[Kernel] Clemsyn-Blades-CPAjuste-supercurio OC kernel for 3.2 elite ver 22

Search This thread

chappatti

Senior Member
Sep 3, 2007
1,503
295
Thanks folks,

I was wondering why my tablet would'nt boot up :D. I was generally trying different kernels to try and resolve the hdmi video out scaling on my HDTV. Heard kernels can make a diff.

The OP should be modified to reflect a dead thread and the version of the kernel! Would be helpful......
 

u170who

Senior Member
Jun 8, 2007
118
8
Brooklyn, New York
HELP! Can't install any custom kernel after returning to stock

Hi, I was wondering if you could help. I had a custom ROM and Kernel on my TF101 but had to send it in to repair, so i unrooted and restored the stock software to it. After i got it back, i was able to root, but i am unable to install any custom kernel and only get the Bot with the exclamation when trying to get to recovery. Any advice please? I tried the 2 newest easy root methods (i forgot what they are called) but can't get anywhere.
Thanks in advance.
 

Asked Man

Senior Member
Jan 18, 2012
98
16
Rio de Janeiro
You should had opened this in the Questions sections

And not raised a dead thread. You are seeing the bot because you are using the stock recovery, which is useless for installing custom stuff.

You can either use EasyFlasher to flash a custom recovery or you can follow instructions at TWRP 2.3.1.1 thread, since your device is already rooted.

Hi, I was wondering if you could help. I had a custom ROM and Kernel on my TF101 but had to send it in to repair, so i unrooted and restored the stock software to it. After i got it back, i was able to root, but i am unable to install any custom kernel and only get the Bot with the exclamation when trying to get to recovery. Any advice please? I tried the 2 newest easy root methods (i forgot what they are called) but can't get anywhere.
Thanks in advance.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 152
    Version 22 is up
    Here are the changes

    1. Utilizing TCP congestion Veno in IPv4
    2. Added handler for kernel command functionality
    3. Added ioctl to set/get clk rate
    4. reduce HDCP re-negotiation delay
    5. fix hdcp hotplug issue
    6. disable windows in dc disable
    7. Avoid timer calibration on slave cpu
    8. cross check connection state on receiving interrupt

    Here is the link

    Version A

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver22a.zip

    If you like our work, please donate :)

    -----------------------------------------------



    Version 21 is up

    1. Added "conservative" governor when screen is off for better mp3 playback
    2. Enabled JRCU_lazy for less memory barriers in kernel

    Here are the link

    A version (with voodoo sound module included in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21a.zip

    B version (no voodoo sound module included in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21b.zip

    LMK how it goes.

    BTW, PLEASE donate, donations are greatly appreciated so please do not hesitate :) Thanks

    _______________________________________________________________________

    Version 20 is up

    20a

    1. Voodoo sound included in the kernel
    2. Fixed usb lag
    3. Disabled JRCU_lazy

    Here is the link.

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20a.zip

    20b

    1. No voodoo sound in the kernel
    2. Fixed usb lag
    3. Enabled JRCU_lazy

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20b.zip

    LMK how it goes.

    Please dont hesitate to donate, it is greatly appreciated. Thanks

    ----------------------------------------------------------------------

    Version 19 is up

    Here is the link

    Version a (voodoo sound in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19a.zip

    Version b (no voodoo sound in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19b.zip

    Lmk of any reboots. Thanks.

    -----------------------------------------------------------------------

    Version 18 is up ;)

    1. Fixed typo in JRCU implementation
    2. Disabled watchdog timer
    3. fixed a few unbalanced IRQ for better resume
    4. Updated emc clk for multiple dcs
    5. usb : ECHI : synchonize shutdown and resume
    6. Fixed wrong handling of dc enable
    7. Fixed wrong aspect ratio information
    8. Add underscan capability exposure via sys

    BTW, Big thanks to all who donated and for the hdmi cable that I am able lto test my kernels now with hdmi

    Here are the link

    18a (with voodoo module in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18a.zip

    18b (no voodoo module in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18b.zip

    Please donate :) Thanks

    LMK how it goes.

    Update: Files were swapped by mistake..it's now fixed

    -------------------------------------------------------------------------
    Versino 17 is up :)

    1. Implemented clean code of JRCU (Simpler RCU implementation for SMP systems)
    2. Forced USB charging
    3. Echi, changes

    17a

    Note: This kernel has voodoo included in the kernel so please delete your voodoo module if you have one.

