Development [Kernel][21.03.2023][Android 13.0.0]Kirisakura 1.0.0_Raviantah for Pixel 6/Pro aka "RAVIOLE"

[Druboo666]

CleanSlate config app

Is CleanSlate config app a paid app?

 

[linus207]

Do I need to flash stock kernel if updating to a new ROM build? Thanks

You mean stock rom? The kernel is included in the update package, so you don't need to do anything before installing the rom. After installation, however, you need to reinstall Kirisakura.

 

[dyval]

You mean stock rom? The kernel is included in the update package, so you don't need to do anything before installing the rom. After installation, however, you need to reinstall Kirisakura.

So if OTA update comes, I just need to restore factory image from Magisk, install update, and then install magisk on inactive slot and reboot to keep root. Is that right? Thank you.

 

[linus207]

So if OTA update comes, I just need to restore factory image from Magisk, install update, and then install magisk on inactive slot and reboot to keep root. Is that right? Thank you.

That's a lot more than I do. I disable the magisk modules, install the already magisk-patched system image via pixel flasher (no wipe) and then enable the modules and install Kirisakura. All in the active slot

 

[dyval]

That's a lot more than I do. I disable the magisk modules, install the already magisk-patched system image via pixel flasher (no wipe) and then enable the modules and install Kirisakura. All in the active slot

Alright. But I mean will my steps above work too?

 

[73sydney]

That's a lot more than I do. I disable the magisk modules, install the already magisk-patched system image via pixel flasher (no wipe) and then enable the modules and install Kirisakura. All in the active slot

Similar here, i use the full rode warrior method though, for extra checking, before flashing the kernel:

Platform-Tools v34.0.0 HAS ISSUES - Unlock bootloader / Root Pixel 6 Pro [Raven] / all relevant links

Pixel 6 Pro [Raven] See @Lughnasadh's post below regarding Platform-Tools v34.0.0 issue(s). I suggest sticking with 33.0.3 for now. @Dave_247 created an issue about the apparent bug in Platform Tools 34.0.0. Suggest people go there and +1...

forum.xda-developers.com

 

[linus207]

Alright. But I mean will my steps above work too?

I don't see any reason why it wouldn't work

 

[abalam]

A question, when I wanna flash this kernel can this just be done or do I have to start clean and start with disable-verity

 

[w_tapper]

A question, when I wanna flash this kernel can this just be done or do I have to start clean and start with disable-verity

not on pixel 6/6 pro

 

[amritpal2489]

Is this kernel working on QPR2 now??

 

[pakin1]

Can someone explain me how single developer is achieving better results with his kernel than entire google company?

What's pushing Google's back? I'm getting way way better thermals with this kernel, better battery life, faster charging, more responsive phone and more reliable notifications.
I bought my Pixel 6 on preorder( very bad idea btw) because I smashed my previous phone. I hated it since first(feeling like I was a free beta tester) week, but this kernel is changing everything.

 

[cbomb1337]

Is CleanSlate config app a paid app?

I think there's links to free ones at first I didn't understand it all and couldn't find the free APK and accidentally bought it.

So if OTA update comes, I just need to restore factory image from Magisk, install update, and then install magisk on inactive slot and reboot to keep root. Is that right? Thank you.

Sounds like some work because I don't know if magisknwill install to next slot I haven't checked . I just plug my phone into PC and use pixel flasher it's a goddess of a software . I like to look on Google flash tool to see what rom choices there are then google the code to get the link to the Google downloads page for it and download the firmware file and open it in pixel flasher and click extract and patch boot and select it and flash rom and boot image.

Can someone explain me how single developer is achieving better results with his kernel than entire google company?

What's pushing Google's back? I'm getting way way better thermals with this kernel, better battery life, faster charging, more responsive phone and more reliable notifications.
I bought my Pixel 6 on preorder( very bad idea btw) because I smashed my previous phone. I hated it since first(feeling like I was a free beta tester) week, but this kernel is changing everything.

I also am noticing better battery life and thermals are like 2 Celcius lower at times. I l log the battery level and mah drain every 3 kind using 3c toolbox. Thanks Mr Dev and thanks for responding about battery saver and that kind of info. I tried to use clean slate to make vibrations stringer and it didn't work. Can you add vibrations strength so it appears in like fkm.

 

[73sydney]

Neither CleanSlate app really offers up anything id use, just in case people are wondering if you "need" them.....you dont...

All that swipe to sleep stuff is just giving up battery.....i like my electrons to stay in one side of the battery as long as possible, thanks

As an aside, you may wish to try this (aggressive) doze profile magisk module i use (same settings as in the TeMeFi app from here:

[APP][TOOL] TeMeFI comprehensive system Administration

TeMeFI This app provides/returns a bucket load of information regarding your device and the currently running ROM, and much, much more. And hence the name "TeMeFI"; as its Too Much F????? Information. The F stands for whatever your comfortable...

forum.xda-developers.com

I just put the settings into a module for myself, havent shared it before now

Additionally the module also disables phenotype.service.sync.PhenotypeConfigurator to stop Android from resetting the device_idle_constants settings so that the Doze settings stay set

And yes, i still get all my notifications, but ymmv...if you have an issues, dont PM me about it, remove the module and reboot...the beauty of magisk modules...

