firmware
- compiled with Clang 14.0.7 and built with -O3 speed optimizations
- Linux-Stable-Upstream included to 5.4.202
- upstreamed CAF base for the Snapdragon 888 (qcoms internal codename "lahaina")
- CPU-Battery saver to be able to restrict max cpufreqs on the fly, without enabling powersaving modes that might cause missed notifications (more info here)
- include important fixes/improvements from kernel/common
- reduce power consumption during deep sleep
- remove logging while device is suspended
- disable various debugging mechanisms for drivers which are not needed on a perf build (e.g. binder)
- disable selinux auditing (we don´t have to adress selinux denials running a stock rom)
- disable unnecessary CPU errata for our specific SoC
- implement LRNG (thanks @arter97, see arter kernel OP for more info )
- Flashing the kernel will keep root!
- Flashable via EXKM, FKM or TWRP (if available) on a rooted system!


EAS related features:
- Implement dynamic WALT-Window size depending on current FPS, collecting information about CPU-Load to provide more precise information for the scheduler
- EAS implementation patched up to latest CAF state
- updates from kernel/common
- scheduler updates from sd888/ 5.4 kernel

CPU related features:
- Power saving workingqueues enabled by default (toggleable in EXKM)
- Change various drivers (WLAN, MM, audio, charger, power, thermal, glink etc) to use power efficient workingqueues. This compliments EAS in general
- improvements to cpufreq/times/stats
- vdso32 patches as found on Google Pixel devices (brief documentation here) (CAF 5.4 default, keep for documentation)
- remove event debug logging
- disable broken irq detection, disable debugmon
- improve suspend/resume from audio driver (caf-upstream for audio-kernel)
- cpuidle: wake only cpus for which qos has changed (this allows cores to keep idle states better)
- disable debugging during sleep states as per qcom recommendation
- remove RTB logging to reduce overhead
- disable trace_printk as it shouldn´t be used on production/perf kernel builds
- enable suspend_skip_sync to save power during suspend/resume
- disable edac and coresight (following google on the pixel kernels)
- disable jtagv8 debugging as recommended by qcom for perf builds to avoid potential power, performance and memory penalty
- disable s2idle in favor of deep idle state -> improves deep sleep drain (google initially used 2idle for improved suspend/resume latency on pixel 3 and pixel 4, but disabled it on pixel 5. qcom followed suit for sd 888, but apparently didn´t see google reverting it on pixel 5. Other OEMs such as Xiaomi or OnePlus already disabled s2idle on their SD888 devices in favor of deep- read more about s2idle vs deep here)

GPU related features:
- GPU driver updated to latest CAF-State
- gpu/kgsl improvements from pixel 4/pixel 5 kernel
- add low_prio_worker thread for gpu driver (Improves performance when tearing down processes (eg, via LMK) and not blocking currently running UI from submitting work to the GPU

File System related features:
- upstream BFQ-MQ to latest state in linux-mainline and default to 128KB readahead
- improve memory allocations in kernfs
- ufs improvements from pixel 4/ pixel 5 kernel
- improve GC as to not interfere while user interaction is happening and prevent possible jitter or latency spikes

Network related features:
- Wireguard Support (Details)
- advanced TCP algorithms enabled
- use bbr as default TCP congestion algorithm (fasted algo according to this excellent research from @kdrag0n found here )
- improved networking drivers from caf-upstream (especially wifi)
- remove unnecessary wakelock from WLAN driver to reduce thousands of very short wakeups during a 7 hour deep sleep period
- improved bluetooth performance (¹, ²)
- Enable support for TTL spoofing

Memory related features:
- Speculative Page Faults left enabled (1. 2) (CAF 5.4 default, keep for documentation)
- Fix various memory leaks in different subsystems
- improved mm with patches from mainline
- patches from kernel/common
- improve memory allocations in various subsystems, video encode/decode, kernfs, cgroup
- Backport to enable CONFIG_HAVE_MOVE_PMD (see here) , thanks @arter97
- Backport to enable CONFIG_HAVE_MOVE_PUD (commit here) , thanks @arter97
- free more RAM by removing unused reserved memory regions
- mm: Micro-optimize PID map reads for arm64 (improves game performance, especially unity based games such as genshin impact)
- MGLRU added (info here and here

Security related features:
- Control-Flow-Integration (CFI) and Link-Time-Optimization (LTO) (CAF 5.4 default, keep for documentation)
- Use ThinLTO which was first used in the Pixel 4 XL Android R-Kernel instead of full LTO (CAF 5.4 default, keep for documentation)
- Shadow Call Stack (SCS) Security-Feature ( 5.4 default, keep for documentation)
- enable init_on_alloc for even more security, more information can be found in the commit message (CAF 5.4 default, keep for documentation)


Misc Features:

Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
- blocking a kernel wakelock should only be done in case of firmware incompatabilities (WiFi network at work (can´t be changed) causes deep sleep to not work on the phone.) That´s the only use case I see for this feature. The kernel does not features this to improve battery life!

Other features:
- clean up asus drivers and fix a few warnings in kernel log
- disable logging and debugging to make the kernel more lightweight in various places (includes binder, mm, vma, gpu, ipa etc)
- fix several coding issues detected by newer Clang-Toolchains
- enlarge dmesg size to ease debugging


Flashing Guide, Download and Changelog

Requirements:
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
- magisk root
- a backup of stock boot.img or your magisk patched boot.img in case you want to go back to stock.

How to flash the Kernel:
1. Download the latest kernel.zip and make sure you have properly updated to the latest matching Firmware (check the feature list for the current firmware the source is based on). When there´s an OTA update for the Sony Xperia 1 III it takes Sony a while to release the source code for the new OS and me a while to build a new kernel. If you don´t want to face any issues, wait until I either release an updated kernel or give green light because there were no kernel changes.
If you want to be sure there are no issues, always make sure to run the firmware the kernel is built for!
If you feel adventurous and try in advance, make sure you have a backup ready!

2. Flash the kernel.zip via latest TWRP (if available), EXKM or FKM app and do a full reboot.

3. Reboot and profit.


DOWNLOAD:
Download is located always in this folder:

Important: Read after Download
Please take a look at the second post after flashing the kernel!

Changelog:

Android 11

1.0.0 Initial Release
1.0.1 https://forum.xda-developers.com/t/...xperia-1-iii-aka-sagami.4377449/post-86140929

Android 12
2.0.0

Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee/tea :)
If you like my work: http://paypal.me/freak07

Credits:
Sony for the development device, giving me the opportunity to create this project!
@osm0sis for all his work, including the ak3 installer!
@tbalden for being the best HTC, Pixel, OnePlus and now Asus wingman!
@LeeDroid and @mwilky for their awesome roms and work I used on multiple devices!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me in the past!
@arter97 for giving me advice
@kdrag0n for his help and advices!
@topjohnwu for magisk!


Source Code: https://github.com/freak07/Kirisakura_Sagami
 
Last edited:

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
F.A.Q:

Question:
Is root preserved when flashing this kernel?
Answer: Yes, the AnyKernel.zip will detect root and keep it.

Question: Safetynet does not pass on my phone since I unlocked the phone, why is this so?
Answer: Google introduced hardware backed attestation recently. Unfortunately the old kernel tricks to still get safetynet passing won´t work. Instead you will have to rely on some magisk modules. Short guide in post #4 below.

Question: How do I return back to stock or another kernel.
Answer: Extract boot.img from the matching firmware you are on (you can do so by using this tool or similar ones found on XDA and when googling around) and flash them via fastboot. If you want to keep root flash back the magisk_patched_boot.img. Or dirty flash your rom and re-root.

Question: Why is having Magisk installed mandatory for this kernel?
Answer: The kernel uses a ramdisk overlay to apply some settings after boot. If you are not rooted these settings will not get applied and you miss some of the optimizations.

Question: How to report bugs properly?
Answer: Have a look at post #3 in the linked thread. The linked guide is a pretty good starting point.
Before reporting any bug make sure you´re running on a stock configuration. That´s means you´re not using any mods, tweaks in kernel managers or other root tweaks , magisk modules, scripts or other modifications that alter various functions like sound mods, data traffic, sleeping behaviour, scheduler, magical battery tweaks etc.
Try to describe the issue as detailed as possible! Give your exact setup, like rom, magisk version, kernel version.
Is the issue reproducible? Does it happen frequently?
Provide logs, otherwise debugging is a lot harder. If you can already reproduce the issue and provide logs it greatly limits the amount of time I have to spent until I figure out how to reproduce it.

If the device force reboots/randomly reboots (that means you see the bootloader unlocked screen!) provide a .zip of /asdf.
Easiest way is immediately after booting up, with a root explorer navigate to /asdf. Copy the contents to your internal storage, zip it up and send it to me.

If the issue happens while the device is running provide a dmesg plus a logcat that you take while/shortly after the issue happens. This will log what´s running in the current session. Try to be as detailed as possible what´s happening when the issue appears. It will also help me in reading the log!
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Feature Documentation:
Here´s a brief documentation about some of the features included in the kernel that can be changed as the user desires.
They can be accessed via either terminal, scripts or for example EXKM manager ( tools -> user settings).

CPU-Frequency Limiting:
Another option is CPU-Freq Limiting. You can now limit the CPU frequency to a few different levels with a sysfs interface. Original implementation is from @tbalden, I only changed it to be accessible via traditional root methods.
Main Switch:
sys/module/cpufreq/parameters/batterysaver
Set this option to "1" to enable the feature

Max-Frequency Selection (Input boosts, such as scrolling boost or app launching boosts will still apply, if touch boost restriction is not set to 1)
sys/module/cpufreq/parameters/batterysaver_level
Set this to "1" to restrict the max CPU-Freqs to 1,7GHZ/2,1GHZ/2,49GHZ (Little Cluster/Big Cluster/Prime Core)
Set this to "2" to restrict the max CPU-Freqs to 1,6GHZ/1,7GHZ/2,0GHZ (Little Cluster/Big Cluster/Prime Core)
Set this to "3" to restrict the max CPU-Freqs to 1,49GHZ/1,4GHZ/1,6GHZ (Little Cluster/Big Cluster/Prime Core)

Touch-Boost Restriction
sys/module/cpufreq/parameters/batterysaver_touch limiting
Set this to "1" to restrict the powerhal from boosting over the limit defined in batterysaver_level
Set this to "0" to allow the powerhal to boost above the values defined in batterysaver_level, but only during interaction with the Phone!

Screenshots:
View attachment 5309899View attachment 5309901View attachment 5309903


This is for example very useful during gaming to prevent additional heat, if not the highest performance from the CPU is required. Check if the game is running fine on level 1 or 2, and you´ll notice much less heat. Powerdraw will be reduced as well.
Another very useful trick while doing video calls or long extended navigation sessions with google maps to preserve battery or keep the phone from heating. Especially during summer if the ambient temperatures are high.
This is a very easy way to preserve battery or reduce heat without toggling the battery save mode in settings as that restricts background data usage, which can lead to delayed notifications.
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
How to pass Safetynet after unlocking the bootloader

With the introduction of hardware backed safetynet attestation, passing safetynet has become a lot more complicated.
Some probably remember a while ago, flashing a kernel that forced some flags was enough to pass it. However these days are gone.
Below is a short guide how to pass safetynet on phones that are flagged to use HW attestation (such as the ROG 5).

1. Make sure you´re running latest magisk canary.
2. In Magisk Manager enable both zygisk and deny list.
4. Download the latest Universal Safety Net Fix from @kdrag0n ´s github for zygisk cand flash it in Magisk Manager. Reboot.
5. Profit
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Freak07,

I guess it should be "Please note this kernel is made to run only on Xperia 1 III" ;)

By the way, is there any plans to make same kernel for 5 III ?


Leads me to nowhere (404).
Fixed the typos and the link.

No, I only have the Xperia 1 III to work on.
 

treff89

Senior Member
Oct 31, 2006
87
28
Amazing work mate, very meticulous tuning. Would love to have this kernel on the 5 III. I understand the device architectures are quite similar?
 

dron39

Senior Member
Sep 20, 2009
722
110
Amazing work mate, very meticulous tuning. Would love to have this kernel on the 5 III. I understand the device architectures are quite similar?
I asked the same question above :)
And unfortunatelly Freak07 do not support 5 III because he doesn't have it. Hope someone else could transfer his patches and things to 5 III.
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Thanks for the kernel. However after installing the kernel my SD card gave an error. It says issue with the SD Card tap to fix and then asks me to format it?
I see. Thanks for the report!

I think i know whats up. They use a proprietary driver for exfat formatted sdcards ( I assume yours is formatted as exfat?) so it's not included in the source i build the kernel from.
I don't use a sdcard, that's why I missed it.
 
  • Like
Reactions: BlazingKahn35

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Amazing work mate, very meticulous tuning. Would love to have this kernel on the 5 III. I understand the device architectures are quite similar?
I asked the same question above :)
And unfortunatelly Freak07 do not support 5 III because he doesn't have it. Hope someone else could transfer his patches and things to 5 III.

They are similar, but I can't support a device i don't own. I also lack the time to do any remote debugging.

The phones however are similar as you mentioned, so if somebody is interested in starting to work on it all my work is up on GitHub. That might make it a lot easier than it would be otherwise.
 
I see. Thanks for the report!

I think i know whats up. They use a proprietary driver for exfat formatted sdcards ( I assume yours is formatted as exfat?) so it's not included in the source i build the kernel from.
I don't use a sdcard, that's why I missed it.

Yes mine is exfat since it's 256gb but not a big issue. I just transferred all my files to PC formatted the SD and transferred back now it works.
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Update to 1.0.1

Good morning everybody,

thanks to @BlazingKahn35 ´s report exfat formatted sdcards are now working fine again.
Included an open source driver, that spoofs texfat support (the proprietary exfat driver) once an exfat sdcard is detected.

Download link can be found in the OP.
 
Last edited:

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
Also I'm using forced 4K all the time. But the only downside is the slowing down of the FP sensor. I think it's a kernel panic can you look in to that also maybe? (It was also slow on stock kernel)
Not sure what you mean. A kernel panic crashes the device so that it reboots.

The fingerprint scanner works fine for me. I place my finger on it, it scans and proceeds to unlock. It's not the fastest around, but it's quick enough for me.

Also used the adb commands to enable 4k and the speed of the fingerprint sensor stayed the same on my end.
 
  • Like
Reactions: JDC2389
Not sure what you mean. A kernel panic crashes the device so that it reboots.

The fingerprint scanner works fine for me. I place my finger on it, it scans and proceeds to unlock. It's not the fastest around, but it's quick enough for me.

Also used the adb commands to enable 4k and the speed of the fingerprint sensor stayed the same on my end.
For me there is a big delay sometimes. Do you have AOD enabled?
 

Freak07

Recognized Developer / Recognized Contributor
Jan 2, 2011
5,740
19,137
I noticed just as I woke up that my phone was charged to 100%. Did you removed battery care from the kernel?
Not intentionally no. It might be not enabled the way I built the source or i need to see if the drivers is available somewhere else to be able to build it in.

I'll play around with it the next few days, see if I can reproduce the issue and find what's missing or broken. Thanks for the report again. (y)
For me there is a big delay sometimes. Do you have AOD enabled?
Not constant AOD. Only waking to AOD screen when lifting the phone is enabled.
 
  • Like
Reactions: BlazingKahn35

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    Kirisakura-Kernel for the Sony Xperia 1 III

    Hello everyone,

    To keep it short: Here is Kirisakura - Kernel for the Sony Xperia 1 III aka Sagami. Sagami is the internal codename for this years development platform of Sony Mark III devices. Please note this kernel is made to run only on Xperia 1 III.
    I would appreciate if everybody that flashes the kernel, reads at least once through this opening post and the following ones.

    Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
    If you expect a custom kernel to magically improve your devices battery life manifold and this is your only priority then this might not be the right place for you.
    However the kernel is built to keep battery life close to the same as you would experience the on stock kernel while being tuned to perform better in various UI related benchmarks. The same benches are used by google to verify and ensure UI smoothness on the Pixel devices.
    There´s also a cpu-battery saver mode that cuts back the CPU max- freqs, but without the disadvantages like delayed notifications from built into the system user-space power-saving modes.
    If that got your curious, I welcome you to continue reading if you´re still interested!

    The kernel includes a lot of improvements and contributions from other developers as well. Without this kernel would not exist.
    A big part of improvements originate from @arter97´s, @kdrag0n´s and @Sultanxda´s work. Many others contributed in some way or another to this kernel.
    A big thanks to all of them at this place!

    Now lets continue with a list of features in the next paragraph!


    Main Features:
    - Based on latest kernel sources from Sony for Android 12 and intended to be used on the latest Stock-Firmware
    - compiled with Clang 14.0.7 and built with -O3 speed optimizations
    - Linux-Stable-Upstream included to 5.4.202
    - upstreamed CAF base for the Snapdragon 888 (qcoms internal codename "lahaina")
    - CPU-Battery saver to be able to restrict max cpufreqs on the fly, without enabling powersaving modes that might cause missed notifications (more info here)
    - include important fixes/improvements from kernel/common
    - reduce power consumption during deep sleep
    - remove logging while device is suspended
    - disable various debugging mechanisms for drivers which are not needed on a perf build (e.g. binder)
    - disable selinux auditing (we don´t have to adress selinux denials running a stock rom)
    - disable unnecessary CPU errata for our specific SoC
    - implement LRNG (thanks @arter97, see arter kernel OP for more info )
    - Flashing the kernel will keep root!
    - Flashable via EXKM, FKM or TWRP (if available) on a rooted system!


    EAS related features:
    - Implement dynamic WALT-Window size depending on current FPS, collecting information about CPU-Load to provide more precise information for the scheduler
    - EAS implementation patched up to latest CAF state
    - updates from kernel/common
    - scheduler updates from sd888/ 5.4 kernel

    CPU related features:
    - Power saving workingqueues enabled by default (toggleable in EXKM)
    - Change various drivers (WLAN, MM, audio, charger, power, thermal, glink etc) to use power efficient workingqueues. This compliments EAS in general
    - improvements to cpufreq/times/stats
    - vdso32 patches as found on Google Pixel devices (brief documentation here) (CAF 5.4 default, keep for documentation)
    - remove event debug logging
    - disable broken irq detection, disable debugmon
    - improve suspend/resume from audio driver (caf-upstream for audio-kernel)
    - cpuidle: wake only cpus for which qos has changed (this allows cores to keep idle states better)
    - disable debugging during sleep states as per qcom recommendation
    - remove RTB logging to reduce overhead
    - disable trace_printk as it shouldn´t be used on production/perf kernel builds
    - enable suspend_skip_sync to save power during suspend/resume
    - disable edac and coresight (following google on the pixel kernels)
    - disable jtagv8 debugging as recommended by qcom for perf builds to avoid potential power, performance and memory penalty
    - disable s2idle in favor of deep idle state -> improves deep sleep drain (google initially used 2idle for improved suspend/resume latency on pixel 3 and pixel 4, but disabled it on pixel 5. qcom followed suit for sd 888, but apparently didn´t see google reverting it on pixel 5. Other OEMs such as Xiaomi or OnePlus already disabled s2idle on their SD888 devices in favor of deep- read more about s2idle vs deep here)

    GPU related features:
    - GPU driver updated to latest CAF-State
    - gpu/kgsl improvements from pixel 4/pixel 5 kernel
    - add low_prio_worker thread for gpu driver (Improves performance when tearing down processes (eg, via LMK) and not blocking currently running UI from submitting work to the GPU

    File System related features:
    - upstream BFQ-MQ to latest state in linux-mainline and default to 128KB readahead
    - improve memory allocations in kernfs
    - ufs improvements from pixel 4/ pixel 5 kernel
    - improve GC as to not interfere while user interaction is happening and prevent possible jitter or latency spikes

    Network related features:
    - Wireguard Support (Details)
    - advanced TCP algorithms enabled
    - use bbr as default TCP congestion algorithm (fasted algo according to this excellent research from @kdrag0n found here )
    - improved networking drivers from caf-upstream (especially wifi)
    - remove unnecessary wakelock from WLAN driver to reduce thousands of very short wakeups during a 7 hour deep sleep period
    - improved bluetooth performance (¹, ²)
    - Enable support for TTL spoofing

    Memory related features:
    - Speculative Page Faults left enabled (1. 2) (CAF 5.4 default, keep for documentation)
    - Fix various memory leaks in different subsystems
    - improved mm with patches from mainline
    - patches from kernel/common
    - improve memory allocations in various subsystems, video encode/decode, kernfs, cgroup
    - Backport to enable CONFIG_HAVE_MOVE_PMD (see here) , thanks @arter97
    - Backport to enable CONFIG_HAVE_MOVE_PUD (commit here) , thanks @arter97
    - free more RAM by removing unused reserved memory regions
    - mm: Micro-optimize PID map reads for arm64 (improves game performance, especially unity based games such as genshin impact)
    - MGLRU added (info here and here

    Security related features:
    - Control-Flow-Integration (CFI) and Link-Time-Optimization (LTO) (CAF 5.4 default, keep for documentation)
    - Use ThinLTO which was first used in the Pixel 4 XL Android R-Kernel instead of full LTO (CAF 5.4 default, keep for documentation)
    - Shadow Call Stack (SCS) Security-Feature ( 5.4 default, keep for documentation)
    - enable init_on_alloc for even more security, more information can be found in the commit message (CAF 5.4 default, keep for documentation)


    Misc Features:

    Wakelock Blocker:
    - advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
    - please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
    - blocking a kernel wakelock should only be done in case of firmware incompatabilities (WiFi network at work (can´t be changed) causes deep sleep to not work on the phone.) That´s the only use case I see for this feature. The kernel does not features this to improve battery life!

    Other features:
    - clean up asus drivers and fix a few warnings in kernel log
    - disable logging and debugging to make the kernel more lightweight in various places (includes binder, mm, vma, gpu, ipa etc)
    - fix several coding issues detected by newer Clang-Toolchains
    - enlarge dmesg size to ease debugging


    Flashing Guide, Download and Changelog

    Requirements:
    - unlocked Bootloader
    - USB-Debugging in developer options enabled
    - latest adb and fastboot binaries
    - working adb and fastboot environment
    - magisk root
    - a backup of stock boot.img or your magisk patched boot.img in case you want to go back to stock.

    How to flash the Kernel:
    1. Download the latest kernel.zip and make sure you have properly updated to the latest matching Firmware (check the feature list for the current firmware the source is based on). When there´s an OTA update for the Sony Xperia 1 III it takes Sony a while to release the source code for the new OS and me a while to build a new kernel. If you don´t want to face any issues, wait until I either release an updated kernel or give green light because there were no kernel changes.
    If you want to be sure there are no issues, always make sure to run the firmware the kernel is built for!
    If you feel adventurous and try in advance, make sure you have a backup ready!

    2. Flash the kernel.zip via latest TWRP (if available), EXKM or FKM app and do a full reboot.

    3. Reboot and profit.


    DOWNLOAD:
    Download is located always in this folder:

    Important: Read after Download
    Please take a look at the second post after flashing the kernel!

    Changelog:

    Android 11

    1.0.0 Initial Release
    1.0.1 https://forum.xda-developers.com/t/...xperia-1-iii-aka-sagami.4377449/post-86140929

    Android 12
    2.0.0

    Donations:
    Donations are not mandatory but very welcome if you want to support development or just buy me a coffee/tea :)
    If you like my work: http://paypal.me/freak07

    Credits:
    Sony for the development device, giving me the opportunity to create this project!
    @osm0sis for all his work, including the ak3 installer!
    @tbalden for being the best HTC, Pixel, OnePlus and now Asus wingman!
    @LeeDroid and @mwilky for their awesome roms and work I used on multiple devices!
    @Captain_Throwback for all the mentoring and guidance!
    @Eliminater74 for bringing me into the game and the Inspiration
    @nathanchance for his upstream guidance and assistance
    @RenderBroken for helping me out
    @flar2 for all his work
    @joshuous for all the help he provided to me in the past!
    @arter97 for giving me advice
    @kdrag0n for his help and advices!
    @topjohnwu for magisk!


    Source Code: https://github.com/freak07/Kirisakura_Sagami
    5
    Update to 2.0.0

    Hey guys and girls,


    Alright. The source code for Xperia 1 III for Android 12 firmware was finally released after 6 months of waiting time. 🥳
    USB connection issues are fixed now. Charger detection is fixed. Smart charging features work fine as well.

    The kernel is fully compiled from source with a lot of optimizations as well as latest CAF-Upstream and linux-stable.
    I´ll update the OP to reflect all the changes.

    More changes in the Changelog below:


    Changelog:
    - Import kernel source from 61.1.A.1.149 (works fine on latest a12 firmware)
    - Linux-Stable upstream bumped to 5.4.201
    - use prebuilt clang 14.0.7 for compilation
    - latest caf-upstream
    - for more details please check the first post
    - other improvements and tweaks please check github if you´re interested in details


    Download:



    Instructions can be found in the OP!
    But look at this post too :)

    Have fun, enjoy the kernel and your phone.

    Donations are not mandatory but very welcome.
    If you like my work and want to buy me a coffee/green tea to keep development going: http://paypal.me/freak07
    4
    Android 12 Kernel

    Hey everyone :)


    So I have to be honest with this post. It´s extremely frustrating for me that there´s no source code pushed yet for the Android 12 firmware. The first Android 12 Firmware (.149) was released at the beginning of January, with another update to .211 a while ago.