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17a.zip

    17b (no voodoo in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17b.zip

    BTW, if you like our work, please dont hesistate to click on our donations button. Thanks

    LMK of any issues. Thanks.

    -----------------------------------------------------------------------------------

    Versino 16 is up :)

    1. Hdmi, echi and spi changes as per nvidia's
    2. i2c recovery implemented instead of simple reset

    16a (With voodoo sound built-in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16a.zip

    16b (No voodoo sound in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16b.zip

    BTW, if you like our work, please don't hesitate to click on donations button :) It will be greatly appreciated. Thanks.

    -------------------------------------------------------------------



    Version 15

    1. Fixed the "waking up interminently bug"

    Please let me know how it goes

    15a (HD and Clemsyn Combo)
    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15a.zip

    15b (Revolver and Prime)
    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15b.zip

    PLEASE CLEAR YOUR DALVIK-CACHE AFTER FLASHING THIS KERNEL. THANKS

    Please do not forget at your donations are greatly appreciated so don't hesitate to click on our Donate button :)

    -------------------------------------------------------------------------------------------

    Version 14 is up

    1. Updated hdmi per nvidia's
    2. Changed timings in kernel to use Jew's memory timings and lowmemory values (no need for init.d script)
    3. Enabled adb debugging as per request
    4. Increased 2d/3d timings to 425 (missed to increase it when I changed base)

    Here is the link

    14a (For HD ROM and Clemsyn Combo)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14a.zip

    14b (for Prime and Revolver)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14b.zip

    If you like our work, pls click on our donations button...It will be greatly appreciated. Thanks.

    ---------------------------------------------------------------------------------





    Version 13 is up

    1. Based on 8.6.6.9 kernel
    2. Increased voltage on 1544 frequency
    3. Added VR scheduler per mike1986 request
    4. No voodoo sound at the moment

    WARNING: The voltages are up so please Undervolt according using PimpMyCpu

    BTW, please click on our donations button if you like our work. THANKS :)

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver13b.zip

    -------------------------------------------------------------

    Version 12 is up with the following changes.

    1. Lowered bus speeds in high frequencies to >1000
    2. Lowered multiplier to reach the appropriate frequency for the new bus speed
    3. Used 1646 instead of 1656 frequency.

    With voodoo sound in kernel:
    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12a.zip

    For prime and revolver (no voodoosound in kernel)
    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12b.zip

    BTW, dont hesistate to click on our donation link. It will be greatly appreciated. Thanks.

    ---------------------------------------------------------------------------------
    Verson 11 is up with the following changes

    1. Included timings by Blades
    2. Version a (voodoo in kernel) Version b (no voodoo in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11a.zip

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11b.zip



    ** If you like our work, pls click on our Donation link under our sig :) **

    ------------------------------------------------------------

    Voodoo version 10 is up with the following changes

    1. i2c arbitration handling of error changed from simple reset to recovery
    2. Increased epp and mpe timings as per Blades
    3. Voodoo Sound remove from kernel for better compatibility with ROMS

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver10.zip

    LMK how it goes and Please click on donation link if you like our work :)

    ** Testing Blades latest OC timings at the moment with voltage increases across the board **

    ---------------------------------------------------------------------------------

    Voodoo version 9 is up...

    1. Fix hdmi issues

    Please report any waking up issues.. Thanks

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9.zip

    ** Voodoo sound is built in the kernel so please delete voodoo module for Prime 1.7 and Revolver ****

    Version 9b (for Revolver and Prime with no voodoo in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9b.zip

    -------------------------------------------------------------------------


    Version 8 kernel is up and only for tegras getting bootloops

    PLEASE STAY IN VERSION 7 IF YOU HAVE NO BOOTLOOPS SINCE IT HAS BETTER MEMORY TIMINGS

    1. Lessen memory timings for Hynix memory

    Version 8a (not for Prime unless you delete the voodoo module)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8a.zip

    Version 8b (for prime)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8b.zip

    Please let me know how it goes

    Donations are greatly appreciated so please do no hesistate :)

    -------------------------------------------------------------------------
    Kernel version 7 is up
    1. USB and HDMI optimizations per nvidia

    Version 7a (not for Prime 1.7 unless you delete the voodoo sound module)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7a.zip

    Version 7b for Prime 1.7 (no voodoo sound in kernel)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7b.zip

    Again, donations are welcome and greatly appreciated :)

    --------------------------------------------------------------------------------------


    Kernel for 3.2 Honeycomb version 6 is up

    1. Trackpad functional (thanks asus)
    2. Less stutter in portrait mode (subjective though, so need your feedback on this)

