[KERNEL] [blu_spark r218 unified OP3/3T] [OOS 5.0.*]

Search This thread

laupuy

Senior Member
Jul 26, 2015
1,863
2,073
dans tes 22
Google Pixel 3
Why don't you add "discontinued" note for TWRP? It's a long time it hasn't been getting updates and suffers from decryption problems
What are you talking about ? it's a thread about the blu-spark kernel, not about twrp.
Thank you to inquire before writing this nonsense, and the developer has made it clear that he "shared" his twrp but there is no support or help over it.
And finally, his twrp can install his kernel on the official oos 5.0.6 rom, what else?


Sent from my OnePlus3 using XDA Labs
 

MarcAnt01

Senior Member
Jun 26, 2018
240
298
Where else could I ask for TWRP? Download links are attached to this thread. Me not complaining about kernel

---------- Post added at 11:05 AM ---------- Previous post was at 11:00 AM ----------

Mine was a suggestion, no need to complain btw
 

Paschfire

Senior Member
May 16, 2014
932
812
44
Ottawa
Why don't you add "discontinued" note for TWRP? It's a long time it hasn't been getting updates and suffers from decryption problems

Why don't you search the thread for notes regarding Blu_Spark TWRP Development? As it has been stated numerous times throughout this thread that Blu_Spark TWRP is no longer being maintained, updated, for the 3/3t past version 8.6.1.

Sent from my OnePlus 3T using XDA Labs
 

MarcAnt01

Senior Member
Jun 26, 2018
240
298
Why don't you search the thread for notes regarding Blu_Spark TWRP Development? As it has been stated numerous times throughout this thread that Blu_Spark TWRP is no longer being maintained, updated, for the 3/3t past version 8.6.1.

Sent from my OnePlus 3T using XDA Labs

Like contracts full of asterisks, 'cause it's too difficult to write it in the main page
 
Last edited:

navidsehat93

Member
Apr 15, 2013
18
2
As you know, OOS 4.x (and other N ROMS) has an annoying I/O bug, tracked back to sdcardfs.
If you use an app to delete stuff beside Android file picker or OP file manager you will probably be stuck with the file allocated space until you reboot.
Custom ROMs out there with sdcardfs enabled also have this bug (except PA so far).

I decided to do a Magisk module, so you can disable sdcardfs systemlessly (getting back to good old fuse) while we don't have a fix for this bug.
Just import the zip in Magisk module manager and reboot to profit :highfive:



No mirrors allowed
pp-acceptance-small.png

If you like my work, donations are always welcome (but not mandatory).
Don't forget to hit thanks and rate the thread nicely, it's free ;)

Hi dear. excuse me ,this module doesn't install anymore in magisk 16 or 17. I used your module in miui 9 (in redmi note 4x) and my memory problem solved. and now I updated my phone to miui 10 (Nougat 7.0) and still I have memory problem but this time I cant install your module anymore (with magisk not installed error!) Can you please update this module? ... :rolleyes:
 

mk_1996

Senior Member
Jun 26, 2016
880
564
Delhi
Hi dear. excuse me ,this module doesn't install anymore in magisk 16 or 17. I used your module in miui 9 (in redmi note 4x) and my memory problem solved. and now I updated my phone to miui 10 (Nougat 7.0) and still I have memory problem but this time I cant install your module anymore (with magisk not installed error!) Can you please update this module? ... :rolleyes:
This is a op3 thread. Read the thread title man you could've saved yourself some time
 

easytrash

New member
Feb 7, 2013
1
0
Please add an option to the kernel: CONFIG_IP_NF_TARGET_TTL

Отправлено с моего ONEPLUS A3000 через Tapatalk
 

eng.stk

Senior Member
Mar 29, 2011
7,081
60,412
OnePlus 5T
OnePlus 6
blu_spark r218 unified (oreo)

All right crew!

New Oreo build is up :highfive:
I don't have this device atm, so build is untested. Let me know how it goes :fingers-crossed:

Because of latest TWRP and Oreo changes, you'll need to use TWRP 3.2+ or my unified TWRP 3.2.1-x blu_spark v8.61 (recommended).
Any other versions will not have full support for the kernel and the installer.

Because of latest Oreo changes, builds will touch system partition.
So if you want to go back to stock just backup boot and system or dirty flash you ROM zip.
This is for Oreo OOS only. Nougat is EOL.


blu_spark_r218-oos-oreo_op3-op3t_5982c72.zip

  • build: use blu_gcc-8.3.0 (target optimized stable GCC 8.3.0 snapshot with latest toolchain tools and components)
  • Sync code to devicetree branch for OxygenOS 5.0.8
  • makefile: enable tree vectorization
  • makefile: supress some gcc-8 warnings
  • scripts/wireguard: Limit connection time to 30 seconds
  • script/wireguard: more reliable version selection
  • scripts/wireguard: only allow one execution at a time, with others failing open
  • wireguard driver updates (v0.0.20190227)
  • Other misc stuff


Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Custom build isn't compatible with EAS stuff.
Also don't go spam and bug reporting on ROM threads if using this.


No mirrors please

If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free ;)
 

emonkhan826

Senior Member
Nov 28, 2015
158
32
25
Dhaka
www.facebook.com
All right crew!

