[Kernel | Android 10 | One UI 2.5 | FUF5/FUH1/FUJ2/FUK1/FVC2] BeastMode Kernel v2 for N960F | v2.17k2 | 20220522

Search This thread

jayjay1234

Senior Member
Jan 24, 2009
314
103
Hi, I installed Latest Update from February 2022 for Poland + Alexis Rom 3.2 + Magiska V23 and all it worked, later I installed Beast Kernel 2.17 FUJ2/FUK1, then after turning on Note 9, and if I write the correct PIN, I can't log in, Black screen and again asks me to enter the PIN. Is this kernel compatible with the latest February update and Alexis Rom
Alexis is FVB1 kernel an not compatible with FUJ2/FUK1. Build and kernel has to be the same. I also learned the hard way and had to factory reset. You can try to flash back stock boot image. Hopefully that will work for you but it didn't for me
 
Alexis is FVB1 kernel an not compatible with FUJ2/FUK1. Build and kernel has to be the same. I also learned the hard way and had to factory reset. You can try to flash back stock boot image. Hopefully that will work for you but it didn't for me
The easiest way to get out of that issue is remove pin through TWRP. But Samsung account access will be broken. I ran into this before, but I flashed a fixed version of the Kernel that allowed me to set a pin. But as of now? I live with the Samsung account issue. I am on FUH1. The FXXX code in the builds is really the most subtle thing that can mess your phone up if you don’t flash a compatible kernel. This is why I remained on older alexis release, that was still on FUH1.
 

ykkfive

Inactive Recognized Developer
Jul 25, 2010
3,175
2,990
ykkfive.blogspot.com
Hi, I installed Latest Update from February 2022 for Poland + Alexis Rom 3.2 + Magiska V23 and all it worked, later I installed Beast Kernel 2.17 FUJ2/FUK1, then after turning on Note 9, and if I write the correct PIN, I can't log in, Black screen and again asks me to enter the PIN. Is this kernel compatible with the latest February update and Alexis Rom 3.2 ?
Alexis is FVB1 kernel an not compatible with FUJ2/FUK1. Build and kernel has to be the same. I also learned the hard way and had to factory reset. You can try to flash back stock boot image. Hopefully that will work for you but it didn't for me

The easiest way to get out of that issue is remove pin through TWRP. But Samsung account access will be broken. I ran into this before, but I flashed a fixed version of the Kernel that allowed me to set a pin. But as of now? I live with the Samsung account issue. I am on FUH1. The FXXX code in the builds is really the most subtle thing that can mess your phone up if you don’t flash a compatible kernel. This is why I remained on older alexis release, that was still on FUH1.


currently this kernel DOES NOT support any one ui 2.5 rom after fuk1, including the one ui 3.x and 4.x port. i have sent samsung an email and waiting for them to update the kernel source

i can make it compatible to other one ui 2.5 rom (not 100% guarantee) but there is a risk which may lead to other unknown problems, including samsung account login and lock screen problem
 
Last edited:

ykkfive

Inactive Recognized Developer
Jul 25, 2010
3,175
2,990
ykkfive.blogspot.com
Thanks for the info, currently on dr ketam rom(q18) and using kernel v2.15a so far no problem other than app forced closing but not that often. For battery life still maybe the same as default custom rom kernel. Can i know where the non root version of this kernel? Maybe i missed some post

no reports for force close so far and i have tested on earily dr ketan q version without problem
 

avago621

Member
Mar 3, 2014
12
1
Samsung Galaxy Note 9
Redmi 9
NOTE: I am not responsible for bricked devices, loss of data, etc. Flash it with your OWN RISKS and ALWAYS DO A FULL BACKUP first



Changelog and Download (NO mirror please):

*** TWRP 3.3.1.0 is recommended


20220122 - v2.17i
- cpu oc big cores quad to 2002000
- cpu oc little cores to 2002000
- preset cpu uv for frequency < 2000kMhz
- preset gpu uv for frequency < 500kMhz
- added dynamic fsync: performs fsync only when screen is off for maintaining data integrity (make sure to enable both fsync and dynamic fsync options)
- raised some internal values:
-- little cores will go to 2002000 instead of staying at 1950000
-- big cores will go back to higer frequencies after throltted when temperature drops
- added frandom
- some more tweaks i cant remember
- IMPORTANT: please set the io scheduler to noop (by default) as to increase the ext4 performance


Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

FUF5
BM-Kernel-v2.17i-FUF5-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUH1
BM-Kernel-v2.17i-FUH1-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUJ2/FUK1
BM-Kernel-v2.17i-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)









20211130 - v2.15a
- patched with latest FUJ2 sources
- some more tweaks
- IMPORTANT: please set the io scheduler to noop (by default) as to increase the ext4 performance


Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

FUF5
BM-Kernel-v2.15a-FUF5-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root) - RE-UPLOADED

FUH1
BM-Kernel-v2.15a-FUH1-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root) - RE-UPLOADED

FUJ2
BM-Kernel-v2.15a-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root) - RE-UPLOADED









Previous releases:


20211121 - v2.14b2-FIXED
- FIXED no sound ocasionally after reboot (tested for more than 10 reboots)
- added PELT
- undervolt including memory/bus, etc
- gpu oc to 598 again
- many other performance and battery saving tweaks, as well as other that I could not remember
- swithed back to 250 HZ due to the no sound bug
- IMPORTANT: please set the io scheduler to noop as to increase the ext4 performance


Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

FUF5
BM-Kernel-v2.14b2-FIXED-FUF5-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUH1
BM-Kernel-v2.14b2-FIXED-FUH1-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUJ2
BM-Kernel-v2.14b2-FIXED-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)









20211120 - v2.14b2
- REMOVED due to an old minor bug was re-introdecued which occasionally produce no sound after a reboot
- pls download the v2.14b2-FIXED above







20211024 - v2.12
- for FUF5/FUH1 (NOTE: 2 different versions)
- updated to latest samsung FUH1 sources
- fixes for slow ext4 performance due to bugs introduced by ext4 and kernel updates
- IMPORTANT: please set the io scheduler to noop as to increase the ext4 performance


Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):
FUF5
BM-Kernel-v2.12-FUF5-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUH1
BM-Kernel-v2.12-FUH1-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)







20210920 - v2.11c6
- for FUF5/FUH1 (NOTE: 2 different versions)
- updated to latest ext4 and f2fs
- full f2fs support (cache and data partitions tested, system not yet tested) ** MAKE SURE you know how to go f2fs first
- linux upstream to 4.9.280
- some other tweaks and patches


Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):
FUF5
BM-Kernel-v2.11c6-FUF5-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)

FUH1
BM-Kernel-v2.11c6-FUH1-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)








20210818 - v2.10
- revised from the beginning with updates to FUF5
- cpu oc/uv
- gpu overclock/under voltage removed (awaiting fixes)
- some changes reverted
- Wake Gestures and Boeffla wakelocks included
- bring back the performance from initial release (up to 23% or more with multi cores, and nearly 3x memory performance when compared with v2.04) ** thanks for reporting this issue



Downloads (mediafire):
BM-Kernel-v2.10-magisk_patched.zip (patched with Magisk 23.0)
boot.img (no root)







Known Issues:

20210730:

(I) for version up to v2.05, the following features do not work as expected due to my mistakes

- Wake Gestures including double tap to wake (dt2w), swipe to wake (s2w), etc
- Boeffla wakelocks
- These problems will be fixed in the next version soon
.
FIXED. Please accept my sincere apology

(II) in v2.05 default gpu voltage may incorrectly show the modified values as default values in kernel manager

(III) since v2.04m the performance is not as good as v2.03 due to the introduction of some kernel changes





20210730 - v2.05a
- Wake Gestures and Boeffla wakelocks problems fixed
- no other changes, bugs fixing release of v2.05







20210729 - v2.05
- updated with Samsung FUF5 sources just released
- no other changes
- REMOVED, superseded by v2.05a







20210726 - v2.04m
- compatible with FUF5 (** may have problems if you use lockscreen or samsung account with possible fix here. ALWAYS do a full backup first)
- overclocked: cpu little to 2002000Mhz, gpu to 598000Mhz
- undervoltaged: cpu/memory
- gpu undervoltage support awaiting a fix
- linux upstreamed to 4.9.250
- cherry picked some kernel tweaks
- for undervolting the gpu, you may go and read my settings here awaiting a fix






More Previous releases:


20210628 - v2.03
- added "magisk detected" BASIC fix to prevent apps trying to detect if magisk is installed (only some of the detections are prevented)
- you can see the difference by installing an app from google play store called "Дія" issued by Ministry of Digital Transformation of Ukraine



- for more info, please read:
https://darvincitech.wordpress.com/2019/11/04/detecting-magisk-hide/
- for a comprehensive solution (NOT TO BE SUPPORTED/DISCUSSED HERE):
https://forum.xda-developers.com/t/magisk-detected-on-bankapp-solved.4258245/
IMHO, if there's nothing bothering you, you can ignore this comprehensive solution atm. but of coz it's up to you









20210621 - v2.02 (init release)
*** Special announcement for Dr.Ketan ROM Q16 - 20210623 ***
it seems there are some compatibility issues with Dr.Ketan ROM Q16 and this kernel, due to the fact that Q16 is based on N960FXXU8FUE1 while this kernel is N960FXXS8FUE5. As a result you may not be able to login to Samsung Account, or have cts profile/safetynet issue. So please MAKE A FULL BACKUP before proceed.


- updated with N960FXXS8FUE5 sources
- tested with stock rom UE5, Dr Ketan Q16 with some patches
- working properly with DevBase 7.4 and Alexis ROM 2.8 from users feedbacks
*** make sure you have flashed N960FXXS8FUE5 AP, BL, modem etc




.
the links aren't working
 

avago621

Member
Mar 3, 2014
12
1
Samsung Galaxy Note 9
Redmi 9
Hi, I installed Latest Update from February 2022 for Poland + Alexis Rom 3.2 + Magiska V23 and all it worked, later I installed Beast Kernel 2.17 FUJ2/FUK1, then after turning on Note 9, and if I write the correct PIN, I can't log in, Black screen and again asks me to enter the PIN. Is this kernel compatible with the latest February update and Alexis Rom 3.2 ?
Hey excuse me but i how did you manage to download it ? the bitly links arent working for me
 

ykkfive

Inactive Recognized Developer
Jul 25, 2010
3,175
2,990
ykkfive.blogspot.com
20020526
NOTICE: many of the links in the download section were blocked by bit.ly for unknown reasons. up to now the latest 2.17k2 links are not affected. i have reported to them already
 
Last edited:
  • Like
Reactions: Grainroot

kramer04

Senior Member
Jan 15, 2011
602
232
France
no.why do you need that in fstab?
There are new instructions to install Magisk
https://topjohnwu.github.io/Magisk/install.html#instructions

I tried to install TWRP recovery and then use your kernel
on their webpage https://twrp.me/samsung/samsunggalaxynote9.html
they said
This device uses dm-verity!



This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
 
  • Like
Reactions: Grainroot

Top Liked Posts

  • There are no posts matching your filters.
  • 15
    Hi all,

    It's ME again, being inactive for a few years due to my health conditions since Android Marshmallow! Today I would like to present you something I wanted for so long... an updated kernel for One UI 2.5! To be honest, I knew there were a lot of changes since MM, but not until these days I realized how troublesome they are, including rooting a device these days!! ( just rooted my N960F/DS running stock pie for more than a year ;) )
    OK, here we go!!


    This is an update to the BeastMode Kernel vR154 originally developed by @freeza and patched with latest Samsung One UI 2.5 kernel sources.

    Some of the features from R154 include:
    - enforcing kernel (switchable between enforcing/permissive)
    - cpu/gpu oc
    - dt2w (double tap to wake)
    - wireguard support


    However, due to my health conditions, I cannot spend too much time to update this kernel everyday although I am jobless, nor to have frequent updates as what @freeza did to his BeastMode Kernel. So please don't expect things will come very often. Thank you



    Special notes for BeastMode Kernel v2 initial release:
    - in the initial release (v2.02) there is no fix nor new feature added to the BeastMode Kernel vR154, as it servers as an update for new One UI 2.5 ROMs released by Samsung only
    - for existing features, problems or solutions, please visit the original BeastMode Kernel thread by @freeza
    - new features will be added in later releases



    BeastMode Kernel v2:
    - built with EVA GCC 12 and Proton Clang 13.0.0
    - for cts profile/safetynet fix, please install the Universal SafetyNet Fix by @kdrag0n



    Planned features:
    - more IO schedulers
    - more governors
    - OC/UV (partially done)
    - f2fs (DONE!)



    If you like this, please consider donating a loaf of bread or something to support my living or buy some treats for my old dog @ https://paypal.me/ykkfive ( I don't need coffee or beer :giggle: ). Thanks!



    Important Notes:
    if you are using a kernel manger, please go to here and see if you are affected



    Downloads:
    Changelog and downloads in post #2



    Credits:
    Big thanks to @freeza for allowing me to use his work and publish this update
    Samsung open source
    @evdenis
    @yarpiin
    @Da-BOSS
    @flar2
    @faux123
    xxmustafacooTR


    Source code:
    github
    8
    NOTE: I am not responsible for bricked devices, loss of data, etc. Flash it with your OWN RISKS and ALWAYS DO A FULL BACKUP first




    20020526
    NOTICE: many of the links below were blocked by bit.ly for unknown reasons. up to now the latest 2.17k2 links are not affected. i have reported to them already





    Changelog and Download (NO mirror please):

    *** TWRP 3.3.1.0 is recommended


    20220522 - v2.17k2
    - NOT compatible with alex 3.3 with may updates, screenlock and samsung account problems may occur
    - patched with latest N960FXXU9FVC2 source
    - fixed gpu table max freq and other related stuff
    - all gpu frequencies shown
    - big cores single 2886000, big cores triple/quad 2314000 (Tip: overclock may damage your phone, you have been warned)
    - IMPORTANT: please set the io scheduler to noop (by default) as to increase the ext4 performance


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

    FUF5
    BM-Kernel-v2.17k2-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUH1
    BM-Kernel-v2.17k2-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUJ2/FUK1
    BM-Kernel-v2.17k2-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FVC2
    BM-Kernel-v2.17k2-FVC2-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)










    20220122 - v2.17i
    - cpu oc big cores quad to 2002000
    - cpu oc little cores to 2002000
    - preset cpu uv for frequency < 2000kMhz
    - preset gpu uv for frequency < 500kMhz
    - added dynamic fsync: performs fsync only when screen is off for maintaining data integrity (make sure to enable both fsync and dynamic fsync options)
    - raised some internal values:
    -- little cores will go to 2002000 instead of staying at 1950000
    -- big cores will go back to higer frequencies after throltted when temperature drops
    - added frandom
    - some more tweaks i cant remember
    - IMPORTANT: please set the io scheduler to noop (by default) as to increase the ext4 performance


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

    FUF5
    BM-Kernel-v2.17i-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUH1
    BM-Kernel-v2.17i-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUJ2/FUK1
    BM-Kernel-v2.17i-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)









    20211130 - v2.15a
    - patched with latest FUJ2 sources
    - some more tweaks
    - IMPORTANT: please set the io scheduler to noop (by default) as to increase the ext4 performance


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

    FUF5
    BM-Kernel-v2.15a-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root) - RE-UPLOADED

    FUH1
    BM-Kernel-v2.15a-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root) - RE-UPLOADED

    FUJ2
    BM-Kernel-v2.15a-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root) - RE-UPLOADED









    Previous releases:


    20211121 - v2.14b2-FIXED
    - FIXED no sound ocasionally after reboot (tested for more than 10 reboots)
    - added PELT
    - undervolt including memory/bus, etc
    - gpu oc to 598 again
    - many other performance and battery saving tweaks, as well as other that I could not remember
    - swithed back to 250 HZ due to the no sound bug
    - IMPORTANT: please set the io scheduler to noop as to increase the ext4 performance


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):

    FUF5
    BM-Kernel-v2.14b2-FIXED-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUH1
    BM-Kernel-v2.14b2-FIXED-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUJ2
    BM-Kernel-v2.14b2-FIXED-FUJ2-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)









    20211120 - v2.14b2
    - REMOVED due to an old minor bug was re-introdecued which occasionally produce no sound after a reboot
    - pls download the v2.14b2-FIXED above







    20211024 - v2.12
    - for FUF5/FUH1 (NOTE: 2 different versions)
    - updated to latest samsung FUH1 sources
    - fixes for slow ext4 performance due to bugs introduced by ext4 and kernel updates
    - IMPORTANT: please set the io scheduler to noop as to increase the ext4 performance


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):
    FUF5
    BM-Kernel-v2.12-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUH1
    BM-Kernel-v2.12-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)







    20210920 - v2.11c6
    - for FUF5/FUH1 (NOTE: 2 different versions)
    - updated to latest ext4 and f2fs
    - full f2fs support (cache and data partitions tested, system not yet tested) ** MAKE SURE you know how to go f2fs first
    - linux upstream to 4.9.280
    - some other tweaks and patches


    Downloads (mediafire) *make sure you get the right version for your rom (you can check your rom version by tapping on the dialer, and type *#1234# and read the AP shown):
    FUF5
    BM-Kernel-v2.11c6-FUF5-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)

    FUH1
    BM-Kernel-v2.11c6-FUH1-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)








    20210818 - v2.10
    - revised from the beginning with updates to FUF5
    - cpu oc/uv
    - gpu overclock/under voltage removed (awaiting fixes)
    - some changes reverted
    - Wake Gestures and Boeffla wakelocks included
    - bring back the performance from initial release (up to 23% or more with multi cores, and nearly 3x memory performance when compared with v2.04) ** thanks for reporting this issue



    Downloads (mediafire):
    BM-Kernel-v2.10-magisk_patched.zip (patched with Magisk 23.0)
    boot.img (no root)







    Known Issues:

    20210730:

    (I) for version up to v2.05, the following features do not work as expected due to my mistakes

    - Wake Gestures including double tap to wake (dt2w), swipe to wake (s2w), etc
    - Boeffla wakelocks
    - These problems will be fixed in the next version soon
    .
    FIXED. Please accept my sincere apology

    (II) in v2.05 default gpu voltage may incorrectly show the modified values as default values in kernel manager

    (III) since v2.04m the performance is not as good as v2.03 due to the introduction of some kernel changes





    20210730 - v2.05a
    - Wake Gestures and Boeffla wakelocks problems fixed
    - no other changes, bugs fixing release of v2.05







    20210729 - v2.05
    - updated with Samsung FUF5 sources just released
    - no other changes
    - REMOVED, superseded by v2.05a







    20210726 - v2.04m
    - compatible with FUF5 (** may have problems if you use lockscreen or samsung account with possible fix here. ALWAYS do a full backup first)
    - overclocked: cpu little to 2002000Mhz, gpu to 598000Mhz
    - undervoltaged: cpu/memory
    - gpu undervoltage support awaiting a fix
    - linux upstreamed to 4.9.250
    - cherry picked some kernel tweaks
    - for undervolting the gpu, you may go and read my settings here awaiting a fix






    More Previous releases:


    20210628 - v2.03
    - added "magisk detected" BASIC fix to prevent apps trying to detect if magisk is installed (only some of the detections are prevented)
    - you can see the difference by installing an app from google play store called "Дія" issued by Ministry of Digital Transformation of Ukraine

    before applying fix
    after fix applied


    - for more info, please read:
    https://darvincitech.wordpress.com/2019/11/04/detecting-magisk-hide/
    - for a comprehensive solution (NOT TO BE SUPPORTED/DISCUSSED HERE):
    https://forum.xda-developers.com/t/magisk-detected-on-bankapp-solved.4258245/
    IMHO, if there's nothing bothering you, you can ignore this comprehensive solution atm. but of coz it's up to you









    20210621 - v2.02 (init release)
    *** Special announcement for Dr.Ketan ROM Q16 - 20210623 ***
    it seems there are some compatibility issues with Dr.Ketan ROM Q16 and this kernel, due to the fact that Q16 is based on N960FXXU8FUE1 while this kernel is N960FXXS8FUE5. As a result you may not be able to login to Samsung Account, or have cts profile/safetynet issue. So please MAKE A FULL BACKUP before proceed.


    - updated with N960FXXS8FUE5 sources
    - tested with stock rom UE5, Dr Ketan Q16 with some patches
    - working properly with DevBase 7.4 and Alexis ROM 2.8 from users feedbacks
    *** make sure you have flashed N960FXXS8FUE5 AP, BL, modem etc




    .
    5
    ok guys, sorry to keep you waiting so long

    due to the latest linux kernel upstreams being applied together with those uv introduced before, we faced some problems with the artifacts. they are not major problem tbh but who knows. it will be a disaster for me to redo the changes again and again if it becomes a serious problem

    i had to decide whether we keep the uv or continue with the upstream. and after many tests i decided to ditch those kernel patches, at least for now

    i will then continue what i wanted to do with this kernel

    btw, the release build is ready, but i want to wait for the latest fuj2 patches from samsung as i dont want to release another build shortly after this one. i will send them an email later

    anyway, we will have some improvements this time again! so stay tuned!

    thanks



    edit
    here's a teaser from my hard working tester @TechNoobForSale. thanks so much for your time and efforts
    3
    Now I migrated bm v2.02m + Alexis 2.8 combination. All seems decent for now. Still boeffla and double tap sections are missing. But it's okay.
    Here is the devchecks ram performance attachment. (on v2.02)

    I am going to perform antutu and geekbench and post here.
    u mean 2.04m?

    I am on v2.05

    Ram performance is decreased, confirmed with doing devcheck comparison and antutu bench.

    tap to wake and sleep options are gone.
    boeffla options are gone.

    Accordig to Devcheck,

    Cmemcopy: around 5000 Mb/s
    Cmemset: aroud 7500 Mb/s

    on R154 these were 10000 MB/s and 15000 Mb/s respectively.

    Cpu an GPU performance are good.

    I am on Alexis 2.9 Note 9 SM N960F


    And also the voltage table that given by dev is passed two full antutu bench. No crashes.
    i have did some tests today and yes, 2.02 is the fastest one, it was the original one without any "enhancements" in other aspects like cpu/gpu overclocking. it is not unusual that these enchancements can be beaten by the one without in terms of performance. it all depends on the usage, and more importantly everthing comes with a price. so you may find it at stock max speed outperforms an overclocked cpu due to the heat generated (which trigger the mechanism to lower the cpu freq as to cool it down). eg a 10 seconds task running with 2000Mhz may be better than 3 seconds with 2400mHz plus 7 seconds with 1700Mhz. you see what i mean? of coz, once again, it depends on the usage and the way of using it like benchmarking or daily use

    anyway, thanks for your feedbacks, as well as others. without you guys' feedback i couldnt discover the bugs myself

    also, i may consider to make an extreme version, which will be rebased on 2.02 with FUF5 but without any unneccessary changes for those who focus more on the speed due to different usage patterns if there are demands for it. but in general, 2.02 is still working fine with FUF5 except samsung account login issues for some users i believe

    on the other hand, i will continue to cherry pick some useful changes to optimize it in general for the main stream version

    thanks
    3
    EDIT 20210804
    a more aggressive gpu voltage settings is posted here awaiting a fix



    BM-Kernel-v2.04m released

    20210726 - v2.04m
    - compatible with FUF5 (** may have problems if you use lockscreen or samsung account with possible fix here. ALWAYS do a full backup first)
    - overclocked: cpu little to 2002000Mhz, gpu to 598000Mhz
    - undervoltaged: cpu/memory
    - support gpu under voltage
    - linux upstreamed to 4.9.250
    - cherry picked some kernel tweaks
    - for undervolting the gpu, you may refer to my initial safe settings below and adjust them by yourself. there are still rooms to undervolt, but it is suggested you do it bit by bit, and one by one and test the new voltage before next