Development [KERNEL] [blu_spark r104 OP9/Pro] [A11 OOS/A12 Custom]

Search This thread

eng.stk

Senior Member
Mar 29, 2011
7,155
60,817
OnePlus 5T
OnePlus 6
Last edited:

xontax

Senior Member
Dec 17, 2011
253
52
Thanks, but still no success on nameless rom. Ending up in bootloop. r100 is the last one booting up without any problems
 

Attachments

  • ak3-log--2022-08-03--19-04.log
    5.1 KB · Views: 17

Stogie87

Senior Member
Oct 3, 2015
1,069
485
Berlin
Hi there. Somehow this kernel breaks vibration for third party apps on ricedroid and other custom roms in the forum. Would it be possible to fix this?
 

Mr.Conkel

Senior Member
Oct 10, 2020
241
73
London
Nexus 7 (2013)
OnePlus 5T
Hi there. Somehow this kernel breaks vibration for third party apps on ricedroid and other custom roms in the forum. Would it be possible to fix this?
Is vibration broken all together or just in certain applications? I don't think the Kernel can control that. Vibration would either be working or totally broken.
He's using LineageOS and the rom your using is based upon Crdroid (Crdroid is also based in Lineage) so you could look at the changes and what exactly is occurring to attempt to fix it. But more than likely its probably the individual application rather than the kernel. I use Crdroid here and it works great
 

mattie_49

Senior Member
Feb 4, 2010
3,390
1,063
Seymour Tn
OnePlus 9 Pro
Using r103 on Lineage 8/7 nightly. Installed perfectly with supplied kernel flasher a page or so back. Fkm ,I tried numerous times it aborts trying to resize a partition. Breaks build. Great work phone feels diff after fresh kernel.
 

Attachments

  • Screenshot_20220812-083601_Settings.png
    Screenshot_20220812-083601_Settings.png
    156.5 KB · Views: 60
  • Like
Reactions: eng.stk

Stogie87

Senior Member
Oct 3, 2015
1,069
485
Berlin
Really? Worked for me on a clean cdroid and op9. Flashed in recovery
That's interesting, because i get an error, if i try to flash it via EXKM.
I also did a 100% clean flash of crDroid. I flashed the Firmware for Europe.

Unpacking ramdisk always fails.

#update: Seems like you can flash blu_spark on crDroid only via recovery. If you try via EXKM oder FKM it fails and does not boot anymore. I had to reflash dtbo, vendor and boot image again via fastboot to make it work and then i flashed the kernel via recovery without issues.
 

Attachments

  • Screenshot_20220813-124716_EX Kernel Manager.png
    Screenshot_20220813-124716_EX Kernel Manager.png
    226.8 KB · Views: 64
Last edited:

xontax

Senior Member
Dec 17, 2011
253
52
That's interesting, because i get an error, if i try to flash it via EXKM.
I also did a 100% clean flash of crDroid. I flashed the Firmware for Europe.

Unpacking ramdisk always fails.

#update: Seems like you can flash blu_spark on crDroid only via recovery. If you try via EXKM oder FKM it fails and does not boot anymore. I had to reflash dtbo, vendor and boot image again via fastboot to make it work and then i flashed the kernel via recovery without issues.
Happy that everything works now
 

reffu

Senior Member
Feb 11, 2008
128
50
OnePlus 9
Manged to install on newest nameless for OP 9 (20220814) through recovery.
First time I tried via FKM, and it didn't give me any errors, but then hit Qualcomm Crash Dump Mode every time.

After re-flashing nameless, I tried flashing via nameless recovery and that worked fine without issue.
 

eng.stk

Senior Member
Mar 29, 2011
7,155
60,817
OnePlus 5T
OnePlus 6
Use Kernel Flasher by @capntrips other apps don't have full support for latest ak3 changes yet.

 
  • Like
Reactions: reffu
Jan 31, 2022
27
24
That's interesting, because i get an error, if i try to flash it via EXKM.
I also did a 100% clean flash of crDroid. I flashed the Firmware for Europe.

Unpacking ramdisk always fails.

#update: Seems like you can flash blu_spark on crDroid only via recovery. If you try via EXKM oder FKM it fails and does not boot anymore. I had to reflash dtbo, vendor and boot image again via fastboot to make it work and then i flashed the kernel via recovery without issues.
How do you flash in recovery exactly? on cr having the same issue
 

BKZAMAK

Member
Dec 8, 2020
18
0
Manged to install on newest nameless for OP 9 (20220814) through recovery.
First time I tried via FKM, and it didn't give me any errors, but then hit Qualcomm Crash Dump Mode every time.

After re-flashing nameless, I tried flashing via nameless recovery and that worked fine without issue.
blu-spark version?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    blu_spark_r104 release (A12 custom)

    New build is up (y)

    I tested with lineage-19.1-20220823-nightly-lemonadep-signed.zip, kernel build may work with other ROMs that use similar device/kernel trees.
    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.

    For flashing and easy of install logging, Kernel Flasher by @capntrips is recommended

    You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
    Download config: custom


    Changelog:
    • ThinLTO build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
    • makefile: disable some clang spam
    • AnyKernel3 updates (v20220827) for better flashing support after OTA/sideload
    • For root, Magisk 25.2 or newer is mandatory


    Keep in mind: I will give no active support for custom ROMs (just kidding ;p).
    I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.


    No mirrors please
    Don't forget to hit like, it's free :)
    10
    blu_spark_r106 release (A12 custom)

    New build is up (y)

    I tested with lineage-19.1-20220830-nightly-lemonadep-signed.zip, kernel build may work with other ROMs that use similar device/kernel trees.
    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.

    For flashing and easy of install logging, Kernel Flasher is recommended.

    You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
    Download config: custom


    Changelog:
    • Sync with lineage-19.1-20220830-nightly
    • oplus_chg: Report full charge capacity properly
    • For root, Magisk 25.2 or newer is mandatory


    Keep in mind: I will give no active support for custom ROMs (just kidding ;p).
    I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.


    No mirrors please
    Don't forget to hit like, it's free :)
    3
    blu_spark_r106 release (A12 custom)

    New build is up (y)

    I tested with lineage-19.1-20220830-nightly-lemonadep-signed.zip, kernel build may work with other ROMs that use similar device/kernel trees.
    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.

    For flashing and easy of install logging, Kernel Flasher is recommended.

    You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
    Download config: custom


    Changelog:



    Keep in mind:
    I will give no active support for custom ROMs (just kidding ;p).
    I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.


    No mirrors please
    Don't forget to hit like, it's free :)
    Confirmed for OP9 and newest CrDroid
    2
    Is this kernel compatible with latest C62 EU firmware?
    Somehow i always get an error message, if i try to flash that kernel via EXKM and then it destroys the boot process on crDroid 8.8.

    I had to use MSM Tool to restore my device.
    Just ADB sideload it in recovery.
    1
    аnyone on oos 11 with Blu spark?
  • 84
    DWHxIK

    Kernel features:
    • Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
    • full thinLTO -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
    • Less is more: stockish OP9 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability
    • Systemless installer (doesn't touch system/vendor partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
    • Removed some debug and logging options
    • ARM enhanced performance and battery patches
    • CVE security patches, general upstream and CAF fixes for important subsystems
    • Modded schedutil governor merged from latest CAF sm8350 patchset
    • No OC, use 250HZ base timer frequency
    • msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
    • Enhanced TCP methods (westwood is default, BBR available), Network tweaks and updated drivers
    • Several I/O control tweaks, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
    • ZRAM Swap (4GB LZ4 default) and with file disabled (2 GB storage gain), LZO-RLE and ZSTD are available
    • Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
    • KGSL fixes and general improvements for GPU driver
    • adrenoboost ready (disabled by default)
    • Backlight min brightness and brightness scaling (custom) option
    • Gamepad support enabled (xbox, ps4, switch)
    • USB2 Fast Charge (USB mode up to 900mA with MTP on)
    • FS fsync toggle on/off
    • Wakelock blockers available
    • wireguard support
    • Compatible with Kernel Flasher, EXKM, FKM , Kernel Adiutor and others


    DOWNLOAD KERNEL ZIP
    Kernel Flasher/FKM download configs: oos | custom
    (No mirrors please)​


    Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
    If you come from other kernel or have any issues, you should restore your stock boot.img/vendor_boot.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
    If you are upgrading between blu_spark versions, just flash the kernel zip.

    About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
    If you're using custom ROMs (including stock based ones) and OOS Open Betas you're much on your own. I'm mostly interested on debugging stuff in stock and stable OOS.
    Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.

    Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img/vendor_boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.


    Source Code: https://github.com/engstk/op9
    Don't forget to hit thanks, it's free ;)


    OnePlus 9 Pro development unit donated by OnePlus. Big shouts to them :)
    Very proud for being on the OnePlus Developer Program, special thanks to dev relations team.
    31
    blu_spark_r23 release

    First blu_spark build for the OP9 series is up (y)

    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also (need some fixes since code is broken). So backup you boot if you want to test and let me know :)
    Kernel already have some merged goodies and I think I have a good base to work with. For a couple days of work, it's not bad :)
    I'll take a look into more stuff to come, some things in OP are WIP. Stay tuned!

    You can use FKM download kernel feature, just import the links bellow in the app.
    FKM download configs: oos


    Changelog:
    • Build with Google Clang 12.0.5 + LLD linker
    • Synchronize codes for OnePlus 9/Pro Oxygen 11.2.6.6.LE25AA
    • Several build error fixes and quirks handled
    • Compilation improvements an cruf removed
    • Some goodies already merged like filesystem stuff, cpu governor & boost/msm perf, TCP algos, wakelock blocker, vibration and haptic feedback control, gpu adrenoboost, etc
    • All drivers builtin, wifi stack and datarmmnet merged from CAF
    • net/wireguard: merge v1.0.20210424


    Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
    I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).


    No mirrors please
    Don't forget to hit thanks, it's free :)
    21
    [Thread Cleaned]

    Good (or perhaps not so good?) day everyone! I've removed a few posts but left the ones that matter: civilized closure of conflict – social media can learn a thing or two from this. As we sit behind our desks and in our couches (or on a plane, even that's a thing nowadays), protected by that anonymity shield, we easily throw our words out into the world. And sometimes we regret them. Unfortunately, we find it so easy to judge one another for that. But facing the fact that we're all just humans that make mistakes, I believe we know that we shouldn't judge so quickly. Now more than ever; kindness should prevail.

    Thank you for your attention and have an energetic day or quiet night in your part of the world. If you need a chat, drop me a line. Just keep our development threads focused on development and mutual respect.

    Cheers!
    Timmy
    Forum Moderator
    17
    blu_spark_r52 release

    New build is up (y)

    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.

    You can use FKM download kernel feature, just import the links bellow in the app.
    FKM download configs: oos


    Changelog:
    • Synchronize codes for OnePlus 9 Oxygen 11.2.10.10
    • f2fs: shrink node_write lock coverage
    • AnyKernel3 updates (v20211215)
    • Couple init runtime adjusts to better UX
    • For root, Magisk 23.0 or higher is mandatory


    Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
    I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).


    No mirrors please
    Don't forget to hit thanks, it's free :)
    16
    blu_spark_r54 release

    New build is up (y)
    One last A11 hurrah before stuff start to line up for A12.

    This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.

    You can use FKM download kernel feature, just import the links bellow in the app.
    FKM download configs: oos


    Changelog:
    • Build with Google Clang 14.0.1 + LLD linker
    • wakelock blocker updates
    • Couple build reverts
    • AnyKernel3 updates (v20220126)
    • For root, Magisk 24.1 or newer is mandatory


    Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
    I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).


    No mirrors please
    Don't forget to hit like, it's free :)