New Oreo build is up :highfive:
I don't have this device atm, so build is untested. Let me know how it goes :fingers-crossed:

Because of latest TWRP and Oreo changes, you'll need to use TWRP 3.2+ or my unified TWRP 3.2.1-x blu_spark v8.61 (recommended).
Any other versions will not have full support for the kernel and the installer.

Because of latest Oreo changes, builds will touch system partition.
So if you want to go back to stock just backup boot and system or dirty flash you ROM zip.
This is for Oreo OOS only. Nougat is EOL.


blu_spark_r218-oos-oreo_op3-op3t_5982c72.zip




Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Custom build isn't compatible with EAS stuff.
Also don't go spam and bug reporting on ROM threads if using this.


No mirrors please

If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free ;)
thank you ?
 
  • Like
Reactions: eng.stk

Top Liked Posts

  • There are no posts matching your filters.
  • 544
    DWHxIK

    Kernel features:
    • Build with custom toolchain blu_naro-7.3 (cortex-a57 targeted, build with latest Crosstool-NG from developer snapshot Linaro GCC 7.3-2018.04)
    • Full -O2 build with device and target flags enhanced, linaro build improvements, etc
    • Less is more: stockish OP3/OP3T unified builds based on OnePlusOSS/android_kernel_oneplus_msm8996
    • Systemless installer (doesn't touch system partition, OTA friendly - Nougat only)
    • Removed some debug and logging options
    • ARM enhanced performance and battery patches
    • CVE security patches, general upstream and CAF fixes
    • Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
    • No OC, set 300HZ base timer frequency
    • msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
    • Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
    • Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS & CIFS)
    • Removed verify and forced encryption, Set androidboot.verifiedbootstate=green
    • Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
    • Disabled hotplug on low battery levels
    • Optimized crypto routines
    • Swap and adaptive LMK off by default, 60 apps on background by default
    • Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel)
    • KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
    • sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
    • DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
    • Battery/Notification LED control
    • FS fsync toggle on/off
    • Wakelock blockers available
    • zx2c4's wireguard support
    • CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
    • init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
    • Compatible with Kernel Adiutor and others

    DOWNLOAD KERNEL ZIP and RECOVERY (No mirrors please)​


    Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
    Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
    If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
    Builds for OP3/3T are unified (so can be flashed in both devices).

    About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
    If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
    Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
    Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.

    Going back to stock: This kernel installer doesn't change your filesystem (systemless in case of Nougat). Oreo builds touch system partition.
    You can backup your boot & system (Oreo) with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.


    pp-acceptance-medium.png

    If you like my work, donations are always welcome.
    Don't forget to hit thanks and rate the thread nicely, it's free ;)


    XDA:DevDB Information
    blu_spark op3-op3t, Kernel for the OnePlus 3

    Contributors
    eng.stk
    Source Code: https://github.com/engstk/op3t

    Kernel Special Features: Powered by sparky

    Version Information
    Status: Stable
    Current Stable Version: r217 Oreo unified
    Stable Release Date: 2018-07-28
    Current Beta Version: r218 Oreo unified
    Beta Release Date: 2019-03-26

    Created 2016-06-24
    Last Updated 2019-11-29
    162
    [KERNEL] [blu_spark r201 unified OP3/3T] [OOS 4.5.* / Oreo OB / custom ROMs]

    Currently working with topjohnwu to bring Magisk support to Oreo [emoji4]
    Cross fingers...

    Sent from my blu_spark'd OnePlus 5 using Tapatalk
    155
    Touchscreen FW update Magisk module

    As you know, OnePlus improved the touch responsiveness in OB 13/4.
    New touch FW really drops the latency, it's a nice pair to blu_spark :)

    So I decided to do yet another Magisk module, so you can so you can test this enhancements in any ROM, systemlessly.
    Just import the zip in Magisk module manager and reboot to profit :highfive:
    ps: this is not a firmware/radio/bootloader zip update, but a fw binary file from the OB13/4 ROM for the TP controller driver.

    v1.1: improve custom ROM support


    No mirrors allowed
    pp-acceptance-small.png

    If you like my work, donations are always welcome (but not mandatory).
    Don't forget to hit thanks and rate the thread nicely, it's free ;)
    119
    blu_spark extras v8.61

    All right crew!

    Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-8.0 branch (including more recent upstream than official TWRP) and some specific device fixes.

    Fully synced with TWRP 3.2.1 goodies, name changing to reflect base 8.version, full compatible with OOS Oreo OB and Nougat (reported by testers).


    twrp-3.2.1-x_blu_spark_v8.61-op3_op3t.img

    • build: TWRP 3.2.1-x | blu_spark v8.61
    • TWRP Bugfix release
    • Default to device backup/restore vs. adb backup/restore
    • Fix stuck on 'black' screen entering recovery
    • Fix the inconsistencies in the spelling of SD card
    • Fix stuck on 'black' screen entering recovery
    • Fix white bar from 5T splash screen
    • Device specific changes here

    Keep it real, keep it true, keep it blu :highfive:


    Wakelock blocker info and example script
    Android wireguard-tools Magisk Module

    I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
    If your cat get's on fire you're on your own ;p


    No mirrors please
    pp-acceptance-small.png

    If you like my work, donations are always welcome.
    Don't forget to hit thanks and rate the thread nicely, it's free ;)
    114
    Firstly, blu_spark. Secondly, good evening.
    Oreo: done.

    download_20171017_020040.jpg

    Sent from my blu_spark'd OP5 using Tapatalk