• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL] [April 21] Bulletproof

Status
Not open for further replies.
Search This thread

flar2

Recognized Developer
Jun 11, 2012
18,659
87,509
Southwestern Ontario
elementalx.org
[KERNEL] [April 21] Bulletproof

p1864072276.jpg


Bulletproof Kernel
for Google Play Edition and Sense-based ROMs



This version works on every HTC One variant except Sprint and Verizon

The Sprint HTC One version is here: http://forum.xda-developers.com/showthread.php?t=2280576




Bulletproof is an enhanced stock kernel for those who depend on their phone and need 100% stability.  It is highly optimized for smooth performance and extended battery life.  Enhancements include several sleep/wake options (S2W, DT2W, L2W), pocket detection to prevent accidental wakes, full compatibility with paid apps, button light notification, 60Hz refresh rate for HDMI, HTC logo as menu button, support for many gamepads and more.



Code:
* Standard disclaimer: 
* Your warranty is now void.  Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!


FEATURES:

  • Aroma installer
  • sweep2wake
  • doubletap2wake
  • logo2menu
  • logo2wake
  • pocket detection
  • optimized for battery life
  • button light notification
  • /system writable
  • NTFS r/w support
  • exFAT support
  • faux123 sound control support
  • CIFS support
  • USB forece fastcharge
  • /dev/frandom
  • voltage control
  • intellidemand governor
  • FIOPS and SIO i/o schedulers
  • fix MHL refresh rate
  • maintains compatibility with all paid apps
  • support more game controllers
  • optimized -O3 Linaro 4.7.3



Please hit the Thanks button if you download this

If you really like it, please consider a donation to encourage continued developement


Thanks to those who have donated!


DOWNLOAD

HTC Sense 5.5 & Sense 6 Android 4.4.2
Bulletproof-m7-14.2


Google Play Edition Android 4.4.2
Bulletproof-m7-11.0


HTC Sense 5.5 Android 4.4
Bulletproof-m7-10.3


Google Play Edition Android 4.4
Bulletproof-m7-9.1


HTC Sense 5.5 Android 4.3
Bulletproof-m7-8.1


HTC Sense 5 Android 4.3
Bulletproof-m7-6.2


Google Play Edition Android 4.3
Bulletproof-m7-5.3


HTC Sense 5 or Google Play Edition Android 4.2.2
Bulletproof-m7-4.4


HTC Sense 5 Android 4.1.2
Bulletproof-m7-2.1




For more options and tweaking, try my other kernel: ElementalX




INSTALLATION

1. Install zip from Recovery
2. Reboot!

For installation, it seems a lot of people have finicky phones when it comes to flashing stuff with aroma.

If the installer gets stuck at 0% then you need to reboot to bootloader and do fastboot erase cache

If the installer reboots at 10%, you need to do a nandroid backup of /system partition and restore it. I think a dirty flash would also work.

After you install it, if you get a black screen or stuck at the HTC logo, no need to worry. Just hold down the power button untill the capacitive buttons start flashing and the phone restarts. The kernel installed correctly.





Previous releases:
Bulletproof-m7-14.1
Bulletproof-m7-13.0
Bulletproof-m7-9.0.3-GPE
Bulletproof-m7-10.2
Bulletproof-m7-10.1
Bulletproof-m7-10.0
Bulletproof-m7-8.0
Bulletproof-m7-7.0.1
Bulletproof-m7-7.0
Bulletproof-m7-6.1
Bulletproof-m7-6.0
Bulletproof-m7-4.3
Bulletproof-m7-4.2
Bulletproof-m7-4.1
Bulletproof-m7-4.0
Bulletproof-m7-3.4
Bulletproof-m7-3.2
Bulletproof-m7-3.1
Bulletproof-m7-2.0
Bulletproof-m7-1.10
Bulletproof-m7-1.9
Bulletproof-m7-1.8
Bulletproof-m7-1.7.1
Bulletproof-m7-1.6
Bulletproof-m7-1.5
Bulletproof-m7-1.4
Bulletproof-m7-1.3
Bulletproof-m7-1.2
Bulletproof-m7-1.1
Bulletproof-m7-1.0
Bulletproof-m7-0.5
Bulletproof-m7-0.4
Bulletproof-m7-0.3.1
Bulletproof-m7-0.2
Bulletproof-m7-0.1


Credits and Thanks:

@tbalden:  logo2menu, bln, camera fix on sense 4.3
@mkasick: Fix for empty app-mounted directories
@deagleone:  awesome bulletproof logo



NOTES


Kernel Tuner/TricksterMod/Venom Tweaks, etc
You don't need these apps because the Bulletproof installer sets everything up automatically, but if you want to check or change settings, you can use these apps. Just be aware that some of them (e.g. Kernel Tuner) are set by default to apply settings on boot, which can interfere with the settings you chose in the Bulletproof installer.


init.d script template
The installer automatically adds an init.d script template so you can apply settings automatically at boot. It is not needed and does nothing by default, but you can use it to fine tune some settings if you like.

