Search This thread

T!b

Senior Member
Jan 10, 2011
441
46
35
Unfortunatly I don't think Siyah backup preload partition, when I restore my backup I have a part of the old sys, which is not very good..
 

ore616

Senior Member
Apr 4, 2011
325
77
Brisbane
Great to see you back on the SGS2 Gokhan (thanks to the donor)

Have flashed this over CM10.1 Build 18th but i'm getting no Signal/Data through modem? Just sayin

*EDIT: I think my phone just had a spaz... will try wipe/flash everything :)
 
Last edited:

THE RED BLUR

Senior Member
Mar 7, 2012
6,995
21,770
LONDON
Unfortunatly I don't think Siyah backup preload partition, when I restore my backup I have a part of the old sys, which is not very good..

Read the changelog. Its on his to do list. :rolleyes:

However you can make a backup and restore of preload with siyah by using Hawkerpauls scripts see in my cave for links to it in signature.

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk
Main ROM: AllianceROM LSD beta
KERNEL : Siyah 6.0b5
(DEFAULT PROFILE AND SETTINGS )
MODEM : LS8
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex
Root Manager : SuperSU 1.04

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790

 

THE RED BLUR

Senior Member
Mar 7, 2012
6,995
21,770
LONDON
Yep WiFI Hotspot is not working for me too. Dorimanx Kernel has the same issue.

Well he did say CM10.1 is not supported officially on changelog. :rolleyes:

Its working fine on Samsung jb. :):thumbup:

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk
Main ROM: AllianceROM LSD beta
KERNEL : Siyah 6.0b5
(DEFAULT PROFILE AND SETTINGS )
MODEM : LS8
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex
Root Manager : SuperSU 1.04

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790

 

T!b

Senior Member
Jan 10, 2011
441
46
35
Read the changelog. Its on his to do list. :rolleyes:

However you can make a backup and restore of preload with siyah by using Hawkerpauls scripts see in my cave for links to it in signature.

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk
Main ROM: AllianceROM LSD beta
KERNEL : Siyah 6.0b5
(DEFAULT PROFILE AND SETTINGS )
MODEM : LS8
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex
Root Manager : SuperSU 1.04

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790


Woops sorry I was on his official site.. but even on the OP can't see it.. my eyes ? ^^
BTW glad to hear that :)
 

sefrcoko

Senior Member
Feb 20, 2012
2,375
1,286
Small visual bug encountered - whenever I enter Stweaks, I'm getting "apply" and "discard" options immediately. Anyone else?
Yes me too.
PHONE: Samsung Galaxy S2 GT-I9100M
ROM: Alliance 6.1 XWLS8 (Jellybean 4.1.2)
KERNEL: Speedmod K5-1
MODEM: XXLS8
EXTERNAL: 32GB Class 10 MicroSD
SUPERUSER APP: SuperSU 1.05
MODS: None!
UV/UC/OC: None!
 
  • Like
Reactions: pilgrim011

gokhanmoral

Retired Senior Recognized Developer
Mar 16, 2006
3,744
25,415
45
Ankara
www.isyam.bilkent.edu.tr
Small visual bug encountered - whenever I enter Stweaks, I'm getting "apply" and "discard" options immediately. Anyone else?

I recommend you all to reset stweaks settings because frequency indices changed. that apply/discard probably shows up because of the smooth scaling setting which uses an old index and that index is not present in the latest kernel. the default value of that setting was 8 while we have only 6 steps in the latest kernel and the default value is 3 now.
 

pilgrim011

Senior Member
May 3, 2008
1,639
456
Belgrade
www.tvojsajt.com
Working fine for me.
Have you tried clearing STweaks profile in CWM and setting your options back up again?

Well that is the first thing that I do after flashing - before first boot I reset Stweaks profile. Will do it again, just in case.

---------- Post added at 02:30 PM ---------- Previous post was at 02:07 PM ----------

I recommend you all to reset stweaks settings because frequency indices changed. that apply/discard probably shows up because of the smooth scaling setting which uses an old index and that index is not present in the latest kernel. the default value of that setting was 8 while we have only 6 steps in the latest kernel and the default value is 3 now.

Reseted Stweaks settings from Stweaks app, still the same. Rebooted to recovery, reseted Stweaks profiles from there, still the same. If that's important, I'm on LS8 based Alliance ROM, previous kernel used was Philz stock.


Edit - solved after I selected "apply" from Stweaks (previously I was discarding every time), then popup appeared with info about change applied - smooth scaling disabled or something similar. So, the issue is solvable by simply applying the change.
 
Last edited:

sefrcoko

Senior Member
Feb 20, 2012
2,375
1,286
Still getting no service/data from my provider.

Waiting for next update :)
No problems for me. What rom are you using? No details in your post...
PHONE: Samsung Galaxy S2 GT-I9100M
ROM: Alliance 6.1 XWLS8 (Jellybean 4.1.2)
KERNEL: Siyah 6.0b5
MODEM: XXLS8
EXTERNAL: 32GB Class 10 MicroSD
SUPERUSER APP: SuperSU 1.05
MODS: None!
UV/UC/OC: None!
 

Rawi666

Senior Member
Sep 11, 2011
241
214
Still getting no service/data from my provider.

Waiting for next update :)

But kernel has nothing to do with 2g/3g signal... you're probably using latest CM which causes signal issues.
Download "GetRIL" app from market and try to download RIL

"I9100XXLQ6; I9100XWL..."
hash: dff73d2fdce92....

This is the version from previous CM's which worked fine for me at least.

If something goes wrong => reflash rom and reflash your modem.
 
  • Like
Reactions: ore616

Top Liked Posts

  • There are no posts matching your filters.
  • 1352
    please leave non-dev related posts here: http://forum.xda-developers.com/showthread.php?t=1658647

    siyahkernel-ics-wide1.png

    Features:
    • based on JB sources
    • DISABLED CAP_ERASE (No superbrick bug)
    • All-in-1kernel because it supports CM9, CM10, Samsung, MIUI and Boot-to-Gecko (B2G) ROMs with a single kernel image. (no Sense4all support)
    • Dual booting support for all supported ROM types. See droidphile's post for Dual Booting FAQ
    • Custom CWM touch recovery with swipe gestures and double-tap selection
    • 6-steps CPU freq
    • 5-step GPU frequency levels. VPLL Mode to have additional frequency steps. defaults frequencies: 66-108-166-267-330.
    • Auto-root. You can also remove root via STweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
    • CPU Overclock/Undervolt support (we have two interfaces for that. both of them are defacto standard)
    • Tweakable vitalij's value (set to 5 as default)
    • Adjustable touchpad led brightness
    • Fixed fuelalert wakelocks
    • You can completely disable android logger using STweaks app
    • Faster charging for misc and USB modes. There are 3 modes (AC, Misc, USB) and normally last two of them support only slow charging. You can have charging speed of AC by increasing it (especially user while charging in car or using USB port)
    • Cpu governor optimizations
    • Gpu voltage, clock and stepcount interfaces (GPU Overclock/Undervolt)
    • Screen brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio's voodoo display app when it is released. brightness modification will only change auto-brightness response.
    • BLN support both for Samsung and CM ROMs (you can use STweaks, Nstools or BLNControl app from the market to enable it)
    • Breathing or Blinking effect for BLN. (Make sure you don't enable blinking in any other BLN app) Use STweaks to select one of them.
    • Better touch sensitivity
    • Available CPU Governors: Pegasusq (default), Ondemand, Lulzactive, SmartassV2, Interactive and Conservative, Performance, Userspace, Powersave
    • CIFS as module
    • Available I/O schedulers: CFQ (default), noop, Deadline, SIO, V(R)
    • J4FS as module
    • ARM topology support (SCHED_MC)
    • Automatic EFS Backup
    • Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
    • USB Mass Storage mode is working in CWM Touch Recovery and you can mount both internal and external sdcard as a disk drive
    • NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
    • USB mouse and keyboard support
    • built-in profile support with default, battery and performance presets (you can change them in CWM Recovery). Even using everything default will save you a lot of battery juice.
    • Eargasm for headphone amplification (in STweaks) as free Voodoo Louder replacement
    • Almost everything is configurable such as scheduler features, hotplug thresholds, GPU frequencies, voltages, arm topology modes... and they are configurable via simple and free STweaks app which is embedded in the kernel and soon in Google Play & Opensource
    • Adjustable mDNIe settings
    • optional sharpness tweaks from hardcore
    • mDNIe negative effect toggle with home button (press it four times)
    • Touch gesture support by Tungstwenty. (http://forum.xda-developers.com/showthread.php?t=1831254)
    • BLNWW (BLN Without Wakelock)
    • Slide2Wake (originally by Fluxi)

    More to come...


    Known Problems:
    • no known problems yet

    Thanks To:

    • Chainfire, Codeworkx, Arighi, Tegrak, Vitalij, Entropy512, Netarchy, koush, Creams, sk8erwitskil, hardcore, Pikachu, myfluxi, Tungstwenty
    • This part will be expanded. most of the patches I applied are coded by someone else. please remind me if I forget to give credits to anybody..

    IRC support and chat:
    Server: irc.FreeNode.net
    Channel: #siyah-kernel
    web client: http://siyah.twosx.net/ (thanks to omniwolf)
    Changelog:

    See http://www.gokhanmoral.com/ for changelog.

