I'm a year away from my contract being up. actually 7 months.
Sent from my PG86100 using Tapatalk 2
Sent from my PG86100 using Tapatalk 2
[Kernel] ButteredToasT ICS RLS18 | Linux 3.0.101 | linaro 4.7 -O3 | otg | HTC beats
- Thread starter bigwillyg
- Start date
-
- Tags
- development ics kernel shooter
What do you mean.it was wish full thinking
Sent from my SPH-L720 using Tapatalk 2
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
That sucks do u know if chad will
Sent from my SPH-L720 using Tapatalk 2
Does the Harmonia Rom capable?
Sent from my HTCEVOV4G using xda app-developers app
Sent from my HTCEVOV4G using xda app-developers app
There is already an S4 kernel by chad out. Its just not in flashable form yet, cause apparently recoveries are not yet stable, or something like that.
I tried this kernel with 4ext installation and when I reboot the screen was white. Do not know if anyone else had issues. I have a cm10-1 ROM.
I flashed this kernel with 4ext and it went fine. I'm using MeanROM, though.
Which hboot are you on it has to be less than 1.58 on Sprint and 1.57 on VM
Sent from my PG86100 using xda premium
---------- Post added at 04:53 PM ---------- Previous post was at 04:51 PM ----------
Which forum has chad moved to because I've been looking for where his kernels are if he is at a forum?
Sent from my PG86100 using xda premium
He is still there but there is a separate section for verified users who keep active.
Sent from my PG86100 using Tapatalk 2
RLS 17.5 Linux 3.0.77
new build up in OP. its a hold overbuild with updated linux until I get enough time to do something better.
new build up in OP. its a hold overbuild with updated linux until I get enough time to do something better.
A correct OP in fact.
Sent from my EVO using Tapatalk 2
Sent from my EVO using Tapatalk 2
MIUI V5
been running Your Kernel on DH new v5 rom and its been great. thank you for all your hard work you put into this Kernel it has everything ive ever wanted and more!
Paul:victory:
been running Your Kernel on DH new v5 rom and its been great. thank you for all your hard work you put into this Kernel it has everything ive ever wanted and more!
Paul:victory:
Ok, so I found some free time this morning and decided I would run the source for the kernel through the Linaro 4.8 toolchain and so far it has been simple to correct the compile errors in this new version. I think I may just use Linaro 4.8 when I update the kernel again.
Sent from my PG86100 using Tapatalk 2
Sent from my PG86100 using Tapatalk 2
Any chance of grabbing the wifi connect fix from MiRaGe kernel? My wifi doesn't always connect or it takes a long time.
I know we always ask but any chance of a 4.2 build update. I was never able to get the last one to run.
Sent from my Evo V 4G using Tapatalk 2
Sent from my Evo V 4G using Tapatalk 2
Lol! Yes. As soon as I get a chance to update based on some suggestions from mrg666.
Sent from my PG86100 using Tapatalk 2
No?
Edit: Sorry my comment was inappropriate.
Sent from my Evo V 4G using Tapatalk 2
Edit: Sorry my comment was inappropriate.
Sent from my Evo V 4G using Tapatalk 2
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
131ButteredToast (Buttery smooth and extremely wicked)
CDMA/GSM Ice Cream Sandwich, sense 3.6, 4.x, AOSP
Be Gentle folks: This is my first kernel rodeo after many months of studying how the great ones do it.I hope you like it, if you dont then theres the door (figuratively).
Toolchain/Compiler: linaro 4.7.3
REPO -> https://bitbucket.org/bigwillyg/buttered_toast_shooter
KERNEL SENSE -> ButteredToast Final Version
Sweet kernel -O3 optimized for linaro 4.7.3 compiler (dont ask how, my head still hurts)
Changelog: Changelog is in post #2
Credits: Starting with CG/KeRnElChEf because he is my mentor/tutor/handholder and aside from the enormous obvious contribution, his constant assistance and teaching through out this experience. With out his help I never would have attempted this.
- Johhnyslt
- Faux123 (this equation: (4*HZ+61), the dynamic enhancement of f/sync)
- showp1894 (cmdline options, original cypress version sweep2wake - used as base by CG to write it for AMTEL)
- kernel.org
- CAF
- F2FS article from https://lwn.net/Articles/518718/
- MikeC84
- Ziggy471 (lagfree / smartass)
- Dodava
- Linaro
- creator of BFQ - i have no idea
- creator of SIO - i have no idea
- creator of VR - i have no idea
- developer of LZO
- yank555-lu (first with fast charge, adjust LED timeout via sysfs)
- chad0989 (improved on fast charge)
- Cjoliver
- Anryl
- Agrabren (CM10 cam fix)
If it works well for you GREAT!!! If not Please let me know, logcats for errors are preferred.
