• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL][ANYKERNEL][AOSP5.0][CM12] pink kernel 20141210

Search This thread

pinkflozd

Senior Member
Jan 23, 2011
249
881
Piran
www.varjanta.com
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, 
* or you getting fired because the alarm app failed. Please do some research 
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Features:
  • GPU Overclock (550mhz) / underclock (100mhz)
  • BUS, RAM overclock
  • Simple Adreno-TZ Governor
  • Linaro Cortex A7 GCC 4.9.3 Toolchain
  • Sound Control 3.2 thx to faux123
  • Color Calibration thx to savoca
  • sweep2wake & doubletap2wake thx to faux123
  • Pocket Detection for s2w and dt2w thx to alin23
  • IntelliThermal V2 (enabled by default)
  • Intelliplug 3.7 CPU Hotplug driver (mpdecision stoped and intelliplug default on boot)
  • FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
  • Intelliactive, Intellidemand, IntelliMM, CPU governors
  • ZSWAP 384mb (lz4 compression)
  • PowerSuspend 1.5 lots of new features to improve battery (enabled by default)
  • Dynamic FSYNC
  • Dynamic Writeback
  • Dynamic Cache Pressure
  • Dynamic Readahead
  • AIO Optimizations
  • UKSM Samepage Memory Merging
  • veno (default tcp congestion)
  • gcc optimization tweaks for our cpu
  • exFAT & NTFS Support
  • Use Android device as USB keyboard/mouse (USB Keyboard APK)
  • some more patches

Instructions:
  • Boot Recovery
  • Backup your current ROM (backup whole rom)
  • If you use a custom kernel its suggested to flash the current ROM again!
    You need the default kernel included in your ROM before flashing
  • flash the zip
  • reboot

Since the change in 20141210
The kernel supports only CM12 derivatives

Code:
[SIZE="5"][B][COLOR="Red"]ITS COMPATIBLE ONLY WITH CM12 BASED ROMS[/COLOR][/B][/SIZE]
[SIZE="4"][B][COLOR="Red"]IT IS NOT COMPATIBLE WITH THE STOCK MOTOROLA ROM[/COLOR][/B][/SIZE]
[SIZE="3"][COLOR="Red"]Use at your own risk!![/COLOR][/SIZE]

Thanks:
dhacker 29
faux123
razrqcom-dev-team
SeannyM
savoca

Source:
GitHub

XDA:DevDB Information
pink kernel, Kernel for the Moto G

Contributors
pinkflozd, dhacker29, faux123, SeannyM
Source Code: https://github.com/pinkflozd/android_kernel_motorola_falcon

Kernel Special Features:

Version Information
Status: Beta

Created 2014-02-03
Last Updated 2014-12-10
 
Last edited:

pinkflozd

Senior Member
Jan 23, 2011
249
881
Piran
www.varjanta.com
Faq:
Q: How can i make a BUG repport
A: You can use the new bug report interface.
adb shell /data/pink/create_bugreport.sh
adb shell /data/pink/create_bugreport_delayed.sh

The bug reports will be located on your sdcard

Q: How can i stop this kernel from surviving OTA's
A: Delete the file /system/addon.d/98pink

Q: Does CPU overclock work on this kernel?
A: NO

Q: How can i enable Sweep2Wake and DoubleTap2Wake?
A: Use an app like TricksterMod, Performance Control, Faux, etc...

Q: Why is my device so laggy?
A: Try setting a different governor like Intelliactive
Default settings are meant for powersave

Any more suggestions?
 
Last edited:

SWTR

Senior Member
Jan 2, 2012
635
197
Cham
How can I enable doubletap2wake?

And when I set the max frequenz to 1190mhz it doesn't save.
 
Last edited:

matyhew

Senior Member
Oct 6, 2012
260
201
Thanks, works amazing on official liquidsmooth :)
+1 with the GPU overclock

Matyhew

Sent from my Moto G using XDA Premium 4 mobile app
 

dancingtortoise

Senior Member
Oct 16, 2009
320
52
It's not that what i mean!! There's no proof that these oc methods improve in any kind of way... In fact the cm build with oc enabled caused more issues than profits... That's what i mean. They are even enabled by 2 different methods so there's no guarantee they both work the same

Hahaha. Oh, my bad. Then I guess its just a matter of preference. I always like to have the option.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 110
    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards, thermonuclear war, 
    * or you getting fired because the alarm app failed. Please do some research 
    * if you have any concerns about features included in this KERNEL
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    Features:
    • GPU Overclock (550mhz) / underclock (100mhz)
    • BUS, RAM overclock
    • Simple Adreno-TZ Governor
    • Linaro Cortex A7 GCC 4.9.3 Toolchain
    • Sound Control 3.2 thx to faux123
    • Color Calibration thx to savoca
    • sweep2wake & doubletap2wake thx to faux123
    • Pocket Detection for s2w and dt2w thx to alin23
    • IntelliThermal V2 (enabled by default)
    • Intelliplug 3.7 CPU Hotplug driver (mpdecision stoped and intelliplug default on boot)
    • FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
    • Intelliactive, Intellidemand, IntelliMM, CPU governors
    • ZSWAP 384mb (lz4 compression)
    • PowerSuspend 1.5 lots of new features to improve battery (enabled by default)
    • Dynamic FSYNC
    • Dynamic Writeback
    • Dynamic Cache Pressure
    • Dynamic Readahead
    • AIO Optimizations
    • UKSM Samepage Memory Merging
    • veno (default tcp congestion)
    • gcc optimization tweaks for our cpu
    • exFAT & NTFS Support
    • Use Android device as USB keyboard/mouse (USB Keyboard APK)
    • some more patches

    Instructions:
    • Boot Recovery
    • Backup your current ROM (backup whole rom)
    • If you use a custom kernel its suggested to flash the current ROM again!
      You need the default kernel included in your ROM before flashing
    • flash the zip
    • reboot

    Since the change in 20141210
    The kernel supports only CM12 derivatives

    Code:
    [SIZE="5"][B][COLOR="Red"]ITS COMPATIBLE ONLY WITH CM12 BASED ROMS[/COLOR][/B][/SIZE]
    [SIZE="4"][B][COLOR="Red"]IT IS NOT COMPATIBLE WITH THE STOCK MOTOROLA ROM[/COLOR][/B][/SIZE]
    [SIZE="3"][COLOR="Red"]Use at your own risk!![/COLOR][/SIZE]

    Thanks:
    dhacker 29
    faux123
    razrqcom-dev-team
    SeannyM
    savoca

    Source:
    GitHub

    XDA:DevDB Information
    pink kernel, Kernel for the Moto G

    Contributors
    pinkflozd, dhacker29, faux123, SeannyM
    Source Code: https://github.com/pinkflozd/android_kernel_motorola_falcon

    Kernel Special Features:

    Version Information
    Status: Beta

    Created 2014-02-03
    Last Updated 2014-12-10
    22
    Faq:
    Q: How can i make a BUG repport
    A: You can use the new bug report interface.
    adb shell /data/pink/create_bugreport.sh
    adb shell /data/pink/create_bugreport_delayed.sh

    The bug reports will be located on your sdcard

    Q: How can i stop this kernel from surviving OTA's
    A: Delete the file /system/addon.d/98pink

    Q: Does CPU overclock work on this kernel?
    A: NO

    Q: How can i enable Sweep2Wake and DoubleTap2Wake?
    A: Use an app like TricksterMod, Performance Control, Faux, etc...

    Q: Why is my device so laggy?
    A: Try setting a different governor like Intelliactive
    Default settings are meant for powersave

    Any more suggestions?
    22
    New Version

    Hey guys. after some time of innactivity i present you my new kernel for LOLLIPOP CM based roms
    i had lots of work with my paid freelance projects so i didnt have time for development

    ITS COMPATIBLE ONLY WITH CM12 BASED ROMS

    Some features:
    • GPU Overclock (533mhz)
    • GPU underclock (100mhz)
    • Simple Adreno-TZ Governor
    • Linaro Cortex A7 GCC 4.9.3 Toolchain
    • Sound Control 3.2 thx to faux123
    • Color Calibration thx to savoca
    • sweep2wake & doubletap2wake thx to faux123
    • Pocket Detection for s2w and dt2w thx to alin23
    • IntelliThermal V2 (enabled by default)
    • Intelliplug 3.7 CPU Hotplug driver (mpdecision stoped and intelliplug default on boot)
    • FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
    • Intelliactive, Intellidemand, IntelliMM, CPU governors
    • ZSWAP 384mb (lz4 compression)
    • PowerSuspend 1.5 lots of new features to improve battery (enabled by default)
    • Dynamic FSYNC
    • Dynamic Writeback
    • Dynamic Cache Pressure
    • Dynamic Readahead
    • AIO Optimizations
    • UKSM Samepage Memory Merging
    • veno (default tcp congestion)
    • gcc optimization tweaks for our cpu
    • exFAT & NTFS Support
    • Use Android device as USB keyboard/mouse (USB Keyboard APK)
    • some more patches
    20
    i'm currently rebasing the kernel all over to find a few locking issues. there is about 300 patches so it takes some time...
    i'm also a bit busy with my paid projects, thats why everything is so slow lately

    i'm also preparing ota updates...

    hopefully i'll have a new kernel this week
    18
    sorry guys for no release yesterday, i'm trying to get the RealTime kernel patches in, i'm half way done (all together more than 400 patches)
    hopefully i'll finish it today