[KERNEL][3.0.8 / 3.0.68] LG Optimus One Family (by androidarmv6)

[DJNoXD]

This thread is about the 3.0.x kernel developmend by androidarmv6 team.
Sources: github

Whats working:

- Camera / Video
- Phone/Network
- Airplane Mode
- Display
- Backlight
- All Hardware Buttons
- Hardware lights
- All sensors (Compass, Accelerometer, Proximity)
- Charger Detection
- Battery Driver
- Touchscreen Driver
- SD-Card
- WiFi
- ADB
- USB
- Vibrator
- Audio / Sound
- GPS
- Bluetooth
- OC
- data limit (thanks sweetnsour)
- switched mainline kernel to 3.0.8 kernel (for better stability)
- adding 3.0.68 kernel for testing

Version History

[Alpha1]
- first release (it boots)

[Alpha2]
- Camera
- OC
- smartassv2
- SIO-scheduler
- some novatek related stuff
- KSM
- zRAM
- codeaurora Patches

[Alpha3]
- 3.0.8 kernel for better stability
- WLAN fix updated

[Beta1]
- acpuclock: OC stability fixes
- p500: Fix proximity sensor (thanks cyrix.vs)
- drivers: staging: snappy compression added and enabled

[Beta2]
- one file for all four devices
- tripple buffer ready

[Beta3]
- Bring back split configs
- LCD: Fix deadlock on displaying to panel
- LCD: Enable dithering on mdp dma operation
- Cleanup and include some LG things from 2.6

[Beta4]
- config: enable data limit
- net: fix bcm4325
- Enable deep sleep on BCM4325
- Build event debugger as module (to prevent log spam)

[Beta5]
- touchscreen: mcs6000: update
- LGE_POWER_ON_STATUS_PATCH
- Forward port bluetooth drivers from jb_mr1_chocolate

Normally, you don't need to flash this kernel if you are using the latest cm10.1 jenkins builds.

Kernel 3.0.68
Kernel 3.0.68 beta2

 

[Bytecode]

Very nice DjNoXD for the record,I tested a build yesterday from jenkins,and the modem seemed ok. But I could not get to the lockscreen

 

[DJNoXD]

Very nice DjNoXD for the record,I tested a build yesterday from jenkins,and the modem seemed ok. But I could not get to the lockscreen

Which device do you have, the p500?
if yes, than I can give you my testkernel.

I have some uncommited changes, that I have to sort before I commit them.

 

[borchaniz]

i want to test the kernel do i need a wipe??

 

[pt.jcosta]

Re: [KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

It's work in cm10.1? Deep sleep work?

Sent from my LG-P500 using xda app-developers app

 

[DJNoXD]

i want to test the kernel do i need a wipe??

You wont need.
But testing makes absolutly no sense for non developers, because its absolutly not stable.
You want be lucky with it.

The kernels compiled by jenkins are 100% not up to date at the moment.
But before you ask, my test kernels (I created for me) are only shared with other developers.
There is absolutly no support for this kernel at the moment (->development thread).

 

[DJNoXD]

It's work in cm10.1? Deep sleep work?

Sent from my LG-P500 using xda app-developers app

No, ist not included in cm.
And I don't know if deep sleep works, because of the modem reboot problem.

 

[pt.jcosta]

Re: [KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

Fix your kernel v2.5.9 for cm10.1 works well and deep sleep works sometimes.
The problem is that a lot of battery drain when connected via wifi.

Sent from my LG-P500 using xda app-developers app

 

[Bytecode]

Which device do you have, the p500?
if yes, than I can give you my testkernel.

I have some uncommited changes, that I have to sort before I commit them.

Yes,the p500. From what I hear from Rashed,the p505/6 is having some issues.
The build I tested was a fresh oven jenkins with no change whatsoever,so yes you may want to give me your testkernel

 

[sweetnsour]

Re: [KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

Would this kernel support ICS once it is complete? If I remember correctly, ICS is supposed to run a 3.0 kernel.

Sent from my LG-P509

 

[kprsnt]

Would this kernel support ICS once it is complete? If I remember correctly, ICS is supposed to run a 3.0 kernel.

Sent from my LG-P509

yes it supports

for me when I flashed on icysnap in airplane mode
it boots n after some time it reboots..

when I flashed over cm 10.1 with this kernal Bluetooth is working for me in airplane mode

 

[xu3sno]

Did linux detect P500 device with this kernel as Linux File-CD Gadget instead of a modem?

 

[Rashed97]

Would this kernel support ICS once it is complete? If I remember correctly, ICS is supposed to run a 3.0 kernel.

Sent from my LG-P509

Technically you can run the kernel on any 4.x release, its just that the ROM will have to be re-written to support the 3.0 kernel. And I personally will not support CM9 or 10.0 for the 3.0 kernel. I will only support 10.1 with this kernel.

 

[Rashed97]

And yes, the P500/P509 version works perfectly. The P505/P506 version still black screens....

 

[Bytecode]

Yup,rashed is right - the graphic part,especially genlock,should be rewritten to support ION memalloc

 

[thachtunganh]

Re: [KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

Nice work, DJ!

Sent from my HTC Desire HD using xda app-developers app

 

[borchaniz]

Re: [KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

And yes, the P500/P509 version works perfectly. The P505/P506 version still black screens....

What do you mean by "perfectly?? Is the modem part fixed??
And Jenkins isn't working for me anymore

Sent from my LG-P500 using xda premium

 

[Rashed97]

[KERNEL][3.0.31][WIP]LG Optimus One Family (by androidarmv6)

What do you mean by "perfectly?? Is the modem part fixed??
And Jenkins isn't working for me anymore

Sent from my LG-P500 using xda premium

Perfectly as in it boots


Sent from my iPod touch using Tapatalk

 

[samsungi780philippines]

will this kernel works on GB custom ROMs?

 

[sweetnsour]

will this kernel works on GB custom ROMs?

No. You can try, but it will break things left and right.