Yes, on my phone, it's working without any issues. I'm using "Butterfly-daisy-20190824-Pie-v5.5+" with "[9.0][Enforcing] AOSiP ROM"
Hi, I would to try this kernel, mostly for Gcam's fix, but it's the first time I try it. I'm on stock rom updated to January.
Is there an updated version of this kernel?
Did you manage to install the kernel without installing twrp, but just booting it?
Is there an updated version of this kernel?
Can you please explain these encryption issues you was talking about? I'm curious about them.
Did you manage to install the kernel without installing twrp, but just booting it?
I install butterfly 5.5+ on aoisp pizza and after that wifi icon is only black dot, no standard wifi icon, any fix for that?
I am also using AOSiP Pizza + Dragonheart kernel. I doesn't have any issue with wifi icon.
Earlier I used butterfly 5.5 (standard one, not "u" or something else) But it didn't have any issue either.
Maybe try dragonheart kernel.
i using my kernel with Android Q GSI, it's fully compatible. also stock Q roms supported
many custom Q roms for daisy broke 3.18 support, so this is not my busy, ask rom maintainer
Attachments
My device MI A2
ROM pixel experience official
Processor SDM 660
Can I flash MI A2 LITE or MI 8 custom kernel in my device?...
One more thing...in my device GPU adreno 514 GPU driver OpenGL ES 3.2..and frequency 650 MHz... can I change my GPU driver..?..
In my device already available OpenCL 2.0 ... But my OpenCL shown frequency only 1 MHz...
Can I increase it ?.. or can I change my driver with OpenCL ?
Please help me..
ROM pixel experience official
Processor SDM 660
Can I flash MI A2 LITE or MI 8 custom kernel in my device?...
One more thing...in my device GPU adreno 514 GPU driver OpenGL ES 3.2..and frequency 650 MHz... can I change my GPU driver..?..
In my device already available OpenCL 2.0 ... But my OpenCL shown frequency only 1 MHz...
Can I increase it ?.. or can I change my driver with OpenCL ?
Please help me..
Attachments
My device MI A2
ROM pixel experience official
Processor SDM 660
Can I flash MI A2 LITE or MI 8 custom kernel in my device?...
One more thing...in my device GPU adreno 514 GPU driver OpenGL ES 3.2..and frequency 650 MHz... can I change my GPU driver..?..
In my device already available OpenCL 2.0 ... But my OpenCL shown frequency only 1 MHz...
Can I increase it ?.. or can I change my driver with OpenCL ?
ROM pixel experience official
Processor SDM 660
Can I flash MI A2 LITE or MI 8 custom kernel in my device?...
One more thing...in my device GPU adreno 514 GPU driver OpenGL ES 3.2..and frequency 650 MHz... can I change my GPU driver..?..
In my device already available OpenCL 2.0 ... But my OpenCL shown frequency only 1 MHz...
Can I increase it ?.. or can I change my driver with OpenCL ?
Attachments
already here - stock Q supported, gsi Q and R also
if you want support in custom rom, then ask developers who build them adding 3.18 kernel support
Daisy is the name of our phone. Many phones have names like beryllium for the Poco F1 or willow for Redmi Note 8T.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
34=BUTTERFLY KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Pie base: CAF & Prima Tag by LA.UM.7.6.r1-04500-89xx.0
Oreo base: CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
Legacy base: not updated pure sources from MiCode github
(prima tag LA.UM.7.6.r1-05500-89xx / LA.UM.6.6.r1-11300-89xx.0)
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolting & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Added WireGuard 0.0.20190601
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v4 installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new settings for a smooth interface in installer (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" *#TODO
- Installer include Magisk preserve#TODO
<< download Pie v5.5 || download Pie v4.4 >>
<< download Oreo v5.5 || download Oreo v4.4 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk#TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
Butterfly kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_butterfly
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-04-15 (UTC +0)
Created: 2019-04-07
Last Updated: 2019-08-08
.11=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1804 MHz
GPU governor: msm-adreno-tz or guardian
Adreno idler: on
Tune Boeffla Wakelock Blocker: read this manual
CPU Hotplug: see attached screenshot
# Give ~10 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: set highest
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~8 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: intelliactive, blue_active or nonconservative
CPU max freq: set highest
GPU governor: performance or msm-adreno-plus
Adreno idler: on
CPU boost: on
CPU boost freq: set to 1.84, 2.0 or 2.2GHz
CPU Hotplug: off
# Give ~5 minutes SOT per 1% battery while web browsing #
.8Kernel updated to v4
Normal || Normal Undervolted
OverClocked || OverClocked & Undervolted
Changelog for Pie legacy v4:
• WireGuard 0.0.20190601
• prima WiFi updated to LA.UM.7.6.r1-04800-89xx
• fix for goodix-fp gestures on stock (thanks to @artyom5613 & [email protected])
• also in the installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's settings
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• DT2W [off by default] (now it's /proc/touchpanel/wakeup_gesture for both panels) and fixed gcam focus as in the latest commits of Offain;
• memory optimization;
• added a couple of governors - xperience & alessa;
• I/O optimization;
• battery life optimization;
• added a block to wakelock from wifi;
• I returned all frequencies to stock (all even builds without serious experiments, if everything is normal, I'll upload the legacy normal code to the github)
Overclocking and undervolting changes:
• GPU max freq now is 725MHz
• voltage reworked for more stability for all users - slightly increased
Bugfix: installer reworked to saving SELinux context for init file (2019.06.12)
BEFORE INSTALL YOU MUST READ THIS and THIS
.8Kernel updated (download v2)
Changelog v2:
Pie CAF & Prima updated to LA.UM.7.6.r1-04500-89xx.0
Improved interactive CPU governor (patch from Franco kernel)
Improved CPU boost and enable it (patch from Franco kernel)
Reworked conservative and nonconservative CPU governors
Reworked guardian, balanced and msm-adreno-plus GPU governors
Kernel installer now also support custom ROMs
Also have some changes in Power profiles6
problems with fp in the 10.0.7.0 base
i specially using original code from xiaomi for legacy build
with stock kernel people reported about similar problem too
try fix from attachment
.
