Development [Kernel][21.03.2023][Android 13.0.0]Kirisakura 1.0.0_Raviantah for Pixel 6/Pro aka "RAVIOLE"
- Thread starter Freak07
- Start date
I figured if it was widespread it would already be fixed. I will reflash the kernel and see. If it does keep happening anything I can do to try to pinpoint what the issue is? I only guessed it was kernel related due to it being fine on the previous kernel version.
Running this on ricedroid 10 beta and I don't have issues with YouTube videos
Ignore me. I downgraded to 4.4.0 then reflashed 4.4.1 and it fixed it. Sorry.
Off topic: pixel 6 here, i installed a gms doze magisk modules & uninstalled it, sometimes i receive notifications as a bulk at once when i switch from mobile data to wifi & vice versa, now on since yesterday im only receiving whatsapp notifications, i dirty flashed jan. Firmware image but nothing changed, cleared gms & google apps data but also nothing (sometimes after clearing google app data notifications arrive then stops again)
Im sorry i know its off topic but if anyone have any tip on how to fix this, thanks
Im sorry i know its off topic but if anyone have any tip on how to fix this, thanks
If you know this is completely off topic why not open a new thread with a question tag and just describe your problem there?
Or post in the XDA thread of that module. Maybe it's something that happens regularly.
I'm pretty sure if somebody is aware of that problem, you'll find better help there.
(I don't have any suggestion on how to help you other than staying away from all mods that alter background behaviour, doze behaviour, notification, etc etc. as problems like this are usually what's going to occur.)
This just clutters up the thread here and may confuse (inexperienced) users reading or searching through the thread. This thread is really not the place to start a discussion about that topic.
Thanks for your understanding!
As already pointed out you should have searched with the keyword "doze" rather than post here....
If you had you might have arrived here:
[MODULE] Universal GMS Doze
Universal GMS Doze Overview: - Optimized and adjusted Google Play services. - Support API 23 or later. - Support Magisk Live or Custom Recovery installations. Contents: - Base extensions module: 1.8.4 (0830) code: 184 Credits: - @topjohnwu /...
forum.xda-developers.com
This is the most commonly installed and original GMS Doze module, in the troubleshooting section (2nd post) you may find an answer specifically to *try* and address your issue. And i say try as i have been involved in that thread since early on and some people still never resolve the delayed messages issue despite the fix suggested in the 2nd post. I have my own GMS Doze module based on the earliest method (doesnt try and so as much as the others) and it does the "fix" on install....and i still wont gaurantee it wont have the same issues, anytime you mess with google services, theres a risk...
Goes without saying, hopefully, if you have issues after this, please find the correct place to raise them....
Installed & uninstalled the modules & still no notifications, ran (dumpsys deviceidle disable) still also no notificationsAs already pointed out you should have searched with the keyword "doze" rather than post here....
If you had you might have arrived here:
[MODULE] Universal GMS Doze
Universal GMS Doze Overview: - Optimized and adjusted Google Play services. - Support API 23 or later. - Support Magisk Live or Custom Recovery installations. Contents: - Base extensions module: 1.8.4 (0830) code: 184 Credits: - @topjohnwu /...
This is the most commonly installed and original GMS Doze module, in the troubleshooting section (2nd post) you may find an answer specifically to *try* and address your issue. And i say try as i have been involved in that thread since early on and some people still never resolve the delayed messages issue despite the fix suggested in the 2nd post. I have my own GMS Doze module based on the earliest method (doesnt try and so as much as the others) and it does the "fix" on install....and i still wont gaurantee it wont have the same issues, anytime you mess with google services, theres a risk...
Goes without saying, hopefully, if you have issues after this, please find the correct place to raise them....
umm, youve been warned twice now to please post in the applicable thread. I even tried to give you a direct link to where that would be along with some troubleshooting steps (the one you quoted wasnt even the one related to what you reported, you only needed to read a bit further down), and even an alternative, not to mention the direct warning that even with the best Doze module some people will still have issues....if youre still having issues, backup (something like Migrate (v4) and the way ive used it forever might help shorten the procedure)) and factory reset, and restore, problem solved, plenty of people before you (me included) have had to do it...you'll often spend more time trying to find some obscure workaround than you will fixing it the 100% way...i dont like to enable this behaviour, so this will be the last reply from me on the subject, here or elsewhere...
Please take another friendly hint....and dont post OT here again
Last edited:
Fantastic Work Sir! @Freak07 I do believe you've supplied every pixel and even the OP7TProNR McLaren I recently owned. I ditched Google for another year+ because my OGP1 Marlin suffered hardware failure and then my 4XL splder to lifted from battery plug and scattered solder like missiles lol.
ANYWAYS For anyone On the January Bliss 6.3 from yet another fine Dev who I completely ignore at times (sorry doode) @stebomurkn420 . This kernel will not flash as OP states. However instead of using the Bliss January ASB boot.img use the TQ1A.230105.001.A2 boot.img patched with Magisk. You can then flash this Mona-Lisa-Linux kernel and keep root.
That is all. GoodDay & Happy 2023!
🪬
ANYWAYS For anyone On the January Bliss 6.3 from yet another fine Dev who I completely ignore at times (sorry doode) @stebomurkn420 . This kernel will not flash as OP states. However instead of using the Bliss January ASB boot.img use the TQ1A.230105.001.A2 boot.img patched with Magisk. You can then flash this Mona-Lisa-Linux kernel and keep root.
That is all. GoodDay & Happy 2023!
🪬
Is it possible to force enable DP Alt Mode using this for the Pixel 6 Pro? Trying to find a way to achieve this, this seems like the most promising thing so far.
Update: Read through the thread, someone asked this before, for those googling: No, this doesn't fix DP Alt Mode as apparently there are hard links to display firmware and other BS (thanks Google). Damn.
Update: Read through the thread, someone asked this before, for those googling: No, this doesn't fix DP Alt Mode as apparently there are hard links to display firmware and other BS (thanks Google). Damn.
Last edited:
Hello, friends!
Does anyone know why the app's markup can't edit the screenshot?
On the stock core Google application markup works correctly.help me!!!
Does anyone know why the app's markup can't edit the screenshot?
On the stock core Google application markup works correctly.help me!!!
My Device fails to boot back to system every time i try flashing the Kernel on Evolution X rom. It ends up going back to bootloader.
Device: Pixel 6 Pro.
Rom Build: Jan Build.
Kernel buidl: 4.4.1.
Device: Pixel 6 Pro.
Rom Build: Jan Build.
Kernel buidl: 4.4.1.
I had this problem when switching to Evo and Kiri. 4th try it worked. Flashed and booted Evo, then patched boot.img from Evo and flashed it. After that i could flash Kiri.
You have to use a payload dumper to dump the boot.img and then patch it with Magisk
Yes' i'm using version 4.4.1 with the February update on a Pixel 6 pro
hello
The default tcp algorithm is BBR but the default qdisc is not fq. This is intended ?
I thought BBR needs pacing and it's recommended to use fq with pacing enabled.
(https://github.com/freak07/Kirisakura_Raviole/blob/master_tp1a_2208/net/ipv4/tcp_bbr.c Line 55)
I never had network issues I was just wondering.
Also thank you for your work @Freak07 the kernel is fantastic.
The default tcp algorithm is BBR but the default qdisc is not fq. This is intended ?
I thought BBR needs pacing and it's recommended to use fq with pacing enabled.
(https://github.com/freak07/Kirisakura_Raviole/blob/master_tp1a_2208/net/ipv4/tcp_bbr.c Line 55)
I never had network issues I was just wondering.
Also thank you for your work @Freak07 the kernel is fantastic.
Top Liked Posts
-
1
What kernel manager?@Freak07 - Updated to latest Lineage (which i believe contains the latest March 23 update) on my Pixel 6:-
LineageOS Downloads
download.lineageos.org
But receive the following error when flashing (im flashing for the first time and currently have stock LineageOS Kernal installed which is pre rooted using Magisk 'delta':-
Kernel Flasher just exits when i attempt to begin flashing this Kernel -
32Update to Raviantha 1.0.0
Hey guys and girls,
So here´s the next release for stable March firmware, which is now QPR2 based. This results in quite a lot of changes and improvements in the vendor specific drivers!
Aside from that as already hinted at in the Pixel 7/Pro release for March google kind of unified the main kernel tree for the Pixel 6 and Pixel 7 series. That means I´m now able to compile the release for Pixel 6 and Pixel 7 from the same main kernel tree after some modifications to my own changes! This saves me a bit of time and means all not vendor/firmware/hardware specific improvements added to the kernel are now shared automatically, without me constantly merging them back and forth.
Hence the name change and starting from 1.0.0 again. Pixel 6 Oriole/Pixel 6 Pro Raven combined are Raviole, Pixel 7 Panther/Pixel 7 Pro Cheetah combined are Pantah, so Raviantha is the combination of both Raviole and Pantah.
Please note there are still separate zips due to the powerhal being different and the ramdisk in vendor_boot not being exactly identical.
As part of this development all improvements from the linked pixel 7 release found its way into this release plus a few more. So this time you guys are the first.
Short explanation follows below.
Please note that this release is not for the QPR Beta firmware, but the stable android 13 march firmware!
Please make sure to not use magisk canary 25210. It breaks module loading and causes a lot of issues! Please use either stable canary or canary 25206.
Latest platform tools have issues flashing super.img, please use platform tools 33.0.3!
Maple Tree / Per VMA-locks via Maple Tree in RCU-Mode
Updated this patchset to a new refined version that´s currently been tested.
Bit of a graph that shows app launch times with and without this patchset:
Link to the graph can be found here.
Explanation of the patchset in hide tags below!
Linux 6.1 finally merged the Maple Tree patchset. I had my eyes on that patchset for quite a while now. I backported it a few months ago (back in november iirc) but at that time I still ran into a few problems with it so it never made it into a release on XDA.
However after discovering work done on per vma-locks, which builds directly on the benefits that maple-tree provides interest was sparked again. Decided to pull it in again and fix the remaining issues.
If you´re interested in details read the linked topics.
Basically those patches reduce app launch time as well as lock contention. Additionally per vma-locks directly utilizes lazy-rcu, which was backported in 1.1.0. Usually I´m very hesitant when it comes to kernel changes actually translating to real world power consumption improvements, but lazy-rcu is one of the few patchsets that translate to a small improvement for everyone regardless of the usage.
So the new per VMA-lock patchset directly benefits from the previous backport of lazy-rcu.
Improve Uclamp
Improve uclamp patchset and detect capacity inversion. This greatly reduces the few missed frames we had.
Camera Launch Speed
Speed Up Camera launch by quite a bit. Also improve animations around camera compared to stock kernel.
There are other small improvements as well. Please check my github for those.
The kernel is made for stable A13 firmware, not beta.
I wish everyone a nice day.
Changelog:
- Linux-Stable bumped to 5.10.175 containing tons of stability and security fixes
- kernel is now built with latest clang 17.0.0 prebuilt from google
- Update Per VMA-locks patchset from previous release (this benefits greatly from lazy rcu!)
- improvements to MGLRU
- bump f2fs to latest f2f2 stable state
- improvements to the scheduler
- improvements to uclamp, prevent capacity inversion (reduce missed frames)
- greatly speed up camera launch time!
- ported improvements from QPR3 beta
- fixes/improvements to to memory management
- security fixes/ improvements from kernel/common
- optimize code around nr_cpus from latest linux
- other fixes please check github
- fixes/improvements to to memory management
- security fixes/ improvements from kernel/common
- other fixes please check github
Download:
Attached to release post as AFH is currently down.
Make sure to not delete and keep the powerhint ak3 module installed via Magisk Manager after flashing!
If you´re coming from another kernel restore stock boot.img, dtbo.img, vendor_boot.img and vendor_dlkm.img before flashing or simply dirty flash. Thank you.
Make sure to meet the requirements and read the OP as well as the FAQ before flashing.
I wish everybody a great day/evening!
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak077
thanks, I missed that before.
I can see the problem. Should be adressed in the next release.44
I saw it too. Seems it’s fixed on the qpr beta though. So it might be fixed in a few days when march update drops.
I’m not sure it’s related to kernel anyway. It’s also not a hard but a soft reboot. -
119Kirisakura-Kernel for the Pixel 6/Pro
Hello everyone,
To keep it short: Here is Kirisakura - Kernel for the Google Pixel 6 Pro aka Raven and the Pixel 6 aka Oriole, together Raviole.
I would appreciate if everybody that flashes the kernel, reads at least once through this opening post and the following ones.
The kernel aims to keep most of the subsystems updated, way ahead of the stock kernel, thereby improving security, stability and performance!
This includes Linux-Stable, F2FS-Stable and kernel/common!
If that got you curious, have a read about linux-stable and why it is important here. The stable-process is not the same for every subsystem, but the general idea, rule of thumb and benefits are applicable for other subsystems as well.
The kernel includes a lot of improvements and contributions from other developers as well. Without this kernel would not exist.
A big part of improvements originate from @arter97´s, @kdrag0n´s and @Sultanxda´s work. Many others contributed in some way or another to this kernel.
A big thanks to all of them at this place!
Now lets continue with a list of features in the next paragraph!
Features:
Main Features:
- Based on latest A13 kernel sources from Google, Kernel is made for Android 13
- Linux-Stable-Upstream included to 5.10.170
- Compiled with prebuilt Google clang 17.0.0
- Backport entire RCU subsystem to Linux 6.0
- Lazy RCU which should result in power-savings while the device is lightly-loaded or idling, more information here
- Backport Maple tree from Linux 6.1
- Per VMA-locks in conjunction with Maple Tree RCU-Mode (improve app launch time, this feature in general benefits greatly from lazy rcu!)
- FHD Support for Pixel 6 Pro (display is able to run at 1080p), more info here and here
- merged kernel/common (improvements to android-common-kernel straight from google)
- MM subsystem reworked (more info and some patchsets linked in this post)
- Multi-gen LRU backported/reworked and enabled (more info here, here as well and here) to improve mm and reduce cpu cycles, latest V15 state
- improvements to uclamp, prevent capacity inversion (reduce missed frames)
- greatly speed up camera launch time!
- Utilize an additional kswapd thread to increase throughput for memory reclaim
- pelt multiplier tied into powerhal to speed up scheduler during interaction (more info here)
- prevent frequency spikes caused by small transient tasks when the device is idle(more info here)
- tie mechanism to prevent frequency spikes caused by small tasks also into powerhal
- scheduler improvements for RT (realtime) tasks
- introduce and setup PMU limiter (prevents CPU from spiking to max when it isn´t needed, based on PMU reads, more information here)
- improve camera performance by tuning the powerhal during recording
- bias tasks of rt, sf and ta groups to prefer high capacity cpus during app launches, interactions
- improve app launches via powerhal
- improve trusty driver performance which connects to fingerprintscanner-hal by using high perf wq during fp unlock
- restrict maximum CPU-Freqs during screen off/ idle to 1.1GHZ for all clusters to save power
- introduce unfair f2fs rwsems to prevent writer starvation and improve IO perf under heavy load
- fuse: give wakeup hints to scheduler to speed up compress/decompress in internal storage (details)
- enable RCU_BOOST (details here), also fix RCU_BOOST behaviour
- F2FS-Stable updated
- merge and enable f2fs block_age-based extent cache (improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates)
- TCP backports from mainline
- SSG IO scheduler for reduced overhead and less CPU cycles (more lightweight and android optimized)
- Scheduler updates from linux-main
- use improved energy model for exynos cpu cooling/thermal control
- allow GPU to scale down to 150mhz, but boost to higher value in case of interaction via powerhal
- affine IRQS to CPU 7 during camera usage for improved performance as it tends to overload the little cores
- use bbr as default TCP congestion algorithm (fasted algo according to this excellent research from @kdrag0n found here )
- include bbrv2 from google, more info here
- Enable support for TTL spoofing
- Include LRNG, see here and here for more info, bump to v45 with 3.0.0
- important patches from kernel/common for 5.10 (here are more details)
- CleanSlate Features from @tbalden, big applause here! (s2s, notification booster, battery saver, flashlight notifications. Please note: cleanslate features that work otherwise with rooted devices like kadaway (adblocking) are not implemented on this kernel since I´m running rooted)
- dirty pipe exploit fixed
- supports direct usb access for hi-res playback over USB-C DACs
- improve ZRAM usage
- flashing the kernel will preserve root
Various Optimizations:
- update several drivers to use power efficient workingqueues (for example wlan driver)
- kernfs: use buffer from the stack space
- printk: use buffer from the stack space
- kthread: use buffer from the stack space
- bpf: avoid dynamic memory allocation for small value buffers
- binder: Reserve caches for small, high-frequency memory allocations
- kernfs: use kmem_cache pool for struct kernfs_open_node/file
- cgroup: use kmem_cache pool for struct cgrp_cset_link
- f2fs: reduce timeout for uncongestion
- f2fs: Demote GC thread to idle scheduler class
- f2fs: set ioprio of GC kthread to idle
- mm: vmstat: use power efficient workingqueues
Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
AK3 Helper Module:
- restrict little cluster to 1,19ghz mid cluster to 1,19ghz and big cluster to 1,1ghz during screen off, to reduce battery usage for example during music playback
- only use little cores during screen off/device suspend
- tie pelt multiplier into the powerhal (more info here)
- prevent frequency spikes caused by small transient tasks during idle operation (more info here)
- boost scheduler using the pelt multiplier during fingerprint unlock operation
- setup and control PMU limiter via powerhal (more info here)
- dynamically adjust target load for memory interface during interaction
- boost memory interface controller during interaction (decreased missed frames, improved soc efficiency according to google docs)
DOWNLOAD:
Download is always located in this folder:
4.2.0, 4.3.0, 4.4.0, 4.4.1, 4.4.2 are attached to the release posts linked below as AFH is wonky at the moment.
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...www.androidfilehost.com
Changelog:
Android 12.0.0
1.0.0 Initial Release
1.0.2 https://forum.xda-developers.com/t/...r-pixel-6-pro-aka-raven.4358435/post-85910621
1.0.5 https://forum.xda-developers.com/t/...r-pixel-6-pro-aka-raven.4358435/post-85924419
1.3.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-85976139
1.4.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86109665
1.5.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86259863
1.7.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86390563
1.8.4 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86541727
Android 12.1.0 Stable (March feature drop and more recent)
2.0.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86617873
2.0.1 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86637233
2.1.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86695911
2.3.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86821331
2.4.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86834981
Android 12.1.0 Stable (June feature drop and more recent)
3.0.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86992705
3.0.1 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86996237
3.0.17 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87127695
Android 13.0.0 Stable (not QPR beta!)
4.1.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87290247
4.1.6 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87399635
4.2.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87524609
4.3.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87697425
4.4.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87823333
4.4.1 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-87944879
4.4.2 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-88118201
Raviantha 1.0.0 https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-88316223
Android 12L QPR Beta - Deprecated
Build for Android 12 QPR Beta: https://forum.xda-developers.com/t/...pixel-6-pro-aka-raviole.4358435/post-86857033
Requirements
- the kernel is made for the stock firmware provided by Google, pay attention to flash a kernel release matching the firmware (flashing on custom roms might work, but you may need workarounds!)
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment so you can flash back to stock in case something goes wrong
- working magisk environment (a device rooted with latest magisk stable in case you want to be absolutely safe)
- IMPORTANT: Unrelated to the kernel, but update both slots of your phone to A13! (take a look here)
How to flash the Kernel:
1a. Make sure you tick all the requirements above
1. Download the correct kernel.zip depending on your device (Pixel 6 = oriole || Pixel 6 Pro = raven)
2. Flash the correct kernel.zip via EXKM, FKM or kernel flasher. Root will be preserved. The AK3 magisk helper module will be automatically installed during flashing the kernel.zip and be present on next reboot.
Do not remove or disable the AK3 Magisk Helper Module otherwise the device will bootloop.
3. Reboot and profit.
Manual installation is no longer supported starting with release 3.0.0, as there´s a free open-source option to flash kernel.zips now.
Instead use the free kernel flasher, which can be found here.
Manual installation without relying on paid apps like fkm/exkm:
Please have a look at the linked post.
Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee/tea/beer
If you like my work: http://paypal.me/freak07
Credits:
@osm0sis for all his work on AK3.
@tbalden for being the best HTC, Pixel, OnePlus and Asus wingman!
@capntrips for all his work on the pixel 6!
@LeeDroid and @mwilky for their awesome roms and work I used on multiple devices!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me in the past!
@arter97 for giving me advice
@kdrag0n for his help and advices!
@topjohnwu for magisk and his entire work!
Source Code: https://github.com/freak0744Update to 4.1.0
Hey guys and girls,
I hope everyone started into a good week. Here´s the next release. It´s for stable Android 13.
Thanks to Google releasing the kernel source for the previews and the betas I´m able to push this update out very quickly. As in the past, the code didn´t change between last beta and stable release.
There are again a lot of changes in this release. I´ll try to keep the release post short as I don´t have that much time lately.
FHD/1080P Support for Pixel 6 Pro
The biggest change is FHD support for the Pixel 6 Pro. If you follow twitter you might have seen this tweet from @MishaalRahman.
Instead of using the display driver that´s supposedly for the Pixel 7 Pro, FHD support was added to the Pixel 6 Pro display driver. There were a few obstacles to make it run properly on the Pixel 6 Pro, but I got it working nicely so far. If anyone has more experience than me regarding panel timings, display drivers etc, feel free to push any improvement as a pull request to my github or point me towards any improvement.
As a result you can now select 1080p resolution from settings after flashing the kernel. Dynamic refresh rate works, brightness scaling works, no tints, colour shifts or contrast issues either. AOD has a 1080p Low-Power timing as well.
You´ll find a few more infos with a short video on my tweet here:
It´s perfectly usable on a daily basis so far. I ran it for a few days without issues on my end. While the advantage might be debatable (saving battery, less load on GPU, still needing to drive the same amount of pixels in the end even on lower resolution, etc etc) having options is nice and this is why I decided to ship it.
Apps need to redraw after switching resolution, sometimes 1080p on big display size selected in settings the UI looks a bit sketchy. So I think Google is still working on that.
There´s however one bug I found so far that makes me believe this is still very much a WIP from google. If having the "show current refresh rate" option from dev settings enabled while switching resolutions, the display will black out and a restart needs to be forced by keeping the power button pressed or using adb interface to restart the phone. This is not due to the kernel, but display settings in framework getting scrambled as it´s not yet implemented 100% on googles end. So be warned.
MM Subsystem Rework
MM subsystem was completely reworked including many improvements from linux-mainline. During this MGLRU was also reworked a bit and works better now. I´ll include links to a few of the improvements/patchsets in hide-tags below, if you´re interested beyond that please check out my github.
links:
Additionally tie in a few of the MM changes into the powerhal. For example Proactive compaction is more aggressive during screen-off/device suspended operations to improve long term-performance.
Other changes:
Also tune the powerhal and implement all A13 changes, according to the changes that were already present on A12.
Latest changes from f2fs-stable are included, which include several bugfixes and small improvements.
Binder improvments/fixes, scheduler improvements from kernel/common, performance for exfat formatted storage device improved (niche use case, but still nice) and other little improvements.
For other changes and details please take a look at github.
I wish everyone a nice day.
If you´re one of the unfortunate ones that suffer from the device is corrupt bug on pixel 6 series please take a look at the FAQ at the beginning of this thread it contains a solution. The issue is probably caused by a bug that affects pixel 6 devices and has nothing to do with magisk or a kernel, it just happens to get triggered when using any of those.
Changelog:
- Rebase kernel fully on A13 trees
- Linux-Stable bumped to 5.10.136
- FHD/1080p support for Pixel 6 Pro
- all previous features and improvements kept intact
- bump f2fs-stable to latest available
- rework mm subsystem (check git for more details)
- scheduler improvements
- binder improvements from kernel/common
- improve exfat performance (if someones uses exfat formatted devices)
- loads of other changes from kernel/common
- update powerhal to account for a13 changes and port existing changes over
- loads of other changes, please check github
Download:
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...
If you´re coming from another kernel restore stock boot.img, dtbo.img, vendor_boot.img and vendor_dlkm.img before flashing. Thank you.
I wish everybody a great day/evening!
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak0743Update to 4.2.0
Hey guys and girls,
I hope everyone started well in the new week. Here´s the next release and it´s a rather big one with lots of under the hood improvements.
We already had all the changes in from the October security patch release released, due to merging linux-stable stable and kernel/common in advance.
The kernel is now at 5.10.146 way ahead of the stock kernel. To further emphasize the importance of this. About 90% of kernel security issues are solved in linux stable. While I didn´t check the actual number myself, I´d have estimated about the same (80-90%) before actually reading the slides from @arter97 presentation.
What also needs to be kept in mind is that a big part of those security issues are resolved in linux-stable sometimes months ago before those patches end up in a monthly security patch. Additionally to that the security patches are about 3 months behind the discovery of those vulnerabilities.
Amongst linux-stable upstream there are a few other not minor updates in this kernel.
Clang
The kernel is now compiled with the latest prebuilt Clang from Google. This was quite a journey as this is a pretty big update to clang. This is quite experimental to be on googles side of a "bleeding" edge compiler, but after fixing several issues that originated from the new compiler it ran stable for over 2 weeks.
There´s a potential for CFI failures that originates from that new Clang rather than a "real attack", due to the changes in clang.
Short reminder what CFI actually does: Control flow integrity (CFI) is a security mechanism that disallows changes to the original control flow graph of a compiled binary, making it significantly harder to perform such attacks.
A typical crash (that´s not wanted and originates from compiler changes rather than an actual attack, which is already resolved of course ) would look like the following: Open camera app, due to compiler changes CFI is accidentally tripped every time this code is executed.
I think we catched all of these newly CFI failures and everything is nice and stable. In case you discover such a behaviour please send me the contents of sys/fs/pstore, once the phone booted back up.
There´s always the possibility of a "real" attack in which CFI will crash the phone, before the attacker can compromise the phone. That´s why keeping subsystems updated is important.
Powerhal
The powerhal was retuned due to changes to the scheduler introduced. It should work even better now, regarding efficiency and performance. Of course I try to tune it also to my personal needs, while trying to keep it working for all workloads. The changes are not drastic, so please don´t post after several hours you see drastic differences.
Other improvements
Several other improvements from kernel/common (for higher branches than 5.10) and linux-main were backported to this branch so we can benefit from those improvements. For details please check my git.
I´d like to write all of this with more detail, but at the moment I lack the time to do so.
Kernel is compiled for stable A13, not A13 QPR Beta!
I wish everyone a nice day.
If you´re one of the unfortunate ones that suffer from the device is corrupt bug on pixel 6 series please take a look at the FAQ at the beginning of this thread it contains a solution. The issue is probably caused by a bug that affects pixel 6 devices and has nothing to do with magisk or a kernel, it just happens to get triggered when using any of those.
Changelog:
- Linux-Stable bumped to 5.10.146
- kernel is compiled with latest prebuilt google clang 15.0.2
- improvements from linux-mainline
- locking subsystem
- memory management
- more details please check github
- updates from kernel/common to several subsystems
- tweak powerhal for improved performance/efficiency
Download:
Attached to release post as AFH is currently down.
I´ll push to AFH once it´s back up.
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...
If you´re coming from another kernel restore stock boot.img, dtbo.img, vendor_boot.img and vendor_dlkm.img before flashing. Thank you.
I wish everybody a great day/evening!
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak0737Update to 1.8.4
Hey guys and girls,
So here´s the next update. It´s kind of an off schedule update, as I planned to update the kernel with the next security update/feature drop.
But in the light of recent events regarding the new exploit called "Dirty Pipe" (more info here), which is similar to the "Dirty Cow" exploit from a while ago, but easier to exploit this time, I decided to release an update ahead of schedule.
This exploit was fixed in linux-stable 5.10.102, as opposed to a single commit in AKC (android kernel common, commit here). This shows once more why merging linux-stable is beneficial as explained in detail in the OP.
Since one of the key aspects of this kernel is security and staying on par with upstream (which often fixes exploits way ahead of android security bulletin updates, even before an exploit is even known or fixed via a patch on the security bulletin) I decided to release this update as quickly as possible, so this exploit is fixed on devices running this kernel.
Several other notable improvements and changes in this release:
Bring in scheduler updates from Android 13 Developer Preview, which aim at improving task placement. (adjust powerhal accordingly)
BFQ IO-Sched is now on par with linux-mainline.
Several fixes to mm subsystem, f2fs and others.
Several other improvements are included as well. More details in the changelog.
Download is below.
Updated instructions in the OP!
Changelog:
- linux-stable 5.10.103
- contains fix for the dirty pipe exploit
- built with clang 14.0.2 prebuilt by google
- improvments from kernel/common
- fix memory leaks
- security related patches
- mm improvments
- f2fs fixes
- scheduler fixes
- for details please check github
- built with improvements from A13 Dev Preview to display driver
- other changes please look at my github
Download:
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...
Instructions can be found in the OP! Please follow the instructions to avoid any issues.
If you´re coming from another kernel restore stock boot.img, dtbo.img, vendor_boot.img and vendor_dlkm.img before flashing. Thank you.37Update to 1.7.0
Hey guys and girls,
So here´s the next update. It includes the february security update. Most of the changes brought by the February kernel source drop, were already included in this kernel by merging kernel/common and linux-stable.
Several other notable improvements and changes in this release:
Improve f2fs performance by merging a patchset to prevent writer starvation for the checkpoint thread. This was discussed this month in the f2fs mailing list and is already merged to the kernel/common tree. It´ll improve performance under heavy I/O utilization.
You can find more information following the discussion here.
Necessary backports were brought to the kernel and the platform specific f2fs-implementation was also adjusted.
Latest f2fs-stable was also merged to the kernel.
Update the patchset to prevent frequency spikes caused by small tasks as well. Tie those new changes into the powerhal. (That means users not flashing the kernel.zip, but instead use the manual installation method, which are only a handful from the download count, need to flash the updated magisk helper module. Users that flash the kernel.zip via FKM/EXKM have to just flash and forget)
Several other improvements are included as well. More details in the changelog.
Download is below.
Updated instructions in the OP!
Changelog:
- February Security update merged
- linux-stable 5.10.96
- include latest f2fs-stable
- improvments from kernel/common
- fix memory leaks
- security related patches
- mm improvments
- for details please check github
- introduce unfair f2fs rwsems to prevent writer starvation and improve IO perf
- update patchset to prevent freq spikes caused by small transient tasks (also tie this into powerhal)
- give pelt multiplier power hint for scheduler performance boost during fingerprint unlock
- fuse: give wakeup hints to scheduler to speed up compress/decompress in internal storage (details)
- enable RCU_BOOST (details here), also fix RCU_BOOST behaviour
- update LRNG implementation (thanks to arter97 )
- improvements/fixes for CleanSlate features
- other changes please look at my github
Download:
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...
Instructions can be found in the OP! Please follow the instructions to avoid any issues.
If you´re coming from another kernel restore stock boot.img, dtbo.img, vendor_boot.img and vendor_dlkm.img before flashing. Thank you.
