[KERNEL]-[CM13/14]-[MM/N] [OFFICIAL] Remix Kernel [3G|LTE|DS] - [OC/UC/UV/OTG]

[DarkFrenzy]

Features

Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers

Additional CPU hotplugs:

MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug

Additional Governors:

Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove

Additional I/O Schedulers:

SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN

DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544

Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock

As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app

New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources

Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"

Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!

Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir

XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini

Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors

Version Information
Status: Stable

Created 2016-07-29
Last Updated 2017-05-21

 

[DarkFrenzy]

Kernels for testing

attached below

 

[axiel7]

Thanks bro!!!!

 

[arsm74]

Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?

 

[rayzen6]

Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?

Give him boot.img from ur ROM zip,,he'll make one.

He is so kindful person.

And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.

And BTW bliss version for duos working like a charm on latest blissM build, thanks.

 

[o0chtm0o]

Hi!

Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.

Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.

DOWNLOADS:

GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1

Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link

Please, correct the colored text :good:

 

[DarkFrenzy]

Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link

Please, correct the colored text :good:

hehe silly mistakes! thanks for that. your bliss is ready

 

[flipeicl]

http://xdaforums.com/showpost.php?p=65273428&postcount=2323

It is for RR 5.6.3 from Blackjubel.

 

[DarkFrenzy]

Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?

give me the boot.img

 

[DarkFrenzy]

http://xdaforums.com/showpost.php?p=65273428&postcount=2323

It is for RR 5.6.3 from Blackjubel.

for GT-I9190 ???

 

[o0chtm0o]

hehe silly mistakes! thanks for that. your bliss is ready

Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:

 

[flipeicl]

for GT-I9190 ???

Sorry, it's for i9192.

 

[DarkFrenzy]

Sorry, it's for i9192.

too late i uploaded it with GT-I9190 kernel. now removing.

 

[arsm74]

cm13 stock (k2wl) boot image for i9192

Give him boot.img from ur ROM zip,,he'll make one.

He is so kindful person.

And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.

And BTW bliss version for duos working like a charm on latest blissM build, thanks.

here is the boot.img as requested for cm13 stock build for i9192

 

[DarkFrenzy]

here is the boot.img as requested for cm13 stock build for i9192

updated. check OP
(now going to sleep )

 

[arsm74]

updated. check OP
(now going to sleep )

Tks @DarkFrenzy...appreciate it

 

[o0chtm0o]

Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).

Thanks for your help and support!

 

[DarkFrenzy]

Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)

Thanks for your help and support!

EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish

i have already uploaded the bliss6.1 is that not latest ?

 

[heilbron]

FM radio not working

...
GT-I9192
....
CM13 KERNEL
....

A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!

 

[KyeWalker]

@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195

Thanks again for your contribution