[KERNEL][08/03/2016][KK/LL][Shaky156-V1.1][OC - UV - GPUOC - 4K HDMI - FIOPS - XZ ]

[Shaky156]

This is the first custom kernel compiled for TegraNote 7 device. Alot of hard work has been put into this to make this possible.
DISCLAIMER
I am not responsible of your device gets damaged from flashing this kernel
​

Features:​

​

4 Main cores:
UV
OC - 2.1Ghz

Lp1 core:
Low Volt support

GPU 2D, 3D - 708Mhz
SDcard read and write speed increased
HDMI - 4k output
Thermal throttling tweaked
CPU boost upon touch disabled
Setting min and max of 1 core sets all cores min and max frequency
RAM Voltage lowered
Default schedular - FIOPS
Compiled with -mtune flag
Compatible with stock ROM
XZ (LZMA) compression
Much more


Change-log:



Installation:
1 - Download ZIP file
2. Reboot into TWRP recovery - (adb shell reboot recovery)
3. Install ZIP file, locate file and select to flash.
(Stock Kernel has been provided incase anyone would like to revert




Downloads:
Custom Kernel - KitKat: http://d-h.st/hr2
Custom Kernel - Lollipop: http://d-h.st/C7u2
Stock Kernel-4.4: http://d-h.st/68M
Stock Kernel-5.1:


Source-Code:
Nvidia - http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
GITHUB: https://github.com/Shaky156/Tegra-Note-7

​

 

[mouhii]

Thank you Shaky for providing this kernel and for the hard work, I'll try to test this ASAP !

 

[Shaky156]

Thank you Shaky for providing this kernel and for the hard work, I'll try to test this ASAP !

OP Updated with download link

Edit: will upload soon an updated kernel

 

[Shaky156]

OP Updated with new release! enjoy

 

[ElGrecko]

OP Updated with new release! enjoy

It's running..! Looking good so far

Sent from my TegraNote-P1640 using Tapatalk

 

[Shaky156]

It's running..! Looking good so far

Sent from my TegraNote-P1640 using Tapatalk

Yes updated OP last time with a newer download link:
Fixes Wi-Fi randomly disconnecting issue

Tested with 3dmark, 2000+ increase in score, >10% fps increase with gaming

 

[ElGrecko]

Maybe just my end as i have xposed framework & gravity box, but auto rotate doesn't work so well, stays fixed on initial orientation.

Sent from my TegraNote-P1640 using Tapatalk

 

[Shaky156]

Maybe just my end as i have xposed framework & gravity box, but auto rotate doesn't work so well, stays fixed on initial orientation.

Sent from my TegraNote-P1640 using Tapatalk

Tested you are correct. Away from computer so shall check it out tomorrow, nvidias made it difficult

 

[ElGrecko]

Appreciate that and all the work you've put in. Have a good night.

Sent from my TegraNote-P1640 using Tapatalk

 

[Shaky156]

Appreciate that and all the work you've put in. Have a good night.

Sent from my TegraNote-P1640 using Tapatalk

OP Updated, fixed sensors that everything working now
also restored CPU touchboost as it uses low power core and it makes it smoother compared to without it.

 

[ElGrecko]

Confirmed as working. Definitely running cooler as well now.

Sent from my TegraNote-P1640 using Tapatalk

 

[subzero82]

Hello.Is this for 4.4 only or can be used with 4.3?.

 

[Shaky156]

Hello.Is this for 4.4 only or can be used with 4.3?.

For android 4.4 but it should work with 4.3 (untested)

 

[hacktrix2006]

Loving the latest Kernel mate, nice work.

I can quite agree with Nvidia making modding this tablet hardwork with their sources being like they are.

Whats even better with this Kernel is we can now have Custom bootanimations without it hitting the dam /lbh partition for it. So now i have a Android L Bootanimation lol

 

[neontigers]

What's the best Kernel tweaker to use with this ?

 

[Shaky156]

What's the best Kernel tweaker to use with this ?

Set CPU is good, haven't tested antutu master etc etc, setting one core will set all cores so all applications should be compatible

 

[neontigers]

Set CPU is good, haven't tested antutu master etc etc, setting one core will set all cores so all applications should be compatible

Well I've tried both trickster mod and antutu and whenever I set the cpu speed and governer, press apply, then exit the app when I open the app again it reverts to the original CPU speed and governer that the kernal came with. Any fix for this ?

 

[Shaky156]

Well I've tried both trickster mod and antutu and whenever I set the cpu speed and governer, press apply, then exit the app when I open the app again it reverts to the original CPU speed and governer that the kernal came with. Any fix for this ?

I haven't not had that issue, if you can provide a log maybe I can look into it. Make sure you have root, I have left userspace control so everyone can still control it within the setting menu choosing Max power or power saving. Oh I have 2 incoming updates tonight

 

[neontigers]

I haven't not had that issue, if you can provide a log maybe I can look into it. Make sure you have root, I have left userspace control so everyone can still control it within the setting menu choosing Max power or power saving. Oh I have 2 incoming updates tonight

Here ya go,hopefully its helpful, this is me setting the frequency,closing the app and opening again

 

[Shaky156]

Here ya go,hopefully its helpful, this is me setting the frequency,closing the app and opening again

its not 1kb, and you've provided wrong log. I'm all for helping but dont wasting my time