The script is named /etc/init.d/99bulletproof.  This is where you would set the button_timeout if you don't like the default settings.  There are other example settings in the file related to sweep2wake, doubletap2wake, logo2wake, pocket detection, logo2menu, button light notification, USB fastcharge, HTC color enhancement

To make settings apply automatically at boot, remove the # in front of the desired setting and change the setting, eg: removing the # in front of echo 0 > /sys/android_touch/button_timeout would disable that setting

If you edit the file, make sure it has execute permissions, or it won't apply. You can do this with ES File Explorer or other similar apps


Sweep2Wake
Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep). The options are: sweep2wake/sweep2sleep, sweep2sleep only, and disabled. If you use apps such as Kernel Tuner, the sweep2sleep only option can be selected by choosing "On with backlight".  

/sys/android_touch/sweep2wake

0=disabled
1=enable sweep2wake + sweep2sleep
2=enable sweep2sleep only




Sweep2wake button timeout
In earlier versions, sweeping to sleep brought you back to the homescreen. Starting in version 4.3, if you swipe fast enough, it will not register a home button press in the sweep, and your last app will be there when you unlock the phone again. Depending on how quick your fingers are, double tapping home could put the phone to sleep instead of opening recent apps. I've made the default button_timeout such that it is almost impossible for this to happen in normal use (button_timeout = 6). If you find that it happens too often, you can set button_timeout to a lower number, or disable it completely by setting it to 0.

/sys/android_touch/button_timeout

Accepted values are 0 to 15. 0 disables button timeout

• Higher values make it more likely that your last app will be open after you sweep to sleep, but there is a higher risk of accidentally putting the device to sleep when double tapping home.
• Lower values make it less likely that your last app will be open after you sweep to sleep, but reduces the chance of a double tap of home being mistaken for a sweep2sleep.
• Setting button_timeout to 0 disables this feature completely

The setting can be changed after installation in /etc/init.d/99bulletproof


DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping in the bottom inch or so of the screen, above the capacitive buttons.  

/sys/android_touch/doubletap2wake

0=disabled
1=enable doubletap2wake


Logo2Wake
Logo2Wake (L2W) allows you to sleep or wake the device by long pressing the HTC logo. You have to press just slightly above the HTC logo.  The screen will automatically turn on or off with a long press.

/sys/android_touch/logo2wake

0=disabled
1=enable logo2wake


Pocket Detection
Pocket detection protects against accidental wakes while S2W, DT2W or L2W are enabled and the phone is in your pocket.  Pocket detection uses the proximity sensor.  A few people have a problem with their proximity sensor that makes DT2W not work, so I've made an option to disable pocket detection.

/sys/android_touch/pocket_detect

0=disabled
1=enable pocket detection


Logo2Menu
Enabling Logot2Menu (L2M) allows you to use the HTC logo as a menu button.  You must press just slightly above the HTC logo.

/sys/android_touch/logo2menu

0=disabled
1=enable logo2menu


Button Light Notification
With Button Light Notification (BLN), the capacitive buttons will blink on and off when you have a new notification.  As soon as the screen comes on, BLN is canceled and the lights will no longer blink until you have another notification.  Please note that if you have your screen set to turn on when a message arrives, you will not see the buttons blinking because once the screen comes on, the button light notification is canceled.  

/sys/class/leds/button-backlight/blink_buttons

0 = disabled
1 = BLN enabled



CPU voltages
CPU voltages are fully customisable with apps such Kernel Tuner or Trickster Mod.  Be careful, lowering voltages can cause instability. Generally, having reboots while the phone is asleep is a sign that your minimum voltage is too low. The minimum voltage allowed is 700mV.

Be careful with undervolting. If you have bluetooth or sound issues, try increasing the minimum voltage.


Camera
On 4.2.2 ROMs, using HDR mode in low light with automatic flash may freeze the camera app.


NTFS support
This is for anyone who wants to use OTG to connect a USB stick or portable harddrive formatted with Microsoft's NTFS filesystem. You will need Stickmount or a similar app, HTC Sense does not automatically detect NTFS filesystem.


Paid Apps
All the cryptographic modules load properly, so you shouldn't have an issues with paid apps.


Other stuff
This kernel supports many game pads and controllers, including PS3 controllers and some X-Box controllers.  It has full OTG support.  A refresh rate of 60Hz for HDMI output allows you to play games on the big screen without choppiness.  CIFS support is built into the kernel.  Faux sound control is also supported.









