[KERNEL][AOSP/TW][27 Dec] War Kernel r3 // colder than ever

[mjrifath]

Guys could anyone confirm me the latest raw kernel working with ressurectio remix 5.4.2 cm12.1

Thanks

 

[ramshif]

i m on stock 4.1.x i have rooted my phone now which cwm to flash ?( i m on stock recovery) and is there any relationship between my kernel and cwm? i mean shall i have to flash different types of cwm for different fone of note n7000 ?

Sent from my GT-N7000 using XDA Free mobile app

 

[drbobb]

I'm using the TouchWiz r5 together with Cheese ROM, and all is fine except for audio apps, that stutter a lot - both when streaming and when playing local content. My most used apps are Play Music, and Tunein Radio Pro, so this issue is quite annoying. Does anyone else observe this, any workaround?

 

[zacharias.maladroit]

Announcing Raw Kernel r10

Changes over r9 :
* Slightly tweaked charging current up from 450 to 550mA
* Compatible with CM12.1 preview. CM12 isn't supported anymore because the memory leaks make it too painful to use.

Download :
* raw_kernel_r10_omni.zip for Omni 4.4
* raw_kernel_r10_cm121.zip for CM12.1 preview (kudos to @bauner)
* raw_kernel_r10_cm11.zip for CM11

Keep in mind that Kernel Samepage Merging and zRAM are disabled in this kernel. These two features are trading CPU time for less memory pressure, but I'm hoping we won't need this anymore with the imminent release of Android 5.1.1 that should fix all the remaining leaks. Android 5.1 is already working quite decently! :good:

any chance to re-upload especially raw_kernel_r10_cm121.zip ?

the site doesn't really do anything (it's always showing that the site is slow and/or slow to respond)

Many thanks in advance :good:

Guys could anyone confirm me the latest raw kernel working with ressurectio remix 5.4.2 cm12.1

Thanks

+1

 

[ThaiDai]

any chance to re-upload especially raw_kernel_r10_cm121.zip ?

no problem downloading it, see attachment

 

[GeeckoDev]

any chance to re-upload especially raw_kernel_r10_cm121.zip ?

the site doesn't really do anything (it's always showing that the site is slow and/or slow to respond)

Might be caused by your ad blocker, try to disable it to access the website.

 

[zacharias.maladroit]

no problem downloading it, see attachment

thank you !

Might be caused by your ad blocker, try to disable it to access the website.

a mal-functioning adblocker great :silly:

I was sure that I had white-listed the page but it was still not working,

temporarily disabling it worked :good:

thank you

 

[stdog21]

Charging limit

Hello.First of all i whant to say thank you for you custom CM12.1 kernel.
Guys in this thread (http://forum.xda-developers.com/showthread.php?t=1706160&page=3)
says that "the SMB328 in our device appears to have a hidden undocumented (well, undocumented in anything we have access to) current limit of 700-750 mA".
Can you try to up the charging limit more to 600-700 mA?

 

[svbarbosa]

TWRP

@GeeckoDev, thanks for your amazing work.

Any chance of having TWRP in a future release CM12.1 Kernel? Please say yes...

 

[freedmm]

liquiqsmooth kernel

hi mr @GeeckoDev. im trying to compile liquidsmooth lp. it s booting. but two big issue. one of them wifi doesnt work, and second one when turnof the screen, phone restarts. any suggestion about this isssues please let me know.

 

[KalZakath]

Hi @GeeckoDev Is there possibility that you would try to complile 3.1x kernel for cm12.1 with for example DorimanX sources?

 

[GeeckoDev]

Hi @GeeckoDev Is there possibility that you would try to complile 3.1x kernel for cm12.1 with for example DorimanX sources?

Nope that would be mostly useless. I started working on backporting Galaxy Mega 2 drivers though. It's an Exynos 4415 phone with 3.4 kernel and new graphics stack

 

[KTTech]

Well the rating is 1 A, and my experience is it usually took under 3 hours to fully charge the battery under most other kernels, over 4 h is a significant difference.

In your case, you've got cable problems. I found that the cables in the market is a piece of sh *t. I tried over 20 pcs of USB->MicroUSB cables, and with most of them, the phone cannot charge the rated 1A in AC mode (some of them supplied only 250-300mA, with the same original charger). I bought 24/28AWG USB->MicroUSB cables from Ebay (they're not cheap, but not so expensive...) and the charging current is 960-980mAh in AC mode, so they are perfect (I ordered 2x2 pcs from 0.5m length to my car, and all of them working fine). The Kernel I used for testing was the RAW r10 Omni with DU 8.2.

 

[KalZakath]

Nope that would be mostly useless. I started working on backporting Galaxy Mega 2 drivers though. It's an Exynos 4415 phone with 3.4 kernel and new graphics stack

Any progress with it?

 

[drbobb]

In your case, you've got cable problems.

Well no I don't think so - I've used the same cable in other circumstances and had no issues with it, right now I use it with my new Zenphone 2 and a Quick Charge adapter, and it works according to expectations.

 

[KTTech]

Well no I don't think so - I've used the same cable in other circumstances and had no issues with it, right now I use it with my new Zenphone 2 and a Quick Charge adapter, and it works according to expectations.

You're new phone not uses the same charging circuit as the N7000 (as well, it uses different communication with the charger)... Change the cable to a proper one (as I described), and the charging time will be OK. (You can measure the current flows to the USB port with an special USB voltage/current meter equipment - or a simple digital multimeter with a modified cable -, to check the charging current).

 

[NickQuedateConmigo]

I'm still using the charger came with this phone. I can feel a little bit fast charge when with raw kernel compared before I used this kernel. If I want more faster, normally I will turn off my note and charging it.

 

[GeeckoDev]

I'm still using the charger came with this phone. I can feel a little bit fast charge when with raw kernel compared before I used this kernel. If I want more faster, normally I will turn off my note and charging it.

You should probably not use Raw Kernel but @bauner's stable kernel until I release the new one

 

[NickQuedateConmigo]

Hi GeekoDev.
Since when you not allowed to used this kernal? I'm using KitKat omni version. From my side, I'm not encounter same problem like them. If you said new version will update, I will wait. To change to bauner kernel, I guess I wait new update from you. As I told u, there no problem for me. Thank you for the information.

 

[nursoda]

I'm pretty sure GeekoDev's comment refers to Bauners LP ROM. Since you're on KK, you should be fine.