    No source whatsoever for A12 at this point. It´s frustrating after 2 months.
    I understand not every OEM has the ecosystem and means of google to push the source hours after the OTA is live, but 2 months is a really long time. It´s still a long time considering the kernel is based on a completely new qcom base and probably needs to be "re-edited" (deleting comments, wip progress marks, etc) before uploading the source archive in contrast to the more "simple" A11 updates, which is probably just a drag and drop operation and happened way more quickly.
    Given Sony more or less advertises their open source ambitions in various places it´s disappointing from my perspective.


    The A11 kernel source isn´t compatible with A12 and doesn´t boot.

    However the more I got frustrated over time I more or less hacked together a kernel for A12, which is working as best as its going to get without a matching source.
    That kernel is based on latest linux-stable and latest caf-upstream, with loads of other optimizations that were not in the A11 kernel, but were contained in my other kernels for 5.4 devices.

    The only real issue on that kernel is that usb port detection is wonky. It takes a while to detect a pc and for the usb file transfer dialog to pop up.
    My old Pixel charging brick works fine ( it takes a little while to get detected sometimes), while the stock charger only works if I connect the phone to my PC usb and directly afterwards to the stock sony charging brick.
    Otherwise there are no real issues for me.


    Feel free to test, but I probably won´t be able to fix any problems until we have a source code for the A12 kernel.
    4
    Alright here´s a kernel.zip that just force loads all drivers built as kernel modules that come bundled with the firmware. This means instead of building the full kernel from source, we just build the core and load all drivers from the stock firmware compilation from sony. This includes, fingerprint, camera, touchscreen etc and also the sony driver that´s responsible for battery care/smart charging. I think this should fix the smart charging issue for now.

    However I don´t like to do this as force loading modules can cause issues, if the kernel gets to far from the stock base as already happened on the initial release.
    I already needed to revert certain changes done to the full source built kernel, as force loading modules on the previous 1.0.1 release would just crash the device during startup.
    For now it´s fine, but the kernel I plan to do once A12 drops won´t be able to resort to this approach as it will contain a lot more changes.

    I hope I can get this driver somewhere so I can proceed to go forward as planned.

    Source is pushed to a different branch.

    Enjoy the holidays and have a nice Christmas time if you celebrate it. :)
    3
    F.A.Q:

    Question:
    Is root preserved when flashing this kernel?
    Answer: Yes, the AnyKernel.zip will detect root and keep it.

    Question: Safetynet does not pass on my phone since I unlocked the phone, why is this so?
    Answer: Google introduced hardware backed attestation recently. Unfortunately the old kernel tricks to still get safetynet passing won´t work. Instead you will have to rely on some magisk modules. Short guide in post #4 below.

    Question: How do I return back to stock or another kernel.
    Answer: Extract boot.img from the matching firmware you are on (you can do so by using this tool or similar ones found on XDA and when googling around) and flash them via fastboot. If you want to keep root flash back the magisk_patched_boot.img. Or dirty flash your rom and re-root.

    Question: Why is having Magisk installed mandatory for this kernel?
    Answer: The kernel uses a ramdisk overlay to apply some settings after boot. If you are not rooted these settings will not get applied and you miss some of the optimizations.

    Question: How to report bugs properly?
    Answer: Have a look at post #3 in the linked thread. The linked guide is a pretty good starting point.
    Before reporting any bug make sure you´re running on a stock configuration. That´s means you´re not using any mods, tweaks in kernel managers or other root tweaks , magisk modules, scripts or other modifications that alter various functions like sound mods, data traffic, sleeping behaviour, scheduler, magical battery tweaks etc.
    Try to describe the issue as detailed as possible! Give your exact setup, like rom, magisk version, kernel version.
    Is the issue reproducible? Does it happen frequently?
    Provide logs, otherwise debugging is a lot harder. If you can already reproduce the issue and provide logs it greatly limits the amount of time I have to spent until I figure out how to reproduce it.

    If the device force reboots/randomly reboots (that means you see the bootloader unlocked screen!) provide a .zip of /asdf.
    Easiest way is immediately after booting up, with a root explorer navigate to /asdf. Copy the contents to your internal storage, zip it up and send it to me.

    If the issue happens while the device is running provide a dmesg plus a logcat that you take while/shortly after the issue happens. This will log what´s running in the current session. Try to be as detailed as possible what´s happening when the issue appears. It will also help me in reading the log!