osm0sis
Senior Recognized Developer / Contributor
Why the question mark? Read the post you quoted...
Development [KERNEL] [blu_spark r153 OP9/Pro] [A13 Custom]
- Thread starter eng.stk
- Start date
Can't be a bit more vague? And actually this kind of posting scares less skilled users into thinking there's something wrong with the kernel when it's not.
Nevertheless, all good with r134 running lineage-20.0-20230307-nightly in my op9 pro.
Other ROMS with different configs/base/random patches/whatever, unless you bring something to the table, you're on your own I'm afraid.
Last edited:
I can confirm, that at least on the latest Nameless for OP 9, sound doesn't work after flashing blu_spark (and phone calls shows speaker activated and unable to be turned off, even though no sound comes out). I'll chalk this up to the difference between Lineage and Nameless and go back to stock Nameless kernel. On the bright side, as far as I could tell everything else worked great.
Unsure if this has been reported already but with Crdroid v9.2 03/30/23 release and r134 of bluspark it completely breaks vibration. To anyone experiencing this as well is there anyway to resolve it? Perhaps just the build of the rom or more?blu_spark_r134 release (A13 custom)
New build is up
I tested with lineage-20.0-20230307-nightly, kernel build may work with other ROMs that use similar device/kernel trees (confirm before flashing).
This is only for ROMS with A13 fw kernel patchset.
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.
For flashing and easy of install logging, Kernel Flasher is recommended
You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
Download config: custom
Changelog:
Keep in mind: I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.
No mirrors please
Don't forget to hit like, it's free
Thanks for any help cheers!
Really like your work. Just wanted to ask If the latest blu_spark can be used with Stock OOS 13 on Oneplus 9 pro. Would really appreciate the help..
no and probably never will I don't see devs changing their minds about OOS support especially going forward
Awesome work, thanks! Great performance and best battery life I've had on this device. Running lineage latest and Snapdragon Scaling magisk module (ultra low power profile)
Thanks for finally adding oos13 fw support. Everything seems fine so far on latest Nameless (13), except Dolby Atmos crashing. Is there a workaround or is the error caused by the ROM?
Well I'm using WatchDogs which is based on Crdroid and Dolby atmos is working without any crashing so I doubt it is a kernel issue, it sounds to me like maybe the ROM is the problem
I'm sorry, I've never done any kernel stuff before and I just don't fully understand how to accomplish this. I tried just flashing the zip as an ak3 and I get a weird screen glitch most boots, and had to restore from a backup to fix it.
So I assume the config is important and that's the step I missed. I downloaded the file as a json but I'm not sure what to do with it in kernel flasher. there's no json option and it doesn't work to select a json file. I'm sorry to bother but I just don't see what I'm missing in kernel flasher to get this up and running.
Thank you for any info!!
Similar threads
- Sticky
Top Liked Posts
-
There are no posts matching your filters.
-
15blu_spark_r153 release (A13 custom)
New build is up
I tested with lineage-20.0-20230912-nightly, kernel build may work with other ROMs that use similar device/kernel trees (confirm before flashing).
This is only for ROMS with A13 fw kernel patchset.
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.
For flashing and easy of install logging, Kernel Flasher is recommended
You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
Download config: custom
Changelog:
Keep in mind: I will give no active support for custom ROMs besides LineageOS.
I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.
No mirrors please
Don't forget to hit like, it's free7
Earlier versions supported until OOS11, from then in only custom ROMs are supported, LOS or LOS based.
Every release post (and ocasional discussion) is prety much explicit.
So much time wasted with sidequests... neverthless I made more explicit on the OP what is or isn't.
Really hope on the next few times more than 1 person actually reads it lol But I already know that won't happen.1
Do you know why people are asking about OOS compatibility?
Because 1 post is misleading.
They read: "I only active support stock OOS ROM..."
They see:
"Kernel Flasher/FKM download configs: oos"
Because of that people are confused.
@eng.stk
First post needs to be updated.
Why there is no clear info about compatibility like it is in posts with new version update?
"Keep in mind: I will give no active support for custom ROMs besides LineageOS."
Heck there is no info what rom this kernel is intended for. -
105
Kernel features:
- Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
- full ThinLTO -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
- Less is more: stockish OP9 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability
- Systemless installer (doesn't touch system/vendor partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
- Removed some debug and logging options
- ARM enhanced performance and battery patches
- CVE security patches, general upstream and CAF fixes for important subsystems
- Modded schedutil governor merged from latest CAF sm8350 patchset
- No OC, use 250HZ base timer frequency
- msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
- Enhanced TCP methods (westwood is default, BBR available), Network tweaks and updated drivers
- Several I/O control tweaks, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
- ZRAM Swap (4GB LZ4 default) and with file disabled (2 GB storage gain), LZO-RLE and ZSTD are available
- Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
- KGSL fixes and general improvements for GPU driver
- adrenoboost ready (disabled by default)
- Backlight min brightness and brightness scaling (custom) option
- Gamepad support enabled (xbox, ps4, switch)
- USB2 Fast Charge (USB mode up to 900mA with MTP on)
- FS fsync toggle on/off
- Wakelock blockers available
- wireguard support
- Compatible with Kernel Flasher, EXKM, FKM , Kernel Adiutor and others
Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
If you come from other kernel or have any issues, you should restore your stock boot.img/vendor_boot.img/vendor_dlkm.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
If you are upgrading between blu_spark versions, just flash the kernel zip.
About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support ROMs with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
Currently only LineageOS or LOS based ROMs are supported, OOS is EOL.
Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img/vendor_boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
Source Code: https://github.com/engstk/op9
Don't forget to hit thanks, it's free
OnePlus 9 Pro development unit donated by OnePlus. Big shouts to them
Very proud for being on the OnePlus Developer Program, special thanks to dev relations team.35blu_spark_r23 release
First blu_spark build for the OP9 series is up
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also (need some fixes since code is broken). So backup you boot if you want to test and let me know
Kernel already have some merged goodies and I think I have a good base to work with. For a couple days of work, it's not bad
I'll take a look into more stuff to come, some things in OP are WIP. Stay tuned!
You can use FKM download kernel feature, just import the links bellow in the app.
FKM download configs: oos
Changelog:
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).
No mirrors please
Don't forget to hit thanks, it's free22[Thread Cleaned]
Good (or perhaps not so good?) day everyone! I've removed a few posts but left the ones that matter: civilized closure of conflict – social media can learn a thing or two from this. As we sit behind our desks and in our couches (or on a plane, even that's a thing nowadays), protected by that anonymity shield, we easily throw our words out into the world. And sometimes we regret them. Unfortunately, we find it so easy to judge one another for that. But facing the fact that we're all just humans that make mistakes, I believe we know that we shouldn't judge so quickly. Now more than ever; kindness should prevail.
Thank you for your attention and have an energetic day or quiet night in your part of the world. If you need a chat, drop me a line. Just keep our development threads focused on development and mutual respect.
Cheers!
Timmy
Forum Moderator18blu_spark_r120 release (A13 custom)
New build is up
I tested with lineage-20.0-20230103-nightly-lemonadep, kernel build may work with other ROMs that use similar device/kernel trees.
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.
For flashing and easy of install logging, Kernel Flasher is recommended
You can use Kernel Flasher/FKM download kernel feature, just import the link bellow in the app updates/flash section.
Download config: custom
Changelog:
Keep in mind: I am mostly interested on debugging stuff with logs and reproducible steps to replicate the issue.
No mirrors please
Don't forget to hit like, it's free17blu_spark_r52 release
New build is up
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also.
You can use FKM download kernel feature, just import the links bellow in the app.
FKM download configs: oos
Changelog:
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).
No mirrors please
Don't forget to hit thanks, it's free