    You can find the sources at http://github.com/gokhanmoral/siyahkernel3
    and initramfs at http://github.com/gokhanmoral/initramfs3

    Todo:
    these are my future plans and some of them are dreams only...
    • apply chargecurrent modifications even if the cable is connected on boot
    • add optional teamwin recovery
    • make dual-boot timeout configurable
    • implement BFN (BackFlashNotification)
    • scheduling for BLN
    • organize recovery menu items
    • higher polling rate for light sensor
    • remap mouse right button to back button
    • exfat support
    • fix blnww battery drain issue (may not be possible)
    • implement dual-booting with GB+ICS ROMs
    • faster switch between first and second ROMs without needing to reboot if possible.
    ...

    298
    troubleshooting

    siyahkernel-ics-wide1.png

    READ THESE FIRST

    • Never report any bugs to CM9/CM10 threads if you use it together with SiyahKernel
    • Do not ask questions to me directly. This is a common thread, not my personal inbox. Ask your questions in the thread and do not target them to anyone.
    • Do not expect answers to all your questions. There are some questions which nobody knows the answer of.
    • Do not forget that this is a development thread. There is another thread in general section for those who wants to discuss battery life and chats. If your post does not include a feature request, bug report or suggestion it should be posted to the other thread.
    • No ETA for new version. Even if I sometimes talk about release dates those may change and they change for some good reason or because of my real-life obligations.
    • Make use of "Search this Thread -> Advanced Search"
    • Never ever discuss anything deep-sleep related in this thread. I do not make modifications to prevent sleep and 99% of deep sleep problems are application/ROM related. discuss it in general section. I do not want any positive ("this kernel sleeps like a baby") or negative ("There is a big problem with deep sleep. Please fix it") messages in my development thread.
    • If you do not provide details about your configuration and settings nobody can help you or nobody will care about your problem/bug report. The problems without details (ROM, settings, preferably the version that the problem first happened or the one that you don't experience the problem) will be ignored.
    • Never ever report any SOD issues if you are undervolting/overclocking and make sure you attach last_kmsg log. If you don't know what it is report the problem to the other thread because one more post without any useful information on dev thread will help noone including yourself.


    FAQ:

    Q: I am having some random lockups with some apps
    A: try removing root by using STweaks app and restart.

    Q: What is the difference between STweaks and ExTweaks?
    A: Both have similar functionality. ExTweak is Xan's implementation of the UCI interface (which is designed by Xan and me with the helps of AndreiLux and implemented in the kernel as open scripts by me) and STweaks is mine. I was hoping Xan would release the sources of ExTweaks (without profile support) but he changed his mind and I decided to open STweaks. Soon they will have almost identical functionality, so you can use whichever you like.

    Q: Does this kernel work on XXXXXX-ROM?
    A: If the ROM is based on Samsung Stock ICS Rom LPQ or newer, it should. Otherwise, search the thread... If you cannot find any reference to that ROM, try the kernel. You won't lose anything by trying this kernel. Worst case scenario is to reflash your previous kernel or ROM. You can backup your previous kernel with Hellcat's k-tool from the market.

    Q: Where is CM9, MIUI or Samsung ROM versions?
    A: There is only one version. Both ROMs are supported with a single kernel image.

    Q: What is the best settings?
    A: It is the one you try yourself and like.

    Q: I have just lost 20-30% battery by just rebooting/flashing the kernel. Is it a bug?
    A: No. It happens because of our fuel gauge chip which doesn't require calibration goes crazy sometimes. It is not related with kernel or ROM. Just reset fuel gauge chip using STweaks app (or remove the battery and wait 3 minutes) and then charge your phone.

    Q: BLN doesn't work.
    A: you need to enable it in stweaks or BLN app. if you have more than one app to configure bln make sure all of them use the same settings.

    Q: BLN works in test mode but it doesn't work otherwise.
    A: if test mode works you should blame the apps. Stock messaging and email apps may not support BLN and in some other applications you may need to enable notifications. Either find another application or change your ROM.

    Q: Can I use breathing effect without using BLN?
    A: for now, breathing effect only works in BLN. There is no way of using it otherwise.

    Q: I need to disable and re-enable BLN in stweaks to get it working again. What is the problem?
    A: You may have another BLN related application (BLNapp, nstools, or a script) which disables BLN after stweaks apply the setting at early boot stage. you have to either uninstall that app or enable BLN in that app as well.

    150
    closing the thread once again...

    I don't want to piss the mods again because this thread attracts too many people.
    most of them misinterpret the "this is a development thread" statement and use the thread for their self-development purposes.

    There are very few people who give useful feedback and suggestions and I talk to them over gtalk, email or PMs anyway.

    greetings :)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone