[Kernel][21.08.2021][4.14.243][Android 11] Kirisakura 1.3.9_R for OP7/Pro aka Guacamole
- Thread starter Freak07
- Start date
Kirisakura_Companion_OP7_Q_V4.zip | by Freak07 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
Works for me
Attached for convenience.
And there is the same module for 7t 11 oxygenKirisakura_Companion_OP7_Q_V4.zip | by Freak07 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.androidfilehost.com
Works for me
Attached for convenience.
Android 11 doesn't require a module. It's included in the kernel.zip for A11 release.
I installed this kernel on a lineageos-microg build with Magisk. The module does not appear in Magisk. The fingerprint works sometimes. I mainly installed the kernel to have USB-C Ethernet support. Is this only meant for OOS?
All kernels aren't modules, they need to be flashed with twrp or app like Franco Kernel Manager or Ex Kernel Manager.
This kerne was made for Oxygen but can work on some custom.
I am pretty sure that I saw the OP mention that the newer zips have the module built in. I am just saying that when I flashed it, no module showed up in Magisk and stated a problem that I was having. I then wondered if it was designed to work on AOSP as well or only OOS.
Yes, sorry, I didn't state which file.
It is 1.3.9_R via adb sideload using the lineageos recovery. Since I am using microg, I wouldn't use Franco KM or EXKM. My experience with TWRP since A11 has been annoying so I stick to sideloading, which was never a problem for ROMs or modules.
Currently, I have noticed that the USB-C Ethernet connection disconnects after 5-10 minutes, removing the cable and re-inserting it does not restore the connection and only a reboot will until it disconnects again.
Data takes a long time to connect.
The fingerprint sensor notices there is a touch but most of the time doesn't recognize my print. It will either say that I moved it too quickly or say "Not Recognized". When I try to register another print, thinking it may just need re-registering, that fails 100%.
In a few cases, the phone would rotate into landscape by just opening an app. This never came back after I rebooted.
What are the best ways to capture logs for these problems?
The install of my microg is very clean and there is nothing dirty about it.
Data takes a long time to connect.
The fingerprint sensor notices there is a touch but most of the time doesn't recognize my print. It will either say that I moved it too quickly or say "Not Recognized". When I try to register another print, thinking it may just need re-registering, that fails 100%.
In a few cases, the phone would rotate into landscape by just opening an app. This never came back after I rebooted.
What are the best ways to capture logs for these problems?
The install of my microg is very clean and there is nothing dirty about it.
Last edited:
there should be a module called AK3 Helper Module in Magisk Manager after flashing that kernel.
I never tried sideloading via lineage recovery. It might not work there, but I´m not sure. However I attach a zip with the ak3-kernel.zip updated, to ensure it´s not me missing some backend updates, that might fix this.
As you previously hinted at, the kernel is primarily made for OOS. There are some issues on custom roms, that are just there like the fingerprint scanner issue. I replied to this topic a while ago:
[Kernel][21.08.2021][4.14.243][Android 11] Kirisakura 1.3.9_R for OP7/Pro aka Guacamole
Kirisakura-Kernel for the One Plus 7 Pro Hello everyone, Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day! This...
forum.xda-developers.com
Rotating shouldn´t be handled by the kernel, so that issue is most likely not related to the kernel.
About the USB-C Ethernet connection. You can try to gather a logcat as well as a dmesg the exact moment the issue happens. And then do the same when you try to reconnect but it doesn´t restore the connection.
However I think it´s difficult to run this kernel as a daily driver on custom roms, so I also understand if you just look elsewhere.
I will give the updated version attached a try.there should be a module called AK3 Helper Module in Magisk Manager after flashing that kernel.
I never tried sideloading via lineage recovery. It might not work there, but I´m not sure. However I attach a zip with the ak3-kernel.zip updated, to ensure it´s not me missing some backend updates, that might fix this.
As you previously hinted at, the kernel is primarily made for OOS. There are some issues on custom roms, that are just there like the fingerprint scanner issue. I replied to this topic a while ago:
[Kernel][21.08.2021][4.14.243][Android 11] Kirisakura 1.3.9_R for OP7/Pro aka Guacamole
Kirisakura-Kernel for the One Plus 7 Pro Hello everyone, Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day! This...
Rotating shouldn´t be handled by the kernel, so that issue is most likely not related to the kernel.
About the USB-C Ethernet connection. You can try to gather a logcat as well as a dmesg the exact moment the issue happens. And then do the same when you try to reconnect but it doesn´t restore the connection.
However I think it´s difficult to run this kernel as a daily driver on custom roms, so I also understand if you just look elsewhere.
Edit: I installed the updated zip, no indication of a new module in magisk.
The screen rotation had disappeared after the reboot but I cannot say that it has something to do with the sensors because my sensors were turned off. As soon as I close the app, the rotation went back to portrait. Would the ak3-kernel be copied to a root folder? Maybe I can manually install it?
Last edited:
I'm loving this kernel so far but I'm having a strange issue where a usb-c to headphone + usb-c charging addaptor would refuse to charge and play audio through the headphones at the same time.
I have a feeling it's a driver issue. I'd be happy to supply a testing unit if needed but I've been strugling with this for well over a month now with no success. I'm pretty sure it's a bug somewhere in the kernel but it could also be an issue with OOS itself as I have not tried any other roms yet...
Sorry if I'm asking for too much. thanks.
I have a feeling it's a driver issue. I'd be happy to supply a testing unit if needed but I've been strugling with this for well over a month now with no success. I'm pretty sure it's a bug somewhere in the kernel but it could also be an issue with OOS itself as I have not tried any other roms yet...
Sorry if I'm asking for too much. thanks.
Hello. I have a little problem compiling your kernel. Can you please help me
github.com
Compilation error · Issue #3 · freak07/Kirisakura_OP7Pro_A11
DTC arch/arm64/boot/dts/qcom/sm8150-sdxprairie-v2-mtp-overlay.dtbo DTC arch/arm64/boot/dts/qcom/sm8150-sdxprairie-v3-mtp-overlay.dtbo DTBOIMG arch/arm64/boot/dtbo.img make[5]: /bin/sh: Argument lis...
github.com
I'm using this kernel on OOS11. I'm glad there are no updates on a regulare base. It means you're working with a finished product that's good as it is.
security patches are always necessary. So update does not mean it is unfinished or incomplete
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
4
Why would I recommend to disable it when it's automatically created during flashing the zip and it's written in several places in the first post to not delete it?
It makes non-pro devices work correctly as OnePlus uses ugly hacks, otherwise proximity sensor or others are broken.
It sets up some kernel settings so the changes included get applied correctly and are used at all.
It adjusts the powerhal to actually make use of several changes included in the kernel. Which otherwise end up completely unused.2
Flash apk of magisk 24 with latest twrp then start system and open magisk, sure it will set specific file and auto reboot, then reopen magisk, go to settings and enable Zygisk, reboot, open magisk go to settings, configure deny list showing system apps from 3 dots at bottom right, select gms and unstable under Google play services, select vending under Google PlayStore, now return to settings and select apply deny list, hide magisk, it will be called Settings. Now download from PlayStore a safety net verify app and try, to be sure all work reboot and open app to verify safety net.2
That I know the module help the kernel to work at the best settings, never need to factory reset after a kernel flash.1
This kernel have specific module that tweak settings to make it working properly.1
Thank you so much to make it clear. Respect!Why would I recommend to disable it when it's automatically created during flashing the zip and it's written in several places in the first post to not delete it?
It makes non-pro devices work correctly as OnePlus uses ugly hacks, otherwise proximity sensor or others are broken.
It sets up some kernel settings so the changes included actually get applied correctly.
It adjusts the powerhal to actually make use of several changes included in the kernel. -
135Kirisakura-Kernel for the One Plus 7 Pro
Hello everyone,
Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
This project aims to keep most of the subsystems updated, way ahead of the stock kernel, thereby improving security and performance, while keeping stability as the foucs during testing! This includes Linux-Stable, CAF-Upstream and kernel/common.
Kernel Control Flow Integrity (Kernel-CFI), which is achieved by linking the kernel with LLD and Link Time Optimization (LTO), more precisely ThinLTO, are quite unique security features.
The only kernels made by OEMs offering this security feature by default are the ones for the Pixel 3, 4 and 5 devices.
The recently released Kirisakura-Kernel for the OnePlus 8 Pro was featured on the XDA-Portal due to the inclusion of CFI. The featured article explains CFI in great details, is easy to understand and definitely worth to read.
If possible the latest Kirisakura-Kernel releases for various devices aim to include CFI in enforcing mode so users can benefit from this security features.
Another security feature is Shadow Call Stack (SCS). Similar to CFI, only the Pixel 3, 4 and 5 kernels use this security feature.
SCS is another security patchset that is aimed at preventing attacks via return oriented programming (ROP).
ROP is a technique where the attacker gains control of the kernel stack to overwrite function return addresses and redirect execution to carefully selected parts of existing kernel code.
If you´re interested here are a few good links:
Google Security Blog explaining SCS.
LLVM doc about SCS
Android DOCs documenting SCS
If reading about upstream in the paragraph above got you curious,have a read about Linux-Stable and why it is important here. The stable-process is not the same for every subsystem, but the general idea, rule of thumb and benefits are applicable for other subsystems as well.
Quick explanation of CAF-Upstream. CAF is short for Codeaurora-Forums. This is the place where development from Qualcomm for their SoCs happens. This includes the Snapdragon 855/+ that´s built into the different SKUs of the OP7/T/Pro.
The kernel-bases available on the Codeaurora-Forums, are basically the foundations OEMs use, to build their own kernel additions on top for devices featuring Qualcomm SoCs.
The Qualcomm developers push regular updates to the bases of the different SoCs, a bit similar to how Linux-Upstream works. Most OEMs usually stop updating the initial base after the phone is released, and only cherry-pick certain commits to be in line with the android security bulletin.
This kernel focuses amongst the other features to merge CAF-Updates in a regular manner, to provide updates, improvements and enhancements for SoC specific drivers and subsystems! This might take a while, because a lot of device specific testing is done on my end to ensure stability.
The EAS implementation from 4.19 CAF (sd865/+) was ported to this kernel. There are several interesting mechanisms qcom worked on. The basic layout of the soc architecture ( 4xLittle- , 3xBig- and 1x Prime-Core(s)) has not changed from SD855 to SD865. That means instead of revolution there was a very nice evolution the scheduler underwent.
The kernel includes a lot of improvements and contributions from other developers as well. Without this kernel would not exist.
Many of the improvements originate from @arter97´s, @kdrag0n´s, @RenderBroken´s and @Sultanxda´s work. Many others contributed in some way or another to this kernel.
A big thanks to all of them at this place!
Now lets continue with a list of features in the next paragraph!
Main Features:
- Based on latest kernel sources from OnePlus for Android 11
- Upstreamed against latest CAF
- Linux-Stable-Upstream included to latest 4.14.243
- compiled with Clang 13.0.1 prebuilt from Google
- built with -O3 speed optimizations
- Link-Time-Optimization (ThinLTO)
- Kernel Control-Flow-Integration (CFI)
- Shadow Call Stack (SCS) Security-Feature
- Use ThinLTO which was first used in the Pixel 4 XL Android R-Preview Kernel instead of full LTO for full program visibility (needed by CFI)
- fix CFI-Violations found in various subsystems like OnePlus/device specific drivers and qualcomm drivers
- Link the kernel with LLD and use RELR-Relocation
- include important fixes/improvements from kernel/common
- Flashing the kernel will keep root!
- Anykernel zip is based on the Anykernel3 repo from @osm0sis
- include vDSO 32 patches to improve 32-bit performance
- devfreq backports from 5.4 (sd 888 qcom kernel base)
- disable various debugging configs, that are not needed in a perf build kernel according to google.
- Removed RTB(interrupt) logging entirely
- disable selinux auditing (we don´t have to adress selinux denials running a stock rom)
- fix several coding issues detected by newer Clang-Toolchains
EAS related features:
- EAS scheduler backported from 4.19 CAF and 5.4 CAF / QCOM SOurce(SD865/SD888)
- adjust powerhal to account for scheduler backports
- disable autogroups and use cgroups for more efficient task placement!
- updates from kernel/common
- scheduler updates from Googles Pixel kernel
CPU related features:
- dynamic WALT-Windows based on FPS (more information here and here )
- Power saving workingqueues enabled by default (toggleable in EXKM)
have a read here: https://lwn.net/Articles/731052/
this complements EAS in general
- Change various drivers ( MM, audio) to user power efficient workingqueues. This should work well in conjunction with EAS
- include cpuidle patches from CAF
- improvements to cpufreq/times/stats
- improve memory allocations in binder driver
- vdso32 patches as found on Google Pixel devices (brief documentation here)
- arm64: lse: Prefetch operands to speed up atomic operations
- improve bluetooth performance
- improve /proc performance
- remove VLA-usage (info)
- option to disable touchboost in msm_performance
- disable coresight, enable coresight placeholder and add proper disabled clocks for sd 855
File System related features:
- improve memory allocations in sdcardfs
- improve memory allocations in kernfs
- writeback: hardcode dirty_expire_centisecs=3000 based on this commit
- ufs improvements from pixel 4/ pixel 5 kernel
- default IO scheduler to CFQ and readahead to 128
Usability related features:
- High Brightness Mode for increasing backlight level related to brightness accessible via EXKM app
- Vibration Intensity adjustable via EXKM app
- DC Dimming setting now fully functional
- add support for steam controller
- add support for nintendo switch controller
Display related features:
- KCAL to control the display
- KLAPSE integrated
- KCAL/KLAPSE: changes safety measures -> allow completely disabling two RGB values (this was requested to, for example, only have red values on night dimming)
- display tweaks to save power on statically rendered images (taken from samsung galaxy source, which uses a very similar panel)
- improve memory allocation
GPU related features:
- Ability to use the new 675mhz GPU step officially introduced by CAF (OP7/Pro is set to only use 585mhz as max)
more information and benches in the 1.2.0 release post
- add low_prio_worker thread for gpu driver (Improves performance when tearing down processes (eg, via LMK) and not blocking currently running UI from submitting work to the GPU
- remove debugging tracing from GPU driver
- improve memory allocation
Network related features:
- Wireguard Support (Details)
- advanced TCP algorithms enabled
- includes new bbr and bbrv2 (default to bbr as advised by @kdrag0n )
Memory related features:
- Memory Management patches from mainline kernel
- Speculative Page Faults (1. 2) (CAF-default)
- Fix various memory leaks in different subsystems
- allow ZRAM to use higher swappiness values than 100
- default ZRAM algorithm set to lz4 (fastest compression/decompression speeds)
- possibility to use lzo-rle as default ZRAM compression algorithm (more information here and there )
- possibility to use zstd as default ZRAM compression algorithm ( higher compression ratio, slightly lower compression decompression speed, more information and benchmarks here)
- free up memory by removing unused memory regions from dts
- improved performance for unity based games
- improved lz4 performance
Security related features:
- Control-Flow-Integration (CFI) and Link-Time-Optimization (LTO) ported from 4.19 kernel/common and Pixel 4/XL Kernel
- Use ThinLTO which was first used in the Pixel 4 XL Android R-Kernel instead of full LTO
- Shadow Call Stack (SCS) Security-Feature
- fix various CFI-Violations found in various subsystems like Asus/device specific drivers and qualcomm drivers
- enable init_on_alloc for even more security, more information can be found in the commit message
WLAN Driver:
- use CAF wlan driver and compile it inline, the only way to ensure working wlan with this kernel
- the kernel cannot even force load prebuild WLAN module as the kernel base is way to far from stock!
- do no longer rely on the pre compiled wlan driver module
- completely removed qcom_rx wakelock in the wlan driver
- removed debugging from wlan driver
- removed logging from wlan driver
Scheduler Setup and Kernel Settings:
- kernel setting get automatically applied at boot
- an AK3 helper module is automatically installed during flashing ( do not remove it in magisk manager)
Misc Features:
Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
- blocking a kernel wakelock should only be done in case of firmware incompatabilities (WiFi network at work (can´t be changed) causes deep sleep to not work on the phone.) That´s the only use case I see for this feature. The kernel does not features this to improve battery life!
Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
- magisk root
How to flash the Kernel:
1. Download the latest kernel.zip
1a. Optional: While it may not be necessary all times, you may want to restore stock boot.img, re-root with magisk and optionally install twrp.zip if coming from another kernel. Before reporting issues make sure you do that! Thank you!
1b. Optional: The stock kernel can be restored by either dirty flashing the firmware.zip or by restoring the stock dtbo.img as well as boot.img. Those can be extracted via payload extractor from the firmware.zip.
2. Make sure to use latest Magisk stable.
3. Flash the kernel.zip via latest EXKM or FKM app. Alternatively via TWRP if TWRP is working.
4. Reboot and profit. After flashing the kernel in magisk manager there will be a module called AK3 Helper Module, do not delete it.
DOWNLOAD:
Download is located always in this folder:
Android 11:
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes...www.androidfilehost.com
Android 10:
Android Pie:
Important: Read after Download
Please take a look at the second post after flashing the kernel!
Changelog:
Android 9/Pie
Android 10/Q:
Android 11/R
1.1.0_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-84786595
1.1.1_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-84793145
1.1.3_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-84812661
1.1.4_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-84853537
1.1.6_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-84900619
1.3.9_R https://forum.xda-developers.com/t/...r-op7-pro-aka-guacamole.3933916/post-85510637
Donations:
Donations are not mandatory but very welcome!
If you want to support development or just buy me a coffee/tea to get development going: http://paypal.me/freak07
Credits:
@osm0sis for all his work, including the ak2 installer!
@tbalden for being the best HTC wingman!
@LeeDroid for his awesome roms!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me in the past!
@arter97 for giving me advice
@kdrag0n for giving me advice
@topjohnwu for magisk!
@osm0sis for anykernel!
Contributors
Freak07
Source Code: https://github.com/freak07/Kirisakura_OP7Pro_A11
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-26
Last Updated 2020-09-2647Update to 1.6.0
Hey guys and girls,
Just like I started the release of 1.4.0. I know this update took quite a while again.
Good things take time and patience gets rewarded in this case
When I wanted to release 1.5.0 a few weeks ago, the issue with brainservice and missing sources started creeping up, earlier I was very busy.
The missing sources from OnePlus were a bit demotivating. There was no real reason to update the kernel, as it worked just fine as it was since the end of november.
Lets hope the new update works equally well.
Now we straight skip to 1.6.0. Merged latest CAF again like the last updates, merged latest linux-stable up to 4.14.162, patches from kernel common, brought in most recent f2fs-stable patches from a few weeks ago.
Latest updates from OnePlus, which dropped yesterday are also included. These should fix the prime core maxing out, because the brainservice is getting stuck.
So far all testers confirmed the phone behaving nicely. So I guess it´s good to go.
I removed the rmnet extensions, as they seem to cause issues with wireguard. Please test wireguard again and report back. Maybe that was indeed the culprit.
My magisk module is updated to work with magisk equal or higher to 20.2. (that means 20200 or higher!). The module won´t work on previous version of magisk most likely.
Functionality of the module stays the same.
Make sure to update to magisk 20.2 or the latest canary before flashing the module!
Detailed changelog below.
Enjoy!
Changelog:
Kernel Base
- Latest One Plus source updates merged (no more issues with brainservice causing the device to become hot and maxing out prime core)
- Upstream included from 4.14.156 to 4.14.162
- Upstream updates from kernel/common
- Latest CAF tag LA.UM.8.1.r1-13000-sm8150.0 for the SD855 merged
- remove rmnet extension from the kernel (this might fix wireguard as somebody hinted at in the thread earlier)
- update f2fs to latest state of f2fs-stable
Features:
- no new features
Other changes:
- update WiFi driver to LA.UM.8.1.r1-13000-sm8150.0
- update audio driver to LA.UM.8.1.r1-13000-sm8150.0
Magisk Module:
- V3 adjusts the magisk module to the layout required by magisk 20200 or higher (magisk 20.2)
Have fun flashing and enjoy your device with latest linux-stable
Why is linux-stable important?
I wish you all a nice day/evening!
Download is below
Download:
Kernel: https://www.androidfilehost.com/?fid=4349826312261694297
Magisk Module: https://www.androidfilehost.com/?fid=4349826312261694298
Instructions can be found in the OP!
But look at this post too
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak0742Hey guys and girls,
I know this took a while, but it´s a very busy time for me currently. I hope you all understand, but here´s finally a new build, that went through some good testing and should have no isses
The OnePlus 7Ts fingerprint scanner should work fine on OOS now.
All recent changes published by OnePlus are included as well.
Detailed changelog below.
Enjoy!
Changelog:
Kernel Base
- Latest One Plus source updates merged
- Upstream included from 4.14.152 to 4.14.155
- Upstream updates from kernel/common
- add support for OnePlus 7T devices.
Features:
- no new features
Other changes:
- look at github
Magisk Module:
- no new changes, still v2
Have fun flashing and enjoy your device with latest linux-stable
Why is linux-stable important?
I wish you all a nice day/evening!
Download is below
Download:
Kernel: https://www.androidfilehost.com/?fid=4349826312261647724
Magisk Module: https://www.androidfilehost.com/?fid=1899786940962614206
Instructions can be found in the OP!
But look at this post too
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak0741Update to 1.9.7
Hey guys and girls,
So here´s finally the next update. Linux-stable upstream, CAF upstream.
For the detailed changelog take a look below.
Downloads below.
Enjoy!
Changelog:
Kernel Base
- Upstream included from 4.14.174 to 4.14.182
- Upstream updates from kernel/common
- Latest CAF tag LA.UM.8.1.r1-14700-sm8150.0 for the SD855 merged
- built with clang 11.0.1 from Google prebuilts
- updates from kernel/common
- fix two memory leaks - thanks to @anupritaisno1 for the heads up
Features:
- Wireguard updated
Other changes:
- update WiFi driver to LA.UM.8.1.r1-14700-sm8150.0
- update audio driver to LA.UM.8.1.r1-14700-sm8150.0
Magisk Module:
- no update - use v4
Have fun flashing and enjoy your device with latest linux-stable
Why is linux-stable important?
I wish you all a nice day/evening!
Download is below
Download:
OOS:
Kernel: https://www.androidfilehost.com/?fid=4349826312261825431
Magisk Module: https://www.androidfilehost.com/?fid=4349826312261756065
Custom ROMs:
Kernel: https://www.androidfilehost.com/?fid=4349826312261825432
Magisk Module: https://www.androidfilehost.com/?fid=4349826312261756073
Instructions can be found in the OP!
But look at this post too
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak0740Kirisakura 1.0.0 for Android 10
Hey guys and girls,
So it was a long time, but I finally found time to release the kernel for Android 10 now.
Versioning will start at 1.0.0 again on the new Android version now
The kernel was actually ready for bascically 2 weeks, since the stable source was released.
I fell for it and actually started to work on a kernel with the beta sources from OnePlus for Android 10. Then stable was released and I saw no clean way to merge the stable OOS source into my tree, so I had to start from scratch.
While merging CAF in both, the beta and the stable source I noticed some very weird merge conflicts. @arter97 dropped me the crucial hint. (thanks to him!)
The source from OOS appears to be based on a quite recent CAF base, with CAF commits present in history up to September 2nd.
In fact the source is based on a CAF base that dates to the end of July! When merging CAF, now all the commits between this time frame were left out, because they appeared as commits in the history, but the actual code wasn´t.
You might call this fraud from OP I don´t know what´s the reason for this, but I don´t like it.
So for this release now, the OP source was reset back to the actual state it was on, all OnePlus driver changes were re-applied and most recent CAF was merged properly!
Most notable changes for Android 10:
- OOS specific stuff can´t be removed completely from the kernel without breaking the rom or making things worse in general. Rom side is dependant on these kernel modifications, even if I don´t like them
- it´s still recommded to flash the companion module, it improves jitter and smoothness
- nearly all previous features are still intact, check the OP I will update it in time
- the general ZRAM setup I left untouched this time. OOS on Android 10 is very RAM hungry. So I feel 6GB devices need the 2GB of ZRAM. (turn ram boost in settings on) I enabled LZ4 as compression algorithm compared to lzo from stock for better ZRAM performance.
- all optimizations plus more are still intact from previous Pie releases.
- system and vendor don´t get modified. To uninstall simply flash back stock kernel and disable/remove the magisk module
For detailed changes, have a look further down at the changelog!
Enjoy!
Changelog:
Kernel Base
- Based on latest sources from OnePlus for Android 10
- Latest CAF merged properly
- Upstream to 4.14.149
- latest changes from kernel/common merged
- build with CLANG 10
Features:
- all features from previous releases are still intact
- GPU Max freq at 585mhz now. I won´t do any hackery to get a higher freq for now. 675mhz isn´t stable for everyone and 585mhz is plenty for every game available.
Other changes:
- please check github
Magisk Module:
- Update for Android 10 (GCAM is not supported yet this time around)
Have fun flashing and enjoy your device with latest linux-stable
Why is linux-stable important?
I wish you all a nice day/evening!
Download is below
Download:
Kernel: https://www.androidfilehost.com/?fid=1899786940962607237
Magisk Module: https://www.androidfilehost.com/?fid=1899786940962607236
Instructions can be found in the OP!
But look at this post too
thanks for @arter97 and @kdrag0n for helping me out!
Have fun, enjoy the kernel and your phone.
If you like my work please consider a donation.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee/green tea: http://paypal.me/freak07