Mods: since this is my first thread of this kind, please let me know if I am missing any required info from this post.41CHANGELOG
Code:- RLS18-FINAL: PATCH: Patch to LInux 3.0.101 FS: added ExFat support for SDCARD - RLS17.9: PATCH: Patch to Linux 3.0.96 - RLS17.7: PATCH: Patch to Linux 3.0.84 CPU: updated interactive governor from CAF msm-3.4, thanks mrg666 for the tip. SCHED: updated ROW scheduler from CAF msm-3.4, thanks mrg666 for the tip. - RLS17.6: PATCH: Patch to Linux 3.0.80 CPU: updated interactive gov (thanks mrg666 for the tip) WIFI: updated wifi components to improve stability (thanks mrg666 for the tip) - RLS17.5: PATCH: Patch to Linux 3.0.77 SCHED: tried to tweak ROW per johhnyslt's repo to try and get it to work better. - RLS17.4: PATCH: Patch to Linux 3.0.74 PATCH: Patch to HTC 2.95 Source - RLS17.3: PATCH: Patch to linux 3.0.72 SCHED: added ROW IO Scheduler MPDEC: sysfs support for max screen off cpu clock added (Chad Goodman all the way, love this guy) FIX: file ext4 compile errors (Chad Goodman ) - RLS17.2: SCHED: was missing a setting to enable power manager. READAHEAD: was missing a ';', fixed. - RLS17.1: PATCH: Patch to linux 3.0.71 Dynamic Readahead from Chad Goodman AROMA: added 1.6 and 1.7Ghz as selections in aroma. - RLS17: RNG: added frandom support, you will need to install crossbreeder or similar to use. CPU: linaro power patch. Even though its openly available, I got it from Chad Goodman. CPU: corrected the CPU table and documented each line for clarity (Thank you chad for info) - RLS16.5: PATCH: Patch to Linux 3.0.70 - RLS16.4: PATCH: Patch to Linux 3.0.69 - RLS16.3: PATCH: Patch to LInux 3.0.68 - RLS16.2: PATCH: Patch to Linux 3.0.67 - RLS16.1: PATCH: Patch to Linux 3.0.65 - RLS16: USB: OTG works again. CPU: xondemand works. PATCH: Patch to Linux 3.0.63 - RLS15.3: (broken, dont use it) XZ: got it working (thanks thicklizard) - RLS15.2: PATCH: patch to linux 3.0.62 XZ: added xz compression to kernel. - RLS15.1: BLUETOOTH: reverted patch for bluetooth wakelock since issues appear to have started after I applied it. - RLS15: CPU: added xondemand cpu governor (thanks to chad for providing the missing piece(s) and Anryl sharing his source as an example) - RLS14.5: PATCH: Patch to Linux 3.0.61 - RLS14.4: PATCH: Patch to Linux 3.0.58 - RLS14.3: PATCH: Patch to Linux 3.0.57 had to revert the patch for the 3D clock. doesnt need it - RLS14.2: FREQ: raised default frequency from 1188 to 1350, can still be changed in aroma DEVICE: patch from Chad Goodman to help prevent (gfx2d1_clk status stuck at 'off') errors - RLS14.1: PANEL: changed brightness back to 3 since 1 didnt work. PATCH: patch to linux 3.0.56 - RLS14: Birthday Edition PATCH: patch to linux 3.0.54 PANEL: lowered minimum brightness to 1 to see if it works. BT: bluetooth wakelock fix from agrebren, courtesy of Dastin1015 AROMA: added back camera driver option in installer. - RLS13.6: PATCH: patch to linux 3.0.53 - RLS13.5: PANEL: added some missing changes for brightness on the shooteru side. - RLS13.3: PANEL: added the brightness fix to shooteru because I missed it before. no change for CDMA. - RLS13.2: PATCH: Patch to linux 3.0.52 PANEL: adjusted brightness calculation to better sense lowest brightness (thanks to Anryl for help) - RLS13.1: PATCH: Patch to linux 3.0.51 AROMA: updated the aroma config to remove the sense vs aosp option and other changes borrowed from CG. - RLS13 : SWEEP2WAKE: updates to the driver to allow config via aroma - RLS12.2: fixed version number and updated to the linaro 4.7.3 toolchain - RLS12.1: patch to linux 3.0.50 - RLS12: PATCH: patch to linux 3.0.49 TOUCHSCREEN-ATMEL: cm multitouch fix (seems to not affect sense) (Agrebren) - RLS11.1: FRAMEBUFFER: refreshrate override - may help with some sense 4.x lag - RLS11: VM: lower SYSCTRL latency values to help reduce lag (shooter_u) VM: lower latency values to help reduce lag VM: increase default MAX read-ahead OOM: dont kill kernel threads DEFCONFIG: update defconfig files for stability MENUCONFIG: add 'targeted preemption latency for CPU-bound tasks' to menu config FIX: fix