CHANGELOG:

December 15, 2013 - Bulletproof-11.0
-update for Google Play Edition Android 4.4.2
-add multiboot support
-remove 3-dot menubar option


December 14, 2013 - Bulletproof-10.3
-restrict doubletap2wake to bottom half of screen
-update installer


December 14, 2013 - Bulletproof-9.1
-restrict doubletap2wake to bottom half of screen
-update installer
-battery saving tweaks


December 7, 2013 - Bulletproof-10.2
-remove doubletap2sleep
-battery saving tweaks


December 4, 2013 - Bulletproof-10.1
-fix bln setting
-add doubletap2sleep
-restrict doubletap2wake to bottom half of screen


December 1, 2013 - Bulletproof-10.0
-update for Sense 5.5 Android 4.4


December 1, 2013 - Bulletproof-9.0.3
-remove "remove 3-dot menubar" option


November 27, 2013 - Bulletproof-9.0.2
-fix module installation


November 27, 2013 - Bulletproof-9.0.1
-remove "restore 3-dot menubar" option


November 26, 2013 - Bulletproof-9.0
-update with HTC Google Play Edition source code


November 24, 2013 - Bulletproof-8.1
-fix pocket detection
-fiops is default scheduler


November 23, 2013 - Bulletproof-8.0
-update with HTC source code
-adjust touch wake functions
-restore stock camera app and libs


October 21, 2013 - Bulletproof-7.0.1
-update camera apk


October 14, 2013 - Bulletproof-7.0
-fix camera (thanks tbalden)
-update ramdisk for Sense 5.5


September 14, 2013 - Bulletproof-6.2
-free up more RAM
-camera fix for 3.17 base (thanks @tbalden)
-updated ramdisk to 3.17 version


September 9, 2013 - Bulletproof-6.1
-AIO: Don't plug the I/O queue in do_io_submit()
-fsync switch (on by default)
-update installer


September 8, 2013 - Bulletproof-6.0
-support sense android 4.3


September 3, 2013 - Bulletproof-4.4
-update with 4.2.2 Sense source
-update modules
-adjust Makefiles
-fix logo2wake bug
-add exfat support


August 12, 2013 - Bulletproof-5.3
-adjust build options
-fix logo2wake active after finger leaves logo area


August 10, 2013 - Bulletproof-5.2
-adjust build options


August 10, 2013 - Bulletproof-5.1
-remove log spam


August 9, 2013 - Bulletproof-5.0
-update to GE 4.3 source
-update installer


July 25, 2013 - Bulletproof-4.3
sweep2wake fixes
-doubletap2wake adjustments
-Makefile optimizations
-install-recovery.sh command added to ramdisk
-updated modules
-updated installer
-add init.d script template


July 22, 2013 - Bulletproof-4.2
-add option to enable fastcharge automatically
-fix sweep2wake bugs


July 21, 2013 - Bulletproof-4.1
-installer fixes
-new logo (thanks @deagleone)
-linaro 4.8.1 O3 build


July 20, 2013 - Bulletproof-4.0
-use Google Android toolchain 4.6
-update installer options
-fix sweep2wake bugs
-fix for home button options (if not using logo2menu)
-add ability to restore 3-dot menu
-fix capacitive buttons sometimes still active while screen off


July 11, 2013 - Bulletproof-3.4
-fix touchscreen registering input during calls
-add TCP congestion algorithm options
-fix fastcharge (@tbalden)
-vibration feedback for s2w
-add sysfs config for sleep/wake vibration strength
-change lower voltage limit to 700mV


June 30, 2013 - Bulletproof-3.2
-fix BLN setting not applied
-update BLN
-fix for app-mounted directories (thanks @mkasick)


June 29, 2013 - Bulletproof-3.1
-add support for Android 4.2.2
-update aroma installer


June 23, 2013 - Bulletproof-2.1
-adjust doubletap2wake
-tweak hsic


June 20, 2013 - Bulletproof-2.0
-update to latest HTC sources (still 4.1.2!)
-updated camera (works with .16 base ROMs)
-updated capacitive button sensitivity
-revert earpiece audio patch
-remove camera fix
-adjust doubletap2wake sensitivity
-pocket detection only active when screen off


May 22, 2013 - Bulletproof-1.10
-make camera fix optional
-wifi as module
-revert arm rwsem algorithm
-adjustments and fixes to sweep/wake options


May 14, 2013 - Bulletproof-1.9
-add option to disable pocket detection
-add new settings schema for sleep/wake functions
-fix bug dt2w not working when s2w disabled
-change l2w to automatically sleep/wake after pressed for a certain time


May 12, 2013 - Bulletproof-1.8
-suppress accidental wakes with s2w and dt2w
-fix dt2w setting not sticking
-add button light notification @tbalden)


May 10, 2013 - Bulletproof-1.7.1
-fix for camera on .16 based ROMs (thanks to he_stheone64)


May 5, 2013 - Bulletproof-1.7
-add DoubleTap2Wake
-update faux sound control support
-add option to disable menubar
-minor fixes


May 1, 2013 - Bulletproof-1.6
-add vibration to logo2wake (tbalden)
-fix hsic wakelock
-faux123 sound control (faux123)
-update to latest HTC sources
-optimized arm rwsem algorithm
-optimized AES and SHA1 routines
-disable usb whitelist
-fix fastcharge


April 28, 2013 - Bulletproof-1.5
-add logo2wake


April 26, 2013 - Bulletproof-1.4
-add logo2menu (thanks tbalden)
-adjust sweep2wake
-add aroma options


April 25, 2013 - Bulletproof-1.3
-voltage control
-camera fix included
-added /dev/frandom
-glibc memcpy


April 22, 2013 - Bulletproof-1.2
-new implementation of sweep2wake
-CIFS fix (thanks tbalden)


April 21, 2013 - Bulletproof-1.1
-Fixed  moc_crypto loading (kernel name is same as stock:  3.4.10-g42e6c45)


April 21, 2013 - Bulletproof-1.0
-fix earpiece sound in calls (many thanks to tbalden!)


April 16, 2013 - Bulletproof-0.5
-adjust sweep2wake
-force fastcharge (untested: use at your own risk)
-re-enable perflock


April 16, 2013 - Bulletproof-0.4
-adjust sweep2wake


April 16, 2013 - Bulletproof-0.3.1
-adjust boot.img


April 16, 2013 - Bulletproof-0.3
-add sweep2wake
-wifi driver built-in


April 15, 2013 - Bulletproof-0.2
-disable perflock
-arm cpu topology
-update cpu_power according to cpu load
-mhl change to [email protected]
-add CIFS support
-add FIOPS and SIO i/o schedulers
-update ramdisk


April 13, 2013 - Bulletproof-0.1
-compiled -O3 with Linaro 4.7.3
-aroma installer
-based on HTC source code 1.28
-intellidemand governor
-init.d support
-ntfs r/w support
-xz kernel compression
-disable system write protection
-adjust readahead to 2048
-fast rcu nohz



Source:
Bulletproof-m7 (Android 4.2.2)
Bulletproof-m7 (GPE Android 4.3)
Bulletproof-m7 (Sense 5.5 Android 4.3)
Bulletproof-m7 (GPE Android 4.4)

XDA:DevDB Information
Bulletproof | S2W | L2M | DT2W | BLN , a Kernel for the HTC One

Contributors
flar2
Kernel Special Features:

Version Information
Status: Stable
Current Stable Version: 14.2
Stable Release Date: 2014-04-21

Created 2013-07-30
Last Updated 2014-04-22
 
Last edited:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 399
    [KERNEL] [April 21] Bulletproof

    p1864072276.jpg


    Bulletproof Kernel
    for Google Play Edition and Sense-based ROMs



    This version works on every HTC One variant except Sprint and Verizon

    The Sprint HTC One version is here: http://forum.xda-developers.com/showthread.php?t=2280576




    Bulletproof is an enhanced stock kernel for those who depend on their phone and need 100% stability.  It is highly optimized for smooth performance and extended battery life.  Enhancements include several sleep/wake options (S2W, DT2W, L2W), pocket detection to prevent accidental wakes, full compatibility with paid apps, button light notification, 60Hz refresh rate for HDMI, HTC logo as menu button, support for many gamepads and more.



    Code:
    * Standard disclaimer: 
    * Your warranty is now void.  Use at your own risk.
    * In other words: It is your choice to use this software,
    * I am not responsible for any damage or problems!


    FEATURES:

    • Aroma installer
    • sweep2wake
    • doubletap2wake
    • logo2menu
    • logo2wake
    • pocket detection
    • optimized for battery life
    • button light notification
    • /system writable
    • NTFS r/w support
    • exFAT support
    • faux123 sound control support
    • CIFS support
    • USB forece fastcharge
    • /dev/frandom
    • voltage control
    • intellidemand governor
    • FIOPS and SIO i/o schedulers
    • fix MHL refresh rate
    • maintains compatibility with all paid apps
    • support more game controllers
    • optimized -O3 Linaro 4.7.3



    Please hit the Thanks button if you download this

    If you really like it, please consider a donation to encourage continued developement


    Thanks to those who have donated!


    DOWNLOAD

    HTC Sense 5.5 & Sense 6 Android 4.4.2
    Bulletproof-m7-14.2


    Google Play Edition Android 4.4.2
    Bulletproof-m7-11.0


    HTC Sense 5.5 Android 4.4
    Bulletproof-m7-10.3


    Google Play Edition Android 4.4
    Bulletproof-m7-9.1


    HTC Sense 5.5 Android 4.3
    Bulletproof-m7-8.1


    HTC Sense 5 Android 4.3
    Bulletproof-m7-6.2


    Google Play Edition Android 4.3
    Bulletproof-m7-5.3


    HTC Sense 5 or Google Play Edition Android 4.2.2
    Bulletproof-m7-4.4


    HTC Sense 5 Android 4.1.2
    Bulletproof-m7-2.1




    For more options and tweaking, try my other kernel: ElementalX




    INSTALLATION

    1. Install zip from Recovery
    2. Reboot!

    For installation, it seems a lot of people have finicky phones when it comes to flashing stuff with aroma.

    If the installer gets stuck at 0% then you need to reboot to bootloader and do fastboot erase cache

    If the installer reboots at 10%, you need to do a nandroid backup of /system partition and restore it. I think a dirty flash would also work.

    After you install it, if you get a black screen or stuck at the HTC logo, no need to worry. Just hold down the power button untill the capacitive buttons start flashing and the phone restarts. The kernel installed correctly.





    Previous releases:
    Bulletproof-m7-14.1
    Bulletproof-m7-13.0
    Bulletproof-m7-9.0.3-GPE
    Bulletproof-m7-10.2
    Bulletproof-m7-10.1
    Bulletproof-m7-10.0
    Bulletproof-m7-8.0
    Bulletproof-m7-7.0.1
    Bulletproof-m7-7.0
    Bulletproof-m7-6.1
    Bulletproof-m7-6.0
    Bulletproof-m7-4.3
    Bulletproof-m7-4.2
    Bulletproof-m7-4.1
    Bulletproof-m7-4.0
    Bulletproof-m7-3.4
    Bulletproof-m7-3.2
    Bulletproof-m7-3.1
    Bulletproof-m7-2.0
    Bulletproof-m7-1.10
    Bulletproof-m7-1.9
    Bulletproof-m7-1.8
    Bulletproof-m7-1.7.1
    Bulletproof-m7-1.6
    Bulletproof-m7-1.5
    Bulletproof-m7-1.4
    Bulletproof-m7-1.3
    Bulletproof-m7-1.2
    Bulletproof-m7-1.1
    Bulletproof-m7-1.0
    Bulletproof-m7-0.5
    Bulletproof-m7-0.4
    Bulletproof-m7-0.3.1
    Bulletproof-m7-0.2
    Bulletproof-m7-0.1


    Credits and Thanks:

    @tbalden:  logo2menu, bln, camera fix on sense 4.3
    @mkasick: Fix for empty app-mounted directories
    @deagleone:  awesome bulletproof logo



    NOTES


    Kernel Tuner/TricksterMod/Venom Tweaks, etc
    You don't need these apps because the Bulletproof installer sets everything up automatically, but if you want to check or change settings, you can use these apps. Just be aware that some of them (e.g. Kernel Tuner) are set by default to apply settings on boot, which can interfere with the settings you chose in the Bulletproof installer.


    init.d script template
    The installer automatically adds an init.d script template so you can apply settings automatically at boot. It is not needed and does nothing by default, but you can use it to fine tune some settings if you like.

    The script is named /etc/init.d/99bulletproof.  This is where you would set the button_timeout if you don't like the default settings.  There are other example settings in the file related to sweep2wake, doubletap2wake, logo2wake, pocket detection, logo2menu, button light notification, USB fastcharge, HTC color enhancement

    To make settings apply automatically at boot, remove the # in front of the desired setting and change the setting, eg: removing the # in front of echo 0 > /sys/android_touch/button_timeout would disable that setting

    If you edit the file, make sure it has execute permissions, or it won't apply. You can do this with ES File Explorer or other similar apps


    Sweep2Wake
    Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep). The options are: sweep2wake/sweep2sleep, sweep2sleep only, and disabled. If you use apps such as Kernel Tuner, the sweep2sleep only option can be selected by choosing "On with backlight".  

    /sys/android_touch/sweep2wake

    0=disabled
    1=enable sweep2wake + sweep2sleep
    2=enable sweep2sleep only




    Sweep2wake button timeout
    In earlier versions, sweeping to sleep brought you back to the homescreen. Starting in version 4.3, if you swipe fast enough, it will not register a home button press in the sweep, and your last app will be there when you unlock the phone again. Depending on how quick your fingers are, double tapping home could put the phone to sleep instead of opening recent apps. I've made the default button_timeout such that it is almost impossible for this to happen in normal use (button_timeout = 6). If you find that it happens too often, you can set button_timeout to a lower number, or disable it completely by setting it to 0.

    /sys/android_touch/button_timeout

    Accepted values are 0 to 15. 0 disables button timeout

    • Higher values make it more likely that your last app will be open after you sweep to sleep, but there is a higher risk of accidentally putting the device to sleep when double tapping home.
    • Lower values make it less likely that your last app will be open after you sweep to sleep, but reduces the chance of a double tap of home being mistaken for a sweep2sleep.
    • Setting button_timeout to 0 disables this feature completely

    The setting can be changed after installation in /etc/init.d/99bulletproof


    DoubleTap2Wake
    DoubleTap2Wake (DT2W) allows you to wake the device by double tapping in the bottom inch or so of the screen, above the capacitive buttons.  

    /sys/android_touch/doubletap2wake

    0=disabled
    1=enable doubletap2wake


    Logo2Wake
    Logo2Wake (L2W) allows you to sleep or wake the device by long pressing the HTC logo. You have to press just slightly above the HTC logo.  The screen will automatically turn on or off with a long press.

    /sys/android_touch/logo2wake

    0=disabled
    1=enable logo2wake


    Pocket Detection
    Pocket detection protects against accidental wakes while S2W, DT2W or L2W are enabled and the phone is in your pocket.  Pocket detection uses the proximity sensor.  A few people have a problem with their proximity sensor that makes DT2W not work, so I've made an option to disable pocket detection.

    /sys/android_touch/pocket_detect

    0=disabled
    1=enable pocket detection


    Logo2Menu
    Enabling Logot2Menu (L2M) allows you to use the HTC logo as a menu button.  You must press just slightly above the HTC logo.

    /sys/android_touch/logo2menu

    0=disabled
    1=enable logo2menu


    Button Light Notification
    With Button Light Notification (BLN), the capacitive buttons will blink on and off when you have a new notification.  As soon as the screen comes on, BLN is canceled and the lights will no longer blink until you have another notification.  Please note that if you have your screen set to turn on when a message arrives, you will not see the buttons blinking because once the screen comes on, the button light notification is canceled.  

    /sys/class/leds/button-backlight/blink_buttons

    0 = disabled
    1 = BLN enabled



    CPU voltages
    CPU voltages are fully customisable with apps such Kernel Tuner or Trickster Mod.  Be careful, lowering voltages can cause instability. Generally, having reboots while the phone is asleep is a sign that your minimum voltage is too low. The minimum voltage allowed is 700mV.

    Be careful with undervolting. If you have bluetooth or sound issues, try increasing the minimum voltage.


    Camera
    On 4.2.2 ROMs, using HDR mode in low light with automatic flash may freeze the camera app.


    NTFS support
    This is for anyone who wants to use OTG to connect a USB stick or portable harddrive formatted with Microsoft's NTFS filesystem. You will need Stickmount or a similar app, HTC Sense does not automatically detect NTFS filesystem.


    Paid Apps
    All the cryptographic modules load properly, so you shouldn't have an issues with paid apps.


    Other stuff
    This kernel supports many game pads and controllers, including PS3 controllers and some X-Box controllers.  It has full OTG support.  A refresh rate of 60Hz for HDMI output allows you to play games on the big screen without choppiness.  CIFS support is built into the kernel.  Faux sound control is also supported.









    CHANGELOG:

    December 15, 2013 - Bulletproof-11.0
    -update for Google Play Edition Android 4.4.2
    -add multiboot support
    -remove 3-dot menubar option


    December 14, 2013 - Bulletproof-10.3
    -restrict doubletap2wake to bottom half of screen
    -update installer


    December 14, 2013 - Bulletproof-9.1
    -restrict doubletap2wake to bottom half of screen
    -update installer
    -battery saving tweaks


    December 7, 2013 - Bulletproof-10.2
    -remove doubletap2sleep
    -battery saving tweaks


    December 4, 2013 - Bulletproof-10.1
    -fix bln setting
    -add doubletap2sleep
    -restrict doubletap2wake to bottom half of screen


    December 1, 2013 - Bulletproof-10.0
    -update for Sense 5.5 Android 4.4


    December 1, 2013 - Bulletproof-9.0.3
    -remove "remove 3-dot menubar" option


    November 27, 2013 - Bulletproof-9.0.2
    -fix module installation


    November 27, 2013 - Bulletproof-9.0.1
    -remove "restore 3-dot menubar" option


    November 26, 2013 - Bulletproof-9.0
    -update with HTC Google Play Edition source code


    November 24, 2013 - Bulletproof-8.1
    -fix pocket detection
    -fiops is default scheduler


    November 23, 2013 - Bulletproof-8.0
    -update with HTC source code
    -adjust touch wake functions
    -restore stock camera app and libs


    October 21, 2013 - Bulletproof-7.0.1
    -update camera apk


    October 14, 2013 - Bulletproof-7.0
    -fix camera (thanks tbalden)
    -update ramdisk for Sense 5.5