 

[Freak07]

Is CleanSlate config app a paid app?

If you check the Cleanslate thread on XDA there's a free and a paid version.

So if OTA update comes, I just need to restore factory image from Magisk, install update, and then install magisk on inactive slot and reboot to keep root. Is that right? Thank you.

Install to inactive slot after OTA doesn't work correctly for most users on pixel 6 devices and causes bootloops.

Use either factory image, full OTA.zip or the web flash tool. Afterwards just root by patching the boot.img.

Is this kernel working on QPR2 now??

No, no support for beta firmware from my side. Please search the thread it's been answered multiple times.

Neither CleanSlate app really offers up anything id use, just in case people are wondering if you "need" them.....you dont...

All that swipe to sleep stuff is just giving up battery.....i like my electrons to stay in one side of the battery as long as possible, thanks

As an aside, you may wish to try this (aggressive) doze profile magisk module i use (same settings as in the TeMeFi app from here:

[APP][TOOL] TeMeFI comprehensive system Administration

TeMeFI This app provides/returns a bucket load of information regarding your device and the currently running ROM, and much, much more. And hence the name "TeMeFI"; as its Too Much F????? Information. The F stands for whatever your comfortable...

forum.xda-developers.com

I just put the settings into a module for myself, havent shared it before now

Additionally the module also disables phenotype.service.sync.PhenotypeConfigurator to stop Android from resetting the device_idle_constants settings so that the Doze settings stay set

And yes, i still get all my notifications, but ymmv...if you have an issues, dont PM me about it, remove the module and reboot...the beauty of magisk modules...

Sweep to sleep does not cause any additional battery drain. The touchscreen is enabled anyway.
Same for the other features. It's negligible.

I appreciate you sharing your settings with the community, but the nightmare about missed notifications is you might not know, until it's way too late. Always tricky.

I also am noticing better battery life and thermals are like 2 Celcius lower at times. I l log the battery level and mah drain every 3 kind using 3c toolbox. Thanks Mr Dev and thanks for responding about battery saver and that kind of info. I tried to use clean slate to make vibrations stringer and it didn't work. Can you add vibrations strength so it appears in like fkm.

Adjusting vibration strength works fine on my end via the Cleanslate app. FKM does not support the endpoints.
Make sure to hit the save button in the CleanSlate config app, after enabling the setting and adjusting the override strength.

 

[linus207]

Hi. I am looking for a place to share a certain query. More like a curiosity. I hope you don't consider my post as offtopic. My setup is a stock rom with the latest Kirisakura kernel and a few basic modules: Safetynet fix, volte, lsposed, aosp mods, acca. Since the beginning of November, my wireless charger has consistently charged at 3.5W. Yesterday I had some problems with my google account: unable to back up to google one, error when accessing password manager. The problem suddenly appeared yesterday, so I decided to do a clean install. I backed up to the cloud via Swift Backup and did a clean install of the December rom. I installed kernel, modules, restored applications and everything worked as it supposed to. Surprisingly, the wireless charger started charging my pixel with a constant power of 4.5W. I have applied the same settings as before reinstallation, same case. I have no idea where this discrepancy comes from. I'm genuinely curious where this discrepancy could come from.

 

[cbomb1337]

Great job

 

[w_tapper]

Oh ok op I just tried it again this time using save and still nothing it's the same vibrations level. How do I get a log for you . I'm on p6.

I tried the clean slate companion aswell and it didn't help
View attachment 5791569

which rom is that? sorry for off-topic but I need those icons

 

[amritpal2489]

No, no support for beta firmware from my side. Please search the thread it's been answered multiple times.

Sweep to sleep does not cause any additional battery drain. The touchscreen is enabled anyway.
Same for the other features. It's negligible.

I appreciate you sharing your settings with the community, but the nightmare about missed notifications is you might not know, until it's way too late. Always tricky.



Adjusting vibration strength works fine on my end via the Cleanslate app. FKM does not support the endpoints.
Make sure to hit the save button in the CleanSlate config app, after enabling the setting and adjusting the override strength.

I read the previous replies in the forum... Thought some thing might have changed so was just confirming if the kernel works actually on QPR even if it is not supported

 

[livefc]

Hi everybody!
Tell me please, is that kernel solve the problem of battery drain in standby mode Pixel 6 pro (to 20% battery drain after night)?
If not, tell me please what will helps me (firmware, kernel, magisk module) if I have already tried disabling various standard features and optimizations in the android system (disabling 5G on 4G, battery optimization, etc.)

 

[linus207]

Hi everybody!
Tell me please, is that kernel solve the problem of battery drain in standby mode Pixel 6 pro (to 20% battery drain after night)?
If not, tell me please what will helps me (firmware, kernel, magisk module) if I have already tried disabling various standard features and optimizations in the android system (disabling 5G on 4G, battery optimization, etc.)

20% overnight? This looks pretty hardcore. Since you've tried everything, of course try this kernel, at worst it won't hurt your battery. However, it looks to me like you are in an area with poor cellular coverage. Maybe try turning on airplane mode at night. I'm curious about the results.