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver6.zip

    Btw, Donations are welcome and greatly appreciated :)

    -------------------------------------------------------------------------

    Kernel 3.2 HC ver 5 is up

    1. Updated per nvidia and fixed an issue with nvidia's changes not compiling
    2. Please see my github for changes :)

    TO BE ABLE TO USE WITH PRIME 1.7 PLEASE DO THE FOLLOWING BEFORE INSTALLING KERNEL

    1. Delete voodoo-sound.ko in /system/lib/modules by using file xpert or root explorer
    2. Turn off and install kernel

    BTW, if you like our work please click on donations button under our sig, it will be greatly appreciated. Thanks.

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver5.zip

    --------------------------------------------------------------------------------------------------------------------

    -----------------------------------------------------------------------------------------------------------------------------------
    Kernel 3.2 HC ver 4 is up - Not compatible with Prime 1.7 or Revolver 2.0 (only for Stock Rooted Rom and Clemsyn ROM combo)

    1. Reverted Memory speed changes
    2. disabled mmap on framework
    3. nvmap : fix GART pinlockups
    4. nvmap: single page allocation policy corrected

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver4.zip




    Kernel 3.2 HC ver 3 is up - not for Prime 1.7 beta or Revolver 2.0 (only for Stock Rooted 3.2 ROM and clemsynROM)

    1. EMC changes
    2. Memory speed changes

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver3.zip

    BTW, donations are greatly appreciated ;)

    -----------------------------------------------------------------------------------

    Kernel 3.2HC ver 2 is up - not for Prime 1.7 beta (use version 1 for Prime 1.7)

    1. Ext4 on system/data/cache data changed to writeback mode

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver2.zip

    Semi-Elite version (not tested because wife took my transformer to work, so need feedback on this)

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2semi-elitever2.zip

    ----------------------------------------------------------------------------------------

    Kernel for 3.2 HC is up


    1. Same OC as version 18
    2. Horizotal scrolling smooth even upside down but ufortuately vertical still stutters

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver1.zip
    -----------------------------

    Version 18

    Here are the changes

    1. Max overclock set at 1.640 as per blades
    2. avp/vde/bsea/bsev/sclk/hclk overclocked to 300
    3. Read_ahead set at 1024 in kernel so if you are in stock rom, this will set at 1024.
    4. slight changes in interactive governor
    5. GPU 3d/2d overclocked at 425
    WARNING: Not all transformer can take these timings(only elite tegras) so please backup, flash with caution and make sure you are familiar with nvflash

    LINK:

    www.tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio-Cpajustes1.6ver18gpu.zip
    -------------------------------------------------------------------

    BTW, if you like our work, pls click on the donations button under our sig. Thanks :)


    Version 17

    1. Tweaked voltages and increased max to 1.646
    2. Increased voltages (please undervolt via PimpmyCPU)
    3. A few avp changes and usb changes per nvidia

    Here is the link

    www.tunerspotter.com/clemsyn/Clemsyn-Blades1.6version17.zip

    If you like our work, pls click on donations button under our signature. THANKS!
    **********
    Version 16 1.6ghz
    **********

    1. Minor changes in voltages

    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel16.zip

    ***********************************************
    1.7 ghz!!!!!!!! ONLY FOR THE SUPER ELITE TEGRAS
    ***********************************************

    1. Maxed cpu and core voltages as per nvidia's

    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.7rel15.zip

    Please be advised that this is the max I would go...no more.

    BTW, if you like our work, pls click on the donation button. Thanks.

    I'll be going on vacation so no updates for awhile :)

    ----------------------------------------------------------------------------------------------

    Version 15 is up

    1. Reverted back to Blades original voltates
    2. Increased voltage for 1.6ghz for better stability.
    3. Changed clock rate limit for 3d
    4. Bootup speed reverted back to 1ghz

    Here is the link


    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel15.zip

    If you like our work, please click on our donate buttons :)

    -------------------------------------------------------------------------

    1. NTFS Fully functional !!!!
    2. Few changes in kernel
    3. Added few erratas for stability
    4. PS3 controller functional :)
    5. Undervolting via PimpmyCPU or Setcpu
    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel13.zip

    Also available now at KERNEL MANAGER ;)

    If you like our work, please click the donations button under our username :) Thanks

    -----------------------------------------------------------------------------


    Release 12 - built from source with OC code and undervolting and voodoo sound

    1. Built from source (Thanks Asus)
    2. Undervolting via Pimpmycpu by Cpajuste's code
    3. Overclocking via Blades
    4. Voodoo sound by Supercurio
    5. oVERCLOCKS AUTOMATICALLY TO 1.4GHZ, NO NEED FOR CPUMASTER OR SETCPU
    6. NTFS not yet working

    LINK

    ]
    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel12.zip

    IF you like our work, pls click on our DONATION button under our username. THANKS.

    ----------------------------------------------------------------------------------

    6/22/11 - Version 11b

    1. Fixed Elpida memory scaling

    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6ver11b.zip

    BTW, if you like our work, pls click on DONATE button under username. THANKS :)

    ------------------------------------------------------------------------------------------------


    6/21/11 - Version 11

    1. Increased pinmux driver strength of csus sensors
    2. Added few changes via nvidia (see git)

    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurioversion11.zip

    6/20/11- version 10b

    1. Added voodoo changes by supercurio
    2. Added init.d support in the kernel (not sure if this will work but any help from ROM devs to test will be appreciated)
    3. Latest OC by Blades

    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio1.6rel10b.zip

    BTW, if you like our work, please help me buy some diapers :)

    ----------------------------------------------------------------------------------------------------------------


    6/20/11

    Version 10 release

    1. Same as experimental version B but added Blades' latest OC changes

    Here is the link

    http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6version10release.zip

    If you like our work, pls help me buy some diapers :) (just got the news, wife is pregnant)

    ------------------------------------------------------------------------------------------

    6/18/11

    Experimental version 10b...Here are the changes.

    1. Reverted memory to 256 (original size) to prevent issues from other apps (I think 512 was a bit of an overkill)
    2. Kept increased memory video framebuffers
    3. Updated a UART changes in the board.

    Here is the link

    http://tunerspotter.com/clemsyn/Experimentalversion10b.zip
    http://www.megaupload.com/?d=CH5EBQGA

    BTW, if you like our work, don't forget our beer :)

    -------------------------------------------------------------------------------------------------------------
    6/18/11

    Experimental version 10...Here are the changes

    1. Enabled NTFS (pls report if it works or not)
    2. Increased tegra video memory for better performance (LMK how your experience is)

    Here is the link

    http://www.megaupload.com/?d=WF1DAKCM

    ----------------------------------------------------------------------------------

    6/18/11 Version 9

    1. Disabled Jazelle Erratta and Thumb EE instructions
    2. Enable PL310 errata, 752520 errata and 751472 errata

    Here is the link

    http://www.megaupload.com/?d=M1H9IZEM

    IF you like our work, pls buy us a beer :)

    --------------------------------------------------------------------------------------

    6/17/11 Version 8b

    Changes:

    1. Pinmux changes
    2. Updated BT drivers for kernel (hopefully fixes playstation controllers but I dont have any BT device at the moment)
    3. 3d/2d GPU overclocked at 350000 to help with artifacts on elite version (had 400000 for 3d and 350000 for 2d)

    Here is the link

    http://www.megaupload.com/?d=QPRBIEA8


    6/16/11 Version 8a Elite

    1. fix on backlight (pls let me know how it works for you)

    http://www.megaupload.com/?d=1VKHDT0C


    6/15/2001 -- INTRODUCING MY VERSION 8 ELITE

    Changes are as follows:

    1. Tweaked memory settings and video drivers to FIX BROWSER CRASH - finally :)
    2. Added bsea clk rate to the kernel

    Here is the link

    http://www.megaupload.com/?d=WE5GC5HC

    IF you like our work, pls buy us a beer (still waiting my first beer) :)

    --------------------------------------------------------------------------------------------------

    6/14/2011

    Version 7a ELITE

    1. enabled config erratas for cortex 9 cpus
    2. enabled nvmap carveout killer to help with browser crashing (still dont solve it though).
    3. crypto AES updated to support dual cores

    Here is the link.

    http://www.megaupload.com/?d=SP6U6XAU

    UPDATE: FOR BROWSER CRASH SET ENABLE PLUG-INS to ON DEMAND (browser setting--Advance)

    6/13/11 Version 7 Released

    Changes:

    1. Moved ALSA to spdif (hopefully will fix audio in hdmi)
    2. Added DSI support in video drivers
    3. few optimizations in cache handling of memory added

    Here is the link

    http://www.megaupload.com/?d=PQV15NWC

    6/13/11

    Elite version of Ver 6 with a few changes:

    1. Used 4.4.3 compiler
    2. Updated serial drivers
    3. Updated video drivers in the kernel

    Here is the link

    http://www.megaupload.com/?d=SEL0MQ3L

    6/12/11

    Updated version 6 with Accelorometer fix and overlay fixes in video drives
    Here is the link

    http://www.megaupload.com/?d=QZCNRAWO


    --------------------------------------------------------------------------------------

    6/12/11

    Version 6 is updated with following changes

    1. Fixed camera issues
    2. Added a few fixes in dma and gpios
    3. reverted DAS driver back to original
    4. fixed a few video drivers

    Here is the link

    http://www.megaupload.com/?d=8IQZQSLV

    Original kernel Asus kernel

    http://www.megaupload.com/?d=GSIHUPJ6

    BTW, If you like our work, pls buy us a beer :)

    --------------------------------------------------------------------------------

    6/10/11

    UPDATE

    Release 5a: Here is the link

    http://www.megaupload.com/?d=GLDLWF2N

    Changes:

    1. SMP fixes

    Update 6/8/11 --- RELEASE 5 ---------------------

    New changes to kernel:

    1. CPU OC'd still at 1.6ghz
    2. 3dGPU, 2d GPU, vde kept at stock
    3. Upgraded Audio driver to DAS
    4. GPIO fixes in kernel included

    Please let me know if it fixes audio issues. Thanks.

    http://www.megaupload.com/?d=LHGNQXTO

    BTW, if you like our work, please buy us a beer :)

    -----------------------------------------------------

    Update 6/6/11 release 4

    Elite tegra version since not all tegra can run this kernel. The reasons are as follows:

    CPU OC'd at 1600 (1000 default)
    3d GPU OC'd at 400000 (300000 default)
    2d GPU OC'd at 375000 (300000 default)
    VDE OC'd at 300000 (250000 default)

    Again, only for the elite tegras out there. Here is the link

    http://www.megaupload.com/?d=JMVUMP0A

    Please create a backup, then install kernel, then clear Dalvik-cache, the Wipe Cache partition. Goodluck.

    BTW, if you like our work, please buy us a beer or two :)

    Will create a normal version soon. Also this kernel is updated to nvidia 10.11.6 standards (except for wifi and usb at the moment)

    Update 6/5/11 Release 3

    http://www.megaupload.com/?d=2ZJI1J2H

    Reverted to 4.4.0, CIFS built-in the kernel, updated to 1.5 ghz for better stability (I think)

    Update 6/5/11 Initial Release 2

    Fixed Camera/Sound/Flash etc, next up would be voltages for OC. Used 4.4.3 toolchain for better compatibility.

    Source is up on my github (I apologize, its kinda messy but needed to release our kernel)

    Here is the link

    http://www.megaupload.com/?d=MNJF34WJ

    BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)

    And if you like my work, please buy me a beer :) Also you input is greatly appreciated

    GITHUB

    https://github.com/clemsyn/LatestAsusOC
    11
    The voodoo-sound kernel object is causing system lockup with Clemsyn-Blades 3.2 OC.

    - Clemsyn-Blades 3.2 OC (v1-4) + PRIME 1.7-alpha: OK, because init.d script from ROM does not load voodoo-sound.ko

    - Clemsyn-Blades 3.2 OC (v1) + PRIME 1.7-beta/final: OK, because init.d not enabled by kernel

    - Clemsyn-Blades 3.2 OC (v2-4) + PRIME 1.7-beta/final: bootloop, because init.d enabled and the bootscript loads voodoo-sound.ko at bootup

    - If you're running Clemsyn-Blades 3.2 OC (v1) + PRIME 1.7 (any version, eg the final), you can immediately lockup your system by loading voodoo-sound.ko:

    Code:
    su
    insmod /system/lib/modules/voodoo-sound.ko

    - To use Clemsyn-Blades 3.2 OC (v2-4) with PRIME 1.7-final, do following:
    1. Install PRIME 1.7-final
    2. Delete /system/lib/modules/voodoo-sound.ko (eg rename voodoo-sound.bak)
    3. Install Clemsyn-Blades OC kernel
    4. Everything should be fine, voodoo-sound enabled in kernel
    5
    Having issues with usb delays. Mouse and any other

    Sent from my Transformer TF101 using Tapatalk

    Will fix this usb delays on version 20 :) hopefully it will also fix reboots. Will release soon.

    OK, version 20 is up...please let me know how it goes.
    4
    Version 16 is up...it would be awhile for the next update :)
    4
    version 14 ready, will upload when I get home