    September 14, 2013 - Bulletproof-6.2
    -free up more RAM
    -camera fix for 3.17 base (thanks @tbalden)
    -updated ramdisk to 3.17 version


    September 9, 2013 - Bulletproof-6.1
    -AIO: Don't plug the I/O queue in do_io_submit()
    -fsync switch (on by default)
    -update installer


    September 8, 2013 - Bulletproof-6.0
    -support sense android 4.3


    September 3, 2013 - Bulletproof-4.4
    -update with 4.2.2 Sense source
    -update modules
    -adjust Makefiles
    -fix logo2wake bug
    -add exfat support


    August 12, 2013 - Bulletproof-5.3
    -adjust build options
    -fix logo2wake active after finger leaves logo area


    August 10, 2013 - Bulletproof-5.2
    -adjust build options


    August 10, 2013 - Bulletproof-5.1
    -remove log spam


    August 9, 2013 - Bulletproof-5.0
    -update to GE 4.3 source
    -update installer


    July 25, 2013 - Bulletproof-4.3
    sweep2wake fixes
    -doubletap2wake adjustments
    -Makefile optimizations
    -install-recovery.sh command added to ramdisk
    -updated modules
    -updated installer
    -add init.d script template


    July 22, 2013 - Bulletproof-4.2
    -add option to enable fastcharge automatically
    -fix sweep2wake bugs


    July 21, 2013 - Bulletproof-4.1
    -installer fixes
    -new logo (thanks @deagleone)
    -linaro 4.8.1 O3 build


    July 20, 2013 - Bulletproof-4.0
    -use Google Android toolchain 4.6
    -update installer options
    -fix sweep2wake bugs
    -fix for home button options (if not using logo2menu)
    -add ability to restore 3-dot menu
    -fix capacitive buttons sometimes still active while screen off


    July 11, 2013 - Bulletproof-3.4
    -fix touchscreen registering input during calls
    -add TCP congestion algorithm options
    -fix fastcharge (@tbalden)
    -vibration feedback for s2w
    -add sysfs config for sleep/wake vibration strength
    -change lower voltage limit to 700mV


    June 30, 2013 - Bulletproof-3.2
    -fix BLN setting not applied
    -update BLN
    -fix for app-mounted directories (thanks @mkasick)


    June 29, 2013 - Bulletproof-3.1
    -add support for Android 4.2.2
    -update aroma installer


    June 23, 2013 - Bulletproof-2.1
    -adjust doubletap2wake
    -tweak hsic


    June 20, 2013 - Bulletproof-2.0
    -update to latest HTC sources (still 4.1.2!)
    -updated camera (works with .16 base ROMs)
    -updated capacitive button sensitivity
    -revert earpiece audio patch
    -remove camera fix
    -adjust doubletap2wake sensitivity
    -pocket detection only active when screen off


    May 22, 2013 - Bulletproof-1.10
    -make camera fix optional
    -wifi as module
    -revert arm rwsem algorithm
    -adjustments and fixes to sweep/wake options


    May 14, 2013 - Bulletproof-1.9
    -add option to disable pocket detection
    -add new settings schema for sleep/wake functions
    -fix bug dt2w not working when s2w disabled
    -change l2w to automatically sleep/wake after pressed for a certain time


    May 12, 2013 - Bulletproof-1.8
    -suppress accidental wakes with s2w and dt2w
    -fix dt2w setting not sticking
    -add button light notification @tbalden)


    May 10, 2013 - Bulletproof-1.7.1
    -fix for camera on .16 based ROMs (thanks to he_stheone64)


    May 5, 2013 - Bulletproof-1.7
    -add DoubleTap2Wake
    -update faux sound control support
    -add option to disable menubar
    -minor fixes


    May 1, 2013 - Bulletproof-1.6
    -add vibration to logo2wake (tbalden)
    -fix hsic wakelock
    -faux123 sound control (faux123)
    -update to latest HTC sources
    -optimized arm rwsem algorithm
    -optimized AES and SHA1 routines
    -disable usb whitelist
    -fix fastcharge


    April 28, 2013 - Bulletproof-1.5
    -add logo2wake


    April 26, 2013 - Bulletproof-1.4
    -add logo2menu (thanks tbalden)
    -adjust sweep2wake
    -add aroma options


    April 25, 2013 - Bulletproof-1.3
    -voltage control
    -camera fix included
    -added /dev/frandom
    -glibc memcpy


    April 22, 2013 - Bulletproof-1.2
    -new implementation of sweep2wake
    -CIFS fix (thanks tbalden)


    April 21, 2013 - Bulletproof-1.1
    -Fixed  moc_crypto loading (kernel name is same as stock:  3.4.10-g42e6c45)


    April 21, 2013 - Bulletproof-1.0
    -fix earpiece sound in calls (many thanks to tbalden!)


    April 16, 2013 - Bulletproof-0.5
    -adjust sweep2wake
    -force fastcharge (untested: use at your own risk)
    -re-enable perflock


    April 16, 2013 - Bulletproof-0.4
    -adjust sweep2wake


    April 16, 2013 - Bulletproof-0.3.1
    -adjust boot.img


    April 16, 2013 - Bulletproof-0.3
    -add sweep2wake
    -wifi driver built-in


    April 15, 2013 - Bulletproof-0.2
    -disable perflock
    -arm cpu topology
    -update cpu_power according to cpu load
    -mhl change to [email protected]
    -add CIFS support
    -add FIOPS and SIO i/o schedulers
    -update ramdisk


    April 13, 2013 - Bulletproof-0.1
    -compiled -O3 with Linaro 4.7.3
    -aroma installer
    -based on HTC source code 1.28
    -intellidemand governor
    -init.d support
    -ntfs r/w support
    -xz kernel compression
    -disable system write protection
    -adjust readahead to 2048
    -fast rcu nohz



    Source:
    Bulletproof-m7 (Android 4.2.2)
    Bulletproof-m7 (GPE Android 4.3)
    Bulletproof-m7 (Sense 5.5 Android 4.3)
    Bulletproof-m7 (GPE Android 4.4)

    XDA:DevDB Information
    Bulletproof | S2W | L2M | DT2W | BLN , a Kernel for the HTC One

    Contributors
    flar2
    Kernel Special Features:

    Version Information
    Status: Stable
    Current Stable Version: 14.2
    Stable Release Date: 2014-04-21

    Created 2013-07-30
    Last Updated 2014-04-22
    50
    sweep2wake demo




    logo2wake and logo2menu demo

    31
    Barring any unforeseen problems, this will be the new official release.

    Sweep2wake works differently now:
    • There should be fewer accidental wakes, no accidental screenshots, and it should wake from deep sleep easily.
    • The bigger change fixes an old bug where sweeping to sleep brought you back to the homescreen. Now, if you swipe fast enough, it will not register a home button press in the sweep, and your last app will be there when you unlock the phone again.
    • Depending on how quick your fingers are, double tapping home could put the phone to sleep instead of opening recent apps. I've made the default button_timeout such that it is almost impossible for this to happen in normal use (button_timeout = 6). If you find that it happens too often, you can set button_timeout to a lower number, or disable it completely by setting it to 0. The setting is at /sys/android_touch/button_timeout

    • For button_timeout:
    • Higher values make it more likely that your last app will be open after you sweep to sleep, but there is a higher risk of accidentally putting the device to sleep when double tapping home.
    • Lower values make it less likely that your last app will be open after you sweep to sleep, but reduces the chance of a double tap of home being mistaken for a sweep2sleep.
    • Setting button_timeout to 0 disables this feature completely


    init.d script template:
    • The installer automatically adds an init.d script template so you can apply settings automatically at boot
    • It is not needed and does nothing by default, but you can use it to fine tune some settings if you like
    • The script is named /etc/init.d/99bulletproof
    • This is where you would set the button_timeout if you don't like the default settings
    • There are other example settings in the file related to sweep2wake, doubletap2wake, logo2wake, pocket detection, logo2menu, button light notification, USB fastcharge, HTC color enhancement
    • To make settings apply, remove the # in front of the desired setting and change the setting, eg: removing the # in front of echo 0 > /sys/android_touch/button_timeout would disable that setting
    • If you edit the file, make sure it has execute permissions, or it won't apply. You can do this with ES File Explorer or other similar apps



    Some of the small changes:
    • I've updated the modules to the ones from the 2.24 base
    • The installer wipes cache at the beginning of install now
    • Nothing in the installer mounts /data now (should help with encrypted phones)
    • install-recovery.sh command added to ramdisk for ROMs and mods that use this
    • Makefile optimizations for extra smooth ui
    • Doubletap2wake is a bit more sensitive but I also restricted the active area slightly to prevent accidental wakes






    Download:

    Bulletproof-m7-4.3 RELEASE CANDIDATE


    Changes:
    sweep2wake fixes
    -doubletap2wake adjustments
    -Makefile optimizations
    -install-recovery.sh command added to ramdisk
    -updated modules
    -updated installer
    -add init.d script template
    31
    Updated with official Sense 5.5 source code!

    Let me know if everything is working


    One change you might notice: doubletap2wake now works on the whole screen.


    Download:

    Bulletproof-m7-8.0



    Changes:
    -update with HTC source code
    -adjust touch wake functions
    -restore stock camera app and libs