I see no use of the word Wicked in that postAll right crew!
New build is up. Happy Easter!
Because of latest TWRP changes, you'll need to use latest TWRP 3.1.0-1 or flash my unified TWRP 3.1.0-x blu_spark v26 (recommended). Any other version will not have full support for the kernel and the installer.
Also take a look to blu_spark extras to get some nice and useful additions to the kernel.
Keep in mind: I will give no active support for custom ROMs (including OOS based ones) or OB.
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
If you like my work, donations are always welcome (but not mandatory).
Don't forget to hit thanks and rate the thread nicely, it's free
[KERNEL] [blu_spark r218 unified OP3/3T] [OOS 5.0.*]
- Thread starter eng.stk
- Start date
No time for wickedness on Easter :angel:
You can use apps to block wakelocks or create a script to do it a boot
you can find within ElementalX-Kernel Manager /Miscellaneous /Block Wakelocks
Does anyone have any experience with intellithermal (seen in kernel adiutor) if so, do you need to untick "core control" to use it? What the hell does it do? Seems interesting...
I flashed this in freedom os based on oos 3.2.8 on stock Kernel
It gave me a bootloop
Any ideas?
Cheers ?
Sent from my OnePlus3 using XDA Labs
Thanks both! Using Franco's app for now.you can find within ElementalX-Kernel Manager /Miscellaneous /Block Wakelocks
That's only for ROMs without thermal daemon, has no use if userspace stuff active.
Using deprecated stuff in unsupported setup. Hum...
You can :angel:
Nope. Apart from you flashing it over an unsupported ROM nothing comes by.
It works on stable OOS 3.2.8 as mentioned.
Blu_active is the default governor and is tweaked for perfection. Fast and smooth.What governor should i use on beta 13? Little laggy on stock settings
Rather strange. Can't see why you would get lag.
Maybe something you are using apart from the ROM and kernel. Stock settings are smooth as butter.
I could tell you to enable fastlane, but if it was me I would find the culprit for the lag you mention first. Just to be on the safe side.
OB brings all the beta stuff you wish for, kernel works fine on it but no support should be expected.
Man, start clean, and flash with the correct sequence.
ROM, root (if you need it), kernel.
No way to have lag if you stop there.
Apart from that, can't really know what you have on your setup.
Every kernel that mentioned only for Oos worked on freedom os because it is the same oos rom and i know you know more about it than me that's the reason i flashed it and when i got stuck in bootloop i asked here
And for the deprecated i am still on MM and only kernel i would like to run is bluspark... Running it since nexus 5 days
Cheers ?
Sent from my OnePlus3 using XDA Labs
Today I had a bootloop flashing a ROM update. Custom ROM FYI.Every kernel that mentioned only for Oos worked on freedom os because it is the same oos rom and i know you know more about it than me that's the reason i flashed it and when i got stuck in bootloop i asked here
And for the deprecated i am still on MM and only kernel i would like to run is bluspark... Running it since nexus 5 days
Cheers ?
I flashed ROM, root and kernel.
The procedure is quite straight forward, I do it all the time. Nevertheless something derped and I got stuck on a bootloop.
The ROM download is good, MD5 matched.
The root solution has always been solid.
The kernel was working before so no problem with the download there either.
Who do I blame? No one. I troubleshoot it myself and eventually get everything working as expected.
I always have a Nandroid so all is smooth and going.
1st Rule of thumbs: Troubleshoot the problem yourself if possible.
2nd Rule of thumbs: if it ain't supported, it ain't supported.
3rd Rule of thumbs: If you feel it should work, start clean. God only knows what you have on your setup.
r28 was the last OOS 3.2.8 release, and on OOS it works as expected.
:good:
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
544
Kernel features:
- Build with custom toolchain blu_naro-7.3 (cortex-a57 targeted, build with latest Crosstool-NG from developer snapshot Linaro GCC 7.3-2018.04)
- Full -O2 build with device and target flags enhanced, linaro build improvements, etc
- Less is more: stockish OP3/OP3T unified builds based on OnePlusOSS/android_kernel_oneplus_msm8996
- Systemless installer (doesn't touch system partition, OTA friendly - Nougat only)
- Removed some debug and logging options
- ARM enhanced performance and battery patches
- CVE security patches, general upstream and CAF fixes
- Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
- No OC, set 300HZ base timer frequency
- msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
- Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
- Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS & CIFS)
- Removed verify and forced encryption, Set androidboot.verifiedbootstate=green
- Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
- Disabled hotplug on low battery levels
- Optimized crypto routines
- Swap and adaptive LMK off by default, 60 apps on background by default
- Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel)
- KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
- sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
- DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
- Battery/Notification LED control
- FS fsync toggle on/off
- Wakelock blockers available
- zx2c4's wireguard support
- CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
- init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
- Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP and RECOVERY (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Builds for OP3/3T are unified (so can be flashed in both devices).
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless in case of Nougat). Oreo builds touch system partition.
You can backup your boot & system (Oreo) with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
XDA:DevDB Information
blu_spark op3-op3t, Kernel for the OnePlus 3
Contributors
eng.stk
Source Code: https://github.com/engstk/op3t
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r217 Oreo unified
Stable Release Date: 2018-07-28
Current Beta Version: r218 Oreo unified
Beta Release Date: 2019-03-26
Created 2016-06-24
Last Updated 2019-11-29155Touchscreen FW update Magisk module
As you know, OnePlus improved the touch responsiveness in OB 13/4.
New touch FW really drops the latency, it's a nice pair to blu_spark
So I decided to do yet another Magisk module, so you can so you can test this enhancements in any ROM, systemlessly.
Just import the zip in Magisk module manager and reboot to profit :highfive:
ps: this is not a firmware/radio/bootloader zip update, but a fw binary file from the OB13/4 ROM for the TP controller driver.
No mirrors allowed
If you like my work, donations are always welcome (but not mandatory).
Don't forget to hit thanks and rate the thread nicely, it's free119blu_spark extras v8.61
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-8.0 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.2.1 goodies, name changing to reflect base 8.version, full compatible with OOS Oreo OB and Nougat (reported by testers).
twrp-3.2.1-x_blu_spark_v8.61-op3_op3t.img
Keep it real, keep it true, keep it blu :highfive:
Wakelock blocker info and example script
Android wireguard-tools Magisk Module
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
