• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[KERNEL] 23-09-2020 AGNi 🔥 MiUi/AOSP - Oreo/Pie/Q EAS v9.9.1

Status
Not open for further replies.
Search This thread

ashish1989

Senior Member
Aug 22, 2014
305
25
Ghaziabad
@psndna88 bro, I am using v9.7 kernel with firmware v6.0, I am also using mi standard charger qc 3.0. The problem which I am facing since many days is that after few minutes of charge, the charging current automatically stops, I then have manually plug out and then plug in the charging cable again. The charging then continues but stops automatically after few minutes, after that I have to again reinsert the cable to start charging.
When I use my basic stock charger there was no such problem in there.
Kindly provide any solution for this qc 3.0 charge problem
 

ashish1989

Senior Member
Aug 22, 2014
305
25
Ghaziabad
Update : I flashed extended kernel eas v51 today, the phone charged well and full without any problems with my mi standard charger qc3.0.
There was no interruption in the power supply.
The things I noticed are as follows:-
1. The phone heated less as compared to agni.
2. The phone charging speed is little less as compared to agni.
3. No disruption at all in the charging current as compared to agni, uaing qc 3.0 charger.
4. Can not say anything about battery backup, will reply shortly.
5. Phone is buttery smooth like as agni
I hope the developer will look into these recommendations and will work accordingly
 

Wiguna77

Member
Apr 26, 2018
11
0
Update : I flashed extended kernel eas v51 today, the phone charged well and full without any problems with my mi standard charger qc3.0.
There was no interruption in the power supply.
The things I noticed are as follows:-
1. The phone heated less as compared to agni.
2. The phone charging speed is little less as compared to agni.
3. No disruption at all in the charging current as compared to agni, uaing qc 3.0 charger.
4. Can not say anything about battery backup, will reply shortly.
5. Phone is buttery smooth like as agni
I hope the developer will look into these recommendations and will work accordingly
i have the same problem, i thought my charger is the problem yet the charger working fine with the other device, but i will stay on agni, thanks for the information friend.
waiting for your info about battery backup
 

psndna88

Recognized Contributor
Dec 2, 2011
7,495
17,795
Mumbai
AGNi whyred v9.9 EAS:-

* updated wifi drivers
* better battery life
* better charging

Detailed Changelog:-
Merge 4.4.236
Merge caf kernel LA.UM.8.2.r1-07300
qcacld-3.0 merge caf wifi Q LA.UM.8.2.r1-07300
qcacld-3.0 merge caf wifi pie LA.UM.7.2.r1-09300
base: add more to block boeffla wakelock blocker
drivers/net/usb: update Realtek RTL8152 FE, RTL8153 GbE USB LAN drivers v2.13.0 (2020/04/20)
AGNi installer: Wifi Q driver option as default
AGNi installer: add option for srgb enable/disable (whyred/tulip)
mdss: disable srgb cmdline switch (whyred/tulip)
config: enable cifs smb2 & smb3.x (samba file share protocol)
Fix direct references to HZ
msm-tsens: remove HZ dependency
usb: pd: qpnp-pdphy: Switch to hrtimer-based wait
usb: policy_engine: Remove workqueue high-priority flag
usb: policy_engine: set dual mode writeable for PD device
usb: dwc3-msm: Remove indefinite wakeup
usb: bam: disable event log by default
soc: glink: disable logging by default
irq: spurious: Disable IRQ debugging by default
BACKPORT: mm: add NR_ZSMALLOC to vmstat
mm: add ION heap-pool allocation stat into vmstat
kgsl: add GPU driver memory consumption in vmstat
msm_serial_hs: always rely on PM get/put logic
tty: serial: msm_serial_hs: fix ipclog spam, fix sysfs create, correct IPC_LOGGING ifdef
soc: qcom: stop spam when IPC_LOGGING is disabled
sched: Allow aggressive remote task interruptions
sched: Do not use IPIs for remote wakeups if idle
blk-mq: Do not wake idle CPUs to queue same-origin requests
kernel: power: qos: remove check for core isolation while cluster LPMs
diag: Add timer to make sure wakelock no stuck
dts: change "white" led implementation for fix fast blinking
dts: remove tulip dependency on msm-audio_e7t.dtsi
dts: dsi-panels: disable ulps & ack-disabled
Revert "serial: msm_serial_hs: Protect spurious irqs after wakeup irq enablement"
Revert "base: remove default blocking of qcom_rx_wakelock"
Revert "tcp: Disable SYN cookies"
Revert "tcp: Enable fast recycling by default"
Revert "tcp: Disable ping replies by default"
Revert "tcp: Increase max connections to accept"
Revert "tcp: Reuse existing connections"
Revert "tcp: Disable timestamps"
Revert "tcp: fastopen: Enable cookieless TFO clients and servers"

AGNi whyred v9.8 EAS:-
Merge 4.4.235
[BACKPORT] tcp_bbr: add BBR congestion control [public request]
net: ton of upstream changes
update wireguard
AGNi Installer: use hostname as per device
AGNi Installer: disable wifi RSSI preference for 5GHz over 2.4GHz AP
sync: Don't debug everything by default
net: ANDROID: fix a bug in quota2
scsi: ufs: Remove CPU latency voting to save power
scsi: ufs: Remove 10 ms CPU idle latency unvote timeout
sched/tune: Increase the cgroup limit to 6
cpuidle: lpm-levels: Allow exit latencies equal to target latencies
BACKPORT: lpm-levels: Add support to parse LPM parameters
drivers: cpuidle: lpm-levels: LPM prediction tuning
drivers: cpuidle: lpm-levels: Correct missing list initialize
BACKPORT: android,lowmemorykiller: Don't abuse TIF_MEMDIE.
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
Revert "msm: kgsl: Don't allocate memory dynamically for drawobj sync structs"
Revert "dts: dsi-panels: disable ulps & ack-disabled"
Revert "sched: use stune boost for top-app & only"
Revert "fscache: use appropriate radix tree accessors"
Revert "mm: get 7% more pages in a pagevec"
Revert "mm: store compound_dtor / compound_order as bytes"
Revert "mm: align struct page more aesthetically"
Revert "mm: remove reference to PG_buddy"
Revert "arm64: turn flush_dcache_mmap_lock into a no-op"
Revert "UPSTREAM: arm64: remove duplicate macro __KERNEL__ check"
Revert "UPSTREAM: mm/gup.c: fix access_ok() argument type"
Revert "hrtimer: Bump default timer slack to 500 us"


DOWNLOAD v9.9 Stable


AGNi Firmware (whyred) v6.1:-

* add vidc venus (video decoding) firmware files from Jasmine Q
* remove persist flash option (you guys have misused without reading & troubled me a lot)

Download Firmware v6.1 whyred
 
Last edited by a moderator:

psndna88

Recognized Contributor
Dec 2, 2011
7,495
17,795
Mumbai
AGNi whyred v9.9.1 EAS:-

* better battery life
* better charging

Detailed Changelog:-
camera: fixup wakelock not released in some cases
base: add more to block boeffla wakelock blocker Part 2
serial: msm_serial_hs: Protect spurious irqs after wakeup irq enablement"
Revert "soc: qcom: stop spam when IPC_LOGGING is disabled"
Revert "tty: serial: msm_serial_hs: fix ipclog spam"
Revert "tty: serial: msm_serial_hs: fix sysfs create"
Revert "tty: serial: Correct IPC_LOGGING ifdef"
Revert "msm_serial_hs: always rely on PM get/put logic"
Revert "dts: remove tulip dependency on msm-audio_e7t.dtsi"
Revert "dts: revert "white" led implementation's fast blinking"


DOWNLOAD v9.9.1 Stable
 
Last edited:

ashish1989

Senior Member
Aug 22, 2014
305
25
Ghaziabad
Superb work by the developer, v9.9.1 is working great and meeting expectations. Super battery life, super fast charging and super performance.
Excellent work bro, v9.9.1 is the best agni kernel until now.
 

psndna88

Recognized Contributor
Dec 2, 2011
7,495
17,795
Mumbai
NOTE: further updates here are paused untill xda does a revision of its rules based on current time and not live in old times and Forum Moderator @shadowstep serves warning to jobless developers using pling.com to earn some bucks for their works in Covid-19 era.

1: Pling is from freedesktop.org and does not show ads.
2: I provide links to the file list folder from which any user can download instantly without ADS.
3: While xda generates ads from here and there, they forbid content generators to earn money (there are nil voluntary donations since many years)
4: Xda needs to realise the reason why many premium quality roms/kernels are not much active on xda, rather use telegram for channels and content delivery and user support
5: Xda's own file upload system doesnt work - Firstly its still based ancient Adobe flash which most browsers block, Secondly even if i pass though this blockage, the file never gets uploaded. Why should i pay money extra for file hosting if can get for free in other places and even earn from it ?

XDA, pull up ur socks and think.

Attached screenshot of your file upload problems.
 
Last edited:

karandpr

Senior Moderator | DC Lead | MC
Staff member
Feb 20, 2011
10,581
16,631
Xiaomi Redmi 4a
Nokia 6.1 Plus (Nokia X6)
NOTE: further updates here are paused untill xda does a revision of its rules based on current time and not live in old times and Forum Moderator @shadowstep serves warning to jobless developers using pling.com to earn some bucks for their works in Covid-19 era.

1: Pling is from freedesktop.org and does not show ads.
2: I provide links to the file list folder from which any user can download instantly without ADS.
3: While xda generates ads from here and there, they forbid content generators to earn money (there are nil voluntary donations since many years)
4: Xda needs to realise the reason why many premium quality roms/kernels are not much active on xda, rather use telegram for channels and content delivery and user support
5: Xda's own file upload system doesnt work - Firstly its still based ancient Adobe flash which most browsers block, Secondly even if i pass though this blockage, the file never gets uploaded. Why should i pay money extra for file hosting if can get for free in other places and even earn from it ?

XDA, pull up ur socks and think.

Attached screenshot of your file upload problems.

I's surprising to see such post from an RC.
As far as hosting is concerned I am pretty sure you get AFH premium hosting as an RC perk.
As far as native file upload is concerned. You have missed the announcement , XDA is undergoing migration. Hosting is disabled for now.
https://forum.xda-developers.com/announcement.php?f=7426

Lastly, making a ROM is not a job.
13. Advertising and Income Generation

Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.

There are multiple ways to approach any issue. Any sort of revision of rules take time. Especially when it impacts lot of our procdures.
But making this "You do X thing or else I quit." is wrong.
So here is the thing you want to take the ball and go home.
Go home. Don't make this a drama.
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 72
    AGNi (Blazing Fast & Efficient Kernel)

    AGNi for whyred Telegram Development Group with latest builds (Redmi Note 5 Pro)
    AGNi for tulip Telegram Development Group with latest builds (Redmi Note 6 Pro)
    AGNi for Jasmine,wayne, lavender Telegram Development Group with latest builds (MI A2, MI 6x, Redmi Note 7)


    photo-2018-07-28-11-33-34.jpg


    NEW...

    AGNi Firmware v6.1
    AGNi Toolbox v1.4
    AGNi High Graphics Unlock for PUBG/CODmobile Magisk Module v1.0
    CHECK HERE


    AGNi whyred v9.9.1 EAS:-

    * better battery life
    * better charging

    Detailed Changelog:-
    camera: fixup wakelock not released in some cases
    base: add more to block boeffla wakelock blocker Part 2
    serial: msm_serial_hs: Protect spurious irqs after wakeup irq enablement"
    Revert "soc: qcom: stop spam when IPC_LOGGING is disabled"
    Revert "tty: serial: msm_serial_hs: fix ipclog spam"
    Revert "tty: serial: msm_serial_hs: fix sysfs create"
    Revert "tty: serial: Correct IPC_LOGGING ifdef"
    Revert "msm_serial_hs: always rely on PM get/put logic"
    Revert "dts: remove tulip dependency on msm-audio_e7t.dtsi"
    Revert "dts: revert "white" led implementation's fast blinking"


    AGNi whyred v9.9 EAS:-

    * updated wifi drivers
    * better battery life
    * better charging

    Detailed Changelog:-
    Merge 4.4.236
    Merge caf kernel LA.UM.8.2.r1-07300
    qcacld-3.0 merge caf wifi Q LA.UM.8.2.r1-07300
    qcacld-3.0 merge caf wifi pie LA.UM.7.2.r1-09300
    base: add more to block boeffla wakelock blocker
    drivers/net/usb: update Realtek RTL8152 FE, RTL8153 GbE USB LAN drivers v2.13.0 (2020/04/20)
    AGNi installer: Wifi Q driver option as default
    AGNi installer: add option for srgb enable/disable (whyred/tulip)
    mdss: disable srgb cmdline switch (whyred/tulip)
    config: enable cifs smb2 & smb3.x (samba file share protocol)
    Fix direct references to HZ
    msm-tsens: remove HZ dependency
    usb: pd: qpnp-pdphy: Switch to hrtimer-based wait
    usb: policy_engine: Remove workqueue high-priority flag
    usb: policy_engine: set dual mode writeable for PD device
    usb: dwc3-msm: Remove indefinite wakeup
    usb: bam: disable event log by default
    soc: glink: disable logging by default
    irq: spurious: Disable IRQ debugging by default
    BACKPORT: mm: add NR_ZSMALLOC to vmstat
    mm: add ION heap-pool allocation stat into vmstat
    kgsl: add GPU driver memory consumption in vmstat
    msm_serial_hs: always rely on PM get/put logic
    tty: serial: msm_serial_hs: fix ipclog spam, fix sysfs create, correct IPC_LOGGING ifdef
    soc: qcom: stop spam when IPC_LOGGING is disabled
    sched: Allow aggressive remote task interruptions
    sched: Do not use IPIs for remote wakeups if idle
    blk-mq: Do not wake idle CPUs to queue same-origin requests
    kernel: power: qos: remove check for core isolation while cluster LPMs
    diag: Add timer to make sure wakelock no stuck
    dts: change "white" led implementation for fix fast blinking
    dts: remove tulip dependency on msm-audio_e7t.dtsi
    dts: dsi-panels: disable ulps & ack-disabled
    Revert "serial: msm_serial_hs: Protect spurious irqs after wakeup irq enablement"
    Revert "base: remove default blocking of qcom_rx_wakelock"
    Revert "tcp: Disable SYN cookies"
    Revert "tcp: Enable fast recycling by default"
    Revert "tcp: Disable ping replies by default"
    Revert "tcp: Increase max connections to accept"
    Revert "tcp: Reuse existing connections"
    Revert "tcp: Disable timestamps"
    Revert "tcp: fastopen: Enable cookieless TFO clients and servers"


    Old Versions:

    AGNi whyred v9.8 EAS:-

    Detailed Changelog:-
    Merge 4.4.235
    [BACKPORT] tcp_bbr: add BBR congestion control [public request]
    net: ton of upstream changes
    update wireguard
    AGNi Installer: use hostname as per device
    AGNi Installer: disable wifi RSSI preference for 5GHz over 2.4GHz AP
    sync: Don't debug everything by default
    net: ANDROID: fix a bug in quota2
    scsi: ufs: Remove CPU latency voting to save power
    scsi: ufs: Remove 10 ms CPU idle latency unvote timeout
    sched/tune: Increase the cgroup limit to 6
    cpuidle: lpm-levels: Allow exit latencies equal to target latencies
    BACKPORT: lpm-levels: Add support to parse LPM parameters
    drivers: cpuidle: lpm-levels: LPM prediction tuning
    drivers: cpuidle: lpm-levels: Correct missing list initialize
    BACKPORT: android,lowmemorykiller: Don't abuse TIF_MEMDIE.
    sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
    Revert "msm: kgsl: Don't allocate memory dynamically for drawobj sync structs"
    Revert "dts: dsi-panels: disable ulps & ack-disabled"
    Revert "sched: use stune boost for top-app & only"
    Revert "fscache: use appropriate radix tree accessors"
    Revert "mm: get 7% more pages in a pagevec"
    Revert "mm: store compound_dtor / compound_order as bytes"
    Revert "mm: align struct page more aesthetically"
    Revert "mm: remove reference to PG_buddy"
    Revert "arm64: turn flush_dcache_mmap_lock into a no-op"
    Revert "UPSTREAM: arm64: remove duplicate macro __KERNEL__ check"
    Revert "UPSTREAM: mm/gup.c: fix access_ok() argument type"
    Revert "hrtimer: Bump default timer slack to 500 us"


    AGNi whyred v9.7 EAS:-

    * better internet speed
    * better performance
    * faster, consistent & cooler charging

    Detailed Changelog:-
    Merge 4.4.233, 4.4.234
    Merge CAF LA.UM.8.2.r1-07200 (Q tag)
    qcacld-3.0: Merge CAF LA.UM.8.2.r1-07200 (Q tag wifi)
    mdss: disable Miui's Content Adaptive Backlight Control (CABC)
    - should stop dimming of display on scrolling in MIUI
    fs: exfat v2.2.0 (arter97)
    qdsp6v2: handle a missing mutex unlock case
    dts: dsi-panels: disable ulps & ack-disabled
    binder: Prevent context manager from incrementing ref 0 (from 4.4.223) [FIX]
    Revert: "msm: kgsl: Mark the scratch buffer as privileged" from LA.UM.8.2.r1-07200
    Revert partial: "msm-tsens: Reschedule work instead of causing uninterruptible sleep"
    Revert "treewide: Nuke ESD_TE_status"
    Revert "md: disable dm-verity"
    Revert "hrtimer: Bump default timer slack to 500 us"
    Revert "sched: time: Disable timer migration"
    Revert "sched: Disable NONTASK_CAPACITY"
    Revert "msm: mdss: Don't add event timer for unused autorefresh feature"
    Revert "msm: mdss: Remove duplicate pm_qos object used for unblanking"


    AGNi whyred v9.6 EAS:-

    Detailed Changelog:-
    dts: added many new cpu frequency steps & fix corresponding regulator stuff
    msm_performance: fix "set max cpufreq" with MIUI source
    sched: Process new forks before processing their parent
    sched: time: Disable timer migration
    sched: Disable NONTASK_CAPACITY
    sched/fair: Port Migration Hysteresis Filter from HiSilicon EAS
    sched: use stune boost for top-app & only
    schedutil: Import fb callbacks to disable iowait boost on screen off
    cpufreq: respect cmdline for allowed max cpu oc freq on boot
    kernel: Only set one CPU in the default IRQ affinity mask
    qdsp6v2: restore to latest CAF Q tag for all devices
    >> [as we fixed the old boot fail issue in tulip]
    dts: msm-audio_e7t: add missing qcom,msm-audio-apr node
    >> [finally FIX tulip boot on Q-tag CAF - mystic]
    hrtimer: Bump default timer slack to 500 us
    UPSTREAM: mm/gup.c: fix access_ok() argument type
    UPSTREAM: arm64: remove duplicate macro __KERNEL__ check
    arm64: turn flush_dcache_mmap_lock into a no-op
    mm: remove reference to PG_buddy
    mm: align struct page more aesthetically
    mm: store compound_dtor / compound_order as bytes
    mm: get 7% more pages in a pagevec
    fscache: use appropriate radix tree accessors
    mdss: tweak from stock MIUI source
    kgsl: Don't allocate memory dynamically for drawobj sync structs
    kgsl: Report correct GPU frequency for clock_mhz
    thermal-core: Fix invalid sensor data being accepted
    msm-tsens: Reschedule work instead of causing uninterruptible sleep
    mdss: Don't add event timer for unused autorefresh feature
    mdss: Remove duplicate pm_qos object used for unblanking
    tcp: Disable SYN cookies
    tcp: Enable fast recycling by default
    tcp: Disable ping replies by default
    tcp: Increase max connections to accept
    tcp: Disable slow start after idle by default
    tcp: Reuse existing connections
    input: fix AOSPA dt2w derp
    config: use "veno" as default tcp congestion control


    AGNi whyred v9.5.2 EAS:- Quickfix
    mdss: fix sgrb problems for non-aosp roms REWORKED
    sched: GPU load based automatic ioboost for EAS cpu governors

    AGNi whyred v9.5.1 EAS:- Quickfix
    mdss: fix sgrb problems for non-miui roms (no need of magisk module/scripts)
    cpufreq: add toggle to block min & max cpufreq changes by userspace

    AGNi whyred v9.5 EAS:-

    * Enhanced Gaming performance
    * Fixed compatibility issues with Google Camera
    * Fixed compatibility for MIUI 12 Q ported roms (whyred/tulip)
    * Fix rare display flicker issues
    * Add High Graphics unlock mode for PUBG & COD mobile
    (may not work for some roms, use "AGNi Game Unlock module" for that)
    * Resolve wifi problems and make OLD Pie-based wifi driver as default
    * Downloads stop after screen off should be resolved now

    Detailed Changelog:-
    Merge Linux 4.4.232
    camera: mystic gcam freeze fix
    camera: disable logging
    touchscreen: synaptics_dsx_e7s: use high priority & unbound workqueues(whyred)
    mdss: modifications for Miui 12 Q ports (whyred/tulip)
    mdss_fb: allow reading of ce, cabc, srgb, gamma & hbm modes
    dts: mdss-panels: add ce on/off & some missing srgb on/off cmds
    mdss_fb: lcd backlight default min limit to 20
    sched: use stune boost for top-app & foreground
    adreno: enable fake adreno 512 gpu after 1st boot v2 (whyred/tulip)
    md: skip dm-verity check (may fix boot issues on stock miui rom whyred/tulip)
    AGNi installer: new option for PUBG & COD mobile High graphics unlock
    AGNi installer: add CPU OC disclaimer page and set NON-OC as default option
    AGNi installer: add OLD Pie tag wifi option as Default
    modify configuration for Wifi drivers with GRO, TSO, DFS
    soc: qcom: service-locator: Fix memory leak in pd_locator_work
    writeback: Avoid skipping inode writeback
    nvt_touch: disable firmware update on boot
    base: remove default blocking of qcom_rx_wakelock
    gpio: nuke invalid gpio error warning
    dts: minor cpu freq fixups
    Revert "pm660l dtsi: use analog dimming"
    Revert "ARM: dts: Reduce the maximum voltage allowed for the panel"
    Revert partial "dts: add stuff from jasmine Q source" Part 2
    Revert "sched: enable Dynamic Schedtune Boost by default"
    Revert "workqueue: queue everything on system's power efficient wq"


    AGNi whyred v9.4 hybridEAS:-

    * Fully compatible with HMP(non-EAS) roms without need of EAS/Pixel perf-hal module
    * Faster faceunlock (whyred/tulip)
    * Wifi drivers (Pie & Q) increased speeds & efficiency
    * Better battery temperature reading and charging management

    Detailed Changelog:-
    cpufreq: create permanent "interactive" tunables for any real cpu governor used
    - Creates HMP-like environment for roms not built for EAS.
    - They can write into HMP-default interactive governor tunables and not give perf errors in logs.
    sched: add non-EAS, HMP specific scheduler dummy tunables
    - Makes EAS kernel backwards compatible with HMP roms.
    - This kills the need for seperate EAS perf hal files to stop errors in log.
    qcacld-3.0: disable ton of debugging & tracing (Pie & Q) Part 2
    AGNi installer: remove EAS perf hal option
    wireguard: version 1.0.20200729
    block: tweak cfq & anxiety iosched
    adreno: new interface to fake gpu model after boot (whyred/tulip)
    adreno: enable fake gpu after 1st boot (whyred/tulip)
    binder: Import from android-4.19-Q
    binder: Switch binder_deferred_lock to a spinlock
    binder: Reserve caches for small, high-frequency memory allocations
    binder: use dedicated high priority unbound workqueue
    config: tcp congestion algorithm "westwood" as default
    Revert partial "dts: add stuff from jasmine Q source"
    Revert "nvt_touch_e7s/a: make changes as per Jasmine nvt_touch_d2s"


    AGNi whyred v9.3 EAS:-

    * touchscreen improvements
    * improved wifi speeds with reduced logging
    * add optional new CPU OC step

    Detailed Changelog:-
    Merge 4.4.231
    Merge CAF LA.UM.8.2.r1-07000
    qcacld-3.0: Merge CAF LA.UM.8.2.r1-07000 (Q tag wifi)
    qcacld-3.0: disable ton of debugging & tracing (Pie & Q tag wifi)
    qcacld-3.0: restructure wifi Q & Pie drivers
    AGNi installer: add optional 2.45GHz cpu oc
    AGNi installer: install Wifi firmware files with Wifi driver selection
    dts: leds: restore red led node to stock state
    dts: memlat use cpufreq & add 2.45GHz step
    config: tcp congestion algorithm "veno" as default
    config: enable blu_schedutil & pwrutilx cpu governors
    add stuff from jasmine Q source
    mm: change swappiness in dynamic memory management
    touchscreen: disable logs & debugging
    touchscreen: remove WQ_FREEZABLE & add IRQF_NO_SUSPEND flags
    touchscreen: FINALLY FIXED DT2W (jasmine)
    touchscreen: add AOSPA's dt2w support (whyred/tulip/wayne/jasmine/lavender)
    nvt_touch: support all dt2w implementations
    nvt_touch_e7s/a: make changes as per Jasmine nvt_touch_d2s
    kernel: Use stock config for /proc/config.gz (jasmine)
    block: disable iostats & set permission read-only
    cpufreq/msm_performance: block max freq limits with the cpu_oc node
    sched/idle: Micro-optimize the idle loop (FIXUP)


    AGNi whyred v9.2 EAS:-

    * aimed to reduce battery consumption for general use

    AGNi installer: do not abort install if no ramdisk found.
    Revert "zram: use default zstd compression"
    Revert partially "sched/fair: Make scheduling period more efficient"
    Revert "sched/core: nr_migrate = 128 increases number of tasks to iterate in a single balance run."

    AGNi whyred v9.1 EAS:-

    * Improved performance & ram handling
    * better optimisation for 3GB ram devices

    Detailed Changelog:-
    kernel: disable WARN on unbalanced wake IRQ
    kernel: module: do not taint the wlan module
    wireguard: version 1.0.20200712
    nvt_d2s: remove old dt2w interface
    mm: increase swappiness for dynamic memory management
    mm: readahead 128kb for 3gb ram devices & 512kb for others
    qpnp-fg-gen3: Limit how frequently fg data can be queried
    init: miui detection based on cmdline androidboot.miui=1 FIXUP
    Revert "sched: Increase the time a task is considered cache-hot"
    Revert "perf: Restrict perf event sampling CPU time to 5%"
    Revert "random: squash update"
    Revert "mm: slab: free kmem_cache_node after destroy sysfs file"
    Revert "mm/slub.c: replace kick_all_cpus_sync() with synchronize_sched() in kmem_cache_shrink()"


    AGNi whyred v9.0 EAS:-

    * improved charging
    * improved reduced battery consumption
    * cpu non-overclock option

    Detailed Changelog:-
    Merge 4.4.229 & 4.4.230
    AGNi installer: add force MIUI-Q camera mode option (wayne/jasmine/lavender)
    AGNi installer: selecting cpu non-oc will not allow user modification of max frequencies.
    AGNi installer: add option to modify PERF HAL for EAS & schedutil support
    AGNi installer: add CPU OC option (whyred & tulip)
    power: dts: restructure with power limits 18W
    * whyred & tulip: QC 3.0 @ 7.6volts x max 2300mA = 17.48 Watts max power
    * wayne, jasmine, lavender: QC 3.0 @ 6.6volts x max 2700mA = 17.82 Watts max power
    * temperature specific charging precise from 41C to 45C
    init: improve miui detection based on cmdline
    cpufreq: block setting max freq limits with the cpu_oc node (whyred/tulip)
    msm_performance: add non-oc max freq limits with new cpu_oc node (whyred/tulip)
    touchscreen: remove old dt2w interface & optimise
    mdss_fb: fix powered off charging
    treewide: Nuke ESD_TE_status
    rradc: stop kernel log spam
    mm/slub.c: replace kick_all_cpus_sync() with synchronize_sched() in kmem_cache_shrink()
    mm: slab: free kmem_cache_node after destroy sysfs file
    random: squash update
    perf: Restrict perf event sampling CPU time to 5%
    tcp: Disable timestamps
    tcp: fastopen: Enable cookieless TFO clients and servers
    sched: Increase the time a task is considered cache-hot
    Revert "Kernel:power: add nvs hibernate driver"


    AGNi whyred v8.9 EAS:-

    * safer 18 Watts fast less-heat charging

    Merge CAF LA.UM.8.2.r1-06900 (Q tag)
    qcacld-3.0: wifi Merge CAF LA.UM.8.2.r1-06900 (Q tag)
    power delivery: limit to 2000mA for 9v charging
    power delivery: add api to querry charging current is 9v or 5v
    qpnp-fg-gen3: define charging current limits based on 18W max power
    wireguard: version 1.0.20200623
    cpufreq: remove forced building of performance cpu governor and all others except schedutil.

    AGNi whyred v8.8.1 EAS:-
    * improved gaming experience
    * improved apps multitasking
    * clearer speaker sound
    * safer fast less-heat charging
    * user can force selection of old-camera or new-camera libs support

    v8.8.1 change: power delivery: limit to 2000mA for 9v charging
    Detailed Changelog:-
    Merge kernel 4.4.228
    AGNi memory monitor: dynamic swappiness for zram v2.1
    AGNi: add options to force select Old cam & new cam support
    touchscreen: nvt_d2s: resolve jasmine dt2w
    Built using GCC 10.0.1
    sound: sdm660: increase speaker clarity by reducing digital gains
    ASoC: sdm660-internal: switch to tas2557 ASI2 DAI for Primary MI2S Playback
    irqchip: fix GCC 10 section mismatch warning
    sched: Makefile: remove duplicity
    Revert "power: drop caches on charger connect/disconnect"


    AGNi whyred v8.7 EAS:-
    * Smart & automated ALL-IN-ONE graphical installer
    * More safe charging - fast as well as temperature controlled
    * touch improvements
    * smooth user exprience

    Detailed Changelog:-
    AGNi: All-IN-One unified automated AROMA+anykernel3 installer (detect camera libs & install required kernel image)
    AGNi: Auto detect Android & MIUI version on install and setup configuration accordingly
    AGNi: Wifi driver as selectable autoloaded module (Default: Pie-based/Optional Q-based)
    AGNi: Auto install WiFi HAL lib for MIUI Q & fixed dpmframework lib on MIUI-11 Pie roms
    AGNi: update anykernel3 installer base
    AGNi memory monitor: dynamic swappiness for zram v2.0 (Handle 3GB ram devices more aggressively)
    power: drop caches on charger connect/disconnect
    power: max charging current limits based on battery % v3 (max 2400mA: adequate safety margin from hardware limit 18W).
    touchscreen: use freezable, high priority & unbound workqueues
    touchscreen: mark irq handlers as PERF_CRITICAL
    touchscreen: nvt: Disable debugging
    qpnp-fg-gen3: define min & max charging current limits based on battery %
    Merge kernel 4.4.227
    arm64: arch_timer: simplify accessors
    wireguard: version 1.0.20200611
    qpnp-haptic: Dejank the haptics
    init: Export Android version from kernel command line
    loop: Hard-code initial device count based on Android version
    thermal_core: kill userspace thermal-engine interference
    qcacld-3.0: partially remove changes from LA.UM.7.2.r1-08800 (fix 5GHz slow speed for some)
    Revert "qcacld-3.0: enable 2.4GHz channel bonding by default"
    Revert "qcacld-3.0: Add bound check for fixed_param->total_num_tx_power_levels"
    Revert "tas2557-codec: enable sampling rates up to 384kHz"
    Revert "ASoC: sdm660-internal: switch to tas2557 ASI2 DAI for Primary MI2S Playback"


    AGNi whyred v8.6 EAS:-
    * better smoothness & cpu tasks handling
    * reduced gaming heat with good performance
    * better sound clarity & volume for wired earphones (without need for tweaks/modules)
    * fix boot problems & notification led issues on many Lineage OS tree based roms
    * fix many memory leaks
    * better charging experience
    * reduce some logging activities
    * overall general improvements

    Deltailed Changelog:
    Merge android-linux-stable-4.4/kernel.lnx.4.4.r37-rel [4.4.226]
    Merge CAF LA.UM.8.2.r1-06700 (Q tag)
    compiled using gcc 9.3.0-ubuntu
    leds-qpnp: add synchronized rgb control
    leds-qpnp: make synchronized rgb control compatible with our RGBW implementation
    qpnp-pwm: add api for synchronous enable of pwms
    dts: Add cmd for livedisplay CABC
    ion_system_heap: update supported page-orders for ion pool
    iommu: dma-mapping-fast: fix iova alloc wrap
    iommu: do not attempt reclaim on higher order allocs
    iommu: dma-mapping-fast: fix iova alloc wrap
    regulator: dts: sdm660 CPU -40 uV
    binder: Rate-limit debug and userspace triggered err msgs
    msm-poweroff: allow edl mode command
    config: use SYNAPTICS_DSX_v21 touchscreen driver for jasmine
    power: supply: set max charging temperature limits v4
    ANDROID: pstore: Use vmalloc for large allocations due to ramoops size
    ANDROID: fs/pstore/ramoops: Use vmalloc() for old buffer
    config: increase ring-buffer for console log 128KB -> 1MB
    ASoC: msm-cpe: Fix msm_cpe_lsm_ioctl_compat error handling
    ASoC: wcd_cpe: fix buffer size
    sched: enable Dynamic Schedtune Boost by default
    sched/fair: Tune the scheduler using Google's presets
    block: add bfq v8 iosched & enable noop iosched
    qpnp-fg-gen3: force adherance to charging current limitations
    power_supply: Add property for capping parallel FCC
    power_supply: add POWER_SUPPLY_PROP_(BATFET_MODE/MIN_CIL) properties
    cpuidle:lpm: Fix div by zero bug
    fs: compat: Disable logging by default
    selinux: stop flooding the log buffer
    Revert "drivers: input: touchscreen: ft8719: change MultiTouch Protocol (tulip)"
    Revert "msm: camera2_v2: Return proper v4l2 buffer status for empty frames"
    Revert "msm_ispif: Increase timeout to 10 seconds from 1 second."
    Revert "msm: cpp: Reduce cpp timeout on MC error"
    Revert "msm: camera: Do not wait for complete during driver_probe"
    Revert "printk: help pr_debug and pr_devel to optimize out arguments" from 4.4.226
    Revert "schedutil: squash update"


    AGNi whyred v8.5 EAS:-
    Merge 'android-linux-stable-4.4/kernel.lnx.4.4.r37-rel' [4.4.224, 4.4.225]
    Merge CAF LA.UM.8.2.r1-06600 (Q tag)
    qcacld: merge wifi CAF LA.UM.7.2.r1-08800 (Pie tag)
    qcacld: merge wifi CAF LA.UM.8.2.r1-06600 (Q tag)
    disable dynamic fsync, dynamic fps and dynamic bitclk
    camera: support MIUI 12 Android 10 mode
    dts: drivers/leds: new white led implemention along with red led
    touchscreen: Add an interface to expose dt2w TP features to userspace
    power: supply: set max charging temperature limits v3
    qpnp-fg-gen3: 1000mA minimum charging <= 90%
    mm: implement Android-tuned pageblock heuristic from Xiaomi
    tcp congestion algorithm westwood back to default
    zram: use default zstd level 1 compression
    fbdev: msm: wait for frame complete before triggering dma cmd
    fbdev: msm: Fix race condition during te_irq calls
    set default tcp congestion control algorithm to hybla
    schedutil: squash update
    wireguard: version 1.0.20200520
    sched/core: nr_migrate = 128 increases number of tasks to iterate in a single balance run.
    sched/fair: Make scheduling period more efficient
    vfs/ext4,f2fs: finish umount(2) in time with filesystem work [fix f2fs]
    f2fs: squash update with rapid gc
    mdss: dsi panel minimum refresh rate 30 Hz
    mm: Increase ratelimit pages value
    dts: sdm660-regulator: Add cooling devices for VDD_MX and VDD_CX
    dts: sdm660_e7s/e7t/wayne: Add cpu set for adsp glink

    AGNi whyred v8.4 EAS:-
    * Sustained temperature controlled fast current charging
    * Upstreamed to 4.4.223
    * Based on Latest CAF Android Q sources
    * touchscreen improvements
    * cpu and gaming performance improvements
    * memory management improvements
    * improved user interface snappiness

    Detailed Changelog v8.4:

    qcacld: use CAF LA.UM.8.2.r1-06500 (Q tag) wifi version for Q builds
    qdsp6v2: restore to LA.UM.7.2.r1-08700 CAF Pie Tag [tulip boot issues]
    Rebase from scratch over LA.UM.8.2.r1-06500 (CAF Q tag)
    Merge 'android-linux-stable-4.4/kernel.lnx.4.4.r37-rel' [4.4.222]
    Merge 'android-linux-stable-4.4/kernel.lnx.4.4.r37-rel' [4.4.223]
    f2fs: restore to aosp upstream-f2fs-stable-linux-4.4.y
    iommu: msm: Rewrite to improve clarity and performance
    touchscreen: use freezable, high priority & unbound workqueues
    camera_v2: isp: revert some new CAF Q stuff
    dts: add dynamic bitclk support
    dts: Reduce the maximum voltage allowed for the panel
    dts: use analog brightness dimming
    dts: sdm660 increase linux,cma from 32M to 128M
    dts: sdm660: Add calculated EAS energy model (kdragon)
    dts: qpnp-smb2: modify thermal mitigation limits, max 2500mA/2000mA
    dts: raise fg-sys-term-current to 800mA
    qpnp-fg-gen3: 1000mA minimum charging 70% to 90%
    power: set max charging currents to 2500mA/2000mA, temperature limits
    qpnp-smb2: fake as display off to fasten charging rates
    power: changes as per Jasmine Q sources
    kgsl: Increase worker thread priority
    camera2_v2: Return proper v4l2 buffer status for empty frames
    Power efficient workqueues for vmstat,ipa,qpnp-fg-gen3,mdss,thermal,block,bcl
    nvt_touch_f7a: debloat the driver
    enable HYBLA tcp congestion algorithm & set CDG default
    v4l2-ioctl: Use a larger on-stack video copy buffer
    mdss: Mark display-wake kthread as performance critical
    mdss: Power on display asynchronously as early as possible
    qcom-cpufreq: Limit the rate of CPU clock-rate changes
    schedutil: enforce realtime priority
    sound control: add microphone gain
    dmaengine: Fix memory leak in dma_async_device_register
    mm: add ION heap-pool allocation stat into vmstat
    mm: revert some commits
    Revert "ANDROID: mmc: move to a SCHED_FIFO thread"


    AGNi whyred v8.1 EAS:-
    merge kernel.org 4.4.218, 4.4.219
    Partial Merge adreno/kgsl CAF/LA.UM.8.2.r1-06300 (Q tag)
    msm-poweroff: Do sys_sync() on restart & poweroff
    AGNi: auto detection of MIUI rom and apply configuration
    iommu: msm: Rewrite to improve clarity and performance
    ion: Rewrite to improve clarity and performance
    gpu driver updates & add adreno idler
    gpu uv modifications
    mm: Increase vmstat interval
    upgrade low memmorykiller
    qpnp-fg-gen3: disable uselss sram dump
    qpnp-fg-gen3: make D2S battery calculation like E7S/E7T
    power: qpnp-fg-gen3: Return true battery capacity
    power: qpnp-fg-gen3: Hardcode nom_cap_uah and learned_cc_uah
    qpnp-fg-gen3: allow write any learned capacity
    fs: implement exfat v1.2.24-20190524
    disable tracing/logging at various places Part 7
    block: add ROW io scheduler
    kernel/workqueue: fix permission
    sched/cpufreq: new cpu governors
    exec: Extend task_is_booster check to cover OxygenOS userspace HALs
    dts: qcom: modifications for display panel properties whyred/wayne/tulip
    Fix kernel taint, disable LRO
    loop: avoid EAGAIN, if offset or block_size are changed
    Workaround for sensor ipc message causing high power consume
    msm: mdss: Fix potential buffer overflow

    AGNi whyred v8.0 EAS:-
    thermal: implement simple MSM thermal solution
    dts: msm_simple_thermal: modify AGNi's thermal zone values
    dts: tweak gpu properties
    improvements to speaker audio output
    staging: Whetstone MIUI memory-swap state driver
    qpnp-fg-gen3: disable capacity learning and battery capacity fixes
    qpnp-fg-gen3: add cycle_counts_bins device driver attribute
    qpnp-fg-gen3: fix soc not keeping full after charging overnight
    qpnp-fg: Don't hold wakelocks
    qpnp-fg: Calculate battery more linearly
    camera_v2: merge CAF/LA.UM.8.2.r1-06300 for AGNi Q builds
    Partial merge CAF/LA.UM.8.2.r1-06300 (Q tag)
    Build Q from LA.UM.7.2.r1-08500
    kernel: Use the stock config for /proc/config.gz
    Revert "msm: mdss: fb: fix panel reconfiguration check for format change"
    ASoC: TAS2557 various commits
    mm: Do readahead if requested size is over 128 KiB
    arm64: crypto: add NEON accelerated XOR implementation
    ION: Improve cache accounting
    usb: gadget: f_fs: Fix possibe deadlock
    disable audit & profiling
    slimbus: Add missing brackets in slim_change_existing_chans
    drivers: char: diagfwd_peripheral: fix misleading-indentation
    drivers: msm: ipa: check before freeing allocated memory
    AND MANY MORE.

    AGNi whyred v7.1 EAS:-
    AGNi dynamic swappiness for zram v1.2
    * zram swapping is allowed only when-
    * 1: available ram is less then 25% of total ram (auto detected)
    * 2: gpu load is less than 75% (no swapping while gaming, use those cpu cycles for game instead)
    * 3: battery is more than 25%
    * Hardwired swappiness values = 1 or 30
    * Trigger mechanism integrated in qpnp-fg-gen3 and calculations done on changes in battery %
    Merge Kernel.org 4.4.212
    block: Add ZEN v2 IO scheduler
    arm64: Allow the arch timer to use the HYP timer
    Incrase current to 165mA to update fidelity a little bit more
    ASoC: wcd9xxx: Increase HPH bias current to improve fidelity
    zram: revert changess
    dts: disable dynamic fps
    Merge Kernel.org 4.4.211
    Merge Kernel.org 4.4.210
    Merge Kernel.org 4.4.209
    qcacld-3.0: merge CAF/LA.UM.7.2.r1-08100
    Merge CAF/LA.UM.7.2.r1-08100
    block: introduce Depression I/O scheduler
    sound: soc: Add DTS Headphone:X driver
    fs: exfat: make delayed-meta disabled and discard enabled by default
    disable tracing/logging at various places rcu
    mm/slab_common: Align all caches' objects to hardware cachelines
    fs: exec: block nfs injector from launching
    fs: introduce unwated apps blocker
    AGNi whyred v6.9:-
    (MIUI OreoPie/AOSP Pie):
    Merge caf/LA.UM.7.2.r1-07900
    qcacld-3.0: Merge LA.UM.7.2.r1-07700 & LA.UM.7.2.r1-07900
    Partial Merge CAF/LA.UM.8.2.r1-05100 from Android 10 tag
    Merge Kernel.org 4.4.207 & 4.4.208
    Revert "ALSA: pcm: Avoid possible info leaks from PCM stream buffers" Fixes Whatsapp & Telegram Calling crashes
    wireguard: update version
    Many others
    (Android 10):
    Merge CAF/LA.UM.8.2.r1-05100
    qcacld-3.0: Merge LA.UM.7.2.r1-07700 & LA.UM.7.2.r1-07900
    Merge Kernel.org 4.4.207 & 4.4.208
    Revert "ALSA: pcm: Avoid possible info leaks from PCM stream buffers" Fixes Whatsapp & Telegram Calling crashes
    wireguard: update version
    lib: update lz4
    msm: qpnp-haptic: set up sysfs interface for common cmhw implementation
    msm: qpnp-haptic: Process haptics asynchronously
    mdss: fix Klapse srgb control
    Many others

    AGNi whyred v6.6:- (MIUI Oreo/Pie & AOSP pie)
    Merge kernel.org 4.4.198,4.4.199,4.4.200,4.4.201,4.4.202
    Merge CAF LA.UM.7.2.r1-07600
    qcacld-3.0: Merge LA.UM.7.2.r1-07600
    CVE-2019-5489 Change mincore() to count "mapped" pages rather than "cached" pages
    msm: mdss: Boost CPU when committing a new frame when GPU is used
    kgsl: add an api to query adreno kgsl resume/suspend states
    msm: mdss: Boost CPU when committing a new frame

    AGNi whyred v6.5:- (MIUI Oreo/Pie & AOSP pie)
    dts: qcom: whyred/tulip/wayne: fix boot on oreo fw
    Klapse v5.0
    Merge Linux 4.4.197
    msm: mdss: Fix potential buffer overflow
    exfat: version 2.2.0-3arter97
    kgsl,mdss: rework scheduler priorities
    zsmalloc use faster PGTABLE_MAPPING for zram use
    Revert "rcu: Squash commits through android kernel 4.9.96"
    block: fixup derps
    Revert "msm: mdss: Boost CPU when committing a new frame"
    mm: fix pageblock heuristic
    mm: revert various stuff including speculative page fault, simple lmk, uksm
    config: fixup vfat/exfat selinx xattr label
    fs: sdfat: rename functions to avoid conflict with exfat-linux driver
    fs: exfat: allow discard parameter by default
    fs: add exfat-linux filesystem support from arter97
    mdss: various reverts
    Revert "vidc: restore to stock Xiaomi State"
    Revert " sched/tune: Hard-code top-app's stune boost to 1"
    Mdss: use O3 compiler optimisation
    usb: fix merge derps and resolve USB tethering issues
    proc: allow Settings run in the background
    dts: whyred/tulip/wayne: selectively undervolt top CPU freq voltages to 20mV
    Revert " sched/tune: Hard-code top-app's stune boost to 1"
    Revert "vidc: restore to stock Xiaomi State"

    AGNi whyred v6.4:- (MIUI & AOSP pie)
    dts: whyred/tulip/wayne: CPU OC - Power cluster -> 1.8GHz, Performance cluster -> 2.45GHz
    dts: whyred/tulip/wayne: selectively unvervolt top and 2nd last CPU freq voltages by 40mV
    dts: sdm660-regulator: -40mV GPU Undervolt
    dts: disable dynamic fps
    camera_v2,vidc: restore to stock Xiaomi State
    kernel: Boost cpu to the max for 250ms when zygote forks
    mm: Boost cpu 250ms when memory pressure becomes high
    msm: mdss: Boost CPU when committing a new frame
    msm: kgsl: Relax adreno spin idle tight loop
    sched/tune: Hard-code top-app's stune boost to 1
    ANDROID: binder: Switch binder_deferred_lock to a spinlock
    mm: set swappiness 30 in any case
    drivers: cpufreq: Implement xiaomi power key input boost feature
    ASoC: msm: Handle bit_width to configure ASM session for FLAC playback
    kgsl/mdss: set equal scheduler priorities
    kernel/power/powersuspend: new PM kernel driver for Android w/o early_suspend
    power: qpnp-fg-gen3: fix soc not keeping full after charging overnight
    fs: update f2fs
    Update lz4 v1.8.2
    power: reset: msm: Always perform a regular reboot upon panic
    proc: Don't let Google Camera,Snapcam, miui camera and Settings run in the background
    kernel: introduce CPUSets Assist
    msm: kgsl: Dispatch commands using a master kthread
    EXT4 optimizations: Some changes for better FS performance
    Workaround for sensor ipc message causing high power consume
    mm: Do readahead if requested size is over 128 KiB
    mmc: queue: Do not attempt request merging
    mm: Increase ratelimit pages value
    mm: Do not periodically writeback data
    mm: Keep dirty pages in ram for at least 120 seconds
    mm: Do not reserve memory for admins
    kernel: Improve performance critical IRQ framework

    AGNi whyred v6.3:- (MIUI & AOSP pie)
    Merge Linux 4.4.195 & 4.4.196
    sched,camera_v2: boost scheduler to prefer BIG cores when camera in use - Part 2
    mm: set swappiness 5 in any case & zram use lz4
    dts: whyred/wayne/tulip: increase global shared DMA pool from 44M to 64M
    dts: sdm660: Increase UFS CPU latency requirement to 100 us
    wait.[ch]: Introduce the simple waitqueue (swait) implementation
    rcu: Squash commits through android kernel 4.9.96 & increase priority
    relay: Use irq_work instead of plain timer for deferred wakeup
    treewide: disable configurable debug mask logging by default
    usb_bam: disable event log by default
    net: rmnet_data: disable logging
    Revert "dts: sdm630-660-regulator: initial GPU UV"
    Revert "msm: mdss: Boost CPU when committing a new frame"

    AGNi whyred v6.2:- (MIUI & AOSP pie)
    qcacld-3.0: Merge CAF LA.UM.7.2.r1-07600
    Merge CAF LA.UM.7.2.r1-07600
    Merge Linux 4.4.194
    leds: qpnp-wled: use IRQF performance critical
    dts: sdm660: Disable expedited RCU grace periods after init & BOOT QUIETLY & devbw governor performance
    dts: disable dynamic fps & esd check
    cpuidle: lpm-levels: Do not predict LPM for isolated cpus
    cpumask: Add cpumasks for big and LITTLE CPU clusters
    ARM: dts: msm: disable ESD feature
    fpc1020: Set fingerprintd priority to max when screen is off
    ARM: dts: sdm660-gpu: Disable GPU wake up on touch event
    Revert "drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO"
    Revert "power: qpnp-fg-gen3: fix soc not keeping full after charging overnight"
    Revert "dts: whyred/tulip/wayne: increase linux,cma from 44M to 64M"
    Revert "devfreq_boost: Introduce devfreq boost driver"

    AGNi whyred v6.1:- (MIUI & AOSP pie)
    Merge Linux 4.4.193
    dts: whyred/tulip/wayne: increase linux,cma from 44M to 64M
    gpu: adreno: sdm636 function as adreno 509 on camera use and revert back to show as 512
    ion: use unbounded wq for prefetch work
    ARM: dts: sdm660-gpu: Declare cooling-cells for KGSL cooling device
    ARM: dts: sdm660: Enable CPU cooling by declaring cooling-cells
    arm64: strcmp: Align to cache and preload
    msm_rng: fix issue with unbalanced clk_put
    Optimized Console FrameBuffer for upto 70% increase in Performance
    power: qpnp-fg: Don't hold wakelocks
    drivers: gpu: adreno: compile only Adreno 5xx part
    power: qpnp-fg-gen3: fix soc not keeping full after charging overnight
    thermal: msm_thermal: Remove FIFO scheduling class
    power: qcom: Silence smb138x logger
    BACKPORT: thermal: core: using power_efficient_wq for thermal worker

    AGNi whyred v5.9:- (MIUI & AOSP pie)
    Merge linux 4.4.192
    mdss_fb: Fix sRGB reset after screen off/on
    qcacld: wifi: dont use extra optimisations
    mm: stall swappiness on battery < 25% and resume normal swappiness post 25% battery
    mm: implement UKSM
    kernel: Force trivial, unbound kthreads onto low-power CPUs
    msm: mdss: fix inconsistent mutex_lock
    fingerprint: use realtime mutex
    drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO

    AGNi whyred v5.8:- (MIUI & AOSP pie)
    Merge CAF/LA.UM.7.2.r1-07500
    Merge Wifi LA.UM.7.2.r1-07500
    gpu: adreno: sdm636 report as adreno 512 but keep functioning as adreno 509
    (enables HD graphics in games like PUBG & possibly many others)
    sound: sdm660: increase earphone clarity by reducing digital gains
    implement event based cpu boosting
    zstd zram with klapse & kcal support
    Preserve many stuff from previous version
    Also Many more stuff... refer github
    (yet to be upstreamed to latest linux 4.4.y)

    AGNi whyred v5.6:- (MIUI oreo/AOSP pie)
    Merge CAF/LA.UM.7.2.r1-06900
    Merge Wifi LA.UM.7.2.r1-06900

    AGNi whyred v5.5:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.179

    AGNi whyred v5.4:- (MIUI oreo/AOSP pie)
    Merge CAF/LA.UM.7.2.r1-06700
    Merge Wifi LA.UM.7.2.r1-06700

    AGNi whyred v5.3a:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.178
    Update f2fs
    net: crypto set sk to NULL when af_alg_release.
    arm64: Don't force FRAME_POINTER
    kernel: Boost whenever a zygote-forked process becomes a top app
    devfreq_boost: Remove unused devfreq_get_boost_dev function
    devfreq_boost: Clean up code style and update license header
    cpu_input_boost: Mark boost kthread as performance critical
    cpu_input_boost: Serialize everything with a master kthread
    cpu_input_boost: Clean up some style inconsistencies
    cpu_input_boost: Only update cpu policy for one CPU in each cluster
    cpu_input_boost: Block external boosts when the screen is turned off
    cpu_input_boost: Code style nitpicks
    cpu_input_boost: Clean up code style and update license header
    cpu_input_boost: Eliminate spin lock by using atomic cmpxchg loop
    cpu_input_boost: Simplify bitwise operations used to store boost state
    cpu_input_boost: Fix and refactor max boost logic
    cpu_input_boost: expose input freqs and duration to userspace
    cpu_input_boost: Add API for boosting all CPUs to max frequency
    msm: kgsl: Increase worker thread priority
    msm: mdss: Boost cpubw devfreq device when a new frame is ready
    kernel: Boost cpubw devfreq device to the max for app launches
    kernel: Boost all CPUs to the max when userspace launches an app
    devfreq: Introduce devfreq boost driver
    cpu_input_boost: Destroy workqueue on error path in init
    cpu_input_boost: Introduce driver for event-based CPU boosting
    qcacld-3.0: Fix uninitialized iface pointer dereference

    AGNi whyred v5.2:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.177
    ARM: dts: msm: enable ULPS and ULPS suspend modes for whyred/tulip panels

    AGNi whyred v5.1:- (MIUI oreo/AOSP pie)
    Implement KLapse - A kernel level livedisplay module v4.0
    interactive: avoid calling usecs_to_jiffies() repeatedly
    crypto: boost performance -O3
    soc: qcom: service-locator: Use interruptible wait for locator
    tulip: pa_therm0 fixup
    dts: sdm6xx: reduce cpu uv to -80mV

    AGNi whyred v5.0:- (MIUI oreo/AOSP pie) MAJOR Update
    Merge CAF LA.UM.7.2.r1-05900, LA.UM.7.2.r1-06500
    qcacld-3.0 wifi: merge LA.UM.7.2.r1-05900, LA.UM.7.2.r1-06500
    Merge kernel.org 4.4.173, 4.4.174, 4.4.175, 4.4.176

    whyred/tulip: cpu OC/UC squash of these commits by mihranz7
    dts: sdm630-660-regulator: initial GPU UV

    binder: create node flag to request sender's security context
    msm: thermal: Import Xiaomi changes
    Merge remote-tracking branch 'f2fs-stable/linux-4.4.y'
    BACKPORT: userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
    qpnp-haptic: use aosp specific version for AGNi pie
    dts: update GPU ID to use Adreno 512
    Fix direct references to HZ (squashed commit)
    msm-tsens: Reschedule work instead of causing uninterruptible sleep
    AIO: Don't plug the I/O queue in do_io_submit()
    binfmt_elf.c: use get_random_int() to fix entropy depleting
    pwm: qpnp: Fix qcom HW known issue
    tick: don't update idle time if cpu offline
    sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire
    Readahead: Optimize divide/multiply by power of 2 using L/R shift
    int_sqrt: Improve 3x faster integer sqrt.
    int_sqrt: correction square root algo with naming
    dts: change cont_splash_mem splash_region to stock
    arm64: crypto: Improve target optimization flags
    BACKPORT: arm64: ensure the kernel is compiled for LP64
    arm: dts: sdm660-bus: double the GPU's buswidth
    Revert "kgsl/mdss: Increase priorities of RT threads"
    Revert "Disable optimisation at some places"
    Revert "qpnp-fg-gen3: Limit how frequently fg data can be queried"

    AGNi whyred v4.9:- (MIUI oreo/AOSP pie)
    arm64: add support for speculative page faults
    block: squashed update BFQ IO scheduler to v8r12
    f2fs support for PIE
    fs/select: use freezable blocking call
    selinux: option to disable all logging
    crypto,ext4: arm64/speck - add NEON-accelerated implementation of Speck-XTS
    usb: increase max current to 2000mA
    Disable compiler optimisation at some places
    Merge remote-tracking branch 'aosp/android-4.4' into pie
    revert "kernel: Force trivial, unbound kthreads onto low-power CPUs"

    AGNi whyred v4.8:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.172
    disable tracing at various places Part 3 [FIX: MAJOR DERP AFFECTING MAGISK MODULES]
    f2fs supported [ AGNi Pie variants]
    input: goodixfp: Mark IRQ as performance critical
    sched: hmp: Reduce number of load reports in a window
    sched: cpufreq: HMP load reporting changes
    core_ctl: Consider high irq loaded CPU as busy
    PM / devfreq: memlat: Don't ignore extremely latency sensitive workloads
    cfq-iosched: temporarily boost queue priority for idle classes
    qpnp-fg-gen3,smb-lib: disable some excessive logging
    lmk: add some packages to whitelist
    dts: tulip: Increase power button debounce time
    dts: tulip: add HDR Support Display & values
    dts: tulip: remove verify flags & optimise system/vendor mount flags
    and many more- refer github

    AGNi whyred v4.6:- (MIUI oreo/AOSP pie)
    msm: mdss: Mark display-wake kthread as performance critical
    msm: mdss: Power on display asynchronously as early as possible
    msm: kgsl: Mark IRQ and worker thread as performance critical
    kernel: Force trivial, unbound kthreads onto low-power CPUs
    power: reset: Allow device to preserve memory on restart

    AGNi whyred v4.5:- (MIUI oreo/AOSP pie)
    mdss: set proper brightness values for AGNi MIUI and aosp builds
    kgsl: Mark IRQ as performance critical
    input: fpc1020: Mark IRQ as performance critical
    msm: mdss: Mark IRQ and important kthreads as performance critical
    kernel: Add API to mark IRQs and kthreads as performance critical
    sched/core: nr_migrate = 128 increases number of tasks to iterate in a single balance run.
    sched/idle: Micro-optimize the idle loop
    qdsp6v2: dts_eagle: use newer drivers
    ASoC: msm: qdsp6v2: Set decoder output to 24 bit
    random: Use /dev/urandom instead of /dev/random
    Fix direct references to HZ (squashed commit)

    AGNi whyred v4.4:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.171
    Merge new Xiaomi opensource for Redmi Note5, XiaoMi 6X, Redmi Note6 Pro
    fs/ext4: drivers/block/loop: revert to Xiaomi Sources state (fix magisk modules issues)
    Revert "msm: camera: isp: Handle frame drop due to delay"
    Revert "qcacld-3.0: Add bound check for fixed_param->total_num_tx_power_levels" [PIE]
    Revert "ANDROID: dm verity: add minimum prefetch size"
    set selinux permissive (PIE & for MIUI to avoid some magisk module issues)

    AGNi whyred v4.3:- (MIUI oreo/AOSP pie)
    set MDSS_MAX_BL_BRIGHTNESS 4095
    selinux: add security in-core xattr support for esdfs,f2fs,tmpfs,exfat,sdcardfs
    CHROMIUM: selinux: Do not log "permissive" denials
    selinux: fix FORCE PERMISSIVE option

    AGNi whyred v4.2:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.170
    mm/mincore.c: CVE-2019-5489 Change mincore() to count "mapped" pages rather than "cached" pages
    merge CAF LA.UM.7.2.r1-05800-sdm660.0
    qcacld-3.0: merge LA.UM.7.2.r1-05800-sdm660.0
    Merge upstream-f2fs-stable-linux-4.4.y into android-4.4
    kernel/fs: fix I/O wait not accounted for RW O_DSYNC
    strcmp: align to 64B cache line
    fs: sdfat: Update to version 2.1.8
    arm64: Add 32-bit vDSO support
    whyred: update GPU ID to use Adreno 512
    BACKPORT: time: Clean up CLOCK_MONOTONIC_RAW time handling
    timekeeping: Get rid of pointless typecasts
    whyred: DTS: update HDR value from Pocophone
    mm: ratelimit swap write errors
    timekeeping: Get rid of pointless typecasts
    BACKPORT: arm/syscalls: Optimize address limit check
    UPSTREAM: syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
    BACKPORT: arm64/syscalls: Check address limit on user-mode return
    BACKPORT: lkdtm: add bad USER_DS test
    UPSTREAM: bug: switch data corruption check to __must_check
    BACKPORT: lkdtm: Add tests for struct list corruption
    UPSTREAM: bug: Provide toggle for BUG on data corruption
    UPSTREAM: list: Split list_del() debug checking into separate function
    UPSTREAM: rculist: Consolidate DEBUG_LIST for list_add_rcu()
    BACKPORT: list: Split list_add() debug checking into separate function
    zsmalloc: calling zs_map_object() from irq is a bug
    zram: allow zram to allocate CMA pages
    UPSTREAM: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl
    BACKPORT: block/loop: set hw_sectors
    UPSTREAM: loop: add ioctl for changing logical block size

    AGNi whyred v4.0:- (MIUI oreo/AOSP pie)
    Merge kernel.org 4.4.169
    mm: fix replace get_user_pages() write/force parameters with gup_flags
    Merge kernel.org 4.4.168
    Merge kernel.org 4.4.167
    wireguard: Limit connection time to 30 seconds
    Remove Qualcomm's panic changes
    ANDROID: uid_sys_stats: Copy task_struct comm field to bigger buffer
    FROMGIT,BACKPORT: mac80211-next: rtnetlink wifi simulation device
    UPSTREAM: binder: fix race that allows malicious free of live buffer
    msm:mdss: add HDR support for SDM660
    ARM: dts: sdm660: tas2557: enable 32 bit data
    asoc: tas2557: bb noise kanged from HTC source
    arm: dts: msm: sdm660-audio: add missing nodes
    asoc:sdm660:enable sampling rates up to 384khz for mi2s
    arm:dts: enable partial update for whyred panels
    arm:dts:enable dynamic fps for whyred panels

    AGNi whyred v3.9r2:- (MIUI oreo/AOSP pie)
    Merge CAF LA.UM.7.2.r1-05400 & LA.UM.7.2.r1-05500
    qcacld-3.0: Merge LA.UM.7.2.r1-05500
    soc: qcom: Remove now unused MSM_SMP2P_TEST
    mdss_fb: set backlight_max as 4095 default
    revert: "msm:mdss: add HDR support for SDM660
    revert: "asoc:sdm660:enable sampling rates up to 384khz for mi2s"
    revert: "arm: dts: msm: sdm660-audio: add missing nodes"
    revert: "asoc: tas2557: bb noise kanged from HTC source"
    revert: "ARM: dts: sdm660: tas2557: enable 32 bit data"
    revert: "arm:dts: enable partial update for whyred panels
    revert: "arm:dts:enable dynamic fps for whyred panels
    revert: "mdss: WIP - try to fix kcal reset on panel power cycle

    AGNi whyred v3.8:- (MIUI oreo/AOSP pie)
    rebased on LA.UM.7.2.r1-05300 (CAF sources for PIE) and all its previous tags merged
    all previous features/commits retained (same as before)

    AGNi pureMIUI-O whyred v3.7:-
    disable tracing/logging at various places Part 6
    msm: kgsl: Correctly limit max number of contexts per process
    msm: kgsl: Wake GPU upon receiving an ioctl rather than upon touch input
    msm: kgsl: Remove POPP
    dts: whyred: fix huaxing nt36672 fhd video mode dsi panel support
    dts: whyred: Increase power button debounce time
    selinux set enforcing

    AGNi pureMIUI-O whyred v3.6:-
    sdcardfs updates
    Merge kernel.org 4.4.166 with some tracing disabled

    AGNi pureMIUI-O whyred v3.5:-
    Update adreno-kgsl,binder,char,iommu,ion from LA.UM.7.2.r1-05300

    AGNi pureMIUI-O whyred v3.4:-
    Merge kernel.org 4.4.165

    AGNi pureMIUI-O whyred v3.3:-
    Merge kernel.org 4.4.164
    msm:mdss: add HDR video support for SDM660
    mdss: kcal: port AGNi Screen Modes v1.2 from kenzo (Bug: kcal reset on screen off)
    msm: mdss: kcal: Use PCC for negative display mode
    fs: sdfat: Add MODULE_ALIAS_FS for supported filesystems
    BACKPORT: mm: fix pageblock heuristic
    ion: avoid allocate high order of pages in system heap pools
    serial: msm_serial_hs: Protect spurious irqs after wakeup irq enablement
    tty: check before stopping kthread
    msm_serial_hs: make the Bluetooth tty thread RT
    tty: add tty_port_set_policy function
    tty: move tty_port workqueue to be a kthread
    Make msm_serial_hs RT to improve bluetooth performance
    do not call trace_printk on non-debug build
    remove calls to trace_printk
    mm: set swappiness to 5 and lock it there
    tcp_output: set initial TCP window size to 64K (speed improvement)
    ARM: dts: sdm660: tas2557: enable 32 bit data
    fs: update pstore & f2fs
    sdm660-pm: update LPM values for power cluster
    BACKPORT: drivers: cpuidle: lpm-levels: Fix KW issues with idle state idx < 0
    sdm660-pm: set LPM parameters from SDM845
    BACKPORT: lpm-levels: Add support to parse LPM parameters
    BACKPORT: msm: ipa: avoid wakelock acquire/release during data
    scsi: ufs: Avoid writing null to Boot LUN enable attribute
    BACKPORT: security: pfe: Use non blocking scm call
    soc: qcom: scm: Add a noretry variant for scm_call2
    thermal: qpnp-adc-tm: release lock upon disable_chan_meas failure
    diag: Featurize IPC logging
    clk: qcom: fix -Wself-assignment warning
    msm: ipc_logging: Disable ipc_log_string
    UPSTREAM: block: silently forbid sending any ioctl to a partition
    ANDROID: mm: add config for default readahead size & set 1024kb default
    soc: qcom: glink: Add downvote of transport during SSR
    msm: bus_arb: disable debug logging

    AGNi pureMIUI-O whyred v3.2:-
    Merge kernel.org 4.4.163
    try to resolve compatibility with MiuiPro/Masik roms
    mm: skip swap readahead when process is exiting
    ASoC: msm: qdsp6v2: Add volume control for capture streams
    BACKPORT: clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
    asoc:sdm660_cdc: sound control: fix microphone gain
    arm:dts: enable partial update for whyred panels
    arm:dts:enable dynamic fps for whyred panels
    msm: camera: isp: Fix memory leaks in vfe probe
    ASoC: msm: qdsp6v2: Fix offload gapless transition
    sched/topology: fix ignored-qualifiers warning
    net_sched: keep backlog updated with qlen
    qseecom: fix memory leak in qseecom_start_app()
    qpnp-fg-gen3: Limit how frequently fg data can be queried
    ASoC: msm: qdsp6v2: Add mutex protection for rtac cal apis
    arm64: support __int128 on gcc 5+
    arm64: lib: rewrite and optimize memcmp
    arm64: Add support ARCH_SUPPORTS_INT128
    [SQUASH] Treewide: Fix direct references to HZ
    drivers: fix Initial import of DTS-Eagle driver
    asoc: msm: sdm660: use 24 bit format for PRIM_MI2S by default
    asoc: tas2557: bb noise kanged from HTC source
    arm: dts: msm: sdm660-audio: add missing nodes
    asoc:sdm660:enable sampling rates up to 384khz for mi2s
    qcacld-3.0: Reduce qcom_rx_wakelock timeouts to 7 seconds
    sound: DTS-Eagle integration
    drivers: Initial import of DTS-Eagle driver
    Kconfig: msm: remove deprecated dts eagle driver
    block: modify fiops
    UPSTREAM: net: sk_pacing_shift_update() helper
    UPSTREAM: tcp: allow drivers to tweak TSQ logic
    UPSTREAM: net: allow per netns sysctl_rmem and sysctl_wmem for protos
    UPSTREAM: tcp: implement TSQ for retransmits
    UPSTREAM: tcp-tso: do not split TSO packets at retransmit time
    tcp_westwood: tune up a bit
    tcp_westwood: make 'rtt_min' and 'init_rtt' tunables and remove HZ dependency
    tcp_westwood: use tcp_jiffies32 instead of tcp_time_stamp
    tcp_westwood: fix tcp_westwood_info() style mistakes
    tcp: replace cnt & rtt with struct in pkts_acked()
    kgsl: convert some workqueues to use kthreads
    Agile-SD : TCP congestion controller
    msm: kgsl: run kgsl-workqueue as a high prio wq
    mdss: Update RT priority
    mdss: rotator: Use FIFO kthread for rotator work
    msm-tsens: remove HZ dependency
    ANDROID: fsnotify: Notify lower fs of open
    block: tweak maple credits to @GUYVER91
    msm: kgsl: Correctly limit max number of contexts per process
    msm: kgsl: Limit the maximum number of contexts
    BACKPORT: msm: kgsl: Keep dispatcher halted during SUSPEND state
    mdss: fix inconsistent mutex_lock
    msm: mdss: fix inconsistent mutex_lock
    msm: mdss: fix inconsistent mutex_lock
    slimbus: fix inconsistent mutex_lock
    qdsp6v2: fix inconsistent mutex_lock
    wcd9335: fix inconsistent mutex_lock
    msm: qdsp6v2: fix inconsistent spin_lock
    msm_cci: fix inconsistent mutex_lock
    ARM: dts: sdm660: Set GPU idle timeout to 64 ms
    msm: kgsl: Wake GPU upon receiving an ioctl rather than upon touch input
    soc: qcom: service-locator: Fix memory leak in pd_locator_work()
    soc: qcom: watchdog_v2: Fix memory leaks when memory_dump_v2 isn't built
    crypto: Make CRYPTO_DEV_QCE depend on CRYPTO_DEV_QCRYPTO being disabled
    msm: kgsl: Remove POPP
    UPSTREAM: binder: replace "%p" with "%pK"
    zram: add zstd to the supported algorithms list
    asoc/msm: Reduce min capture size

    AGNi pureMIUI-O whyred v3.1:-
    Merge LA.UM.6.2.r1-11400
    qcacld-3.0: Merge LA.UM.6.2.r1-11400-sdm660.0
    selinux: cumulative fixes, set permissive mode but show enforcing (to fix many denials seen in miui roms)
    revert: "drivers/md: disable dm-verity"
    tcp: introduce tcp_jiffies32
    uapi: Define __BITS_PER_LONG based on compiler target
    fs/exec: fix use after free in execve
    kernel: Fix potential refcount leak in su check

    AGNi pureMIUI-O whyred v3.0:-
    Merge kernel.org 4.4.162
    disable zcache, cleancache
    set selinux enforcing by default

    AGNi pureMIUI-O whyred v2.9:-
    mm/zcache: use lz4 compression and set max pool to 7% of total ram
    Merge kernel.org 4.4.161
    qcacld-3.0: Merge LA.UM.6.2.r1-11300-sdm660.0
    Merge LA.UM.6.2.r1-11300

    AGNi MIUI Oreo whyred v2.8:-
    Merge kernel.org 4.4.160
    disable tracing/logging at various places Part 5
    enable TRANSPARENT_HUGEPAGE_MADVISE,cleancache,zcache
    AGNi pureMIUI-O whyred v2.7:-
    kgsl/mdss: Increase priorities of RT threads
    drivers/power: disable bcl
    msm_thermal: check temp only if probed and set 1sec poll time
    fs: Introduce Reboot Auto File Sync v1.0 driver
    qpnp-fg-gen3: disable debug
    dts: implement gpu fixups
    AGNi pureMIUI-O whyred v2.6:- (Rebuilt from scratch)
    Merge kernel.org 4.4.159
    qcacld-3.0: merge LA.UM.6.2.r1-10900
    Merge LA.UM.6.2.r1-10900-sdm660.0
    qcacld-3.0: Merge LA.UM.6.2.r1-10500-sdm660.0
    Merge LA.UM.6.2.r1-10500-sdm660.0
    Merge LA.UM.6.2.r1-10300-sdm660.0
    Merge LA.UM.6.2.r1-09500-sdm660.0
    Merge LA.UM.6.2.r1-09300-sdm660.0
    Merge LA.UM.6.2.r1-08900-sdm660.0
    Merge LA.UM.6.2.r1-08700-sdm660.0
    Merge LA.UM.6.2.r1-08500-sdm660.0
    Merge LA.UM.6.2.r1-08100-sdm660.0
    Merge LA.UM.6.2.r1-08000-sdm660.0
    Merge LA.UM.6.2.r1-07700-sdm660.0
    Merge LA.UM.6.2.r1-07400-sdm660.0
    Merge LA.UM.6.2.r1-07200-sdm660.0
    Merge LA.UM.6.2.r1-06900-sdm660.0
    Merge LA.UM.6.2.r1-06500-sdm660.0
    update wireguard

    many more commits


    DOWNLOAD from Dropbox

    XDA:DevDB Information
    AGNi kernel (Blazing Fast & Efficient Kernel), Kernel for the Xiaomi Redmi Note 5 Pro

    Contributors
    psndna88
    Source Code: https://github.com/psndna88/AGNi_pureMIUI.git

    Kernel Special Features: Based on caf LA.UM.8.2.r1-07300 with selectively picked mods/patches

    Version Information
    Status: Stable
    Current Stable Version: 9.9.1
    Stable Release Date: 2020-09-23

    Created 2018-10-20
    Last Updated 2020-09-26
    11
    AGNi whyred v6.3:- (MIUI & AOSP pie)

    Merge Linux 4.4.195 & 4.4.196
    sched,camera_v2: boost scheduler to prefer BIG cores when camera in use - Part 2
    mm: set swappiness 5 in any case & zram use lz4
    dts: whyred/wayne/tulip: increase global shared DMA pool from 44M to 64M
    dts: sdm660: Increase UFS CPU latency requirement to 100 us
    wait.[ch]: Introduce the simple waitqueue (swait) implementation
    rcu: Squash commits through android kernel 4.9.96 & increase priority
    relay: Use irq_work instead of plain timer for deferred wakeup
    treewide: disable configurable debug mask logging by default
    usb_bam: disable event log by default
    net: rmnet_data: disable logging
    Revert "dts: sdm630-660-regulator: initial GPU UV"
    Revert "msm: mdss: Boost CPU when committing a new frame"

    Gooogle Drive Link v6.3
    10
    AGNi whyred v8.8 EAS:-
    * improved gaming experience
    * improved apps multitasking
    * clearer speaker sound
    * user can force selection of old-camera or new-camera libs support

    Detailed Changelog:-
    Merge kernel 4.4.228
    AGNi memory monitor: dynamic swappiness for zram v2.1
    AGNi: add options to force select Old cam & new cam support
    touchscreen: nvt_d2s: resolve jasmine dt2w
    Built using GCC 10.0.1
    sound: sdm660: increase speaker clarity by reducing digital gains
    ASoC: sdm660-internal: switch to tas2557 ASI2 DAI for Primary MI2S Playback
    irqchip: fix GCC 10 section mismatch warning
    sched: Makefile: remove duplicity
    Revert "power: drop caches on charger connect/disconnect"


    DOWNLOAD v8.8
    10
    AGNi whyred v4.4:- (MIUI oreo/AOSP pie)

    Merge kernel.org 4.4.171
    Merge new Xiaomi opensource for Redmi Note5, XiaoMi 6X, Redmi Note6 Pro
    fs/ext4: drivers/block/loop: revert to Xiaomi Sources state (fix magisk modules issues)
    Revert "msm: camera: isp: Handle frame drop due to delay"
    Revert "qcacld-3.0: Add bound check for fixed_param->total_num_tx_power_levels" [PIE]
    Revert "ANDROID: dm verity: add minimum prefetch size"

    Download: Google drive