[KERNEL][3.0.31][FULL HD][HDMI][GUIDE 1.8]JBX-Kernel Hybrid [1,5ghz]

[stigers]

4-16 Build giving terrific battery life

Sent from my xt908 cm 11 blacked out

I think if the battery drainage of Android OS is less than Android system, the system battery is OK. In your usage, Android OS drainage less then 10% will OK, and you data is a little higher.

 

[fantasy2c]

I restarted phone roughly 6-7 hours ago and installed updated 4-16 kernal so the stats aren't perfectly accurate but these are normal wakelocks I receive everyday and still pull 4-5 hours, sometimes more, screen on time. I normally get fine deep sleep time but I know I can manage more because I've seen 8hrs + screen time on jbx on a friends RAZR maxx.

Most of wakelocks on kernel side I can't find any info on but get them on jbx and stock cm11 kernal with hardly any apps installed currently and even on clean install. I'm not complaining by any means as I'm about at stock battery life and was, at one point 2.5 hrs screen on time and phone was almost dead lol

Sent from my xt908 cm 11 blacked out

 

[pescorilo]

4/10 had better battery performance. But as said, this build 4/16 is a pretty hybrid and beta version

Sent from my XT910 using Tapatalk

 

[fantasy2c]

I understand, battery on 4-16 is close to 3-15 which was beat for me...I've been dealing with these wakelocks since kk started. Everything has gotten a lot better since the 3-15 kernel.

Dtail has done some amazing work for all of us, that is for sure!

Sent from my xt908 cm 11 blacked out

 

[dubisz]

@dtrail1 Battery life in the newest build seems to be very close to the one of 15.03 build! Great job! Will test some more and report back, but I'm pretty optimistic.

 

[BeSalecker]

New Build is working Fantastically! Great Work Dtrail. Just wondering though, what ROM is everyone currently using with JBX? I'm on SlimKat 4.2 and couldn't be happier. Keep up the great work we all appreciate it so much!

 

[dtrail1]

Nice to hear that! And it'S really great to see that hours, days, sleepless nights and all users effort and support finally resulting in something just working great! Thank you!

Now I'm going to port over more power saving patches from a specific tegra kernel, from another Gnex kernel and add/extend my own kernel modules.

 

[By.TRabZonLu™]

Nice to hear that! And it'S really great to see that hours, days, sleepless nights and all users effort and support finally resulting in something just working great! Thank you!

Now I'm going to port over more power saving patches from a specific tegra kernel, from another Gnex kernel and add/extend my own kernel modules.

big thanks. I know little English. Liquidsmooth 3.0 ROM I'm using. JBX which version should I set?

 

[crackerjack1957]

Settings work very well!!!

:laugh::good: The followin' settin's work well for "daily" use!!
General:
TCP Congestion Control "cubic"
Read Ahead Buffer Size "2048"
Scheduler "vr"
Frequency Lock "on" (I have "Donate" version so I rename "unnamed" Frequency Profile to "Smooth Kat")
Governor "ktoonservative"

Specific:
Intelli-Plug "on"
Multicore Power Saving "0"
FSYNC "off"
Generic Hotplug "off"
Core OC "100"
GPU Governor "on3demand"
GPU Max Frequency "384"
IVA OC "off"
MPU OC "100"
ZRAM "off"
Battery Friend "on"

Screen:
Color Profile "Easy Eyes Kat" (renamed "Donate" version)
Gamma Adjustment "6"
Front Buffer Delay "25"

Hope this helps, I'm hard on device, and these settin's make device feel snappy, smooth, no fc's or random reboots, plus I leave HDMI "enabled"!! :highfive::good:

Medicus curat, natura sanat

Tolle Arbeit dtrail1 :highfive::good:

Soundgirl, your settings work very well in JBX kernel!!!
Would you mind keeping us updated on changes in settings that work well for you?
Some people like moi are not capable of tweaking settings for optimal performance!!!
Would be nice if there was a sticky or thread on JBX kernel settings that were working well for others.

Thanks again soundgirl & dtrail of course!!!!:good:

 

[neo.ank]

Brilliant work @dtrail1. Running 4/16 build. Battery life is amazing and so is the performance. You are a life-saver.

Soundgirl, your settings work very well in JBX kernel!!!
Would you mind keeping us updated on changes in settings that work well for you?
Some people like moi are not capable of tweaking settings for optimal performance!!!
Would be nice if there was a sticky or thread on JBX kernel settings that were working well for others.

Thanks again soundgirl & dtrail of course!!!!:good:

I've been thinking the same. Let's start one for settings specifically for JBX.

DROID RAZR with Tapatalk 4

 

[Mr-Glass]

Brilliant work @dtrail1. Running 4/16 build. Battery life is amazing and so is the performance. You are a life-saver.



I've been thinking the same. Let's start one for settings specifically for JBX.

DROID RAZR with Tapatalk 4

Agreed - the 4/16 is the first (for me) JBX that is usable for me.. Kudos on the Battery life!!! @dtrail1

 

[neo.ank]

Hey I've started a settings and discussion thread in general section. Lets share our configuration and results.

[DISCUSSION] The JBX Kernel settings/configuration discussion and testing thread.

 

[JakeDHS07]

I have never had signal issues and have always had LTE and never even seen the orange Google server problems everyone speaks of. Therefore I highly suggest everyone do what I did as clearly it helps.
1. Boot into stock ROM
2. Download Titanium backup and APN Backup & Restore
3. Using Titanium make APN a system app
4. Go into a explorer (Root Explorer or the like) move APN app from /system/app to /system/priv-app. (Required for jelly bean plus).
5. Open APN app. Ignore message and tap disable ICS check.
6. Backup the apns from stock ROM.
7. Boot into CM
8. Repeat steps 2-5 as necessary
9. Restore Stock APNs to CM choosing to overwrite and existing duplicated. (Keep clutter down)
10. If you choose to you can then make a backup of the now merged stock and cm apns that have been merged under your cm slot (I did just in case I ever need them)
This should help anybody that has issues. If anybody with a XT912 Verizon doesn't have time or has a recent version of CM that they don't like the apns for I have a stock +CM APN backup from months ago that will work for you and all you would have to do is go into APN backup and restore under cm and restore the file I give you (after setting up the app like I told you obviously). So if anybody wants that I will upload later. Also in case anyone is wondering the app needing to be system app was due to a permissions change that began in ICS where apns became unaccessible to other apps and the move to priv-app became necessary upon jelly bean due to further permission changes. But if you follow my instructions everything will work on 4.1-4.4 and you should be good to go with more stability and fully working LTE, 3G, everything.

 

[BeSalecker]

I have never had signal issues and have always had LTE and never even seen the orange Google server problems everyone speaks of. Therefore I highly suggest everyone do what I did as clearly it helps.
1. Boot into stock ROM
2. Download Titanium backup and APN Backup & Restore
3. Using Titanium make APN a system app
4. Go into a explorer (Root Explorer or the like) move APN app from /system/app to /system/priv-app. (Required for jelly bean plus).
5. Open APN app. Ignore message and tap disable ICS check.
6. Backup the apns from stock ROM.
7. Boot into CM
8. Repeat steps 2-5 as necessary
9. Restore Stock APNs to CM choosing to overwrite and existing duplicated. (Keep clutter down)
10. If you choose to you can then make a backup of the now merged stock and cm apns that have been merged under your cm slot (I did just in case I ever need them)
This should help anybody that has issues. If anybody with a XT912 Verizon doesn't have time or has a recent version of CM that they don't like the apns for I have a stock +CM APN backup from months ago that will work for you and all you would have to do is go into APN backup and restore under cm and restore the file I give you (after setting up the app like I told you obviously). So if anybody wants that I will upload later. Also in case anyone is wondering the app needing to be system app was due to a permissions change that began in ICS where apns became unaccessible to other apps and the move to priv-app became necessary upon jelly bean due to further permission changes. But if you follow my instructions everything will work on 4.1-4.4 and you should be good to go with more stability and fully working LTE, 3G, everything.

I would really appreciate you uploading that file. I have SlimKat running on stock slot and it would be a bit much to restore the stock ROM to make a backup.

 

[seandop]

I have never had signal issues and have always had LTE and never even seen the orange Google server problems everyone speaks of. Therefore I highly suggest everyone do what I did as clearly it helps.
1. Boot into stock ROM
2. Download Titanium backup and APN Backup & Restore
3. Using Titanium make APN a system app
4. Go into a explorer (Root Explorer or the like) move APN app from /system/app to /system/priv-app. (Required for jelly bean plus).
5. Open APN app. Ignore message and tap disable ICS check.
6. Backup the apns from stock ROM.
7. Boot into CM
8. Repeat steps 2-5 as necessary
9. Restore Stock APNs to CM choosing to overwrite and existing duplicated. (Keep clutter down)
10. If you choose to you can then make a backup of the now merged stock and cm apns that have been merged under your cm slot (I did just in case I ever need them)
This should help anybody that has issues. If anybody with a XT912 Verizon doesn't have time or has a recent version of CM that they don't like the apns for I have a stock +CM APN backup from months ago that will work for you and all you would have to do is go into APN backup and restore under cm and restore the file I give you (after setting up the app like I told you obviously). So if anybody wants that I will upload later. Also in case anyone is wondering the app needing to be system app was due to a permissions change that began in ICS where apns became unaccessible to other apps and the move to priv-app became necessary upon jelly bean due to further permission changes. But if you follow my instructions everything will work on 4.1-4.4 and you should be good to go with more stability and fully working LTE, 3G, everything.

I don't usually have problems with data anymore, but I wouldn't mind downloading your unmolested stock APN file. I don't trust mine -- it's got some weird extra CDMANai entry... [emoji19]

Sent from my XT912 using Tapatalk

 

[1droidmod]

R u wanting apn-conf.xml from stock 4.1.2??

XT912 RaZR SpYdEr CDMA
hit ThAnKs if I was helpful!!!

 

[JakeDHS07]

http://www.mediafire.com/?o09oe7qvi19mo2s

Here is the link for stock + cm 11 apns. Restore this on cm 11 ROM for great signal and service.

WARNING: This is for XT912 CDMA Verizon models only. Do not install on XT910 GSM

DROID RAZR MAXX CM 11 JBX KERNEL

 

[seandop]

R u wanting apn-conf.xml from stock 4.1.2??

XT912 RaZR SpYdEr CDMA
hit ThAnKs if I was helpful!!!

Yes. Preferably from a device that hasn't needed to sbf back to 4.1.2 using publicly-posted flashboot files (which is where I suspect the strange APN entry came from somehow).

Sent from my XT912 using Tapatalk

 

[Super_Luddite]

http://www.mediafire.com/?o09oe7qvi19mo2s

Here is the link for stock + cm 11 apns. Restore this on cm 11 ROM for great signal and service.

WARNING: This is for XT912 CDMA Verizon models only. Do not install on XT910 GSM

DROID RAZR MAXX CM 11 JBX KERNEL

Could you explain to me like a 5 year old exactly what this does? Does this just help for faster lte/data grabbing with xt912 on big red? Could this possibly be used for another ROM like LS or SlimKat? Does this reduce data drops? Thanks for all of your help btw! Great work

 

[JakeDHS07]

These are the stock and cm added access point networks (apns) they are the available connections that the phone can use. They will work on any XT912 roms using Verizon service. Should improve signal, reduce data drops etc. Very solid connection for me with the APN backup I provided. Use my earlier instructions and the APN backup & restore app to restore that .XML backup and reboot + profit

DROID RAZR MAXX CM 11 JBX KERNEL