typo, we actally want this to compile - RLS10: VM: Add Common VM Settings to MENU CONFIG (thanks Chad) - RLS09: Patched to Linux 3.0.48 (kernel.org) - RLS08: Patched to Linux 3.0.47 (kernel.org) - RLS07: (Thanks CG for the making this possible, no kanging please, give credit) CAMERA: allow for CM10/AOSP compatibility alongside sense 3.6/4.0 SYSFS: add misc sysfs interface for rom type (aosp/sense for example) DEFCONFIG: gsm and cdma need same name for COMMON modules to work DEFCONFIG: update defconfig for linaro topology drivers CPU: linaro arm topology drivers - RLS06: BLUETOOTH: made it work with sense and aosp roms (CG, thanks for the fix) - RLS05: CM10 camera fix (agrabren/anryl) CPU: rename cpu info BOARD: name device CPU: make use of faster L2 (and FSB) clocks L2: add 1458, 1512, 1566 L2 Clocks, and set 1404 and over to 360MHz FSB FSB: define 360MHz FSB GPU: set GPU clock defaults to max, so aroma has full control GPU: dont OC by default, allow SYSFS contol over max clock - RLS04: GENERAL: fixed shooteru directory names in zip CAM: applied camera fix in separate build for CM10/AOSP - RLS03: DEFCONFIG: had to manually patch shooter_defconfig, last commit didnt complete DEFCONFIG: upload autogen defconfig files for CDMA and GSM PATCH: patch to linux 3.0.46 SCHED: prepare for ROW IO scheduler SCHED: add BFQ IO scheduler FLASH: reduce battery level requirements for FLASH WIFI: undervolt wifi card to whitepaper spec BOARD: add thermald support to device specific files board files ARM: use generic strnlen_user and strncpy_from _user CRYPTO: add support for AES128+SHA1 encryption/decryption NET: add JIT compiler for packet filters SCHEDULER: set LOAD_FREQ to (4*HZ+61) SCHEDULER: disable GENTLE_FAIR_SLEEPERS CPU: kernel based thermal management CPU: kernel based MPDECISION CPU: raise PERFLOCK clocks to 1.5Ghz ZCACHE: update ZCACHE drivers ZRAM: update ZRAM drivers COMPRESSION: add support for Google snappy decompression/compression IO SCHED: add simpleio IO scheduler IO SCHED: add VR IO scheduler CPU: add smartass v2 cpu governor GSM support - RLS02: PATCH: patch to linux 3.0.45 (kernel.org) - RLS01: PATCH: patch to linux 3.0.44 (kernel.org) FILESYSTEM: added F2FS PATCH: ck-1 patchset ATMEL: SWEEP2WAKE: enhance driver, add ABOUT to sysfs F/SYNC: make f/sync dynamic -vs- straight on/off via sysfs THERMAL: reset some variables to pull maxclock setting from aroma vs kernel default IO: add BFQ i/o scheduler IO: add SIO i/o scheduler IO: add VR i/o scheduler BCM4329_248: undervolt wifi chipset to whitepaper spec CPU: add ZIGGY471s custom LAGFREE governor enable cmdline options LED: dynamic LED brighness mod CPU: update cpu core clock control HEADSET: limit all notifications to single-thread AROMA: add kernel side support for aroma installer THERMAL: adjust sensor ID for CDMA LINARO: MM: linaro specific tweaks/updates CPU: clean and name tables, allow OC to 1.7GHz MPDECISION: kernel based mpdecision PANEL: lower min-brighness from 30 down to 2 INPUT: sweep-2-wake for amtel (shooter/shooter_u) CDMA BOARD: adjust min/max voltage for cpu, ram, and l2 cache LZO: update to latest version of LZO driver CPU Vdd: adjust min/max voltage for cpu, ram, and l2 cache CPU: allow SYSFS (userspace) control over cpu voltage SCHEDULER: disable GENTLE_FAIR_SLEEPERS SCHEDULER: set load_freq to 4.61 BCM4329_248: allow weaker signals to be seen BCM4329_248: add sysfs control over pm=fast vs pm=max GPU: allow sysfs (userspace) control over MAX GPU CLOCK (not current clock), and set default max clock BATTERY: allow sysfs control over usb charge mode (fastcharge) LED: allow sysfs/userspace control over led notification timeout GPU-2D: help prevent gfx2d0_clk (or gfx2d1_clk) status stuck at 'off' GPU-2D MHL: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks GPU-2D: add GPU clocks 266, 228 to the STOCK 200MHz and idle at 200MHz clocks GPU-3D: set GPU clock to 320, 300, 266, 228MHz and idle at 200MHz CPU: Allow CPU-based alignment handling USB: add support for usb host mode / otg VFP: compile vfp for neon
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone