This kernel gives the lowest standby drain for me on the stable PE11+ latest edition. The performance is also good.
(Panda kernel 12.2 with little UV)
(Panda kernel 12.2 with little UV)
[KERNEL][9.0/10.0/11][HMP/EAS] Panda Kernel v8.4
- Thread starter Pzqqt
- Start date
Can't turn on Bluetooth. It may be because QTI haptic driver, the logcat gets spammed with ton of QTI_xxx entries whenever i try to enabling bt
I'm on ArrowOS 12L latest build.
I can't say for sure if it's QTI or not, but ended selecting QPNP because if I select QTI it bootloops
V12.3 still not fix Bluetooth problem.
I have this problem, too!
I am using last awaken os 12L.
@Pzqqt could you fix 12.1(awaken os, arrow os) Bluetooth can not turn on problem, please?
Last edited:
Bluetooth works on my last awaken os. Thanks!Try this build & report to me.
Panda-v12.3.1-eas.zip
drive.google.com
@tobisto @bhenriquecs
Hi!
Try the latest version. but first take a backup for your boot.img in recovery, just in case.
I'm using it on PE11Plus, it is working fine.
Although I hv read the first post, am asking again....I'm on MIUI 11 . Can I flash this kernel and is it better than the stock kernel...I want to get max battery life...I'm getting an SOT of 2.5 hrs ....I have already replaced the battery with a genuine battery from the service center. But still I'm getting only 2.5 hrs of SOT. In fact, I went back to stock MIUI from custom ROMS only to get better SOT but no luck.
Hi, would it be possible to add the Charging Limiter function like the one present in the IceCold kernel? At the moment I have seen that using Battery charge limit, the charging is not interrupted but decreases to 0.5A once the set level is reached
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
19
Panda kernel is a kernel suitable for whyred devices.
Under the premise of maintaining stability, it's optimized as much as possible, and appropriately add some features.
Features
1. Built with Google Clang 12 + O3+ Polly optimize
2. Merge Linux kernel and CAF upstream kernel and driver as soon as possible
3. Fixed all compile-time warnings
Exclusive features
1. Include Aroma Installer. Visible & customizable installation. English & Chinese(simplified) interface.
OC/Non-OC, No UV/80mV UV, Old/New camblobs. Do whatever you want
2. Kernel-level battery capacity fix. Keep your battery capacity at 4000mAh
3. HMP build supports Spectrum, governor profile from Project WIPE v2 (by yc9559)
4. EAS build supports the selection of different energy model schemes (CAF, Kdrag0n, Hypeartist)
Other features
1. kcal, sound gain control, srgb, lz4, lz4hc, zstd
2. Boeffla wakelock blocker v1.1.0
3. Exfat driver comes from arter97
4. F2fs rapid GC
5. Fsync switch, you can sacrifice stability for better I/O performance by disable it
6. Available I/O scheduler: bfq, cfq(default), sio, fiops, maple, deadline
7. Available TCP congestion algorithm: westwood(default), cdg, reno, cubic, bbr
8. Merge some optimization commits from Sultan
9. Disable tracing/logging at various places (from AGNi kernel)
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Modify the GPU model to Adreno 512 (for PUBGM HD)
12.Ainur DTS hardware driver
13. USB fast charge driver, enjoy 900mA charging speed when connected to a computer
14. Latest Wireguard driver
15.Update & enable sr9700 driver, wired Internet access via OTG and wired network card
16. Enable CONFIG_HZ_300, faster system response
17. Adreno GPU boost
18. Some other visible and invisible optimizations...
Notes
1. Support both Oreo & Pie firmware.
2. Support both Pie & Q Roms.
3. Panda kernel does not provide MIUI support. It will boot on MIUI. But developer will not fix any bugs on MIUI.
Download & changelogs
https://github.com/Pzqqt/android_kernel_xiaomi_whyred/releases/latest
Source code
https://github.com/Pzqqt/android_kernel_xiaomi_whyred
Telegram discussion group
https://t.me/pandakerneldiscussion
Give you my kernel with love
Thanks to the logo created by WhyRedCloud™ channel
XDA:DevDB Information
Panda Kernel, Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
Pzqqt
Source Code: https://github.com/Pzqqt/android_kernel_xiaomi_whyred
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v8.4
Stable Release Date: 2020-04-24
Created 2020-04-25
Last Updated 2021-02-157Panda Kernel v6.0 changelog:
For all builds:
- Merge v4.4.228
- Some optimizations for I/O scheduler
For EAS build only:
- Add blu_schedutil governor
Download from Github releases:
https://github.com/Pzqqt/android_kernel_xiaomi_whyred/releases/tag/v6.07Panda Kernel v5.8 changelog:
For all builds:
- Merge v4.4.226
- Merge LA.UM.8.2.r1-06700-sdm660.0
- Some other patches (see github)
Download from Github releases:
https://github.com/Pzqqt/android_kernel_xiaomi_whyred/releases/tag/v5.86Panda Kernel v6.5 changelog:
For all builds:
- Merge v4.4.232
- touchscreen: Fixup AOSPA's dt2w
- Add LiveDisplay driver
- Latest WireGuard driver (v1.0.20200729)
Download from Github releases:
https://github.com/Pzqqt/android_kernel_xiaomi_whyred/releases/tag/v6.55Panda Kernel v6.1 changelog:
For all builds:
- Merge v4.4.229
- Merge LA.UM.8.2.r1-06900-sdm660.0
- Merge LA.UM.8.2.r2-02100-sdm660.0
- Sync the latest exfat driver(5.8-1arter97) from arter97, and port to v4.4
- random: squash update (optimizations for entropy, smoother)
- Latest WireGuard driver (v1.0.20200623)
- Some other patches
Download from Github releases:
https://github.com/Pzqqt/android_kernel_xiaomi_whyred/releases/tag/v6.1
