[KERNEL][04-02][Radon Kenzo V6.3][STABLE][CM-AOSP-MIUI]

Search This thread

wayne_rooney

Senior Member
I meant AOSP Extended. Amol, the dev is just a real good guy and have been supporting kate/kenzo for a long time. In my opinion AEX is the best pie rom, almost bug free, smooth and a good set of features without bloating the rom. It's been a while since I used Havoc but in my opinion that rom feels too bloated with every feature there is that no one really uses. Also I don't feel like changing roms too often and then AEX is a better bet. :good:

Yes both at based on AOSP. :)

sure, i will try the rom which i showed to you in the link. hope that's the correct version, [ROM]9.0.0_r34] AospExtended ROM V6.4 [OFFICIAL]. Thanks for your help. :fingers-crossed:
 

Ya_SG

Senior Member
Aug 9, 2018
385
94
What are some Oreo ROMs that work on this kernel? I’ve had Resurrection Remix previously, it didn’t boot for me.
 
Last edited:

Diovant

New member
Jun 17, 2019
1
0
My phone got bootloop after flashing this kernel

My kenzo stuck on Mi screen when i flashed Radon v6.3 based on AOSP oreo. I use ToxycOs v3.1 with oreo with Escrima kernel. How to fix it ? any solution ? I previously flashed AGNi without any problems at all. Sorry 4 bad english:D
 

JD. A

Senior Member
Sep 9, 2013
950
272
My kenzo stuck on Mi screen when i flashed Radon v6.3 based on AOSP oreo. I use ToxycOs v3.1 with oreo with Escrima kernel. How to fix it ? any solution ? I previously flashed AGNi without any problems at all. Sorry 4 bad english:D
Kernel is for the old trees and ROM with the new. No real solution unless you use an unofficial version.
 

Ya_SG

Senior Member
Aug 9, 2018
385
94
My kenzo stuck on Mi screen when i flashed Radon v6.3 based on AOSP oreo. I use ToxycOs v3.1 with oreo with Escrima kernel. How to fix it ? any solution ? I previously flashed AGNi without any problems at all. Sorry 4 bad english:D

Are you asking how to unbrick the device? You can just dirty flash the ROM and roll back to stock kernel.
 

abhilodha

Senior Member
Oct 21, 2016
121
10
Guys I logged in today to speak about my experience here
Great support by @umang thanks bro
My redmi note 3 finally touch stopped working so I bought new moto power one wanted to buy Nokia one plus but battery mah was low (my first choice was stock android)
In my experience chip quality of redmi is very cheap now I will try moto and will see how is the quality of chips....
This time I'm thinking of not wasting my time in unlocking booloader rooting flashing ever new update of ROM and every new version of kernel coz it takes time and does nothing productive I learnt a lot from flashing rn3 n number of times.






---------- Post added at 01:14 PM ---------- Previous post was at 01:14 PM ----------

Guys I logged in today to speak about my experience here
Great support by @umang thanks bro
My redmi note 3 finally touch stopped working so I bought new moto power one wanted to buy Nokia one plus but battery mah was low (my first choice was stock android)
In my experience chip quality of redmi is very cheap now I will try moto and will see how is the quality of chips....
This time I'm thinking of not wasting my time in unlocking booloader rooting flashing ever new update of ROM and every new version of kernel coz it takes time and does nothing productive I learnt a lot from flashing rn3 n number of times.




 

xpert45689

Member
Dec 1, 2017
21
1
31
Tokyo
Kernel can't flash properly because it can't mount /system

I'm trying to install this kernel but even though the aroma installer succeeds and phone boots, I still have stock kernel. I'm attaching the log files.
I'm using Huawei Y5 2017 with an unofficial LineageOS 14 (7.1.2).
Chipset: Mediatek MT6737T

If I use my fstab.mtk6735 instead of fstab.qcom, is that a good idea? If so, how can I do it?

Thanks
 

Attachments

  • Radon-V6.3-Kenzo-Cm-Ng.zip.log.txt
    2.5 KB · Views: 14

onliner

Senior Member
Oct 29, 2016
2,422
1,031
I'm trying to install this kernel but even though the aroma installer succeeds and phone boots, I still have stock kernel. I'm attaching the log files.
I'm using Huawei Y5 2017 with an unofficial LineageOS 14 (7.1.2).
Chipset: Mediatek MT6737T

If I use my fstab.mtk6735 instead of fstab.qcom, is that a good idea? If so, how can I do it?

Thanks

What? This kernel is for Redmi Note 3 Pro :eek:
 
  • Like
Reactions: xpert45689

onliner

Senior Member
Oct 29, 2016
2,422
1,031
@Umang96 should add a THIS KERNEL WORKS ONLY ON REDMI NOTE 3 because
Works on all lineage and aosp based nougat roms
Works on all lineage and aosp based marshmallow roms
Works on all MIUI 8+ marshmallow roms
made me try it

This post is in the subforum of the Redmi Note 3 Pro, so isn't necessary.
 

Jexboxer

Member
Jul 13, 2016
29
6
It says Support for 6.0.1 Android but when I head to download it, there are only two versions which are oreo and nougat. I am trying to flash it on Stock MIUI 10 Kenzo
 

AshevDroid

New member
Aug 21, 2019
1
0
Please

Help me bro
I'am use rom NitrogenOS Oreo 8.1
But is Bootloop after instal Radon Kernel Ov6.3
Can you help me? Why is not Work?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 630
    logo.png
    I am not responsible for bricked devices, dead sd cards, explosions, nuclear wars, alarm applications getting failed, please read the first 3 posts (features, faq, settings) carefully before flashing this kernel to make sure everything goes well with your installation.

    This kernel will focus on quality over quantity, I will add only those features which don't cause instability and really improve performance or battery life of our device. I like to test my changes properly before release and keep stability the topmost priority, I don't guarantee weekly or nightly builds, updates will be given whenever required.


    Some Kernel Features-

    Cpu Improvements -
    • Balanced, Battery and Gaming modes available for interactive governor
    • Mild undervolt for our cpu, reduces heat, helps battery backup
    • All basic governors and relaxed governors available, default is interactive
    • Toggles for wakeup boost, hotplug boost, touch boost
    IO & Memory Improvements -
    • Added fiops, bfq, zen, maple, sio io schedulers
    • Disabled io crc check for more performance
    • Zram with lz4 & lz0 compression support available
    • NTFS, exFAT, F2FS, EXT filesystems support
    Gpu/Display Improvements -
    • Fixed wrong gpu frequency reflected in sysfs
    • Optional enhanced color profile, choose while flashing
    • Adreno idler and adreno boost are available, off by default
    • Savoca's kcal color control, full control over colors
    • Wake gestures, dt2w, s2s and s2w for all panels
    Charging/Battery Improvements -
    • Option to select 2000mA or 2400mA charging rates
    • Tuned interactive governor for better battery backup
    • Mild stable undervolt for both cpu and gpu
    • Optimizations for better load and power management
    Other Improvements -
    • Sound control for speaker, earphones, mic etc
    • Option to select selinux mode while installing
    • Compiled with aosp 4.9.4 aarch64 toolchain
    • Fsync toggle available, enabled by default
    • Custom vibration intensity control available
    Confirmed working or not working on -
    • Works on all lineage and aosp based nougat roms
    • Works on all lineage and aosp based marshmallow roms
    • Works on all MIUI 8+ marshmallow roms
    Flashing Instructions -
    • Prefer flashing over your rom's stock kernel for best results
    • Read post #2 for some frequently asked questions
    • Download correct version of Radon kernel
    • Make backup of system, boot in twrp
    • Now, wipe dalvik cache and cache
    • Flash the kernel zip and reboot
    Note - In case the kernel doesn't boot for you, restore your system and boot partition from twrp and you will not lose any data.

    Stable build downloads -
    Radon V6.3 Stable Builds ( Android 8.1.0, 7.1.2 & 6.0.1 )


    Kernel control app -
    Radon kernel control


    If you like my work, consider donating -
    Paypal


    XDA:DevDB Information
    Radon Kernel For Kenzo, Kernel for the Xiaomi Redmi Note 3

    Contributors
    Umang96, TheStrix, Balika011, ktomov, abhishek987
    GuneetAtwal, MOVZX, franciscofranco, flar2
    alex9yust, billchen1977
    These are not in any specific order, please pm me If I missed anyone :)

    Version Information
    Source: Github
    Status: Stable
    Current Stable Version: V6.1
    Created 2016-07-09
    Last Updated 2017-12-10
    231
    Kernel tuning tips -

    Cpu -
    • Governor: Interactive for all kind of users, select battery/balanced/gaming mode while installing according to your need, balanced and gaming modes are totally smooth but battery mode might have little lags.
    • Users who wish to further push battery backup can try using relaxed cpu governor on small cluster, reducing max frequency of small cluster will also improve battery backup.
    • By default, I use these min cpu frequencies 691Mhz (small cluster) and 883Mhz(big cluster), there is also 400Mhz option but I don't recommend using that since it saves negligible battery.
    • Input boost and touch boost should be kept on by balanced/gaming users, battery biased users can consider turning them off.
    Memory -
    • Adaptive lmk should be enabled by all users
    • Z-RAM 512MB with at least 40 swappiness
    • Z-RAM will increase battery consumption a little bit
    • Keep Z-RAM off if you need extra battery backup
    IO Scheduler -
    • FIOPS for good performance and battery
    • Read ahead at least 512 KB on both internal and external
    Screen -
    • Adjust this yourself, I don't know what you like.
    Gpu -
    • Adreno idler - only battery biased users should keep this on.
    • Adreno boost - gamers or performance biased users should keep this on.
    Misc -
    • Fsync -Enabled for more stability, disabled for more performance.
    • Vibration intensity - I use 60, select whatever you like here.
    Note - All settings are compatible with Radon kernel control.
    160
    Frequently Asked Questions -

    Q ) I like this kernel, can I be a part and contribute to this project ?
    It takes many hours to maintain this kernel, If you are a user then donations are appreciated. If you want to contribute to development then you can create your pull requests on my github or pm me with your patch.
    Q ) I flashed this kernel, what next ? How and where do I configure kernel related settings ?
    Recommended app is Radon kernel control, it offers very easy to use custom profile based tweaking, you may check post #3 for some tuning tips if you like to tune kernel settings yourself.
    Q ) Read mode in miui is not working after flashing this kernel ?
    Xiaomi hasn't provided the opensource code for this feature, so read mode is not going to work on custom kernels, but you can try going into display tab of radon kernel control app and make a custom profile with R,G,B(254,234,195) and saturation 40 for very similar experience to miui read mode.
    Q ) My fingerprint doesn't work, what to do ?
    Kenzo comes with two different sensors, fpc and goodix, all nougat roms have fixed support for both sensors, but if you use miui rom and you have goodix sensor then you might need to flash the patch from post #6196.
    Q ) I flashed this kernel, but I want to return to my stock kernel, how to do that ?
    If you read flashing instructions in first post, you will see that I asked you to make backup of boot and system partitions before flashing my kernel, now you can restore that backup and you will have your stock kernel back. In case you didn't take a backup, just dirty flash your rom zip without wiping data and that will restore stock kernel and modules.
    Q ) How much battery backup does this kernel give ? Will it give me x hours of SOT ?
    The battery backup depends a lot on your usage, like screen brightness, wifi, 3g/4g data. Changing your kernel or rom will not make battery backup double. If you are just wifi user, your device can give 9+ hrs screen on time. Heavy 3G, 4G, Bluetooth users shouldn't expect huge battery backup. Regarding battery consumption when display is off, I normally lose 2% battery for about 8-9 hours of standby, but if you you keep wifi and data off in night, then you should get 0-1% drain per night.
    87
    Update Radon V3.7.6 -

    Changelog For Nougat -
    • Merged latest caf changes LA.BR.1.3.6_rb1.12
    • Prima wlan driver updated to LA.BR.1.3.6_rb1.12
    • Camera actuator: use correct park lens step values
    • Interactive: increase timer rate when screen off, saves juice (removed from V3.7.5)
    • Updated to new fuel gauge and power drivers (added in V3.7.5)
    • Fix battery drop by 2% instead of 1% sometimes (added in V3.7.6)
    • Interactive: made battery, balanced, gaming configs more smooth
    • Adreno: be aware of display state to reduce overhead
    • Charging: Fixed rates not working, also simplified them
    • Charging: Now either select 2400mA or 2000mA rates
    • Enhanced colors: Made them more comfortable for eyes
    Changelog For Marshmallow -
    • Interactive: made battery, balanced, gaming configs more smooth
    • Interactive: increase timer rate when screen off, saves juice (removed from 3.7.5)
    • Adreno: be aware of display state to reduce overhead
    • Charging: Fixed rates not working, also simplified them
    • Charging: Now either select 2400 or 2000 rates
    • Enhanced colors: Made them more comfortable for eyes
    Important Information -
    • You can flash 3.7.5 directly over 3.6 or 3.7 but if you are on any other kernel then must restore stock kernel first.
    • If camera/flash is not working sometimes on Nougat, it is a known bug in all Nougat roms, read post #2 FAQ.
      [*]If you want a fix for flashlight tile, then read this thread by me.
    • Miui marshmallow goodix fp users can check post #6196 for a fix.
    Downloads -
    Thanks to all the testers for their help.
    82
    Update Radon V4.0 -

    Changelog For Nougat -
    • Kernel upstream, merged linux 3.10.105
    • Merged latest caf updates LA.BR.1.3.6_rb1.14
    • Prima wlan updated to LA.BR.1.3.6_rb1.14
    • Completely removed hotplug, was causing heating/drain with mid or heavy use.
    • Many changes to battery mode in aroma, also, it will turn off input & touch boost now.
    • Adrenoboost will be off by default in balanced mode but on (low) in gaming mode.
    • Both balanced and battery modes should have improved battery and less heat now.
    • Cleaned up some compilation errors/warning to make building process easier.
    Changelog For Marshmallow -
    • Merged latest caf updates LA.BR.1.3.4_rb1.31
    • Prima wlan updated to LA.BR.1.3.4_rb1.31
    • Completely removed hotplug, was causing heating/drain with mid or heavy use.
    • Many changes to battery mode in aroma, also, it will turn off input & touch boost now.
    • Adrenoboost will be off by default in balanced mode but on (low) in gaming mode.
    • Both balanced and battery modes should have improved battery and less heat now.
    • Cleaned up some compilation errors/warning to make building process easier.
    Important Information -
    • You can flash 4.0 directly over 3.9 or 3.8 but if you are on any other kernel then must restore stock kernel first.
    • If camera/flash is not working sometimes on Nougat, it is a known bug in all Nougat roms, read post #2 FAQ.
      [*]If you want a fix for flashlight tile, then read this thread by me.
    • Miui marshmallow goodix fp users can check post #6196 for patch.
    Downloads -
    Thanks to @lafonte, @Sumit Samantha, @Raaj52, @Tyaginator, @razorinc for testing and helping.